Counting matching models…
This is a simple, but elegant, rear lenscap for Minolta SR (also known as MC and MD) mount lenses. These lenses were used on Minolta SLRs from 1958 on, but were essentially orphaned after Minolta moved to an autofocus mount in 1985…
A small lens cap for the DJI Osmo Action action camera. Knurled edge, embossed “DJI” on the front to remember what it is the lens cap for. One version with eyelet for attaching a loop of string, one without.
A simple bin for different Sony lenses. You can store them with the rear lens cap or use the bottom of the bin as a lenscap
This is a simple, but elegant, rear lenscap for M42 "universal thread-mount" lenses. The M42 lens mount was created by Zeiss in 1938 and saw common use in Pentax, Practica, Zenit, and other SLRs until around 1980, but has become popular…
This Lens cap is designed to be printed without supports at 0.15mm layerheight and has some tight tolerances so the locking mechanism most likely has to be broken loose wich is best done by carefully bending the parts in different…
Lenscap and hood for the Olympus Pen S Category: Camera
External lenscap for 42mm bore lenses (or whatever thats that size). Made to snugly fit a Zenit Jupiter 8 LTM Inner bore is 41.98mm and will perfectly fit the lens if your printer is calibrated. Be aware you might have to re-print with %…
Simple lenscap with knurling to match the design language of the camera. Made to be printed in TPU. The model does have quite tight tolerances, but the friction fit is perfect printed on my Prusa MK3 with “Fiberlogy TPU Fiber 40D". If…
Fitting an eyepiece from a telescope on a camera lens creates a simple spotting scope. The hole is 1.25" which seems to be the most common size of eyepieces. I found that with this design the eyepiece gets a little bit to close to the…
Lenscap for Olympus Trip35 or PEN There are two versions, one is the conventional and the other will cover the selenium cells only. Category: Camera
I bought this camera a few weeks ago and it came with a metal lenscap but I found it was incredibly difficult to use as it required a lot of force to snap onto the photo lens, so I made a copy of it but changed some things to make it fit…
Simple and straight to the point. The SIOnyx is a fun night vision device, with a glaring issue. The front of the device is flat, no lip for protection, glass. It is so easy to accidentally scratch the lens and traveling with it there is…
A simple cap for the backside of SLR style Rolleiflex cameras. The small version is suitable for longer lenses. I personally tested it on the Carl Zeiss 250mm f:5,6 version. Meanwhile the larger version is suitable for all Rolleiflex SL…
Created with Rhino 3D
created to fit on a Leica ELMAR 5CM lens that didn't have a lenscap. The inner diameter is 36mm. There is a small lip (? I'll keep looking for the correct word….) that keeps the cap sturdy in place. I did not remove any material here, but…
Front and rear lenscap, and 60mm conical lens hood. I have not tested lens hood but according to my calculations it should not vignette on 4x5.
Dear camera friends, I've created this simple to print/use Lenscap holder with a hot shoe mount to stop loosing and misplacing my lenscaps. I hope I can also help some of you guys out there with a similar problem. The holder works for all…
Lenscap for my nikon 400mm F2.8 fron Z-mount Need minimum 4 screws, you can use 2 more to fix the spring part, but not necessary
A small lenscap for the Instax EVO to protect the lens. You can make a strap on it to mount to not lose it.
My thing http://www.thingiverse.com/thing:414556 was a really quick and easy 3D-printable screw-in front lenscap design, set-up as a customizer application. Less than $0.15 worth of materials are used to make a typical size lenscap, yet…
Replacement for lost Lenscap. Fits on the Minolta 50mm Prime. Should also fit on the non AF Variant.
Canon 24-105 F4 lenscap for the use with a 82mm step up ring. If you want a different text just change it in the Fusion file. For the filmmakers out there that always leave a 82mm step up ring on their lenses to use with filters. Two…
Designed to be printed in ASA, ABS. For PETG you might have to scale down the model a little bit. Infill: 15%
Here's a really quick and easy 3D-printable screw-in front lenscap design, set-up as a customizer application. Less than $0.15 worth of materials are used to make a typical size lenscap, yet they work well and can even double as color…
Case for the tomtom bandit with room for a few SD carts, an extra battery and some extra's. I printed the lens cap and the case top out of TPE, but TPU or any other soft to semi soft flexable material would do. Case bottom is printed out…
This is a lenscap for Nikon Z mount that takes up about the same amount of space as the OEM cap, but is double ended, meaning you can attach a lens to both sides of it. This makes for a more functional lenscap that not only performs the…
Might need some adjuments as the 45mm diameter is not 100% consistent on all 135BC. Just increase size in your slicer slightly and you are good to go.
a-mount lenscap, bottom snaps to gridfinity baseplates
Lenshood for your Fujifilm Camera with this Lens. Its better then the original because you can loose the lenscap with force from the side. scale the cap in different sizes and prrint them out. you can print it bigger then it needs to be…
For my new Kandao Qoocam 8k a hard lenscover / lenscap like i did for my Insta360 One X Print Settings Supports: Yes Notes: Sand the edges and surfaces very good after printing Category: 3D Printing
A slip-on lens cap with a flip tab, making it easy to remove from your Fujica GS645S camera. Made for 49mm filters. Print in draft mode and use PETG filament. Do you like it? Please consider to buy me a cup cup of coffee . That would make…
Lenscap for my nikon 800 F/6.3 Z-mount Need minimum 4 screws (M3x8mm), you can use 2 more to fix the spring part, but not necessary
Lenscaps for ISCO Optic 120mm and 90mm f2 lenses
Protective cap for Norita lenses. Print Settings Printer Brand: JGAurora Printer: JGAurora A5 & A5S Rafts: No Supports: No Resolution: normal Infill: 30% Filament: - PLA black Notes: With the top down it does not need supports Category:…
Deckel für das Nikon Fischauge 8mm f2,8. Beim Aufschrauben oder Abschrauben keinen seitlichen Druck anwenden sonst klemmt das Gewinde. Der Kunststoffdeckel ist leichter verformbar als der originale Metalldeckel. Es empfiehlt sich das…
Simple lenscap i made for the olympus pen EE2.
Made in FreeCAD. Deep enough so that the aperture engagement pin doesn't collide with the cap. Chamfered both top and bottom for more comfortable handling.
This object was made in Tinkercad. Edit it online https://www.tinkercad.com/things/8j5yenNfO0n
Similar to my concept for a double-sided lenscap for Nikon Z , this is a cap for Canon EF lenses that is just a bit taller than the original lenscap but is double-ended, meaning you can attach a lens to both sides of it. This makes for a…
The Askar 91F dewshield performance sleeve lens cap is necessary to complete the performance sleeve upgrade. This cap can also work simply as a replacement lens cap for the Askar 91F if you lost yours as well. Askar 91F dewshield…
Lenshood for your Fujifilm Camera with this Lens. Its better then the original because you can loose the lenscap with force from the side. scale the cap in different sizes and prrint them out. you can print it bigger then it needs to be…
Deckel für das Nikon Fischauge 8mm f2,8. Beim Aufschrauben oder Abschrauben keinen seitlichen Druck anwenden sonst klemmt das Gewinde. Der Kunststoffdeckel ist leichter verformbar als der originale Metalldeckel. Es empfiehlt sich das…
