Counting matching models…
About Voron V0 Auxiliary Fan Ducts These are auxiliary fan mounts for the v0, which you can use if you need extra cooling on your Speedbenchy journey. The ducts can be easily installed after the Printer has already been fully assembled,…
Cover your fan in style with the Auxiliary Fan Cover for Snapmaker U1! Featuring a Snapmaker logo, and hexagons (the bestagons).
This tool will ensure tight racks every time with all balls touching. Included are a 9-ball, 10-ball, Combo 9/10-ball, 8-ball, and a small 8-ball rack. The small 8-ball rack is for printers with a standard (220mm) bed size that cannot…
Want to access even more models not found here in Prusa Printers? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my…
Update: Added step file to make remixes easier. Please do no sell derivatives of my design. It started free, it should remain free. Update 2: Added the caveat that the duct is quieter on my machine . Its possible that my stock duct,…
About This adds a 120mm auxiliary cooling fan to Voron Trident 3D printers. This is heavily inspired by the VzBots RSCS cooling fans. The cooling is mainly targeted at the center of the bed (around 150-200mm wide air stream). No…
Redesigned from scratch to have a more evenly spread airflow and a way to print it without any support.
*Use the excact .3mf file has been uploaded to print this case to obtain a perfect air duct surface. (the support has been set, Please do not change the sliced file) *Printed in ABS (or other materials with good heat resistance, Do not…
Available with or without the tree limb, in order to mount to your own base or other miniature via Meshmixer/Blender/3D Builder, etc. Shrink him down and put him on someone's shoulder, I don't know! Category: Toy & Game Accessories
A fan cover/grill with various patterns to prevent filament scraps from being drawn into the fan. ⚠ It is recommended to use PETG or a material that can withstand higher temperatures. BENEFITS: Protect your auxiliary fan from filament…
Remixed from the No Support design of Yodog I acquire 2 New K1 Max, and it seems that the Side Fan has been Updated on the Latest Models of 2024. So, the prior design doesn't fit the Updated Side Fan air exhaust part, I remixed it to fit…
Small billiard table, scale 1:10, functional, for balls with a diameter of 8-9 mm, the balls roll into storage. Printing a billiard plate checks the evenness of the printing plate. Created completely in Prusaslicer. Update! Added stl…
Print with PLA Support and Brim not necessary (if then use tree support) 15% Infill (for better material stability use gyroid infill) To look better use the Arachne wall generator Thanks for downloading in advance and please don't forget…
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 or support me on Printables Clubs! Patrons have…
You will need 12032 fan (basically 4 pin, but also you can use 2pin with config edit), some nuts and screws to attach fan. I mounted the fan with a double sided tape. The only tricky part is to mount upper part. It must be about 1.5 mm…
This is a cue shaper that uses sand paper strips. This is a "Dime & Nickel Radius". Just cut strips of sandpaper and insert into the tool. Use the 2 sides (print 2 of the sides) to hold the tool together. Printed in PLA with supports…
A k1 auxiliary fan (side fan) sound reducer, and guard the fan from trash admit.
Compact and portable, it includes scaled-down cue. You'll need any 6mm balls.
Got allways sun on the screen. With this cover it is a lot better and i can see the navigation system without moving around. THE MOBILEPHONE HOLDER FROM FIAT IS NOT WORKING ANYMORE WITH THIS COVER Print in ABS / ASA / PETG/ PC or FlexFill…
Want to access even more models not found here in Prusa Printers? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my…
BOM 8× M3×14 BHCS 4× M3×8 BHCS 8× M3 heat inserts 4× 3×6 Magnet Material ABS, or ASA for best results Print Settings 0.2mm layer height, 2-3 perimeters, ~25% infill are more than enough.
My Flashforge Adventurer 5mPRO had the standoffs and a brim on a right wall. So i thought it was for a second aux fan. But the original duct did not fit. And i modeled my own. I used the top part from the trident model extended it, and…
After enclosing my AD5M, I wanted to add a fan for various reasons which we all have. Anyway, I found a fan duct I liked because it fit snuggly in the fan I purchased specifically for the AD5M. The wiring was correct and everything fit…
For perfect first break. Due to the angle, the balls can be perfectly placed against each other. Print the Part 3 times and glue it together. designed for a ball diameter of 57.2mm. If you need a different ball diameter you can scale the…
Customizable and scalable Billiards, Pool, Eight (8) Ball Trophy. 2 Versions available including a blank trophy for customizing the text on the front. See below on how to easily add your own inscription. This is the model we use for our…
This holder alows you to mount the X1 Auxiliary Part Cooling Fan on the P1P. The P1P version of the Auxiliary Part Cooling Fan was not available in the bambu lab shop when i purchased my P1P. So i bought the X1 version of the fan. I based…
My pet bearded dragon died about 5 weeks ago and wanted to make a mini to memorialize her. I don't really have any personal connection to Dia De Los Muertos but it's a holiday celebrating lost loved ones so I don't think there was any…
Circle-drawing auxiliary tool (Rotio Compass)
Allows for a single place/tool to hold your billiards cue joint protectors while not in use.
As I often hit the fan and because of the dust that accumulates, I've decided to realize some Covers for the Auxiliary Fan . If you like it, take a look at my other 3D printer accessory creations . As you can see from the photos, there…
"Breeze" is a simple auxiliary fan system for the Voron 2.4 printer. You can mount up to four 5015 fans on the gantry (two on the left and two on the right). This allows to increase part cooling capabilities, which is useful especially if…
This model is a magnetic chalk clip designed for Triangle chalk, but any chalk of the same dimension should work (as they are all roughly the same size). There is a magnet embedded in the chalk holder and the chalk clip so that the clip…
Adjust Scale for your carpet thickness and bucket size. For my thin carpet and Lowes bucket 91% scale was prefect.
A pool table for all of your pool playing in miniature needs! It has the normal amount of billiard balls as a normal table, as well as a cue ball. Something that I may have to add later is one of those things that holds the balls on the…
Liara from Mass Effect 3. Model is repaired and ready for printing Print Settings Printer Brand: Formlabs Printer: Formlabs Form 2 Rafts: No Supports: Yes Resolution: 0.05mm Infill: 100% Post-Printing Wash in Form Wash Cure in Form Cure…
Easy to print in 2 parts. I printed in PLA using Prusament Galaxy Black & Hatchbox White. After printing cut the tabs off the white parts and press them into the black ball. Make sure to line up the center dots correctly as they are…
Liar's Dice is a very simple bluffing game that requires just 5 dice and a shaker cup per player. This version includes the cups and space you need for 4 player's worth of dice*. Rules / Details This set was my attempt at making a simple…
Simple bust of Liara from Mass Effect Original file from game source files, remeshed and sculpted to fix all of the low poly goodness that comes with video games :) Category: Toy & Game Accessories
As it was too expansive and not able to deliver to france, I create my own billards longshot bridge. Of course if you are living in the country where it is sold, please buy the real version. This is a little bit customizable, meaning the…
I moved to TAOM chalk and needed a belt clip for it. This will hold a TAOM v10 (haven't tested with other roud TAOM chalk, but I imagine it would work fine). Printed both parts out of TPU. .2mm speed profile @15% infill on a MK4 You will…
Eine Aufbauhilfe für das 9 Ball - Spiel. Durch die Schräge lassen sich die Kugeln perfekt aneinanderlegen. Gedruckt mit 2 Perimetern, 0.3 Layerhöhe, 10% Infill, 0.4er Düse A setup aid for the 9 ball - game. Due to the angle, the balls can…
The racks (apart from the 9 ball rack) all need a larger bed (such as the Prusa XL). I am currently using the 9 ball rack for a couple years now. I designed all of them to very high tolerances (higher than the ones they sell online) and…
Miniature Billiard, Pool table. For use as prop, miniature etc.
This tool is a auxiliary tool for grinding drills with a proxxon TSG 250/E plate grinding machine. The tool is inserted into the rail so that the angle matches the drill. For easier printing, the template is divided into two parts
Воздуховод для бокового вентилятора Qidi Q1 Pro. Я случайно сломал лопасти на родном вентиляторе и мне не удалось снять родной воздуховод. Я спроектировал свою модель и готов поделиться ей с вами. Я так-же загрузил файл для SolidWorks.…
shift knob features ralliart logo on the bottom. I lost the original sleeve. so I made a replacement. Uploaded two type of screw fittings. loose one and tight one. If you choose the tight one . You might need to use Hairdryer to loosen…
A 9-ball billiards rack for 57mm balls. There are two versions, one that prints as a single piece and one that is sliced into multiple pieces for smaller print beds. For the multipiece version, supports are needed. Support My Work Should…
Billiard chalk holder size (23 x 23 mm) for belt / pocket. Neodymium magnets - 4pcs 8 x 3 mm.
This build is for a chalk holder for snooker/pool. I've looked at a few online but couldn't find one that suited my needs so, in fusion I designed this simple clip with a removable chalk holder. the clip and the chalk holder will take a…
Remixed from the great design of Gonzos_Gizmos I strechted it to 74.5mm to be the exact height as the stock auxiliary fan position, also made a side cut for an accurate stock bracket camera clearance.
It's a custom design to fit the Taom V10 cue chalk. Most likely it works with the rest of round Taom chalks. Probably even the Predator Pyro (untested). It has a magnetic holder (a disc magnet was buried inside during the printing process…
This is an electrical connector to allow a non Anker Battery to be used on the F3800 battery unit. NOTE: This is NOT UL Listed, Not Approved by Anker! The reason that I created this model is because I have seen others successfully connect…
Hello! Here is a remix of the Voron Trident Auxiliary Fan made by @JacobG3231_143196 , making it compatible with the RatRig VCore 4. Please refer to his model for the BOM and assembly instructions. The extra parts required for this remix…
Since i wanted to print a special part on my XL, and FAILED multiple times. I experimented, and it seemed that this was caused from missing part cooling. Ive been designing and modifing this Side covers (Pre- prepared for Enclosure), with…
R2D2 es un personaje muy conocido y querido por muchos. Este droide astromecánico ha aparecido en numerosas películas y series de televisión. Su diseño único y su personalidad lo han convertido en un icono de la cultura popular.
Dudo / Perudo / Liar's dice 6 person "strategic" dice game - compact storage and travel version. Dudo (Spanish for I doubt), also known as Cacho, Pico, Perudo, Liar's Dice, Cachito or Dadinho is a popular dice game played with roots in…
A 9-ball billiards rack for 47mm balls. There are two versions, one that prints as a single piece and one that is sliced into multiple pieces for smaller print beds. For the multipiece version, supports are needed. Support My Work Should…
An unofficial model of Shovel, quasit familiar from Baldur's Gate 3. Shovel comes in two poses, a classic Shovel and Shovel holding her Friend-Finder. With and without base. By default the model is scaled to fit with other 28-32mm…
Deflettore progettato per deviare il flusso della ventola ausiliaria verso l’alto con un’inclinazione di circa 90°, favorendo un movimento circolare dell’aria nella camera di stampa. In questo modo aiuta a redistribuire più uniformemente…
Auxiliary products for Airbrush, suitable for Vallejo.. Positions for 1x200ml, 5x 60ml, 2x32ml, 1x17ml bottles, 2x hole for cotton buds or tampons and 3x positions for brushes, scalpel, etc. The vents are only decorative, they have no…
Bambulab X1C Auxiliary Fan Cover Hex with logo
un modelo sencillo de trofeo de 8-ball, recomiendo pintarlo a mano
Intended to be summoned by the Necromancer Trio as part of the Iron Ramparts set. If your party can't handle too many familiars, maybe just the Raven/Wolf. If you want the party to deal with a lot at once you could try all four and the…
tip shaper for cues, makes it easier to get the desired shape. cut paper to size and insert it into the holder File consists of 100mm, 50mm and 25mm in length
This stearing wheel knob is designed for stearing whell with outher diameter 365mm and 25mm diam in cut. The clamp is printable as a one piece, situated on plate according picture. The ball with pivot is printable on place also. Gap is…
3 types of Marcille's familiar. Use the back of a toothpick to add eyes.
A billiards trophy | pool trophy This model is the one to make any of your billiards competitions look much nicer. With the custom design, it will look nice with and without the top ball, as well as with and without the text labels on the…
Auxiliary cooling fans for V0! Keeps a nice thin sheet of air flowing just below the nozzle. Can be used to heat up chamber when bed is high (door and tophat closed), or to cool down the bed (door and tophat open). With the arctic fans…
Glue or weld the lower part with a hot air gun Printed with TPU Shore95A
The original upload only contained a single .3mf file. I opened it with PrusaSlicer and exported each of the 3 components as individual .stl files. No other modifications were made. Duct should supposedly be printed in the orientation…
A 3-ball billiards rack for 57mm balls. Support My Work Should you want to, you can support me on Patreon . If you are unable to become a patron, remember that likes are free and make designers happy! :-) On Patreon, it is also possible…
Billiard Ball No. 8 as 45 Record Adapters
I noticed that when cable chain is added to the print head, it sags a bit and rubs the wire that powers the auxiliary fan. Even though I taped it down to have the lowest possible profile, the chain was still hitting it, so I decided to…
Auxiliary spool pin for Singer sewing machines
The auxiliary fan of the Bambu Lab X1 3D printer is glued to the side wall. On arrival of the printer, the fan was loose. So, I decided to design a fan holder to be screwed to the bar where the LED is attached. When installed, the fan…
This is a 10-ball billiards rack for 57mm balls. There are two versions: one that prints as a single piece and one that is sliced into multiple pieces for smaller print beds. For the multipiece version, supports are needed. Support My…
Note, see the remix of this model by Mike Wil for 15mm thick filters rather than 14mm filters, and with even more clearance from the z-blocks than the V3 version if required. V3 - A user reported that the V2 clashed slightly with the Z…
120mm auxiliary part cooling fan designed for a ZeroG Mercury One.1 370 (Non-Hydra) that may also work for Ender 5 and 5+'s. The ducts have optional heat set inserts for strength. You need to close the holes if you don't use the inserts.…
Originally I designed it to match a bar table and it would have had legs, but time was short so I didn't do the legs and its actually better that way. The ones I made were given to my pool team and had the team name & the season on it as…
Este modelo 3D de marcos familiares no solo embellece las fotos, sino que también ofrece una manera creativa y personalizada de conservar y exhibir los momentos más preciados. Cada marco ha sido cuidadosamente creado para resaltar los…
Auxiliary Fan Duct using 12032 fan, Same as the k1 / K1Max Remix From https://www.printables.com/model/692486-voron-v02-auxilliary-fan-ducts-12032 SV05 Auxiliary Fan Duct using 12032 https://www.thingiverse.com/thing:6502244 SV05…
This is a billiard triangle consisting of 6 parts.
Didn't find any fan cover for K2 Pro on the internet when I made this. Print with filament that can withstand some temperature.
Pool billiard ball coaster of all 16 balls 100mm Diameter
here is my take for an auxiliary fan for my voron 0.2. i had trouble with printing PLA in the enclosure, because of insufficient cooling for the parts. the mini stealthburner couldn't provide enough partcooling for PLA. i designed the…
Printed with Esun ABS+ (PLA is not recommended, it's close to the hot bed) and mounted with 2 screws M3x14mm.
I've deleted my previous designs of the IXO Auxiliary Head Wall-Mount and uploaded a remake of them. if required, I can add further combinations like a single mount also. 3 piece holder 4 piece holder same design base for all of them…
Vivienda unifamiliar (Proyecto y obra de 2006) a escala 1:100. Los ficheros STL están a esa escala, aunque yo los he reducido un 10% al imprimir en mi Prusa I3 Hephestos. Tiene algunos fallos de concepto, fruto de la inexperiencia, pero…
Billiard table modeled in Autodesk Maya and 3D printed with support of supports, it can be printed in the desired size
3-Piece magnetic chalk holder for billiards. Clip fits over waistband or a pocket. Print Settings Printer Brand: Monoprice Printer: Maker Select Plus Rafts: No Supports: No Resolution: .3mm Infill: 25% Filament: BamTack PLA (or ABS) Any…
Search Creality Auxiliary Fan on Amazon if you don't have one and you want one. with the duct, it's the best option for Enders, since the fan speed is adjustable from the fan. Just not with software, unless you are good at that stuff.
I added a custom headlight to one of my ATV’s and I wanted it to have a fuse. I plan on adding some other thing's so I made an auxiliary 3 circuit fuse box that uses standard size atc fuses and blue female spade connectors. Crimp on the…
i used https://www.printables.com/model/553657-siboor-voron-v0-blower-duct to be able to use this in combination with my Rainbow Matchsticks 0.2mm layer height, 3 perimeters, ~25% infill.
With this tool you can cut cardboard, paper or similar material straight. Slots are placed on the tool at a distance of 5 15 25 35 45 mm so you can easily adjust the desired cut on your material Printed on Prusa MK4 0.2 layer PLA 40 %…
A 10-ball billiards rack for 47mm balls. There are two versions, one that prints as a single piece and one that is sliced into multiple pieces for smaller print beds. For the multipiece version, supports are needed. Support My Work Should…
Lengthened it 8mm so it sits lower, for use with a volcano block or a volcano adapter.
Hello, There are two designs included here. One design is only meant to hold the cone of chalk typically applied to the hands when playing pool/billiards. There is 1 mounting hole for a number 10 screw meant to be screwed into a stud in…
A tool for correctly placing the opponent's ball in five pin billiard. It was primarily made to save our billiards club's money, but it also improves upon commercial options (we had a particular issue with the diamond pointer snapping at…
