Counting matching models…
Clapper Slate (aka Clapperboard) is a single print, with no assembly required. I have been looking for a clapper slate for a while and could not find a authentic looking one, so I decided to create one base on a typical cliche design. The…
*****DONT USE THE GCODE IT WAS ONLY FOR THE TIME ESTIMATION**** Clapper board or slate created from scratch. This was designed to be printed in 2 colors, I uploaded the stl separated so you can use the Z-offset extension in Cura to print.…
I saw a mouse trap on YouTube (Shawn Woods' Mousetrap Monday). It was all in plastic and it seemed to work pretty well. I decided to put my design skills to work to see if I could make something similar. In this version I have not yet…
Printed in PETG except for the letters that were printed in TPU. The TPU letters make them easier to stick and we guarantee that they will not break when removed from the printer bed. Layer 0.2 TPU 95A
A simple adapter to allow you to mount a 76mm/3" intake/filter onto a Bosch flapper/vane-type airflow sensor with an ~82x37mm bolt pattern, as found in many late 80s to 90s cars such as BMW E30/E36, VW Golf Mk2/Mk3, Mazda MX5/Miata…
The wooden clapper and sail on my wind chime set disintegrated in the outdoor weather a long time ago. I used Tinkercad to design some replacements and printed them in IC3D Brazz R-PETG. In the attached 3MF file I used 60% cubic for…
As the Olympics approach, celebrate your favorite athletes by cheering them on. Print this easy to assemble clapper to make some noise for your favorite athletes while they compete. Also great for any parties or kids. Assembly: You would…
This part is to be used in conjunction with Booligan Shooting Sport's Cheek Clapper kit: https://odysee.com/@BooliganCustomGunworks:f/CP33-Cheek-Clapper-Kit Instead of needing to have a riser to attach to the low pic rail of the original…
This skimmer weir is an odd size and is designed to fit the Olympic wide-mouth skimmer that has a 6-5/8" opening. Most wide-mouth skimmers have a 5-5/8" wide opening. My original weir had one of the tabs that act as a hinge pin break off.…
no glue needed, no suports needed layer 0.2 material: PETG, PLA nozzle: 0.4 I look forward to your prints. Send a photo :-)
Claqueta de Cine de juguete infantil Print Settings Printer: Anycubic zero 2.0 Rafts: No Supports: No Resolution: 0,3 Filament: Geetech PLA Custom Notes: Para ensamblar, pegar pestañas (pieza 3) en la parte superior derecha de la pieza 1,…
Easily printable and ergonomic clapper board for A/V synchronization in video shooting. Vitamins needed: M4x30 hex head screw, x3 M4 square nuts , x4 The model is fully parametric and can be scaled or easily adapted for other vitamins. I…
The HailSquid Sticker Slapper is a tool for sticker graffiti artists to slap their stickers in hard-to-reach places. Attach the sticker to the roller, extend the stick and slap it. Use the roller to smooth out and apply pressure. Parts…
Enjoy making some noise. No need for extra parts, functional after assembly. Can be easily slided/snapped on together according instructions available among pictures. Designed for 0.2 layer height. For me works fine with PLA. Tolerances…
3D model of a clapperboard, for your personal video projects
Remixed from 3828610 to create a flat-surfaced multi-material clapper. You will need a printer with at least 2 extruders to print this. Text and in-lays have been merged down to make a flat, smooth surface. Looks very nice with Ironing…
Nice coaster set that combines two color pieces, this way you can print it without any filament swap or multi color system. You can also print the holder to keep them organized. STL files are already preoriented flat on the bed, just…
Print and assemble your own naruko for Japanese odori. Supports needed only for red end block indents. Vertical version of handle also available for support-less prints. After printing one of each file (per clapper) assemble as follows:…
A small clapperboard keychain perfect for film lovers, videographers, or anyone into cinema aesthetics. Print settings used: Nozzle: 0.4 mm Layer height: 0.16 mm Color change required: switch from black to white at layer 16 (of 18) to get…
Grab 2 spoons and you got yrself a spoon clapper. Pls do check measurements of yr spoon and adjust accordingly. Print without supports.
Taille / Size: 145x72x3.4mm
A replacement fly swatter I designed when my cheapo swatters head shattered into several pieces after becoming stiff and brittle. I printed in Overture high speed 95A TPU at 100% infill. It should replace any fly swatter head with this…
Summary a clapper to fit https://www.thingiverse.com/thing:4176717 https://www.printables.com/model/223214-acdc-hells-bell and insired by https://www.thingiverse.com/thing:6719804 i designed my own clapper with no supports , cone and…
🎄 One-Piece 3D Printed Bell with a Movable Clapper A simple and elegant Christmas bell designed to be 3D printed as a single piece. The special part of this design is the integrated movable clapper — the bell and its clapper are printed…
A film clapperboard with the inscription: "Movie Park Germany" in Bottropp in Germany. Used as decoration.
Three parts. Hanger Bell body Clapper Print orientation as in the files Check out the .3MF files for supports Screw the hanger into the bell and then screw the clapper to the hanger screw. It doesn't sound much but it works but should be…
Toilet was leaking, needed to replace the flapper valve assembly. Didn't have the right tool for the gigantic nut under the flapper valve so I made one. Fits a 2 inch flush valve nut, not a 3 inch one. Instructions PLA, 4 shells, %60…
This is a super simple clapper-board i made because i needed a fast, easy, and functional print. so i came up with this. i use it for syncing my mic audio with the video for my youtube channel, SUBSCRIBE :) (71) Cgamez - YouTube also, use…
I was looking for a demonstration vehicle to try the 350C hotend on the new Elegoo Centauri Carbon 2. I wanted to try the new Polymaker PPS-CF10. Jsmaz3 made a fantastic handbell model ( Make of PPS-CF10 Bell by Simple3D | Download free…
Bring cinematic style to your workspace with this 🎬 movie clapperboard-inspired storage container. Designed to replicate the iconic look of a film slate, this 3D printable box combines bold movie-set aesthetics with practical everyday…
This is a remix of my Mauser lug lapper. I've made several improvements to the design. It's now modeled in cad with easy to change parameters so it can easily be adapted to different actions. This is for a large ring Mauser with a 1.1"…
This is for a small ring Mauser with a .98" 12tpi thread. It will also work with Gewehr 88s. The plunger is a welding tip from a Bernard q-gun. A 5/16" bolt could also be modified to work. The plunger can be 3d printed.…
A clapperboard cookie cutter. For 5mm thick cakes. Foremka do ciastek w kształcie klapsa filmowego. Do ciasta o grubości 5mm.
These clapperboards can be used for creating a wet clapperboard or one with a neat design. Add some velcro strips to the back of the slate for easy storage of the tags. Show me your slate designs! The full set STL includes: 6x 0 6x 1 6x 2…
hand clapper, very NOIZY. For football fans. easy assembly and print.
"Anti klapper" Hörmuschel für Panasonic KX-TGA651EX ist für Hörgeräteträger entwickelt die akustisch durch den mechanischen Kontakt des Telefons am Hörgerät und den daraus entstehenden Stör/klapper/raschel und Stoß-Geräuschen gestört…
Mich haben die klassischen Portemonaies a la > 2 cm Lederlappen immer genervt. Entweder ich bekam Rückenschmerzen, wenn ich darauf saß oder ich habe es irgendwo liegen lassen. Es gibt nun viele Mini-Wallets zu kaufen, oft aus Alu. Diesen…
This is a 3d printable tool for lapping the locking lugs on a bolt for a large ring mauser. I used a 3/8" spring 1-1/4" long. A 1/2" bolt 1/2" long is used to adjust the tension on the spring. I have included a 3d printable bolt for those…
This model is a dedicated Nicolai Eboxx Slapper, it's ment to be printed in TPU and then thermoformed on to the chainstay using heat. It's designed around the QLF chainstay but should be compatible also with KLF models produced later. The…
A simple Clapperboard using standard 90mm square office Paper as a writing surface. Uses a 608 bearing, an M3 Bolt and a M3 voron standard heat set insert. If you dont have a 608 bearing, you can find a 3d printed version here (Though you…
Clapperboard belt clip: Fits all clapperboard with a bottom stick size of 25mm in hight and 27mm in width. Specifically designed for this clapperboard:…
this is a film slate board marker holder
Wanted a better clapper for my bell, also with its stand to avoid it rolling around on the shelf. The clapper is 140mm tall. Printed with Geeetech Wood PLA, 0.12mm layer height, 8% infill, no supports. Glad to see some makes and likes :)
Coming close to the end of year festive time, here's Slapper with a fun festive cosplay! This attaches onto Slapper in his alt mode, by notching onto the articulated claw bit on his back. And in this missiletoad mode, hang him up and get…
What’s up guys, it’s almost Independence Day so it’s time for a patriotic print. This mech will ensure that your flag is always waving. Perfectly sized to fit on your desk and show of your national pride. Print details, assembly, and…
Eine von mir entworfene Box für die Karten und Spielfiguren für das Spiel Tempo kleine Klapperschlange. Oft gespielt selten ordentlich aufgeräumt, sorgen diese zwei Boxen für mehr Ordnung beim Spiel.
You'll need a 1/4-20 x 12 heatset threaded insert No supports needed I printed in PETG but any filament will do
use your smoothest plate contact area is 0.2mm or 0.4mm thick, so adjust first layer to 0.2mm to print in single layer or double rotate the model so the 1st layer print lines are aligned with the wiping direction, in my case rotated 45…
I picked up a repro Hosoi Street board for nostalgia. Since it was my first "real" skateboard back in the 80's, I wanted to deck it out the same way I did way back then with all the bolt-on rails and guards. I finally found a NOS…
Same exact model as what I remixed from, added 10 mm to the height, made the tabs 100% in fill
Flapper for vent cover they seem to be always made from thin filmsy plastic that falls off within a year. This print fit
Introducing the World's First One-Handed Clapper. Humanity has been clapping with two hands since time immemorial, but that changes today ! Alfred Hitchcock, Federico Fellini, Steven Spielberg - all clapped with two hands, but you don't…
An extension for the Umbra Flapper Coat Rack ( https://www.umbra.com/products/flapper-coat-rack ) that adds three more hat hooks. Easy to install: slide the hat rack extension over the top of the Umbra Flapper Coat Rack. Created with…
A Christmas bell that really jingles: the clapper is printed inside the bell in one go (print in place) and swings freely once you hang it. Ø55 mm, 74 mm tall with the hanger. Raised holly leaves and berries on front and back, a red bow…
First ever post, bear with. This Jaws movie prop is fully functional and does “clap”. Print all plates, welcome to edit your print speeds/other settings if you want, I only have a P1S and the settings in the file are what worked best for…
Large 3 inch Toilet Flapper TPU
These clapperboards can be used for creating a wet clapperboard or one with a neat design. Add some velcro strips to the back of the slate for easy storage of the tags. Show me your slate designs! The full set STL includes: 6x 0 6x 1 6x 2…
I was looking for a demonstration vehicle to try the 350C hotend on the new Elegoo Centauri Carbon 2. I wanted to try the new Polymaker PPS-CF10. Jsmaz3 made a fantastic handbell model ( Make of PPS-CF10 Bell by Simple3D | Download free…
To be sure there no bee anymore in the upper part of your hive. Need to be fixed by screw on dedicated plate to split colony and permit to have upper hive part without bee. Let it in place half a day, and it's good to collect honey. A…
Flapper for vent cover they seem to be always made from thin filmsy plastic that falls off within a year. This print fit
You'll need a 1/4-20 x 12 heatset threaded insert No supports needed I printed in PETG but any filament will do
Dryer vent flapper, included Autocad IPT file to resize as needed. Hole in top uses filament or other wire for the pivot point.
This is a toilet flapper for 2" flush valves (50mm, ~size of a baseball). It has a much simpler shape than injection molded flush valves because we can get some benefits from 3D printing. See below if you're curious why this design works.…
🥁 Cajon Clapper with Rattle: Your Next Rhythmic 3D Print! Introduce a sharp, distinctive "clack" and a vibrant, dynamic rattle to your musical arsenal with this innovative 3D-printed cajon clapper. Engineered for percussive clarity,…
To be sure there no bee anymore in the upper part of your hive. Need to be fixed by screw on dedicated plate to split colony and permit to have upper hive part without bee. Let it in place half a day, and it's good to collect honey. A…
The Fluidmaster K-400H-039 kit has a 2 inch flapper which is incompatible with a Kohler 1-piece toilets because the width of the yoke on the plastic part of the flapper is not wide enough to accomodate the rectangular piece in the Kohler…
Replacement for inground pool skimmer flapper. Print instructions Prints well with PLA or PET. Use the enclosed 3mf for optimal settings. The STL is also included. If you print in PLA, you will most likely need to remove the screws on the…
I'm very happy with the original design and mounted it on the inside of a cabinet door in the kitchen. Unfortunately there seems to be shorter paper towel rolls available which will not hold without changing the wall mounts. So I quickly…
Not sure on a specific name of this style, I just reverse engineered the old one. It looked just like the one in the picture, snaps on. You will need to print in a soft TPU, I used 85A Ninjaflex.
I printed using measurements from my original toilet flapper since the standard blue flapper doesn't work. The parts are glued together and the rubber seal is fitted in between. The diameter of coverage of the flapper is 70mm. Distance…
I was fixing toilets in my house and found Peterthinks' wrench design for the big hex nut on 2 inch flush valves. It worked great, but I also had a need for an 8-sided nut wrench as well to mount the new valve. I took inspiration from his…
Jacuzzi B128 - Flapper Arm (HF04000) Temp Fix for Toilet Flapper Arm. Was needed and designed during COVID lockdowns. Supports: No
A small puzzle, that allows you to build a miniature model of a hummingbird-like flapping wing drone. Instructions: Print in PLA or PETG, 0.2 or 0.3 mm layers. Optionally, change color of the last layer to increase contrast of the logo.…
(Imported from my models on Thingiverse: https://www.thingiverse.com/muchtall/designs ) Based on https://www.thingiverse.com/thing:3585059 and remixed in Tinkercad ( https://www.tinkercad.com/things/lfhW2cqGIi8 ). Scaled original to 87.7%…
This is a remix that uses no supports and no glue or screws (so far). That way, if it breaks, much easier replacement (45 minute print) I used Shapr3D to make a cover piece (PLA) to cover the gap made by the broken flapper (image…
This is a replacement toilet flapper. The lower bulb is roughly 40 mm diameter at its widest part x 32 mm long. The top "brim" is about 100 mm diameter x 12 mm high. The "fins" in the back extend about 50 mm away from the brim. I printed…
