Ryobi PCL702 Hand Vacuum Extension
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Fit's the Ryobi PCL702 ONE+ 18v Wet/Dry hand vacuum. Tapers to a smaller point than the standard crevice tool.
- Rating
- 5 / 5
- Likes
- 13
- Downloads
- 126
- Makes
- 1
- Views
- 638
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial
Wanted an extension that tapered down to a narrower opening than the standard crevice tool and also wanted something I could print out of TPU to be able to have some squeeze and give to get into even tighter spaces without worry about damaging/scratching surfaces or the tool breaking.
There are two STLs attached.
The version with built-in support is designed to be printed in TPU with a corse layer height between .28 and .32 mm. Using a well tuned TPU profile, the support section should tear away cleanly with a little effort. Print it vertically with an 8-10mm brim for print stability.
Also is included is a version without built-in support is you prefer to add your own.