Counting matching models…
A drop-in, hanging style wall mount for the Ryobi PCL702 cordless vac. Can be used with or without the battery installed. It is printed with 75% infill modifier block to reinforce the screw clearance holes.
Modeled and printed a fully articulating frontend loader becasue….well, becasue I could as I explained to my wife! I'll be modeling various construction equipment in HO scale for a railroad in the near future, so I thought I'd start here,…
This is a quick hanger to hang the new Ryobi 18V Cordless Hand Vacuum with Powered Brush. It sits flush against the wall when mounted and I am happy with the fit. Printed in Inland Tough PLA at 220 degrees. 3 walls and 30% infill. It can…
Prints vertically on the exhaust side without supports.
Use a couple of screws to mount this anywhere you want your vacuum at hand. You'll need a little force to pop it into place and remove it. Make sure your screws are flush! I also made a similar one for pegboard that doesn't have the…
Wanted an extension that tapered down to a narrower opening than the standard crevice tool and also wanted something I could print out of TPU to be able to have some squeeze and give to get into even tighter spaces without worry about…
Built to hold Ryobi vac attachments.
Created this to keep the accessories with the hand vacuum for convenience.
Printed in PLA without supports, 15% gyroid infill, inner and outer brim. Print face down. Designed in AutoCad.
Ryobi PCL704 adapters for one-half, five-eighths, and three-fourths inch ID silicone tubing. The necks are long enough to fit a hose clamp around, if needed.
As tactical_snacks put it: A drop-in, hanging style wall mount for the Ryobi PCL702 cordless vac. Can be used with or without the battery installed.
The lamp is quite powerful and there is a certain melting / fire hazard attached to it. This transport cover can be slid over the lamp to prevent accidental button presses during transport. A simple string can be attached to securely…
I created this to have a wide tip option for the PCL700. Make small crumb cleaning quicker by sucking up a wider path and reducing the number of passes needed. Basically the opposite function of the crevice tip. I printed with 99 wall 0…
Added mounting screw hole
Slide in mount for Zircon StudSensor
I modified the authors original mount to be used with the IKEA Skadis system. This mount is for a Ryobi PCL702 hand vacuum Parts: (3) M3 x 12mm long SHCS (3) M3 T-Nuts for Skadis by ORM - Found Here Print Settings: Material: PLA
Plain and simple, the anti roll thing on my Walther PL70r broke for some reason. Quick and simple replacement, which even is less painfull for the belt case to close, because it has parallel sides. Since the model is quite basic, i'll…
Battery adapter from Samsung SB-L110A (used on the Samsung VP-L700 camcorder) to Sony "brick" batteries like the NP-F570, F550, F970, and so on. Needs some additional parts to be assembled. Contact me if you wish to know more about it.
These are two brackets which allow the Topping Audio E70 DAC and L70 Headphone Amplifier/Pre-Amp to stack neatly, connecting them into a single unit – the EL70, if you will. They are designed to have a tight friction fit. The front piece…
This dumb insert is required to use the PCL704 / PCL704B and all aftermarket adapters attach to it, and it is not replaceable since it has been out of stock for over 6 months and no aftermarket sellers have it in stock either. Mine broke…
Its a holster, you get the idea. I've provided STEPs so that you can change it as much as you'd like. I do plan on making a picatinny mount version eventually. Play with the scale of the pieces to make sure the flashlight fits right and…
XLPower Nimbus 550 Tail Control Guide XL70T04
A short yet wide tool for the Ryobi PCL702 hand vaccum. This one fits the vaccum perfectly and does not leak like some other tools for this vaccum. I printed in transpartnet PLA and it has held up great for months of use. If printing in…
Under desk mounting brackets for Dell 7010 SFF. This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/cumM1fjUi2c 1/6/19: Added new version with 3rd screw hole 9/18/19: Added new version with more strength.…
XL7015 PCB Mount for Led Flashforge Adventurer 5M
This is a three-piece nozzle with the black cap made from TPU. The nozzle tube is printed on its side for layer strength. It has a flat side for bed adhesion. No supports needed but there will be a little sag inside the tube. You can use…
soportes de rejilla de goma (Caucho parlantes) para parlantes Technics SB - LX70, Use Flex only o TPU 95 or less
I made these for my 1976 XL70 they were missing when I got the bike. I didnt have original parts to model off of so these are a best guess from images I found online and measurements off the bike.
I didnt have an air box or intake tube so I drew this in Fusion using images for reference and rough dimensions from a replacment air filter. i dont know if the actual filter media will fit cause i dont have that either. I used foam to…
I made this to replace the flasher holder on my 76 XL70, probably will work for other years. Printed in TPU, pretty simple, Measured best I could off of the original part that was pretty damaged.
Simple protective cover for Wurkkos DL70 diving lamp with a nice tight fit. Prints in PETG without supports.
The lamp is quite powerful and there is a certain melting / fire hazard attached to it. This transport cover can be slid over the lamp to prevent accidental button presses during transport. A simple string can be attached to securely…
Tripod Mount Ring for Sony E 70-350mm F4.5-6.3 G OSS (SEL70350G)
My headphone band broke and rather than buying new headphones or wrapping the band with tape, I decided to challenge myself and replicate the band using Fusion 360. The best quality I've gotten with a 0.4mm nozzle is with: 100% infill…
This is a bin designed specifically to hold the 7.2v Makita ML704 LED flashlight for Zach Freedman's Gridfinity system. As far as I know this light is only sold in Japan, but it was relatively inexpensive for me to import one. If you are…
V3 IS LIVE! ALL FUTURE REVISIONS WILL BE PUBLISHED HERE. Amazon link for the fan I used: https://amzn.to/3GJiuCT OR if you want to buy the standalone motor*, this one is the closest I could find: https://amzn.to/4iY52bY *(May require…
This is a remix of the Universal Smartwatch Dock Vol 2 ( https://www.thingiverse.com/thing:5714915 ) by https://www.thingiverse.com/guppyk/designs This works for the Jacoosa L70 Smart Watch, which uses the small magnetic style 2 pin…
Retro-style desk fan model allows you to extend the blades and hub based on your motor's power and volume. Ensure that the blades do not touch the casing, and feel free to use glue ! :)
I wanted a replacement part for Ryobi hand vaccum incase I ever lost it so I painstakenly modeled this part up. It fits the Ryobi PCL702 vaccum and adapts it to be able to use 1-1/4" tools. It is about 1.5" longer than the original as…
A tall and long tool for the Ryobi PCL702 hand vaccum. This one fits the vaccum perfectly and does not leak like some other tools for this vaccum. I printed in transparent PLA and it has held up great for months of use. If printing in…
I wanted to put my DAC-AMP-combo in my rack so I designed this, the back piece is designed to fasten with 4x M3x12 or 16 into M3x5x8 heated inserts. The sides will then be jointed with 6x M5x12 hex screws and M5 nuts, recomended to use…
This is a mount that attaches the Eufy L70 robot vacuum dock to IKEA's POÄNG Chair. For a nice tip I can create you a custom robot vacuum dock mount for your situation.
Needed a replacement for the GL702VI‘s power plug casing. If you can’t buy - DIY
I designed this is tinkercad so there is nothing special about this design. I lost the original flap that went inside the nozzle to keep the debris from falling out when the vacuum is turned off. I printed this with pla and it works but…
Simple protective cover for Wurkkos DL70 diving lamp with a nice tight fit. Prints in PETG without supports.
Key hinge replacement for Lenovo L70. Should also be suitable for other notebooks which use the same layout. As the hinge is very small I recommend using a 0.2 nozzle. I have tried PLA and PETG, with PLA working much better. I also…
Tripod Mount Ring for Sony E 70-350mm F4.5-6.3 G OSS (SEL70350G)
