P
PrintablesPrintChallenge
The traveller (sculpture inspired by artist Bruno Catalano)
for building instructions please see https://youtu.be/8ReAR9MRtXU, although this one pretty much explains itself…
- Downloads
- 888
- Likes
- 248
- Rating
- 5
Search results: lano
Counting matching models…
P
Printablesreturn403
Mellanox ConnectX-4 Fan Bracket
This bracket allows you to mount a 40mm fan on the heat sink of the Mellanox ConnectX-4 (heat sink size 45x45x11mm). It is designed with the Noctua NF-A4x10 FLX fan in mind, but other 40mm fans might work. The bracket uses the four stock…
- Downloads
- 535
- Likes
- 30
- Rating
- 5
P
Printableskennyd1gital
Plano Field Box/Ammo Can Divider — Model 1312
A divider frame/insert for Plano's Model 1312 Field Box/Ammo Can with up to three dividers to split the can in half, thirds, or quarters. Great for hauling multiple calibers to the range in one convenient container! Note: The design has…
- Downloads
- 390
- Likes
- 77
- Rating
- 5
P
PrintablesPau
Silbato de bolsillo plano y redondo
Flat and round pocket whistle / Silbato de bolsillo plano y redondo
- Downloads
- 332
- Likes
- 15
- Rating
- 0
P
PrintablesBadMouth
Fast Print Simplified Plano 3700 Series Small Parts Organizer Bins
THERE IS NO CAD FILE. I hacked these together in TinkerCAD. Plano 3700 series are cheap and readily available. The 3-28 model is usually less than $6 at Walmart. See my original remix for more information about the Plano 3700 series…
- Downloads
- 321
- Likes
- 73
- Rating
- 5
P
PrintablesCitruspers
Mellanox ConnectX-3 40mm fan bracket
A simple fan bracket to hold a 40mm fan in place against the heatsink of a Mellanox Connectx-3. Untested at the moment, but people were asking for it. Uses M3x12 (ideally SHCS) or longer (the screws should go past the heatsink anyway,…
- Downloads
- 316
- Likes
- 18
- Rating
- 5
P
PrintablesBrandon
Plano Organizer Bins
These are bins that I designed for the Plano 3700 series organizers, although they may fit other organizers. They are for small parts, such as small screws, nuts and bolts. You can remove the bin and tip out what you need and then replace…
- Downloads
- 255
- Likes
- 53
- Rating
- 4.5
P
PrintablesCitruspers
Mellanox ConnectX-2 40mm fan bracket
A simple fan bracket to hold a 40mm fan in place against the heatsink of a Mellanox Connectx-2. Uses M3x12 SHCS or M3x16 SHCS. Keep in mind that you're (most likely) printing this in thermoplastic. If you pick a filament with a low HDT…
- Downloads
- 247
- Likes
- 25
- Rating
- 4
P
PrintablesSvět energie.cz
Kaplanova turbína
Kaplanovy turbíny se využívají ve vodních elektrárnách s menšími až středními spády a relativně větším průtokem. Díky natáčivým lopatkám rozváděcího i oběžného kola ale dokáže pracovat se stejnou účinností i při sníženém nebo proměnlivém…
- Downloads
- 237
- Likes
- 21
- Rating
- 0
P
PrintablesPCPartPicker
Plano 2-3700 Rail Mounts
These rails match up with Plano 2-3700 stowaway containers. The boxes slide in, and hold in place with the ridges matching up with the indentions on the container. I print them on their sides (with the bevel facing upwards) in PETG,…
- Downloads
- 218
- Likes
- 81
- Rating
- 0
P
PrintablesBadMouth
Plano 3700 Series Small Parts Organizer Bins
THERE IS NO CAD FILE. I hacked these together in TinkerCAD. I've been searching for a cheap small parts organization system that was the best fit for the size and quantity of parts that I want to store. The best fit for me turned out to…
- Downloads
- 217
- Likes
- 43
- Rating
- 0
P
PrintablesKubino4
Milano Cortina 2026 Official Medal
The official medal of the 2026 Winter Olympic Games in Milano Cortina embodies the spirit of unity, determination, and resilience. Its unique design combines two distinct halves — one smooth and polished, the other textured and granular —…
- Downloads
- 209
- Likes
- 17
- Rating
- 0
P
PrintablesPlexi
Plano 3700 Parts Organizer Divider
I ran out of dividers for my Plano parts organizer (also for tackle) and designed this divider. Its printed in PLA and fits tightly in the slots of the organizer. It fits the Plano 3700 line of boxes. I use my Plano 3700 boxes to store…
- Downloads
- 184
- Likes
- 8
- Rating
- 5
P
Printablesrmblr
Lenovo M720q baffle for Melanox CX312A and Melanox CX322A 10GbE SFP+ NIC
This is a remix of the bollio's original model on thingiverse . I have added some cutouts to improve airflow. The original auther stated that this baffle was for the Mellanox ConnectX-3 CX312A. But I have a CX322A, and it works just fine.…
- Downloads
- 182
- Likes
- 26
- Rating
- 5
P
PrintablesBriggs
Plano Bow/Gun Case Replacement Latch
I think this also may fit some of Plano's rifles cases, but did not have another case to try. Printed in SunLu PLA elite series, black. Infill: 20% Walls: 2 Layer Height: 0.2mm Supports are needed for notched ends on both sides of latch.…
- Downloads
- 177
- Likes
- 3
- Rating
- 0
P
PrintablesYelloY
Solano glasses temple
Originally printed in PETG. PLA may be too fragile around the hinge. A bit of sanding was needed to smooth out the print as it has permanent contact with ears and skin.
- Downloads
- 175
- Likes
- 19
- Rating
- 0
P
PrintablesRadar_Detector
Lenovo M920q/M720q Mellanox MCX311A (Remixed)
I wanted to install a 40mm fan on my M920q to help cool the SFP+ Mellanox card I had laying around. So I modified the ITGear Top vented case design they uploaded to Printables. V1 Is as per my photo. V2 is slight adjusted and should have…
- Downloads
- 162
- Likes
- 9
- Rating
- 0
P
Printablesb00pcmdr
Mellanox ConnectX-5 40mm Fan Bracket
Remixed Citrusper's design for the larger heat sink of the MCX512A-ACAT. Recommend printing in high temp material. Design works great for me, but this was my first design in Fusion 360 so .f3d file is a mess. Thank you, Citruspers! ASIC…
- Downloads
- 160
- Likes
- 11
- Rating
- 0
P
PrintablesStormCrow 13
Llanowar Elves
Magic's classic elvish mana dork. Since the original art only shows the head I decided to just put it on the same body. Also I decided to make a version using a bow because that just seems like a model that would be useful to have and I…
- Downloads
- 151
- Likes
- 41
- Rating
- 5
P
PrintablesExtra Fox
Plano Model 3701 Small Parts Bins
The Plano model 3701 storage unit is a handy size case for all sorts of smaller parts. But even with the dividers it has, it isn't very efficient when it comes to really small parts. So I designed up some bins to fit inside the organizer…
- Downloads
- 141
- Likes
- 38
- Rating
- 4
P
PrintablesBriggs
Arrow Holder (Plano Case)
(6) arrow holder replacement part for Plano hard bow cases. Printed in SunLu Black TPU 70% infill - To keep some rigidity, but still have flexibility. No supports
- Downloads
- 137
- Likes
- 13
- Rating
- 0
P
Printablesaschmitz
Mellanox ConnectX-2 Half-Height Bracket
This is a simple bracket that can be printed as a half-height bracket for single-port Mellanox ConnectX-2 PCI cards. This is a remix of rasarmg's “PCI Bracket Generator” on Thingiverse , and is only a very small addition to it. If you…
- Downloads
- 132
- Likes
- 9
- Rating
- 5
P
PrintablesLCSteve
Plano 3650 Bin Organizers
Every time I needed some small screws, JST connectors or any other little fiddly thing for my printers they came in those mini plastic bins with dividers. They never work super well at keeping things where they should be as well as just…
- Downloads
- 131
- Likes
- 25
- Rating
- 0
P
PrintablesKikeMaker
Soporte plano para litofanía lineal.
Luego de imprimir se puede colocar en la parte posterior una iluminación tipo led. La litofania de tamaño 10 x 10 se coloca con pegamento en la parte frontal. No requiere soportes.
- Downloads
- 127
- Likes
- 17
- Rating
- 0
P
PrintablesSteveMYoung
Plano Edge Terminal Box Collection
This is my Terminal Box collection compatible with the very popular Plano Edge series of boxes. Designed from the ground up to complement their boxes, and offer sizes not otherwise available. I've provided models for every option between…
- Downloads
- 126
- Likes
- 25
- Rating
- 0
P
PrintablesConnor Sigman
2026 Milano Cortina Olympic Pictogram Medallions
This is a complete collection of 2026 Milano Cortina Olympics pictograms on circular medallions. The dimensions of each medallion is 55mm x 55mm. For a more detailed view of the pictograms featured visit the following link: 2026 Milano…
- Downloads
- 122
- Likes
- 7
- Rating
- 0
P
PrintablesDavid2376
Plano Prolatch Stowaway 3600 Divider Bins For Small Parts
I have been looking for a small compact organizer that I could grab and take with me on the go. Some of my goals and ultimatly features of this design: - To be able to use a pre-made and inexpensive organizer (there are some great…
- Downloads
- 119
- Likes
- 17
- Rating
- 5
P
Printablesdoggle2
Mellanox ConnectX-3 Low Profile Bracket
A quick print to make a low profile bracket for the inexpensive Mellanox Connect-X 10 gigabit Ethernet NICs.
- Downloads
- 113
- Likes
- 9
- Rating
- 0
P
PrintablesJesse Schauer
Plano 3700 Divider
Zen1's Plano 3500 dividers are simple and they look great. I printed one out before i realized that they were far too small for the box I have (Plano 3700). I took the existing design and stretched it out to fit the space in this box (2"…
- Downloads
- 111
- Likes
- 16
- Rating
- 0
P
PrintablesTimothy Chak
Dell Mellanox ConnectX-4 CX4121C Bracket for ThinkCentre M720q, M920q, M920x
Please note - this bracket was designed specifically for the DELL version of the Mellanox ConnectX-4 NIC. Fits perfectly in the ThinkCentre M720q/920q/x, which is a common node in many home labs.
- Downloads
- 110
- Likes
- 7
- Rating
- 0
P
PrintablesExtra Fox
Plano Micro Divider Bins
I had previously created some divider bins for the Plano 3701 storage case, but I eventually came to dislike the layered approach to storage. I really wanted to see everything in the bins at a glance while still increasing storage…
- Downloads
- 109
- Likes
- 35
- Rating
- 0
P
Printablessimonsmd
Lenovo ThinkCentre M720q bracket for Dell Mellanox ConnectX-3 CX322A
Print with outward facing/flat side down. Includes three holes for M3 threaded inserts to secure the bracket to the NIC and the case of the M720q. But it should also hold reasonably well without threaded inserts by securing the bracket…
- Downloads
- 108
- Likes
- 9
- Rating
- 5
P
Printablesechomirage
Tap and Die Tray in Plano 3650 for Pittsburgh 60pc Set from Harbor Freight
I made this set of organizer trays for a 60pc Pittsburgh Tap and Die set from Harbor Freight, whose shitty blown plastic case takes up entirely too much real estate in a drawer. This makes the entire set a tight fit into the old-style…
- Downloads
- 108
- Likes
- 22
- Rating
- 0
P
PrintablesKazdo
Lenovo M720q bracket for Mellanox CX312A CX312C CX322A
m720q or m920x to hold a Mellanox ConnectX-3 CX312A / CX312C / CX322A
- Downloads
- 107
- Likes
- 7
- Rating
- 4
P
PrintablesFatato
Screw Top Container for Plano Box
I wanted a small container that would fit neatly in a Plano Box to store small items. That way I can transfer them to other boxes or my PFD pocket more easily.
- Downloads
- 104
- Likes
- 14
- Rating
- 5
P
Printablesmotocoder
Plano 3600 and 3700 Container Trays
I like to use the Plano 3600 and 3700 containers to store small parts like screws and electronic components. The dividers in these tend to come out, causing the components to mix together. So I created these trays that drop into the Plano…
- Downloads
- 104
- Likes
- 21
- Rating
- 0
P
PrintablesDylanmo
Plano Edge 3500 Small Fishing Hook Retainer
Having developed an interest in ultralight fishing I wanted smaller scale storage options for the variety of techniques I've been experimenting with. Updated 10/3/2023 - Added missing radii at bottom because the previous version did not…
- Downloads
- 101
- Likes
- 24
- Rating
- 5
P
Printablesctheroux
Arduino UNO / Duemilanove / Diecimila / Leonardo / NG / Extreme Drilling And Mounting Plates
This thing is obsolete. It is replaced by https://www.prusaprinters.org/prints/43002-classic-arduino-mouning-plate . This thing contains a mounting plate and a drilling guide for the “Arduino UNO / Duemilanove / Diecimila / Leonardo / NG…
- Downloads
- 98
- Likes
- 4
- Rating
- 1
P
Printablesninjaboynaru
9mm Ammo Tray for Small Plano Field Box
Details This is a 9mm ammo tray made for the Plano Field Ammo Box - Small It holds 80 rounds. Ammo Box Link You can fit and stack 8 of these in the box resulting in a total storage capacity of 640 rounds per box. Files STL file for 3D…
- Downloads
- 96
- Likes
- 15
- Rating
- 0
P
PrintablesRaker Prints
ADHDv3 Plano 3600 Divider
Does not fit other 3600 series boxes like the 3650 and 3670. Print: .20mm layers, two layers top and bottom and 15% gyroid infill works best for me. PLA is more than adequate, and PETG gets you warped dividers.
- Downloads
- 95
- Likes
- 10
- Rating
- 0
P
Printablesmi.strz
90 degree elbow 3/4 inch. Kolano 90 stopni 3/4 cala
90 degree elbow for 3/4 inch garden hose. Kolano 90 stopni na wąż ogrodowy 3/4 cala.
- Downloads
- 94
- Likes
- 10
- Rating
- 0
P
PrintablesRaker Prints
ADHDv3 Plano 3500 Divider
Does not fit other 3500 series boxes like the 3550 and 3570. Print: .20mm layers, two layers top and bottom and 15% gyroid infill works best for me. PLA is more than adequate, and PETG gets you warped dividers. Thanks to hobobandy for the…
- Downloads
- 91
- Likes
- 14
- Rating
- 5
P
PrintablesWholesome otter
Mellanox Connectx 4 LX Shroud
This model allows to push the air through the heatsink, it's then expelled at the back of the card, cooling the sfp cages in the process. They're barely warm to the touch with this mod.
- Downloads
- 91
- Likes
- 18
- Rating
- 5
P
PrintablesKikeMaker
Soporte plano para litofanía semicircular.
Luego de imprimir se puede colocar en la parte posterior una iluminación tipo led. La litofania de tamaño 10 x 10 se coloca con pegamento en la parte frontal. No requiere soportes.
- Downloads
- 91
- Likes
- 9
- Rating
- 5
P
Printablesdgardner
Hex Screwdriver Bit Plano Organizer
Had a billion little screwdriver bits to organize so I made an insert for a Plano 3750 toolbox for them. I used OpenSCAD for the design which is included. Can be tweaked to fit other tackle or tote storage boxes.
- Downloads
- 90
- Likes
- 26
- Rating
- 0
P
Printablesdwp
Vase Mode Bins for Plano 3700
Trying to organize all my Lego pieces, and wanted a simple vase solution. I have made them in 4 different sizes which cover nearly all my use-cases. It helps to set extrusion widths to all .8 as shown below:
- Downloads
- 89
- Likes
- 12
- Rating
- 5
P
PrintablesNinomalbinho
The Farmer Sculpture (Bruno Catalano Art Inspired)
A new 3D figurine generated by AI, The Farmer, a tribute to Bruno Catalano's art, like The Travelers. Another sculpture Bruno Catalano inspired : The Surfer Do not forget to LIKE, to download and to upload your makes, thanks ! Powered by…
- Downloads
- 88
- Likes
- 15
- Rating
- 5
P
Printablesmartona
Mellanox ConnectX CX-4 / CX-6 Active Cooler
This is going to be a very niche model. I will be stoked to get one download. On the other hand, it would have saved me at least a dozen hours if I didn't have to make this from scratch, so… enjoy. I'm using this on both CX4 and CX6…
- Downloads
- 88
- Likes
- 5
- Rating
- 0
P
Printableschunt35
Plano 3500 Tacklebox storage dividers
These inserts are slightly taller than the walls of the box. I use these for very small tackle so this helps prevent anything from flying all around the box. The octo insert is for the shorter spot in the middle of the box.
- Downloads
- 87
- Likes
- 16
- Rating
- 0
P
PrintablesMartin Jörg
Franklin Delano Roosevelt
Diese Figur ist ca im Massstab 1:35 und ideal für Resin Druck
- Downloads
- 87
- Likes
- 11
- Rating
- 0
P
PrintablesJ Peset
Flat headphones holder // Soporte plano auricurales
Soporte con forma de gancho para cascos de audio. Se adhiere a la superficie con cinta de doble cara.
- Downloads
- 85
- Likes
- 3
- Rating
- 0
P
PrintablesDavid Fish
Mellanox ConnectX-2 CX312A Full Length PCIe Bracket Shield
Prints face down, then whilst still warm bend the end to make the “L” shape for a standard bracket. There is a relief in the model that helps with bending to the correct shape.
- Downloads
- 84
- Likes
- 5
- Rating
- 5
P
Printablessheldor
Thinkcentre Tiny Rear Panel for Mellanox Connectx-3 Dual Infiniband
Rear panel for the Mellanox Connectx-3 Dual QSFP+ infiniband network card (Model Number CX354A). For the thinkcentre tiny family of micro pcs. Has been tested on an m720q, m920q and Thinkstation P40.
- Downloads
- 84
- Likes
- 6
- Rating
- 0
P
Printablesdi3go
Milano Cortina 2026 Olympic Games
Model of a stand and Olympic rings. The rings can be stacked inside each other. The bottom one must be cut and the others threaded onto it.
- Downloads
- 83
- Likes
- 3
- Rating
- 0
P
PrintablesGhennadi
Plano Tackle box clip
print 100% infill with support position - on the edge. tested PETG
- Downloads
- 79
- Likes
- 18
- Rating
- 5
P
PrintablesHobby_Zone
Plano storage box dividers
I ran out of Plano storage box dividers today. After a couple iterations, I printed a nice alternative to 371081-14. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 200 Infill: 38 Filament:…
- Downloads
- 76
- Likes
- 7
- Rating
- 0
P
PrintablesCreative-Extension11
Plano 3700 Bins Fleetfarm Edition (1/2x, 1x, 2, 3x, & 4x)
Printed with .4mm nozzle, abs.
- Downloads
- 74
- Likes
- 14
- Rating
- 0
P
Printablesantonio2709
Alyssa Milano - Figura Coleccionable
Presento este detallado modelo 3D de la icónica actriz Alyssa Milano, conocida internacionalmente por sus memorables papeles en series como Embrujadas (Charmed). Esta figura ha sido cuidadosamente diseñada y esculpida para capturar sus…
- Downloads
- 73
- Likes
- 7
- Rating
- 0
P
Printablesfivesixzero
Spacers for Plano 3500-series Tackleboxes
The Plano 3500-series tackleboxes make for pretty solid parts storage. They're solidly injection-molded with clips that are a huge upgrade from those cheap “kit boxes” that come with the typical maker “assortment" packs. There are plenty…
- Downloads
- 73
- Likes
- 13
- Rating
- 5
P
PrintablesRyan
Plano Bow Case Latch
The upper half of the latch on my Plano bow case has broke twice now. Instead of waiting on a replacement I figured making a printable replacement would be quicker and allow for easy replacement in the future. Category: Other
- Downloads
- 70
- Likes
- 3
- Rating
- 5
P
Printablestimmgleason
Plano 3700 StowAway Box Divider
Plano storage boxes are great for packing away all your little bits and pieces. But they sadly do not come with enough dividers. Here is a press fit design that only takes a short time to print and will fit the Plano 3700 StowAway storage…
- Downloads
- 68
- Likes
- 8
- Rating
- 5
P
Printables3D LEE
Altiplano Cart replacement
A remix of https://www.thingiverse.com/thing:2150276 for the game Altiplano. The size is close to the cart cube so it doesn't take up much space on the board. Category: Games
- Downloads
- 67
- Likes
- 8
- Rating
- 0
P
PrintablesFalling Entropy
Plano Convex 50 mm Diameter 300 mm Focal Length Lens for SLA Printer or Finer Resolution
An attempt at making telescope quality optical lenses with a SLA 3D printer! As can be seen in the photos, the resolution was just not good enough. Additionally, there is likely waviness throughout the thickness. Crystal Clear resin was…
- Downloads
- 64
- Likes
- 7
- Rating
- 0
P
PrintablesGeneral116
Daewoo Lanos -Sun visor clip
Sun visor clip replacement Daewoo Lanos car, may be compatible with other cars too - print with PETG preferred
- Downloads
- 63
- Likes
- 5
- Rating
- 0
P
PrintablesDuck
Mellanox ConnectX-2 Full height bracket
Full height bracket for Mellanox ConnectX-2 with SCAD file for modification. Remixed from https://www.thingiverse.com/thing:3164278 I increased the thickness and added some extra ridges and lips to make the bracket much sturdier. I also…
- Downloads
- 62
- Likes
- 2
- Rating
- 0
P
PrintablesLexbell
Mellanox Connectx-3 low profile slot cover
A low profile slot cover for the Mellanox Connectx-3 CX312B. Activity LEDs are visible. Print parameters: Bambulab P1P Extrudr XPETG Matt Black Layer-Height: 0.12mm Infill: 100% Wall-Loops: 6 With support Assembly: 2x M3x6mm screws 2x M3…
- Downloads
- 61
- Likes
- 3
- Rating
- 0
P
Printables3D LEE
Altiplano board game coins
Created coins for the game Altiplano. Print and glue the two sides together. It has a nice heft to it and can stack. Category: Games
- Downloads
- 61
- Likes
- 9
- Rating
- 5
P
PrintablesRifat
Lenovo P330 Dell Mellanox ConnectX-3 SFP+ Dual Port
Dell Mellanox ConnectX-3 10Gb SFP+ Dual Port CX322A low profile bracket for Lenovo ThinkStation P330 TINY Desktop PC. I printed quite a few available models and was having different problems with them. So, I ended up just creating one…
- Downloads
- 60
- Likes
- 4
- Rating
- 5
P
PrintablesFundación ONCE
Salvaorejas "No estáis solos" en castellano, catalán, gallego y euskera
Salvaorejas con el texto "NO ESTAIS SOLOS" que es la frase elegida por la Fundación ONCE para su colaboración en todo lo referente a la pandemia de la covid19. Disponible en las 4 lenguas oficiales en España. Print instructions Está…
- Downloads
- 60
- Likes
- 6
- Rating
- 0
P
PrintablesCopper Chadwick
Plano StowAway 3400 Ammo Insert – 200 Round .22 LR Ammunition Storage Rack
Plano® 3400 StowAway Ammo Rack Insert – .22 Long Rifle (200 Rounds) This precision-designed insert transforms your Plano 3400 Series sealed container into a secure, organized storage solution for .22 Long Rifle ammunition . Designed to…
- Downloads
- 58
- Likes
- 2
- Rating
- 0
P
Printablesmurphydz
Plano Gun Guard replacement case latch
This is a remix of another Plano case latch. I just made this one a little shorter to fit my Gun Guard case. It may fit other Plano cases as well.
- Downloads
- 57
- Likes
- 1
- Rating
- 0
P
PrintablesTacos
Mellanox ConnectX-2 40mm fan bracket - Alternate version
Citruspers made a good design however I wasn't totally happy with the result. As you can see in his picture, the bracket overhangs from the heatsink and the two claws on the right are in, what I call, a danger zone: SMD components are…
- Downloads
- 57
- Likes
- 5
- Rating
- 5
P
PrintablesJulien Mairy
Franklin Delano Roosevelt — Bust
Franklin Delano Roosevelt — Buste 🇫🇷 Description (FR) Ce buste représente Franklin Delano Roosevelt , 32e président des États-Unis et figure emblématique du XXe siècle. Seul président américain à avoir été élu quatre fois, Roosevelt a…
- Downloads
- 55
- Likes
- 5
- Rating
- 5
P
Printablesdgardner
Mini CNC Plano Bit Toolbox
Needed to organize the tools for my mini CNC. Mainly 1/8" bits and ER11 collets. Had a Plano 3750 tackle box laying around so I created multi-layered inserts for it. I use OpenSCAD to design these and am including those designs here. With…
- Downloads
- 54
- Likes
- 13
- Rating
- 0
P
PrintablesBitmag
Plano 777 fishing box clamp
Spare clamp for Plano 777 fishing box. Print with 0.1 mm layers and increase temperature +5 degree for better rigidity. Put on flat surface. No supports needed.
- Downloads
- 54
- Likes
- 10
- Rating
- 0
P
Printablesctheroux
Mounting plate for Arduino UNO/Duemilanove/Diecimila
A simple mounting plate for the Arduino UNO, Duemilavone, Diecimila, Freeduino or any other compatible boards. Use #4-40 screws to mount the board on the mounting plate.
- Downloads
- 53
- Likes
- 5
- Rating
- 0
P
Printablesnomad
holders for battletech for plano model 3750 box
wanted to keep my mechs from banging around so made this on tinkercad hope its usefull
- Downloads
- 51
- Likes
- 8
- Rating
- 0
P
Printablesollioddi
Mellanox ConnectX-3 MCX312B-XCCT 4010 blower fan mount
Made for a 4010 blower style fan. The one i have is 5V which i've connected through a USB cable. Afaik it's also available in 12V variant. I cannot tell you if it fits other 4010 fans like this, but the size does seem standard. The fan…
- Downloads
- 50
- Likes
- 9
- Rating
- 0
P
Printableszsohn
Plano Tacklebox Divider Inserts
These are Inserts for a Model 3600 Plano Molding Tacklebox I've included the stl files for the Divider only, the support "sprue" I'm using, as well as a number of arrangements for printing multiples on an extruder machine. I'm still…
- Downloads
- 50
- Likes
- 5
- Rating
- 0
P
PrintablesINSANEWAVE
Temper for cafflano kompresso
Compact and handy hand tamper Cafflano Compresso. It can be put inside the case, without the need to carry separately from the coffee maker. Like this design? Check out my own models and remixes: INSANEWAVE Also you can buy me a coffee:…
- Downloads
- 50
- Likes
- 4
- Rating
- 0
P
Printablesssweat
Plano Archery Case Replacement Carrying Handle
While traveling with my expensive case the luggage handlers lost the handle off my Plano Archery case (due mostly to poor design) that I use for my metal detecting gear, making it a real hassle to carry it out of the airport.. After no…
- Downloads
- 50
- Likes
- 8
- Rating
- 0
P
PrintablesSaule
Plano Organizer Case Divider
The plano organizer I bought didn't come with enough dividers. They were also too loose and slide out easily. I created this replacement that is more snug. The product I use these in: Plano 23600-01 Stowaway with Adjustable Dividers Print…
- Downloads
- 50
- Likes
- 14
- Rating
- 0
P
PrintablesPointShadow
Plano Stow 'n Go & Guide Series Storage - Replacement Latch
I tried to make the latch as visually close to the original as I could, with optimizations for printing. I recommend having a couple small supports for the end tab and the retaining rail that both overhang. Printed using Overture Matte…
- Downloads
- 48
- Likes
- 2
- Rating
- 0
P
Printablespcpopper
Billy Bookcase slide for Plano Stowaway 3700 Tacklebox
This allows for the Plano Stowaway 3700 tackleboxes to be hung in the 15 ¾" (40cm) Billy Bookcase using the pin holes. I have mine spaced every 2 pin holes and it gives the perfect spacing. Print as oriented with organic tree support on…
- Downloads
- 47
- Likes
- 14
- Rating
- 0
P
PrintablesFlorian Castellane
Mellanox ConnectX-6 Full Length PCIe Bracket Shield
Printed in PETG. I advise against printing in a temperature-sensitive material like PLA because the card can get quite hot. Huge thanks to David Fish for the original design – I love that this can be printed flat then bent for the 90…
- Downloads
- 46
- Likes
- 1
- Rating
- 0
P
PrintablesAT Studio
Villanous deckbox - Board Game
Design based on the idea of MC Taz Man. Soon I will create my own insert design where I will include this concept of separating all the villains by decks. These boxes hold the 45 cards of each villain with sleeves. Thanks to the lower…
- Downloads
- 46
- Likes
- 9
- Rating
- 3
P
PrintablesSlotracer
Replacement Latch for Plano Sportsman's Tote 1619
I ended up with a used tote that was missing a latch, so I modeled one. I printed in PLA, 3 walls, 20% infill, and it is holding up fine so far. In the photos the black latch is an original Plano part, the grey latch is a printed…
- Downloads
- 45
- Likes
- 5
- Rating
- 0
P
PrintablesMar Ber
Plano Verleimpresse - Ersatz & Ergänzung | Plano gluing press - replacement & addition | Fusion-Files
english text below Fußkappe: Vor Jahren habe ich eine gebrauchte Plano - Verleimpresse erhalten. Schon damals haben ein paar Fußkappen für die Verleimprofile gefehlt. Zwischenzeitlich habe ich diese durch Holzteile ersetzt, doch nun habe…
- Downloads
- 44
- Likes
- 4
- Rating
- 5
P
Printablespablo granel
Piedra Roseta Doblada Al Castellano
Se trata de una simulación de la piedra roseta que traduce del egipcio, doblada al castellano. Gran gatget para juegos, Salas de escape, jincanas, etc.
- Downloads
- 44
- Likes
- 3
- Rating
- 0
P
PrintablesBuschLightBombR
Plano 7771 side door
Within the first two years of owning a 7771 series tacklebox made by Plano , the tab holding this door shut snapped off. I was recently in a Scheels store, looking at a 7771 tacklebox, and I could already see stress marks on a brand new…
- Downloads
- 43
- Likes
- 3
- Rating
- 0
P
PrintablesRocketman72
Plano 3700 StowAway Dividers
These dividers fit the Plano StowAway 3700 utility boxes. These have the chamfered bottom corners as compared to the other Plano dividers available. The dimensions are 1.8"x1.6"x0.94"
- Downloads
- 43
- Likes
- 2
- Rating
- 0
P
PrintablesRex
Mellanox SX6036 Rails
Basic rack mounting rails for a Mellanox SX6036 switch. The switch side rails sit in a groove on the rack side rails, very similar to a French cleat. These are meant to be used as static rails. You will need to print two of each model. I…
- Downloads
- 43
- Likes
- 2
- Rating
- 5
P
Printablespala-dim
Gloomhaven 2nd edition storage insert to use with Plano boxes
Simple card tray and holders for the miniature tuckboxes, monster stat cards and sleeves, and sealed boxes. This is intended to be used with Plano boxes (or equivalent) to store the overlay tiles, monster standees, and condition tokens,…
- Downloads
- 42
- Likes
- 4
- Rating
- 0
P
PrintablesHans25
Rope buttons M4 screw / knoflik na gumolano
Button for securing a tarp to a trailer using a bungee cord. The model uses an M4 nut/screw.
- Downloads
- 41
- Likes
- 8
- Rating
- 0
P
Printablesb1tshifter
Plano 3600 Box
[Update] He's back, baby! @SteveMYoung_198873 has updated and reposted his design as parametric & supporting a bunch of Edge boxes. Find them over here A remix of thing 5219470 which has gone missing. This is remixed to sit nicely in a…
- Downloads
- 40
- Likes
- 6
- Rating
- 0
P
PrintablesBob B
Plano 3700 Dividers
My Son-in-law was complaining about storing his fishing gear in these containers and how the dividers always pop out and allow the gear to roll around in the box. While the containers themselves are fine, the dividers are rather flimsy…
- Downloads
- 40
- Likes
- 5
- Rating
- 0
P
Printablesswooloose
Lenovo Tiny Bracket for Mellanox ConnectX-4 CX4121C SFP Card
A bracket for the Lenovo Tiny computers that is made to fit on the Dell CX4121C Mellanox ConnectX-4 SFP Card. The bracket was printed with the internal part facing down so that the hexagon holes would look a bit cleaner once the supports…
- Downloads
- 39
- Likes
- 4
- Rating
- 0
P
PrintablesAinon3Dtisk
The triumphal arch of Milano
Hello, Welcome to my profile, full of models and miniatures :-) I have for you the Triumphal Arch of Milan for an exhibition or diorama. A very nice structure. It is suitable for coloring. My kids absolutely love it :-). It prints really…
- Downloads
- 38
- Likes
- 6
- Rating
- 0