Counting matching models…
Toolgrid Board Note - MaxTheSpy has updated his model with additional improvements and better explanations of the settings than what I have. You may find it easier to use:…
was too poor to afford the toolgrid boards, so I made them myself. they snap into each other pretty securely
OpenGridMount Customizable Base Plates This OpenSCAD project allows you to create custom grid-mount base plates sized for your specific workshop organization needs. Unlike some commercially available boards, OpenGridMount base plates…
🇮🇸 Velkomin til Íslands! Welcome to Iceland! Hallgrímskirkja is a Lutheran church situated in the center of Reykjavík, Iceland . It is one of the best-known landmarks and is visible throughout the city. State Architect Guðjón Samúelsson's…
🇷🇸 Добродошли у Србију Welcome to Serbia! This model was designed by Dany Sánchez . The Church of Saint Sava is a Serbian Orthodox church located in Belgrade. It is one of the largest Orthodox churches and even ranks among the largest…
The three models are for the Toolgrid system. Ones I found online were not at the tolerance I preferred so I made these. They are .254mm smaller than the actual size keeping it nice and tight to the socket but not tight enough you can't…
OpenGridMount Walls & Corners OpenGridMount walls and corners are designed to keep loose items from sliding around inside your toolbox drawers. Dedicated organizers work well for frequently used tools, but not every item needs—or has—a…
An unnamed and long forgotten pilgrim. The model needs very few supports, preferably tree (auto). The complete set (3 models) is here: Mysterious Faceless Figurines - 3 Models It would be great f you can post a make! Happy printing :)
SpoolGrid is a modular drawer organizer designed to give a second life to empty Prusament spools . Instead of throwing away or storing empty filament spools, SpoolGrid transforms the spool into a compact circular storage system. The…
The Extension holders are various sizes for the front and back end of the extensions and other tools. Tried to design a smaller footprint so you could gain space for more tools. They will also work for the back side of the socket wrench…
OpenGridMount Socket Adapters OpenGridMount socket adapters are designed to hold individual sockets securely on compatible grid-based toolbox organization systems. Instead of using a fixed socket rail or tray, each adapter mounts…
Print at 15% and at most .3 layer height.
Works with the toolgrid system to hold all of your hex bits.
The cam is for keeping tools up against the walls and/or corners created by MaxTheSpy. there are two files for use, one at the standard 1" size and another at 1.75" for larger tools. Linked below is the walls and corners MaxTheSpy makes…
I made this after using a few other people had made. They always seemed to be a little snug on the square drive of the ½" ratchet so i made one that is slightly bigger internally. Works with toolgrid and can be paired with either the…
Luce : Catholic Pilgrim: 2025 Jubilee Based on Drawing and Design by Simone Legno.
Inspired by the pliers holders from MaxTheSpy https://thangs.com/designer/MaxTheSpy/3d-model/ToolGrid%20-%20Small%20Pliers%20Holder-1079181 I despise supports, so I made this to print without supports. I use 1/8 x ½" roll pins in the…
Pilgrim Duck 4 Color AMS, MMU, or ACE Pro PLA Basic Black PLA Basic White PLA Basic Yellow PLA Basic Orange Bambu Labs .3mf Included Commercial License Available For commercial use: https://www.patreon.com/c/atro3dprints/membership…
A newer version with embedded labels is now available: The addition of a magnet in these wrench holders keeps the wrench in place better when used in a rolling tool cabinet. I used 12mm x 2.5mm magnets. They hold pretty well. It could be…
OpenGridMount Wrench Adapters OpenGridMount wrench adapters provide several ways to organize hand tools vertically on compatible grid-based toolbox organization systems. The included holders are useful for arranging combination wrenches,…
Pretty straight to the point: this plate is skeletonized to save filament. Each plate uses about 75 g of filament. It prints faster with a 0.6 mm nozzle if you have it, but works just fine with other sizes. Use max layer height. Print…
I made this Kaalgrontiid back in 2019, to try out my resin 3D printer. It is a dragon from The Elder Scrolls Online Elsweyr chapter.
OpenGridMount Tool Tip & Ratchet Adapters OpenGridMount tool tip and ratchet adapters are designed to help organize tools that do not always fit neatly into standard holders. These adapters provide simple mounting points for ratchet ends,…
Kugelgriffe mit Durchmesser 20 mm und Gewinde M5, M6 & M8, Durchmesser 25mm M6 & M8 und Durchmesser 30 mm und Gewinde M8 & M10. Gedruckt mit PLA, 2 perimeter und 15% infill. Ball handles with diameter 20 mm and thread M5, M6 & M8,…
The original Pilgrim Hat for the Thanksgiving Weasel. The Thanksgiving Weasel is the self-proclaimed mascot of Thanksgiving. https://www.facebook.com/thanksgivingweasel https://www.instagram.com/thanksgiving.weasel Includes "Stay-On" hat…
Rotating medicine/pill bottle rack sized to accommodate standard sized Walgreen's containers. As with the original model this is based on, it includes a rotating Lazy-Susan style base with a forceps storage slot in knob at the top. Base…
extension holder for toolgrid by maxspy
These print flat for minimal color changes - the colored label is done in only 2 layers. An embedded magnet can be installed in the back side after printing. No supports required. If you prefer the labels in front of the wrench, there is…
Will fit all of the Milwaukee Insider Electric Ratchet bits that come with the tool. Designed for the OlsaTools Tool Grid Platform. Printed in PLA+ with 0.2mm layer height, 15% infill, supports enabled, and 4 wall loops.
Updated December 2025 - Added OpenSCAD generator to make custom sizes Use walls and corners to hold irregular shaped items in place on Toolgrid boards. The tee is great when multiple items are close together. Holes are provided in the…
Change filaments at your preferred layers to get the color scheme you want. Make and sell all you want!
I looked but could not find a pill bottle rack that fits the small prescription bottles I get from Walgreens (~32mm OD bottles). I designed this rack for 5 bottles to screw in on the bottom (cap has threads) and 5 bottles to sit into…
I made this holder for my M12 batteries to adapt to toolgrid. Holds a single battery.
MetalGreymon Digimon Creature Model
Fastprint at 0,3 good to print detailed at 0,15 HAVE FUN use cura 75max to get supportfree printing as shown in the image
This holder works with the pittsburgh pro universal sockets that come in 3/8" and ½" drive. It is meant to screw down with the tool grid system.
I printed it in PLA at 25% infill and standing vertically.
These are deep socket trays to work with the toolgrid system and CASOMAN deep sockets. I am not sure if it will fit other ¼" drive deep sockets but you can print and try. I have given the files for both SAE and Metric. SAE I could fit on…
Möbelgriff für Schranktüren und Schubkästen. Auf der Rückseite befindet sich eine Bohrung, die passend für ein M3 heatinsert ist. Außerdem gibt es eine Variante für den SLA-Druck, die bereits über ein M3 Gewinde verfügt. Wir haben den…
Printed without support Designed to be mounted with wood screws from the back. CAD Model…
This is a remix of the Pilgrim miniature by user "Matej Čižik"; kudos to him for his good work. I wanted to print his original files but unfortunately: I needed the sculpt to be max 43 mm including the base They seemed made for SLA and I…
Kugelgriffe mit Durchmesser 20, 25 und 30 mm und amerikanischen UNC Gewinde No 10-24, 1/4" x 20, 5/16" x 18 and 3/8" x 16 Gedruckt mit PLA, 2 perimeter und 15% infill. Ball handles with diameter 20, 25 and 30 mm and UNC thread No 10-24,…
Es wurde eine Bodenplatte und an den Kanten Rundungen eingefügt um den Griff zu verstärken.
Griff für Schränke, Schubladen und andere Möbelstücke im einfachen zeitlosen Design. Die Griffe habe ich in verschiedenen Längen (Lochabstand der Gewinde!) hochgeladen, jeweils mit M4 Gewinde zur Befestigung. Die Griffe selbst haben ein…
It looks cool when printed with fuzzy skin.
I designed this to lay flat in my drawer for my larger wrenches. It could have a different use for sure.
Bohrschablone für Möbelgriffe mit Abstand 64,96,128,160,192,224 und 256mm und Senkrechten Abstand bis 20cm.
A simple token for your backpack when you travel the Camino De Santiago.
Customizable hex bit holder with as many rows and columns as you need. The optional mounting holes are auto spaced for a toolgrid board. Can be set for 1/4" (most common), 5/16" (impact driver) and 3mm (precision) bits.
The original bean hopper for my Fiorenzato AllGround Sense was a tad to big for my taste. This is an alternative hopper. I did use some dense foam (2mm) as a seal, so it doesn't rattle and is as airtight as the original one.
I made this specifically for Mr.Pen macinest rulers but it could work for something else im sure.
Single bit holder for the toolgrid system. Peg is optional, but is a snug fit in the bit holder. Designed to be able to place several next to eachother with no spacing.
Diesen Schraubgriff habe ich verwendet, als ich meine Scheppach HMC2600 aufgerüstet habe, wie auf dem Foto zu sehen ist. Ich habe Größen in M6, M8, M10 und M12 erstellt. Der Griff ist sehr stabil und durch die Rändelung auch griffig. Er…
Pill bottle stand for four Walgreens bottle The caps fit snugly in the base the first couple of time you use them, Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Filament: inland PLA Category: Organization
Here is my Thanksgiving turkey with a Pilgrim hat model. Usually, I make my models to need little to no support, but on this one I'm embracing the support. I used tree supports at 60 degree overhang and it turned out well. My original…
SkullGreymon Digimon Creature Model
Replacement foot for the rubber Part of Robens Pilgrim. Probably also fitting for Robens Pathfinder and Robens Observer. Printed in PETG on mini+. Long term testing still needs to be done. It would probably be nice to print it with flex…
Milwaukee battery holder
Druck mit PLA, der Vintage look kommt natuerlich nur zur Geltung wenn man die Griffe lackiert. Mann kann die Griffe sowohl von vorne mit vier Schauben, als auch von Hinten mittig mit einer Schaube montieren, so daß man einfache Knöpfe…
This is a Foam Nade that utilizes 20mm airsoft shells filled with green gas. The most effective ammunition for this design are .50 cal foam balls. No hardware aside from the ammo and green gas shell is required for this design. The Nade…
einfach zu drucken ich verwendete 0.28 mit einer 0.6 Düse
This is a replacement cocking arm handle for a Walther LGR Air Rifle used for 10 meter competition shooting, they are no longer manufactured. Print instructions Resolution - 0.2 Infill - 20% Supports - From Bed Walther LGR Description The…
The Tall hat looks good printed with Fuzzy Skin.
Modified original panel to side panels, this suitable for drawers measuring 530x400 mm (lenght x width) "BaseToolgrid_ParteLateral" It is 73,8mm width. "BaseToolgrid_ParteSuperior" It is 87,8mm width
Möbelgriff und Bohrschablone Es werden Einpressmuttern M4 benötigt. Lochmaß 5,6mm https://www.amazon.de/dp/B07YSV66Y5?psc=1&ref=ppx_yo2ov_dt_b_product_details
From the animated series Scott Pilgrim Takes Off is a stencil. It's the first scene when they first met. Post makes of this stencil.
Vessel 6-in1 Ballgrip Driver Gridfinity
A stylized low poly 3D model of a Thanksgiving pilgrim hat, designed with clean polygonal geometry and faceted details. The model features the classic wide brim, tall crown, and buckle accent, combining historical charm with a minimalist…
a small plier holder with adjustable arm for the Toolgrid System.
a large plier holder with adjustable arm for the Toolgrid System.
mittelgroßer Drache auf Ball Category: Art
Ikea designed new wooden storage box that is perfect for filament spool. A great solution for hiding spools in the living room environment. Wifes likes. Drill the 6mm hole at the 45mm height from the bottom. Put an insert inside and align…
TPU parts for original Rekon 7 made to fit DJI O3 Air unit. Not exactly the cleanest job, but it fits fine and prints fine (GPS Mount requires support). Also the GPS module is 1 cm further away from drone body.
Schell Handgriff für einen Wasserhahn. Die Aufnahme hat einen Innendurchmesser von ca. 8mm und verfügt über 20 Zähne. Die Aufnahme ist eher eng gewählt und musste in meinem Fall aufgepresst werden. Falls es zu eng ist, kannst du es im…
I wanted a modular storage system for my 3D printer. The wall plates can be printed in 2 orientations without support I included STEP files if you need to modify it Everything is printed in PLA
a mini pilgrim hat to put anywhere in your house
AI generated pilgrims pilgrims pilgrims. because my wife said so. there's too much Christmas and Halloween stuff we need thanksgiving stuff. currently printing when completed will add pictures. if anyone can make the models detail pop…
Dress up your giant snowman for Thanksgiving with this traditional pilgrim hat with buckle. I printed my hat in black and chocolate Hatchbox PETG with a gold silk PLA buckle. You can get away without the layer change and print the hat…
VESSEL Ballgrip Rechargeable Screwdriver Cordless No.220USB-1U and several bits Gridfinity base.
I created these because the normal extension holders take up a ton of room and having things vertical save even more space. The 1/4 in vertical will need to be printed w/ a .4mm nozzle to allow smaller details to print so that it is…
1:400 model of the Belgrade gate in Novi Sad part of the Petrovaradin fortress. I made this model in my Architecture representation class and remade it for the 3d printing. The model was siting on my shelf for a while so it lost a couple…
A remix of a great holder for the Vessel Ball Grip driver handle and JIS bits that it comes with, and couple of additional holders for bits. Uses 1x5 grid. 3mf file has a two-color set up for visual indication of missing components.
The perfect center decoration for your thanskgiving dinner. The pilgrim hat is composed of two pieces: the brim of the hat is used as a spill tray, and the top portion of the hat is the planter.
Muschelgriff runde Form für Schubladen oder Laden oder was auch immer. Griffbreite 50, 60, 70, 80 und 90 mm. Die Breiten 50mm und 60mm haben Löcher für 3mm Schrauben, die Breiten 70, 80 und 90 mm haben Löcher für 4mm Schrauben. Für…
Inspired by https://www.thingiverse.com/thing:4597244 , this is a rehash to better fit Walgreens medicine / pill bottles for part / screw storage on a pegboard mount. The bottles are better spaced to allow easier access to each individual…
I like the top hat and leprechaun hat models for other holidays but pilgrim hats have such a distinct shape so I created one. Printing I printed at .2 layer height with 8% gyroid infil. The tall part of the hat is hollow and tapers to a…
My local Kindergarden got a new Kitchen for the kids. To make it a little bit more interesting and colorful I made these Honeycomb Handles with an imprint on it. For the top handles I put a bee on top of it, which I found here and used…
OpenGridMount Adjustable Cams – Small, Medium & Large The OpenGridMount adjustable cams are designed to secure tools, cases, boxes and other irregularly shaped items that do not naturally align with the ToolGrid mounting points. Each cam…
a pilgrim hat to put whatever you want in it
Diese Knöpfe sind eine Abzeichnung der Kugelgriffe nach TGL 2950. Sie wurden in DDR-Zeiten an verschiedensten Maschinen und Fahrzeugen als Bedienelement verbaut. Die Knöpfe sind laut Norm in A, B und C eingeteilt. manchmal wurde auch…
I looked for a good use for these small transparent pill bottles from Walgreens drug store. They are great for storing small parts, SD cards, thumb drives, pills, vitamins, screws, or any other small item that you want to organize. It is…
Printable handles for creating a skipping / jumping rope. Every part is needed printed 2 times. Additionally you will need 2x Bearing 2x m2 brass nut 2x short m2 screw (I have cutted mine with a side cutter) 1x rope, max. 5mm diameter.…
UPDATED Design v2 Improved shape and surface texture. This is a replacement cocking arm handle for a Walther LGR Air Rifle. I have not been able to buy this as a spare part as they are no longer manufactured. Walther LGR Description The…
Intention was a Scott Pilgrim reference, but I'm now realising this can be used for about anything. Roblox Player Points? This is my first model I've ever published so excuse the sloppy designing. Scale to your hearts content! It's at…
Celebrate Thanksgiving with this adorable Pilgrim Snoopy 3D print! Featuring Snoopy dressed in a traditional pilgrim hat and outfit with classic black, white, and brown details, this charming Peanuts-inspired collectible is perfect for…
Alle Farben haben eine eigene Datei die im Slicer zusammen übereinander gesetzt werden. Die Druckdatei ist von einem Bambulab P1P.
I made this for 7/8" grinder discs. It would hold stacked cut off discs, grinder stone or a flap wheel disc.
This is an bizarre looking creature from the Eberron setting. He was fun to make but another time consuming one and makes me wish I had a faster computer. 👍 Don't forget to Like and Collect this, so you can easily find it later! ⭐ If you…
Muschelgriff ovale Form für Schubladen oder Laden oder was auch immer. Griffbreite 50, 60, 70, 80 und 90 mm. Die Breiten 50mm und 60mm haben Löcher für 3mm Schrauben, die Breiten 70, 80 und 90 mm haben Löcher für 4mm Schrauben. Für…
Football Klub Crvena Zvezda Belgrade
