Counting matching models…
16Nov2024 - Uploaded V2 model which has a shorter front wall and deeper cut to the rear with a larger radii up to the top. This was created to provide a splash guard to the PETLIBRO DockStream pet water fountain in order to prevent water…
Riser stand for PetLibro Automatic pet feeder Made this for my pet cats automatic feeder after talking to vet, elevating to 5 inch feeding level will help in eating/digestion. Material: PLA Infill Pattern: Gyroid Infill : 5% Additional…
This model was inspired by ThoughtFactory over on thingiverse doing this with a feeder by PETKIT. Also refer this for assembly and demo video: https://www.thingiverse.com/thing:6206548/files Goal This whole setup is done with the purpose…
Ho letto fino a QUA - Segnalibro/Bookmark Extremely funny bookmark based on an Italian wordplay, lol. Goose, duck who knows the difference. In Italian is even worse as we have anatra, oca and papera. Have a nice reading. Printing: Printed…
Robert Libro Sugar Bowl is available with two different wall thicknesses. This is the version with the thinner walls. Support (Tree) Fuzzy skin
My cats tend to try to pull the bowl of the Petlibro waterfountain, which result in a wet floor. This design clamps it against a wall or furniture. After 3D scanning the bowl itself i made it a negative resulting in 2 clamps to hold the…
Bookend for you Sherlock Holmes book collection.
This is a replacement dispensing wheel for the Petlibro One RFID. It reduces the portion size to around half of the normal amount (probably a little bit less). I printed mine out of PLA but you could probably do whatever you want. The…
Separadore para libros de Clon Trooper
This is a very niche problem…but I purchased this feeder to help control my cat's diet because they were becoming overweight. One of them (Yzma) figured out how to operate the “feed” button on the front display, thus dispensing herself a…
Height: 178mm Length/Width: 184.7mm Designed for FDM 3D Printing For best results, print funnel top and lid upside down. .18mm layer height 4 wall layers 4 top and bottom skin layers Various options for infill Minimal supports needed
SUJETALIBROS JUSTICIA - BALANZA - MAZO Diseño realizado para CONCURSO PRINTABLES - SUJETALIBROS Inspirado en la balanza de la justicia y el mazo de los jueces MEDIDAS: ALTO: 15cm / 150mm ANCHO: 11cm / 110mm PROFUNDIDAD: 7cm / 70mm He…
To print one side or the other, mirror on the laminator. I printed at 0.25 layer height.
soporte multi función divertido y minimalista.
Punto de libro árbol de la vida. Hay dos modelos. Uno con fondo base y otro sin fondo base. Bookmark tree. Two models for print. The first model have a base and the other one don't have a base.
Sujeta libros con motivo de Karateka. Realizado en PLA. Se puede imprimir de una sola con soportes para el codo del muñeco, o en dos veces, soporte y muñeco por separado. (Lleva hendiduras para anclar los pies). En el caso de imprimir por…
My cat was drinking close to the back edge of the water fountain then splashing lots of water on the floor. This promotes drinking where the tongue is closer to the front of the fountain, and if they do splash should reroute the splashes…
Separador de libro Estaría encantado que subieran sus fotos con el separador y sus libros favoritos :) Para el cambio de color utilicé el laminador ULTIMAKER CURA, y tomando como guía el video del canal de YouTube (No es de mi propiedad)…
Convenientes soportes para algunas zonas.
This is a remix of the Petlibro feeder bowl. I made it into a slow feeder for a feline Queen we have on a diet. And just to add some humor to it I used FDA Approved material so it is totally food safe. Queen Stella started off her weight…
I added some stickable non-slip pads to the bottom and they work great. They are called GorillaPads on Amazon, but there are other options that are less expensive. Plus, they can be cut, which makes them more economical.
You are welcome to remix. Print Settings PETG 3 walls | 3 top and bottom layer. No infill ( walls arent wide enough No support - printed standing up on the bed.
This model aims to replace the tank base silicon “portioner” for the Petlibro Granary (PLAF005) with a smaller opening. This reduces the amount of kibbles dispensed which is especially useful when using smaller kibbles. Files included:…
Kept having issues with my cats' water fountain spilling water all over the floor. Unsure if it's leaking or my cats are just jerks. Either way, I like the fountain otherwise so didn't want to replace it. I designed this tray to collect…
Sujeta libros para estanteria
English: This One-Hand Book Holder is a simple yet effective tool for comfortable reading. It allows you to keep your book open with one hand, making it ideal for multitasking or long reading sessions. Sizes available: Regular, Large, and…
Custom triple-pet bowl for use on a Petlibro (or similar, maybe) automatic pet feeder. We just got a third cat and noticed that they can't all eat at the same time, so one or two end up hogging the food during feeding times. Recommend…
This is a sorter for the Petlibro Granary Camera Monitoring Feeder (Dual Bowl) It is a spare part if you loose or damage the original one. On my Granary Feeder the original sorter does not work properly, so i designed my own one.…
Impreso con boquilla 0.4mm Generador de perímetros Arachne
Un punto de libro para regalar en San Jordi.
This design spawned from a need to reduce the portion sizes from our Petlibro (model: PLAF006). I've included two STLs for small and smaller sizes as well as the f3d file for anyone who needs to adjust to fit their needs. This part sits…
My cat food was jamming the silicone wheel portionner of the feeder. I contacted the customer service that told me they could replace or reimburse. I took the later and fixed it myself. It's been working great for the past year now!…
Piccolo segnalibro a forma di farfalla Category: Art Tools
Nuestro soporte para libros combina elegancia y funcionalidad, permitiéndote organizar y exhibir tus lecturas favoritas de manera práctica y estilizada. Mantén tus libros en orden y al alcance de la mano con este accesorio perfecto para…
Fits Bowls Diameter: 5.35 inches or 136 mm Depth: 1 inch or 27.5 mm
This adapter is designed to work with the Small 5.9" OHMO Slow Feeder Cat Bowl on amazon. My one cat eats way too fast from the regular bowl and makes himself sick, so I designed this adapter to force him to eat slower. I tried other…
Sujetalibros simple para figuras de 43mm base. Easyprint Book end for 43mm figures base
Deutsch: Neben diesem tollen Blumentopf im Robert-Design, fehlte noch ein entsprechender Mülleimer. Daher habe ich den Kopf vergrößert, damit man ihn besser als Abfalleimer verwenden kann. Am besten sieht es aus, wenn man “Fuzzy Skin”…
Print both halves and slide them together. I printed it with petg at a 0.55mm layer height with a 0.8mm high flow nozzle because I was impatient and that made it print a lot faster.
imprimir con mucho relleno para que no se rompa
Thank you to MochPoch for their awesome small kibble adapter . My cat needs to go on a diet and their file was PURRFECT. I printed the original in TPU and was worried it was too flexible. To match the OEM, I added ribbing to keep the…
Nuestra base multifuncional giratoria está diseñada para ofrecer la máxima comodidad y versatilidad. Compatible con laptops, libros y tabletas, esta innovadora base cuenta con un mecanismo giratorio que permite ajustar fácilmente el…
This remix adapts the original "Dog slow feeder bowl" model to fit the Petlibro Granary Dual 5L automatic feeder. The insert is designed to slow down food intake for cats that eat too quickly and tend to regurgitate dry food. Changes…
Con un relleno a 10% y altura a 0.2 debería de ser suficiente
Robert Libro Sugar Bowl is available with two different wall thicknesses. This is the version with the thicker walls. Support (Tree) Fuzzy skin
Print upside down for minimal supports needed. Premium option with locking alternate lid and 13 cups of added capacity available on my Printables store or at Cults, CrealityCloud, and Etsy (physical prints available) pages:…
Ejercicio de diseño realizado en grupo de iniciación para derivar el Panot típico de Barcelona en forma de punto de libro. Diseñado para recaudar fondos para la Marató de TV3. Se puede imprimir en varios colores. Las medidas son 132mm de…
this replaces the silicon tube inside that was chewed beyond use by one of the cats. print it from TPU and it works great.
el mejor y mas discreto sujetalibros elegante ,discreto pasa desapercivido no necesita soportes y con 6 paredes no necesita relleno ,facil de imprimir y facil de personalizar pudiendo añadir en su costado un nombre ,un dibujo etc 1x -…
Slow feed bowl general design remixed from this model on thingiverse: https://www.thingiverse.com/thing:5376282
The Petlibro capsule pet water fountain is great. Easy to clean, filters aren't too expensive, looks good. The only issue is you might find is the water bubbly sound is a little loud if you want to place it in a quiet room. This object…
This design is for a metal dish holder for the Petlibro PLAF004 automatic pet feeder. It came with a plastic bowl which apparently can, over time, lead to "chin acne" (their newer models now have a metal insert). The bowl it's designed to…
Sujetalibros para tu estantería. Realizado con PLA. Diseño simple pero muy útil.
My cats are gremlins that like to push their plates from under the feeder and then lick bare spots in the rug once their food dispenses everywhere. I designed this insert so anyone can easily attach a custom dish holder securely to the…
-Preguntar cualquier duda del modelo, Sígueme para ayudarme a crear mas modelos, un saludo amig@. Feliz impresión 3d !!!
Gedruckt mit PLA Ich habe mir für den PETLIBRO Futterautomat eine Doppelschüssel gebastelt, da es keine solche zu kaufen gibt. Als "Futterschüsseln" verwende ich Untertassen von Ikea der Serie 365…
Os traigo una MESILLA DE NOCHE con dos cajones (funcionales) , una lampara de tulipa y un libro. Está diseñado para que sea escalable y así poder ser usado en DIORAMAS. Tamaño (solo mesilla): 70 mm alto x 75 mm ancho x 53 mm profundo…
Es un modelo simple de imprimir, yo use superficie rugosa en el frente del modelo, para darle una mejor terminacion. 2 perimetros y 15 % de relleno altura de capa 0.32 con boquilla de 0.6 mm
Soporte libros para estantería forma V tipo IKEA
Este modelo 3d es un punto de libro en forma de perro.
This modified feeding tray is for this feeder: https://www.amazon.com/PETLIBRO-PLAF005-Automatic-Cat-Feeder/dp/B0953SDCRG/ If it looks like this, you are good to go. I remixed the slow feeder for another model of Petlibro feeder to fit…
Give your Petlibro Dual Granary Automatic Feeder a home that's as thoughtfully designed as the rest of your space. This stand elevates the feeder off the floor while drawing inspiration from the clean lines and tapered forms of…
Once combined you will now be able to use the Petlibro air feeder with the surefeed microchip feeder to keep kitties from eating each other's food. 5 total print files (Top, Middle, Bottom, Slide, and the lid to accommodate the larger…
Hi everyone: Just sharing a replacement guard I cooked up for the Petlibro One RFID Smart Feeder (Model PLAF301). Currently designing a shroud to keep my orange cat from weaseling himself in and pushing my other cat away while she feeds.…
I use a different bowl in my Petlibro feeder, so I raised it around 15mm so it fits nicely under the chute. It uses fairly minimal amount of plastic. If you need a different height for a different bowl, you could stretch the model, or…
altura capa 02 no soportes relleno 20 imprimir en espejo si se quiere modificar la direccion
This is a temporary use replacement straw/tube for the PetLibro Dockstream water fountain. My cats ate the original so t
Segnalibro BAO Publishing. Layer 0.15 Riempimento 15% No Raft. No Brim.
Fits a bit loose and could certainly be made better but this is a 5 minute blender export. Print times was about 1hr on a Prusa Mini v1.
Immagina un segnalibro che raffiguri il famoso clown del romanzo di Stephen King. Ecco Pennywise, con il suo sorriso sinistro è perfetto per gli amanti del genere horror che non potranno fare a meno di utilizzarlo durante le loro letture.
These Petlibro bowl bowl replacements allow you to dump the food out onto a feeding mat. They work with the PLAF003 model. Check out the PETLIBRO PLAF003 Stand as well. NOTE : The FDM process does leave areas in the print where bacteria…
I am new to 3D printing and designed a simple stand for my PETLIBRO Automatic Cat Feeder. Tips and Tricks are welcome and feel free to use the model. The cat feeder constantly got jammed since the kibble didn't go into the bowl. It helped…
Sigue siendo un modelo simple de imprimir como el original. recomiendo imprimir de costado asi queda mas fuerte y sin soportes . yo lo hice con una superficie rugosa en el exterior del modelo para darle un efecto distinto. pero solo 0.2…
Once combined you will now be able to use the Petlibro air feeder with the surefeed microchip feeder to keep kitties from eating each other's food. 5 total print files (Top, Middle, Bottom, Slide, and the lid to accommodate the larger…
Petlibro PLAF103 Fix adds angles to the rotor to help with jams. Will not prevent jams if the outfeed gets backed up working on a fix for this. Printed out of PLA, 2 walls, 15% infill. If your like this model consider buying me a coffee?…
ITA : supporto per modifica calibro per auto rc ENG : RC Car Gauge Modification Support
Sliding Cursor repair part for caliper case/enclosure - Cursore chiusura per scatola calibro Easy to print, optimized filament usage All our designs are free to download and use. Your support fuels our creativity. If you downloaded and…
Gridfinity bin for 3 × Libro textmarkers A 1×1×6 Gridfinity bin that fits up to three Libro textmarkers. These cheap markers may or may not be available for purchase in your area anymore, but if you have some, this is the perfect bin to…
Es un libro falso, que irá escondido con el resto de los libros de tu biblioteca y que TIENE UNA CARACTERÍSTICA ESPECIAL, que es un compartimiento falso "secundario", que no es tan obvio como el primario "el cebo", y que si o sabes donde…
Porta calibro e metro 15cm per pannello porta utensili con gancio a 4 fori
Cubierta creada para usar bridas como anillas. En las fotos de describe un poco el proceso de uso.
Supporto per calibro filetti per parete attrezzata Honeycomb Wall. Consente di sostenere un calibro per filetti di dimensioni 18x12mm circa
This is a stand for the PETLIBRO PLAF003 pet feeder that lifts it up about 6 inches. This can be helpful if your pet has digestive issues and needs to be more upright when feeding, or if you are using a the PLAF003 food ramp to dump the…
A small ramp that sits between the chute and bowl on the Petlibro to avoid the chute getting clogged
I originally bought two of these feeders, but one had a smaller drop slot creating inconsistent feeing. I contacted Petlibro and they're aware of the issue but don't send out a replacement essentially saying “you get what you get”. I…
Segnalibro dedicato al Castello di Highclere, ambientazione della famosa serie Downtown Abbey. Disponibile in due versioni, una con il solo castello e una con la scritta. Spessori scelti per la stampa con uno spessore di layer di 0.2 mm e…
A screw-down cradle for the PETLIBRO DockStream battery-operated fountain (PLWF115) , designed to keep the fountain in place while still making it easy to remove for refilling and cleaning. I built this because my cat would constantly…
Fermalibri raffigurante il pellegrino di Santiago de Compostela. Presente versione destra e sinistra. Stampato in semplice PLA. Scalare a piacere le dimensioni.
Pequeño marca páginas con temática halloween. Altura de capa 0.2
Punto de libro de Goku niño nube voladora, protagonista de la mítica serie de Dragon Ball.
This model was inspired by ThoughtFactory over on thingiverse doing this with a feeder by PETKIT. Also refer this for assembly and demo video: https://www.thingiverse.com/thing:6206548/files Goal This whole setup is done with the purpose…
This is a temporary use replacement straw/tube for the PetLibro Dockstream water fountain. My cats ate the original so t
This adapter is designed to work with the Small 5.9" OHMO Slow Feeder Cat Bowl on amazon. My one cat eats way too fast from the regular bowl and makes himself sick, so I designed this adapter to force him to eat slower. I tried other…
