Counting matching models…
Read: How I Designed a 3D-Printed Laminar Flow Nozzle (2026-08-21) Versions mk1 - 2020-08-31 mk2 - 2025-06-04 mk3 - 2025-06-06 Intro Like so many late-night YouTube voyagers, I was hypnotized by those crystal-clear “glass rods” of water…
This is an attachment for a garden hose that creates a laminar flow in the water. Laminar flow is a concept in fluid dynamics that describes a flow that is uniform and parallel. Print instructions Unassociated tags: fluid dynamics…
Laminate Flooring Wall Spacer 8mm / 5mm
The Freecad file is included if you need to make any changes. Printed in PLA. 0.2mm layers, 3 walls, 15% cubic infill. I uses a dozen installing a 12 ft x 15 ft floor.
🟩 🟦 🟦 🟪 🟥 🟧 🟨 I needed to display some information at a point of sale quickly, and only really had A4 paper and a laminator available, so I designed a rough stand and used it for the display and then came back to refine it a little. This…
[EN] You can find the description in English below [ES] Escuadras de Ensamble en X y T para Melamina de 18mm Estas escuadras de ensamble en X y T son la solución perfecta para quienes trabajan con melamina de 18mm, proporcionando una…
This is a Remix from Major Hardware Deskfan, but with Laminar Flow. With this you will get a gentle Airstream, like a Dyson Fan. Happy Printing. Best to print it with 100 infill Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts:…
Spacer laminate 7mm - 12mm
The main features Configurable size and rounding/chamfering (rounding inwards) of corners. 10 main areas for text Independent parameters for each text areas, including options for better printability and positioning, and full…
This is my contribution Remix from Major Hardware Deskfan, but with Laminar Flow. Lets start the Remote Aircooler competition! This is the 120mm Noctua Desk Fan Version This version is calculated to target a 2,5m target. For this the…
Brand we used for laminating the Din A4 Papers: "Leitz 80 Micron Laminating Pouches"
MDF / Laminated Board 18mm Corner Clamp – “Third Hand” Support This is a simple and practical corner support designed for 18mm MDF and 18mm laminated boards . It works like a “third hand” – helping you keep panels aligned at 90° during…
[EN] You can find the description in English below [ES] Escuadras de Ensamble en X y T para Melamina de 16mm Estas escuadras de ensamble en X y T son la solución perfecta para quienes trabajan con melamina de 16mm, proporcionando una…
UPDATE: After using the original spacers for a while I made an update. The drywall behind the trim was high enough that the spacer would fit under the drywall and thus the laminate not be 1/4th of an inch spaced. The updated design has a…
[EN] You can find the description in English below [ES] Escuadras de Ensamble en X y T para Melamina de 15mm Estas escuadras de ensamble en X y T son la solución perfecta para quienes trabajan con melamina de 15mm, proporcionando una…
The original tray for my wife's laminator broke after the cats knocked it off the nth time in a day so I decided to design a new one. I had a lot of issues with designing the tabs that it locks into. They work currently but if I feel like…
Supports required on bottom of handles Use of this base requires removal of the black factory base plate Holes are sized for M4*12 countersunk head screws and/or the factory screws for the base plate
Filament length Less than 2.5m Filament weight Less than 6.5g You can easily test the strength of the filament with leftover filament.The model has a cutout for easy breakage, so you can feel it break at the center of the letter. 260~235℃…
Versions mk1 - 2020-08-31 mk2 - 2025-06-04 mk3 - 2025-06-06 Note Since releasing mk3, I have subsequently released a follow up mk2.2 version that may be more accessible to some Smaller footprints and no screws are needed Similar beautiful…
A low-profile laminar fan duct for PC cooling. Now, I'm still trying to learn OpenFOAM, so there's still tuning to do on the blade angle and shape to improve things, but this works. I just think I can make it better. In the meantime, have…
Our tub faucet, while quite expensive, was designed terribly. I decided to make an adapter to fix it and while I was at it made a number of modular spouts that provide different options for how the water comes out. The model comes with a…
Trabajo en progreso esto es por un pedido, un esquinero para madera de 15/18mm, y con agujeros de 7.5mm 15.2 o 18.2 mm opcion 1 75mm x 50 mm opcion 2 100x100 el desfase interno es de .1, con lo cual el ancho para colocar la madera es de…
This model is for printing the flow correction cover for a laminar flow hood. A laminar flow hood (LFH) is used by microbiologists and mushroom growers to blow filtered air onto their media (agar plates, grain spawns, etc.) and prevent…
remixed fan duct by Segelkram to include a 40mm diameter bezier cone in the center (the size of a typical fan center hub) which should reduce turbulence and improve laminar flow. recommend printing with supports enabled. The cone base…
Print with supports as the bottom of the laminar flow has a gap. I have printed many of these and they work great.
Versions mk1 - 2020-08-31 mk2 - 2025-06-04 mk3 - 2025-06-06 As seen on Prusa Live #26! First iteration, a bit leaky, the output from the nozzle is not as uniform as it could be. Might explore the idea of using an aluminum sheet at the…
This combination of garden hose connector from @matej and bottle cap from @3DAcademy can serve many purposes for example: pressure reductor - with a large hole in the bottle you can water your plants without any pressure from the hose and…
You have probably seen this technology in fountains, where the water arcs perfectly as a smooth column. Now you can play with the same laminar flow of water with this nozzle! Insert a standard washer and screw this nozzle on a standard ¾…
A spacer for laminate floor installation. Intended for 8mm thick laminate flooring with 8mm gap between the wall and the floor. The small tab on one end helps to remove the spacer once the floor has been installed. You can easily print…
I needed spacers to accommodate 4mm rigid vinyl plank flooring, but with enough height to catch drywall with a 1/2in gap
Summary LET joints use the bending of individual torsion bars to gain bending and translational motion from previously solid sheets of material. This makes it so we can gain large deflections from materials that do not generally bend,…
(esquinero para melamina) con sujetacion de 4 tornillos
Its about 1 liter at the current scale. Produces a fairly laminar flow out of the spout.
This laminator is based on Makers Mashup model, but made from scratch see: https://www.youtube.com/watch?v=UfSaZ_dAfy4 I use it to laminate stickers, but can be used to laminate signs or so. The model uses 4 pcs 6203 2RS bearings, and 1pc…
A spacer designed for parquet and laminate flooring, which will hold a 6mm gap between the flooring board and the wall. For a tighter fit between the boards you can simply tap the spacer slightly with a hammer and use it to push the…
I designed this to organize my paper for my new vinyl cutter I got. I uploaded the .step's for easy modification and measurement. You can just adjust the length of the shelf level as you need, its basically a simple extrusion, so it will…
Connects to 1" PVC I have another print that adapts the standard return nozzle to 1" PVC I originally used this without the 45 deg angle and had a small amount of water splashing back out of the pool. If you fill the last part of PVC pipe…
Pomůcka slouží k usnadnění skládání šňůrek z rovného pruhu látku šíře 35mm s využitím staré laminovačky. Celý proces překládání a zažehlení vyžaduje 2 pomůcky (2 průchody pruhu látky), jedna přehýbá okraje ke středu látkového pruhu, druhá…
I created a floor mat for my office chair out of laminate wood flooring to protect the carpet, and needed a way to protect the exposed edges of the laminate. This particular guard is design to fit into click-together flooring with a…
Support de menu plastifié / laminated menu holder
This is a Laminar Flow Nozzle design I came up with in 2020. It's the MkIII because it was the third one I designed. The other two haven't been released anywhere. It's relatively small for a Laminar nozzle, and doesn't behave perfectly,…
This design should improve extruder cooling by a few degrees, my goal was to make airflow better so I could decrease the extruder fan RPM to make it quieter. I don't have any accurate way of measuring airflow, so instead I inserted a…
Version of the RC3 face shield to be made with A4 laminator sheet. Only needs 1 laminator sheet for entire face shield. DXF included for upper and lower visor template Band adjusted to 17mm high. This results in the part being the same…
Twitter announcement about effectiveness . Github page Walkthrough on YouTube Interested in purchasing a fully assembled device, or just the 3D-printed parts? Checkout Shopify
Cheap alternative to a real flowhood. Creates a somewhat steril envoirment using laminar air flow using a cheap air filter from IKEA. Works great to avoid contamination when cloning mushrooms. Simple print with PLA. I used supports but…
This adapter allows the water to flow without turbulence to avoid spilling on rebound
120mmx35mm case fan spacer with insert to remove turbulence.
Lâminas para roçadora de pasto chinesa / marca branca a bateria A máquina trazia algumas laminas em plastico para cortar pasto suave como relva por exemplo, então desenhei o modelo, caso precise de mais laminas é só imprimir. Aconselho…
Intended for 8mm thick laminate flooring with 6mm gap between the wall and the floor.
A practical workshop tool designed to make furniture assembly easier and more accurate. This 3D-printed corner jig is designed for 18 mm laminated chipboard and helps position and hold panels at a precise right angle during cabinet…
First version was to small and didn't hold onto the laminate. Updated the version to hold onto the laminated picture and stay upright.
T-Shaped laminate floor space for expansion gap. I printed 30 of these and used two per board length and 1 per edge. You may need more, if you do just print more. My flooring was 8mm thick with 3mm underlayment. I set this up for 11mm so…
This Prusa I3 implementation was build using only laminated acrylic as an alternative to 3D printed parts. You can download the entire model at GrabCad.com https://grabcad.com/library/laminated-prusa-i3-printer-1 But if you're looking…
Use these spacers as a was to get your 3/8in expansion joints on all perimeters of your flooring.
When I build prototypes using FDM, I sometimes experience delamination and breakage of my 3D-printed parts. It is not always possible to rotate the part to optimize strength, which can lead to adhesion and delamination issues. I have…
A simple print that forms an "X" when setup, and can be used as a paper holder (both input and output) for a laminator ( Swingline 1701857 ). Other laminators will probably work, but you may want to adjust the height to match. Without…
Excellent Laminar flow hood instructions are available online, however, the filter mounting failed when using only silicone caulking. I made these brackets to brace and mount the HEPA filter against the container. ¼" holes with plastic…
This is a remix of the following: https://www.thingiverse.com/thing:1510144 IKEA Stuva enclosure porthole pass-through (with swivel filament guide) by buddyO I had already built my enclosure for Anet A8 out of laminated particle board. I…
Print without supports standing. 0.4mm nozzle, 0.2mm layer height; 3 perimeters, 10-15% infill. Printed with PLA without issues. The lid fits a little on the tight end, it helps wiggling it on by tilting towards the blades. Snug and…
A flexible socket for the Open Bionics MyoPod wireless EMG sensor, allowing for adaption and integration into prosthetic sockets or other wearable structures. This model is based on the same geometry we use for our own Hero Flex activity…
This mod uses 6.4 mm laminated glass panels on the sides and top with 5mm toughened glass on the door. The door uses a Clicky-Clack door which has been adjusted for the panels and rubber. Advantages Noise reduction Heat insulation Ease of…
I was missing something that could hold my laminated photos and this was my solution
I think the frame in self-expandatory. The spacer is to fill the gap between the glass-lens and the ribbon cable.
suporte de laminas para tiko tiko com furaçao para afiquecar.
A laminator with a busted drive gear for the lower drum is fixed with the help of 3d printing. Another piece saved from being scrapped! FreeCAD source file included for further customization. PETG 0.2 layer height, 25% infill, 5…
Made these spacers to finish a flooring job. Tired of the wood shims moving around!!! 1/8"- 3/16"- 1/4"- 5/16"- 7/16" sizes
I needed some 10 mm spacers when fitting a laminate floor so I designed these, I printed them in PETG but PLA should be ok
Print in .2 layers 10-15% lines infill. Any filament works but PLA is cheapest. This is my final revision. This version you will slide the Q10 display under the protruding tabs. These tabs hold down the display, and ensure even LOCA…
THIS IS A WORK IN PROGRESS ! Redesign of https://www.thingiverse.com/thing:4667511 Should be easily printable with a 0.4 nozzle Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.125 Infill: 50…
Saw Gauge for parador skirting, to cut straight and in different angles. Printed in PETG 40% infill.
Long ago we laminated our resource cards, and they've survived the years in pristine condition. This is a remix that uses the same overall dimensions and design style as the original , but opens up some interior space for laminated…
This is my first upload. Wanted to make something showcasing pattern build plates. The laminated panels are held on by CA glue.
English 🔹 Bracket for a Laminated Board (18 mm, 200 mm) This bracket is designed to mount a laminated board with a thickness of 18 mm and a depth of 200 mm to a wall. It’s perfect for creating a stable shelf or workspace. Installation is…
A lamination ring for use with the Falcon USMC-compatible Quick Release Wrist, with cap for protecting internals during socket fabrication. Can be used for definitive socket or check socket fabrication. Features: To suit a 50mm ID opening…
Laminar flow improves blowing. It is recommended to print with ABS, I made with white PC/ABS compound. No supports needed. Used 0.2 mm layer height vith variable height at holes (~0.12). With infill combination it takes about 16-18…
Remix di un ventilatore a flusso laminare da scrivania con base x alimentatore da guida din da 1 modulo e interruttore a pannello 18.5*12.5 mm
A tapping block is a specialized block used when installing laminate flooring. It is placed against the plank and struck
I've designed a cold laminator using two aluminum rods. Each rod houses two press-fitted ball bearings through which a threaded rod passes. The rods are held together by two springs mounted on the threaded rods, providing consistent…
Replacement gearset for the Office DEPOT HD95 laminator. You'll need to print 2 of the roller gears to have a complete set. Remember that it's HOT where these things live, so use an appropriate material; I used PA-6 Nylon. (6 Walls, 30%…
Replacement wheel for Chinese plasticizer laminator ABOX Category: Office
The model I'm uploading does not have the custom branding and imagery, but is a good platform for a few words and symbols of you want to customize it. The holder itself is light, so just be mindful that you may have to resize the model up…
I made this to test some delamination issues I was having. Print it with no infill. It prints quick and uses very little filament.
Wer kennt es nicht, der Bodenbelag hat nach einiger Zeit gelöst, oder bei nicht fachmännischem Verlegen gibt es einige lose Platten, die hier und da etwas verrutscht sind oder nicht mehr so fest sitzen. Da ist diese einfache, aber dennoch…
Holder for attaching a laminate board 18mm x 200mm it can be both on the stand and on the shelf
Ends for floor profiles, profiles from OBI - 40x14 mm Use mirroring tool for L/P shape. There is also uploaded tool for holding the profile during the cutting edges. Koncovka na podlahové lišty z OBI, profil 40*14mm. Category: Household
I got really annoyed of the tiny spatulas that were sold in shops and came with our Silhouette Vinyl cutter. Made two full sheet size ones that cover the entire sheet in one swoop. This has drastically improved my success rate! Couple…
Real life problem. My hobby is scubadiving with dry suit from Scubapro. My inflator button fell off and I did find any replacement parts. Has an enhanced structure, compared to original. For best print quality place vertical, print solid…
I wanted a watering can rose(nozzle) replacement that didn't suck. The one I previously designed, the water would come out of the holes in a turbulent fashion and all converge and it would impact the soil in a disruptive stream. With this…
Print in .2 layers 10-15% lines infill. Any filament works but PLA is cheapest. This is my final revision. Pictured is MGBC jig, DMGC is the same method. This version you will slide the Q10 display under the protruding tabs. These tabs…
Cosmic Hourglass Laminated Bookmark
Print in .2 layers 10-15% lines infill. Any filament works but PLA is cheapest. This is my final revision. Pictured is MGBC jig, MGLC is the same method. This version you will slide the Q10 display under the protruding tabs. These tabs…
A simple 3 part laminate clip. I needed something to hang forms on my 3D printers. After printing the parts labelled hook and pin are used to sandwich a laminate between them. I used epoxy to attach the Mount to my printer door as I…
This is a device that will hold binding strips together tightly using a spring, while you apply acetone to fuse them together. To assemble, you will need an M4 screw and a nut, and a spring to fit inside. More details in this video:
This is a simple tool holder for the included tools for an EnduraLam3 cold laminator. I got tired of moving the useless plastic bag of tools around. The holder mounts to the front of the machine using VHB double-sided tape or similar.…
A shelf bracket made of 16mm laminated chipboard. The shelf is 200mm wide and can support up to 1m of load without visible deformation. If the wall is uneven, use spacers at the bottom of the bracket. The bracket also includes decorative…
This is a snug not quite friction fit model that goes over the output shaft. The shaft is made from clear acrylic which is strong until it snaps, with that in mind this is snug but not ultra tight, i will be using a 2 part glue to join it…
Created for a friend who displays his car at classic car events. The TPU hook is sized for his window glass thickness of 4.65mm but it's not too critical. If yours is similar, then this model should do the trick. If you need a very…
Simple but nice looking watering can for plants with laminar flow. Best way to watertight this model is to print a bit hotter and with high amount of perimeter.
