Counting matching models…
Pferdehalfterhalter für Schleich Horse Club Halfter. Gedruckt ohne supports mit 0.16 Layerhöhe Ich habe auch eine Datei ohne Schriftzug hochgeladen. Damit ist der Halfterhalter individualisierbar. Für das Brettermuster habe ich im Slicer…
M3 halftrack chasis and drive train model. Also added short frame version of STLs. They were the only part that needed a plus size printer. They can be printed and joined if printing on normal size bed. If you get this built the body is…
Lots of parts, many moving pieces, some tiny pieces, but fun to assemble if you like a challenge. Will add some additional decor later. While you can print at whatever detail works for you, this was printed at .2mm layer with the…
If you get through the build of Another M3 Halftrack you probably want to add a few options here. Headlight brushguards 50Cal pulpit Rear seats 30Cal ammo cans gas cans fender box shovel, pick, axe spare road wheel You can get the tire…
This is a remix of Livingroom Workbench 's design for an IKEA ALFTA. I made some changes to the model to make it better compatible with Tesa powerstrips, which are a bit smaller than IKEA strips. The model comes in two versions: The…
Drucken Sie 2 Kugelhälften und verkleben Sie diese anschließend mit einem geeigneten Kleber, z.B. UHU Hart Spezialkleber.
Two things included: 1:1 clone of the IKEA ALFTA hook Custom version for the RIBBA picture frame with the deep hooks on the back. Some RIBBA frames work with the original IKEA hook, but some need this one because the hook doesn't reach…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Filament sample einfach auf einer Spule bringen. Keine support notwendig
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 300x300mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 1.7mm…
Print the lower part with the gap for the blade laying on the outside of the handle, the top cover can be placed with the inside on the bed. Can also be mounted on both sides of the blade to improve cutting force, but reduce usable blade…
This is the IKEA HALFTA! Based on the IKEA HALFTA but half the size. While there hooks are cool. Most picture frames do not need two strips of adhesive. So I made the HALFTA. Not a perfect copy, but a better copy. This can be printed…
if you enjoyed the half time show, you will love this. fits on most printers and prints in under 2 hours.
File redesigned to be used with the selftapping screws of the original DT990 Pro Sliders
Perry Rhodan series that were published in the 60's (Over 3.000 books of approx 70 pages comprise the epos). More infos under https://www.perrypedia.proc.org/ The Ship has a diameter of 200m. It's a LFT heavy cruiser of the Minerva class.…
I shall harness all the cords dwanglin' from my cheap closetMaid shelves. If you too have cord dwanglin chaos... don't
Meet Golftopus —the only creature in the ocean who’s handicapped by having too many arms. Forged from the rarest species of deep-sea golf balls, the Golftopus spends its days perfecting its swing, despite having no idea which of its eight…
A unique 3D printable creation — this One Twelfth Scale Kitchen Dish Drying Rack, With Dishes, Dollhouse Detail Tested on 8+ FDM printers. Download and print immediately. **What's Included:** - STL File - 3MF File - OBJ File - Print Guide…
🎭 Name : PredAlftor – Cat Hunter 📍 Origin: Somewhere between Melmac and the jungle planet of deadly invisibility 🎯 Mission: Stalk, snatch... and snack on cats. Meet PredAlftor , the unholy fusion of a space-faring Predator and Alf, the…
Druck in PETG 60 % Infill Stützen überall. Viel Spaß
A general Tile Holder/frame/protection. The angle in which the tile rests is adjustable to 5 different angles. The front has ornate decoration, meant to follow the curves of the original paint. To match the natural appearance of the often…
Perry Rhodan series that were published in the 60's (Over 3.000 books of approx 70 pages comprise the epos) The PHOBOS class has a diameter of 60m. The model has a scale of 1: 2000. The PHOBOS class is a modular spaceers. Time-line: 1514…
A unique 3D printable creation — this One Twelfth Scale Kitchen Blender, Glass Jar Style, Dollhouse Appliance, Miniature Tested on 8+ FDM printers. Download and print immediately. **What's Included:** - STL File - 3MF File - OBJ File -…
Helps make clean ring casts when sand casting and allows casting some negative space features like prong settings. Simply fit your ring mold or model onto the core and build up your flask as normal. Then replace the core and model with a…
A WW2 halftrack transport replica accurate with simple details
The pivot axle for a Wolftooth mountain bike seat post dropper controller. Part can be purchased online, I figured that out after I designed this lol. I printed it at .16 layer height with normal auto supports. Printed in PETG. Fits…
open slot repaired in Bau-Plättchen_Hälfte_2
I wrote a small program to generate this. Also made it to fit that frame I got from Target. I wanted a less visible seam so I chopped it off along the circles.
A unique 3D printable creation — this One Twelfth Scale Drip Coffee Maker, Miniature Kitchen Appliance, Detailed Dollhouse Tested on 8+ FDM printers. Download and print immediately. **What's Included:** - STL File - 3MF File - OBJ File -…
Credits for the tracks, roller and wheelpins got to IDEA 1.61 . Nice old vintage halftrack with movable wheels and tracks.
Perry Rhodan series that were published in the 60's (Over 3.000 books of approx 70 pages comprise the epos) The space-jet has a diameter of 100m and a height of 25m. The ship class is used as a dinghy for large units. Or the ship unit is…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 100x100mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 1.4mm…
Remixed from Waynemc and M_Bergman's models Fully crewed halftracks, ready for use 1/385 scale Category: Toy & Game Accessories
Another quick optical illusion motor visualizer. This gives a nice 3d effect, almost Death Star in its' appearance. Like my others with fine details, a 0.25mm nozzle is highly recommended, again the Revo 6 is the way to go on this front.…
Perry Rhodan series that were published in the 60's (Over 3.000 books of approx 70 pages comprise the epos). The space-jet has a diameter of 57m and a height of 16m. The ship class is used as a dinghy for large units. Also there is a non…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 100x100.44mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 1.5mm…
das Model ist so modeliert damit man es einfach drucken kann man braucht lediglich support für die spitze daran arbeite ich bereits dies zu beseitigen
Perry Rhodan series that were published in the 60's (Over 3.000 books of approx 70 pages comprise the epos). More infos under https://www.perrypedia.proc.org/ The Kallisto-class starships are fleet tenders of the LFT. The ship has…
Dieses Modell ist eine moderne Interpretation der Halbton-Grafik im dreidimensionalen Raum. Die Oberfläche besteht aus einer präzisen Matrix von Vertiefungen, deren Größe sich über die Fläche hinweg verändert. Dadurch entsteht ein…
Diese Einlage passt in die getrennte Filamentbox V2 von @makerbull. Die Ausnehmung auf der Unterseite passt über den, durch die Trennung bedingten Steg der Boxhälften.
Premium Parametric Speaker Grille Generator (OpenSCAD) Easily create high-end, automotive-style (Burmester-inspired) acoustic grilles for any speaker size. Instead of a basic square grid, this OpenSCAD generator uses strict polar math to…
This is a US M3 Halftrack with a Stuart Turret and mech legs. There's two types of legs
A unique 3D printable creation — this One Twelfth Scale Pop-Up Toaster, Retro Chrome Look, Dollhouse Kitchen, Miniature Tested on 8+ FDM printers. Download and print immediately. **What's Included:** - STL File - 3MF File - OBJ File -…
This probably would look better if you didn‘t print it on an Anycubic Potato… Another simple modesty mesh mod. I liked the idea of hiding the electronics, but I didn’t want the aesthetics of an open infill. I designed a radial gradient…
This is a very simple stand for the Covid Selftest tube. Holds tubes with a diameter up to 9mm. I printed it with PLA, 0.2mm Layer, 10% Infill
This two-part print stops a ShelfTrack shelf from accidentally popping up and out of its rail. Slide the ProngBlock in and up, then slide the Wedge between the ProngBlock and the shelf. To remove, slide the Wedge sideways. Most important…
Update: Now included V2 with more wheel bite protection. Grind block for LFTOVRS FM Aggressive Inline Skate Frame. PLA+ 100% infill. Clean the hole with an 8mm drillbit. BTW, not affiliated with the LFTOVRS brand. Just made this to have…
Lovely keychain celebrating mother's day. Good as a gift or simply because you want. You can choose your colours using studio
halftone face hueforge 3D Print Instructions --------------------- Layer height: 0.020 mm First layer height: 0.200 mm Recommended: Layer loops: 1; Infill: 100% Start with color: #ffffff Color swap plan: 1. Start with #ffffff 2. Swap to…
just print without support. 15% infill
Add a bold soda-shop vibe to your space with this Pepsi Zero Sugar Halftone Lightbox. Featuring the classic red, white, and blue Pepsi look, a strong halftone background, and bright illuminated lettering, this design works great in game…
This is a simple sleeve that replaces the rubber bands on the WolfTooth EnCase hex bit wrench. I got tired of the little bands rolling off every time I pulled it out of my seat bag. The tube has a little rib that snaps into the spot the…
Setting tool for 44mm crown race standard
I have a halftop and wanted to use it at my media center, so I made this the laptop I use it with is an ASUS Vivobook 15 X512D. the stand is designed for half/laptop with thickness ≤ 13.5mm PLA should be fine, I used eSUN PLA-HF.
A unique 3D printable creation — this One Twelfth Scale Floor Lamp, Modern Style, Curved Shade, Dollhouse Living Room Tested on 8+ FDM printers. Download and print immediately. **What's Included:** - STL File - 3MF File - OBJ File - Print…
I wanted to hang up some PVC pipes on my garage shelving without using a whole shelf, so I made these little plastic inserts that slot into the Closetmaid Shelftrack brackets. I'm using it with 12" long brackets but it should fit other…
Wenn man aus einem Filamenttrockner heraus drucken will, dann muss der überstehende Kabelbinder entfernt werden. Sonst beschädigt dieser die innenliegende Isolierung der Trockners. Leider fallen dann die Spule in zwei Hälften auseinander.…
Lots of parts, many moving pieces, some tiny pieces, but fun to assemble if you like a challenge. Will add some additional decor later. While you can print at whatever detail works for you, this was printed at .2mm layer with the…
This is a US M3 Halftrack with a Stuart Turret and mech legs. There's two types of legs
halftone face hueforge 3D Print Instructions --------------------- Layer height: 0.020 mm First layer height: 0.200 mm Recommended: Layer loops: 1; Infill: 100% Start with color: #ffffff Color swap plan: 1. Start with #ffffff 2. Swap to…
A unique 3D printable creation — this One Twelfth Scale Vintage Record Player Console, Mid-Century Modern, Dollhouse Tested on 8+ FDM printers. Download and print immediately. **What's Included:** - STL File - 3MF File - OBJ File - Print…
Hi friends, I do not know about you but I like gadgets. And the more it's useless, the more I like it. There are many ways to test the safety of a freezer but I decided to make my gadget for that. It is a kit of 2 parts: a tank and a…
Hi friends, I do not know about you but I like gadgets. And the more it's useless, the more I like it. There are many ways to test the safety of a freezer but I decided to make my gadget for that. It is a kit of 2 parts: a tank and a…
3d printed bottle: glue the top to the bottom of the water station.Carve a little hole in the side of the bottle with a knife. It should be as high as the water station is and a small hole in the closure. the refill the bottle with water…
🇳🇱 Welkom in Nederland! Along with our friends at FormFutura , MiniWorld3D has created yet another iteration of our " Dutch Architecture ", this time Dutchier than ever! We keep pushing our own limits, and we did an "in-house remix" by…
