Counting matching models…
You can scale to suit but at 100% it just works and doesn't use that much filament. 0.15mm layer height using a brim. If you print multiple on 1 bed, make sure your retraction settings are dialed in as it will create multiple artifacts.
Own a piece of automotive history with this 3D printable STL model of the Mercedes-Benz SL300. This classic car replica is perfect for automotive enthusiasts looking to display timeless design and elegant engineering in their collections…
can be printed without supports in PLA and be connected on the pins with glue
Model of a Sl300 made from a 3D Scan. Modified for FDM Printers watertight Layerhight: 0.15 - 0.2 Material: PLA Infill: 10% Supports: yes
Printed on Elegoo Neptune 3 Plus
Print upside down laying on the roof without supports.
This model of a Goodman handle has been specially developed for the Sofirn SD05 and Wurkkos DL30 diving lamps. Print out all parts remove the supports insert the nuts for the screws screw everything together Dieses Modell eines Goodman…
L300 CarPlay unit made for Honda cb1000r printed in PETG The model use the OE screws and rubbermounts The model i made to make a slick mount that look almost OE and is as minimal as possible 4x 5mm nuts 4x 5x30mm bolts the carplay unit i…
Modified switch bracked for 3Dsets buggy for those who use hobbywing 16BL30. Use this two parts instead the original Switch Bracket A / B on page 63 of Build Guide Also you will need to use screw M3x16, not listed M3x14 This design…
Case for the WEL3005 electronic load module with 4mm banana plug sockets and XT60 connector mount. The load module itself can be powered from an USB-C PD Breakout module such as https://de.aliexpress.com/item/1005004386869398.html
Navigation bar mount for EKIY MTC-14 (same as EKIY L300) Carplay / Android Auto head unit. You can use it to attach head unit to 22mm navigation bar or handlebar of the same size. You would need following fasteners: 4x M3x5 or M3x6 heat…
Repairs Elko L3033 light button by adding additional structure inside of existing button. It will look exactly the same as original part, but will function much better and last longer. Print part from ABS or ASA because it needs to handle…
Holder for Saft VL30P Fe LiFePO4 https://youtu.be/gAnFsZmzqos Category: Other
A little shelf in which you can put your topping stack. It prevents the top one from sliding around on the bottom one and getting misaligned. The top unit is secured pretty good since its feet fit nicely into the holes, however, the…
While installing the Hobbywing 16BL30 combo in my Typhon Grom, I couldn't figure out how to organize everything while still being able to lock the body in place. I run short CNBL 1500mAh packs so I don't need the entire length of the…
About model Optimised and prolonged inner handle for Mitsubishi Delica's sliding doors. Made for a friend's offroadsafari.cz orange Delica. ASSEMBLY ! You need to put your original steel nut into plastic insert first, rounded side in.…
These files go with the DIY Laser Engraver Video series by MakersMashup. You can use whatever diode laser you like for this build and can easily modify the mount in tinkercad. STEP and other files will be available soon for download as…
Print requires supports. The defaults in orcaslicer seem to work.
You can reuse the original 4 screws and rubber gaskets. Hardware you need: - 2 x M4 Nuts - 2 x 35mm M4 bolts
The holder for my Fenix HL30 headlamp started to crumble down, so I made a new holder for it. It is not in any way an exact replica of the original holder, but it does the job. I also added 2 button covers, so the light doesn't gets…
This is a barrel band I made for my SL30, it fits fairly snug and is about a thin as you'd want to make one. I made mine in PETG, but other filaments would probably work just fine. If you find that it's difficult to get on or off as the…
I wanted to make a mount for the Maglite ML300LX Flashlight just for fun. Parts needed: 1x 35mm m3 bolt, 1x m3 nut, 2x Standard Zip Ties, 1x Maglite ML300LX flashlight. I would print 2 because the flashlight is very heavy. Printer I used…
About model Modified design of a model which can be found on Thingiverse. Compatibility Should fit to Delica, L300, L400 (1986 - 2004) Print info It's an harder print , due to stability issues of thin walls untill they are connected with…
It is the same as original (see https://www.printables.com/model/1053284-standalone-filament-sensor-happy-hare-ercf-tradrac ), just for different lever version. I like the bigger arc of D2F-L30 more.
Maglight holder for: Mini maglite AA ML300L D-Cell Infill 30% PLA
a cover for the rotating part of the LL300 spectra laser
I made a rear view mirror mount for my Mitsubishi Delica. The diameter of the ball for fastening is 14mm. This is a trial version for now, perhaps it will improve.
Stay organized and efficient in your workshop with this custom pegboard holder designed specifically for the Bosch Professional GLL30 laser. The unique design features a dedicated slot to securely mount your 360° Flexible Mounting…
I had a couple of A-101 Dekatrons that I wanted to use for a project, and set out trying to source some suitable PL30-2P sockets for them. Unfortunately it seems that these sockets have become unobtainium, as I've been unable to find…
Top mount for Rockbros RHL3000 bike lamp. Uses the original plastic part but puts it on the top of the light instead of the bottom. Allows for mounting below handle bar and still using the correct asymmetric light output. Hardware needed:…
There are two revisions: With three M5x40 hex socket screws with square nuts. Preferred printing orientation in the red colored photo. With two M5x20 screws and two M5 threaded inserts. Preferred printing orientation in the green colored…
This model is made for L300Pro M linux navigation, to tighten this i use M5 Allen screw and the screws included with the navigation
Own a piece of automotive royalty with this 3D printable model of the iconic Mercedes-Benz SL300 "Gullwing". This model flawlessly recreates the distinctive gullwing doors and elegant lines of this classic sports car, expertly sliced for…
Own a piece of automotive royalty with this 3D printable model of the iconic Mercedes-Benz SL300 "Gullwing". This model flawlessly recreates the distinctive gullwing doors and elegant lines of this classic sports car, expertly sliced for…
The model is to mount the iFlight BLITZ M10 GPS V2 - 25x25 GPS on a V3 frame which replaces the O4 canopy.
# # # # # # # # # # # # # DISCLAIMER !!! # # # # # # # # # # # # # UPS IS DANGEROUS. BE CAREFULL, ANY WORK PERFORMED ON UPS SHOULD BE WITH AC POWER AS WELL AS BATTERY UNPLUGED!!! I AM NOT RESPONSIBLE IF YOU INJURE OR KILL YOUUSELVE! This…
My Rigol DL3021 works fantastic but, as with most electronic loads, the input lacks diversity. There are times I need to test a small load and do not require heavy gauge wire to be connected to the DUT. Its a pain, at least for me, to…
The Kenwood BL306 is quite a nice tabletop blender, minimalistic but very functional. The jug however although ABS tends to break (especially when dropped, BTDT). So to the rescue here's a replacement. Should print in any filament except…
Custom holder for Leatherman Supertool300 in it's leather pouch on a pegboard (8mm hole). See my other peg mounted accessories at https://www.printables.com/@Morbier/collections/1571695
This is a harmonic dampener I made for the SL30. It helps reduce harmonic vibrations, center, and stiffen the shroud and barrel assembly. It is meant to slide over the barrel and allow the shroud to slide over it. Installing is pretty…
Use this yoke with a Howard Leight Honeywell VS130 VeriShield earmuff headband or equivalent. You can purchase the earmuff from Amazon , or only the headband as a spare, if it's available in your country. Bend the springy headband wires…
This is a simple clip that securely fastens a TOPS2 power supply on top of an L30BT power supply. It also has variants to hold cables and a Picoscope 2000A on the sides of the supplies. There are short and long versions of the cable…
Use the Beyerdynamic DT1xx Ear Pad with this adapter for your STAX SR-Lxxx Earspeaker.
Make sure that you have supports when printing ... see the .3mf-file
Schablone für XS Verbinder von Scheulenburg Platte 30mm Abstand 32mm zum Rand Mehr Infos von der Seite https://www.lignoshop.de/verbindungsbeschlag/korpus-moebelverbinder/XS-Verbindungs-System/
Tried getting the "SCORPIO" fan duct to fit my Smartrapcore XL300 Tinkercad is as far as my cad skills go. Print Settings Printer: Smartrapcore XL300 Rafts: No Supports: No Resolution: 0.3 Infill: 20% Category: 3D Printing
The Alpicool CL30 comes with slots that allow you to put in a divider. This divider fits within those slots. Printed in PETG 4 top, bottom and walls. 15% infill. Added .step in case people want to remix to fit different Alpicool models.
Own a piece of automotive royalty with this 3D printable model of the iconic Mercedes-Benz SL300 "Gullwing". This model flawlessly recreates the distinctive gullwing doors and elegant lines of this classic sports car, expertly sliced for…
Own a piece of automotive royalty with this 3D printable model of the iconic Mercedes-Benz SL300 "Gullwing". This model flawlessly recreates the distinctive gullwing doors and elegant lines of this classic sports car, expertly sliced for…
Own a piece of automotive history with this 3D printable STL model of the Mercedes-Benz SL300. This classic car replica is perfect for automotive enthusiasts looking to display timeless design and elegant engineering in their collections…
The model is to mount the iFlight BLITZ M10 GPS V2 - 25x25 GPS on a V3 frame which replaces the O4 canopy.
You can reuse the original 4 screws and rubber gaskets. Hardware you need: - 2 x M4 Nuts - 2 x 35mm M4 bolts
This model of a Goodman handle has been specially developed for the Sofirn SD05 and Wurkkos DL30 diving lamps. Print out all parts remove the supports insert the nuts for the screws screw everything together Dieses Modell eines Goodman…
While installing the Hobbywing 16BL30 combo in my Typhon Grom, I couldn't figure out how to organize everything while still being able to lock the body in place. I run short CNBL 1500mAh packs so I don't need the entire length of the…
Enlarges Brake Pedal. Best printed in ASA. Recommend 40% infill. Should still work in other materials but make sure its good and strong. Secure with a screw or bolt with washer from below.
This is a simple model for the PRKL30 case, with a gasket mount style. Requires hot inserts for top case, and gaskets. The bottom part of the case has a place for the battery. KB can be found here: https://github.com/ErkHal/PRKL30 Case…
Category: Electronics If you like this model, please throw me a like. Designing the models is time, filament and coffee consuming. If you want to support my work buy me a coffee (PayPal). Thanks!
Simple case and plate desing that I made for PRKL30 keyboard. Plate and case goes together with m2x8 screws (6pcs). More info about the keyboard: https://github.com/ErkHal/PRKL30
Instead of expensive slot nuts you can use cheap M6 square nuts for heavy AL3030 System 6 profiles Category: 3D Printer Parts
All the parts I have modified for heavy AL3030 System 6 profiles Category: 3D Printer Parts
I wanted the microphones to be mounted on the speaker. I created a simple mount for the two included microphones. Use two M8 (1,25 thread) screws to mount the holder to the speaker. Alternatively print the screws. I didn't have a screw…
Reduction for Solomon IRON-N SL30-N for “Soldering Iron Press for Threaded Inserts” The model is a simple reduction to : https://www.printables.com/cs/model/653896-soldering-iron-press-for-threaded-inserts Solomon soldering iron had the…
Minimal E30, L30 alignment holder shelf. Made with clearance circles for rubber feet nubs to fit so there's no need to remove them. Printed with brim and no support. You will need supports if your printer can't do 21mm overhangs.
