Search results: lii

Sort order

137 models

P
PrintablesAndiY82

Labeliing Template

Used to label wooden pallets with spray can.

Print approx. €14.90–€18.21 excl. taxPreliminary estimate for one variant

Downloads
5
Likes
2
Rating
0
P
PrintablesDET-Man

CNC X-Carriage Add-On Parts for VORON Stealthburner (Vitalii3D)

The VoronLightweightXCarriage by Vitalii3D 🥰 is a fantastic lightweight carriage for the Stealthburner but I was not happy with the existing cable management solution for a ClockWork 2 setup. So, time to make some parts. The Features A…

Downloads
2,420
Likes
18
Rating
0
P
PrintablesTritschi

LiIon 18650 Battery Manager (Test, Charge, Discharge)

Housing for the LiIon 18650 battery tester, charger, discharger. Consisting of three stl-files: Main Housing Safety Grid for the two power resistors (protects your and others hands) Three knobs for operation Printed on my MK3S+ in PLA,…

Downloads
607
Likes
83
Rating
5
P
Printablesviktori

LiIon 18650 to 26650 adapter

This is an adapter so one can use common 18650 LiIon cells instead of 26650 cells in a tubular receptacle. It should be printed in vase mode. I printed the one in the photos at 0.34mm layer height and 0.4mm perimeter thickness. The cell…

Downloads
557
Likes
70
Rating
4.8
P
Printablesszwojtyla

Dasai Mochi DIY with 16340 LiIon battery and 1.3" oled display

This is a remix of a great project. Source: https://makerworld.com/en/models/1844353-the-mochi-housing-and-inner-frame-dasai-mochi#profileId-1970817 I added a 16340 Li-ion battery and a TP4056 USB-C charger. You'll also need an SS12D00…

Downloads
423
Likes
21
Rating
0
P
PrintablesLenny B FPV

21700 liion Battery Cage 6s 1p 2p universal + FalconRad Falcon 7 mod

Simple cage for 21700 liions in 6s1p and 6s2p configuration. I designed a simple universal Version without "feet" and a Version with “feet” so the packs fit and rest secure on the topdeck of the Falcon 7 frame. Also there is a connector…

Downloads
348
Likes
53
Rating
0
P
PrintablesTwistedVyon

Vitalii CNC Aluminum Gantry Z-Chain/Endstop Mount

Vitalii CNC Aluminum Gantry Z-Chain/Endstop Mount/PG 12 gland

Downloads
245
Likes
38
Rating
5
P
PrintablesVitalii3D

Vitalii3D XOL/A4T Mount Printable Parts

Please print from ABS or any other high temp material using official recommended Voron settings. A4T/XOL Mount

Downloads
235
Likes
19
Rating
0
P
PrintablesParagon

Powiększenie Baterii Briggs&Stratton InStart 775IS #briggsstratton #instart #liion

Zapraszam do filmu z budowy powiększenia Baterii do kosiarki Briggs&Stratton InStart 775IS… - Jeżeli chciałbyś zapoznać się z tym co robię na YouTube i Facebooku Zapraszam: https://www.magazynowanie-energii.com - Lista wszystkich…

Downloads
230
Likes
11
Rating
0
P
Printablesheribertl

Voron 2.4 Vitalii CNC AB Drive Units Top Bearing and Z-Chain Mount

These parts are for Voron 2.4 Vitalii CNC AB Drive Units. Added Top Bearing Mounts for the AB Drive Units based on Hartk1213 Micron R1 Double Shear Mounts using F695 bearings and longer shaft steppers (OMC 17HS19-2504S-H 55mm). Changed…

Downloads
219
Likes
44
Rating
5
P
PrintablesMarkus

4x 18650 LiIon Battery Box

I used TPU to print that case. My goal was to store 4 batteries in the smallest possible way. Print Settings (depending on your chosen material and printer capabilities) no support needed 0.2-0.4mm layer hight 3-4 perimeters 3-5 top…

Downloads
214
Likes
15
Rating
5
P
PrintablesTritschi

LiIon 18650 Filament Feeder for Bowden Loading (Extruder or MMU etc.)

After 1 ½ years of posting my Motorized Filament Feeder, a new machine was posted in Printables. The “Bowden Speed Loader for Prusa XL and CORE One and similar for loading filament” designed by @MrFlippant inspired me to do a Printables…

Downloads
211
Likes
95
Rating
5
P
Printablespetasto

LiIon 2S1P receiver battery pack holder

Holder for JETI Power Ion 2600A 2S1P receiver battery pack or similar 2S1P Li-Ion battery packs suitable for fixing into a model using four servo screws. The model is supposed to be printed from PETG to withstand elevated temperatures…

Downloads
176
Likes
7
Rating
0
P
Printableszeroflow

LiIon 18650 to 26650 adapter

Three versions to use 18650 batteries in 26650 flashlights. Print instructions Print with vase mode and a 0.4mm nozzle to get the right dimensions.

Downloads
157
Likes
5
Rating
4
P
PrintablesParagon

Autko na Akumulator Upgrade Li-ion 3s7p #akumulatory #mercedes #liion #18650

Zapraszam do filmu z budowy akumulatora Li-ion z ogniw 18650 do autka kolegi :), wykorzystane ogniwa 18650 oraz BMS 3s 60A… - Jeżeli chciałbyś zapoznać się z tym co robię na YouTube i Facebooku Zapraszam:…

Downloads
157
Likes
28
Rating
0
P
PrintablesDrew

Bosch 18V NiMh tool to Makita 18V LiIon battery adapter

Adapter to use Makita LXT 18V batteries in older Bosch 18V NiMh tools. Tested on Bosch 52318 jigsaw. Uses Bosch upper adapter and lock bars by PhNxx: https://www.thingiverse.com/thing:4725237 Requires: 8x M4x8 SHCS 8x M4 hex nuts Makita…

Downloads
149
Likes
17
Rating
0
P
PrintablesGekka

Nergaliid, devil toad

Nergaliid from Critical Role, Remixed from Hezrou model by Yasashii https://www.thingiverse.com/thing:4960223

Downloads
141
Likes
3
Rating
0
P
PrintablesWittiko

TP4056 based charger for 14500 LiIon cells

For my flashlights 14500 battery I needed a charger fitting the protected version of a TP4056 because those I had laying around. So i grabbed the AA charger holder from enif and designed a holder for the charger board in Fusion360,…

Downloads
133
Likes
8
Rating
4.5
P
PrintablesPIZZA_CAT

WALL HOLDER FOR CHARGER LIITOKALA LII-500

An ideal wall holder for the LiitoKala Lii-500 charger that will allow you to free up space on your desk. Simply print out the holder and place your charger(s) on the wall. The holder has 4 holes with a diameter of 3 mm in order to use…

Downloads
126
Likes
18
Rating
5
P

Extended X- Endstop for Vitalii3D Super LightWeight Carriage

Hello, I noticed while using my Chaotic Labs carbon fiber tubes, the x-end stop piece for Vitalii3D Super LightWeight Carriage came up short. I made a part that will now ensure that the end stop will hit the end of the carriage. Also…

Downloads
114
Likes
14
Rating
5
P
PrintablesGudrunas

LiitoKala Lii-S2 waterproof case

Construction : Case include 5 different parts. All this parts 100% printable without any supports. Material: lock_liitokal_s2_x2, petlya_liitokal_s2_x2, top_liitokal_s2, bottom_liitokal_s2 were printed by PETG from ABG. liitokal_rubber -…

Downloads
110
Likes
17
Rating
0
P
PrintablesModel Magic

Universal Monsters - Frankenstein - It's Aliiiiive! - 1931

Universal Monsters - Frankenstein - It's Aliiiiive! - 1931 3D printable model.

Downloads
107
Likes
22
Rating
0
P
PrintablesAndreas

LiitoKala Li-600 holder

I designed this simple holder to attach my LiitoKala Li-600 battery charger to the stud of my Ikea Ivar shelf.

Downloads
102
Likes
13
Rating
5
P
Printablesviktori

LiIon 18650 to 3xAA adapter

This is an adapter so one can use common 18650 LiIon cells instead of 3xAA cells in a tubular receptacle. It should be printed in vase mode. I printed the one in the photos at 0.3mm layer height and 0.4mm perimeter thickness. Dimensions…

Downloads
89
Likes
22
Rating
5
P
PrintablesnLamer

Alfa Romeo 916 Washer Rail Cliip

Clip for holding the window washer rail in place. 3 Versions for different wipers. STEP file included.

Downloads
86
Likes
1
Rating
0
P
PrintablesTommy1972

Wall bracket Battery charger LiitoKala

Wall bracket for battery charger LiitoKala Engineer Lii-500 Print instructions Printed without support

Downloads
86
Likes
14
Rating
0
P
PrintablesRonLuca

6S LiIon bracket

For 6S LiIon cells 21700.

Downloads
84
Likes
3
Rating
0
P
PrintablesAdam Swint

Improved Beacon/Cartographer mount for Vitalii3D CNC Dragonburner carriage

Update 11/2025: Updated the brace so it does not interfere with the Cartographer connector. Also made a few more cable management cutouts for more routing options. I was having a hard time getting consistent results from my Carto/Beacon…

Downloads
82
Likes
14
Rating
0
P
PrintablesTritschi

LiIon 18650 Charger with TP4056 Module

Another LiIon Charger case. Biggest problem for me was until now, that good cotact to the LiIon battery was mostly poor. PLA is pretty brittle and not a good material for spring loads. So I decided to create a steel spring load with M4…

Downloads
79
Likes
14
Rating
0
P
Printableshasankabaca

Back Housing for "LiIon 18650 Battery Manager"

Back Housing for "LiIon 18650 Battery Manager"

Downloads
78
Likes
4
Rating
5
P
PrintablesJbori

Y endstop mount for use with Vitalii's CNC A/B mounts

This mount is held in place using the metal spacers that come with the Vitalii kit. The switch is held on with a M2x8 self tapping screw. also has a spot for a 2pin JST connector to make plugging in and unplugging the switch easier. Link…

Downloads
77
Likes
19
Rating
0
P
PrintablesTritschi

LiIon 18650 Battery Box

Just another box for LiIon batteries, type 18650. The specialty here is the built in Voiltmeter and the On-Off-Switch. Feel free to make your 3.6 Volt or 7.2Volt Accu. Go in Parallel (3.6VDC) or Serial (7.2VDC). Get rid of sorrows to…

Downloads
69
Likes
17
Rating
0
P
Printablestingeltangelbob

LiitoKala Lii-S8 Skadis

LiitoKala Lii-S8 Skadis mount

Downloads
63
Likes
6
Rating
0
P
PrintablesDenny77

Nice Holder for 18650 LiIon Akkus

A nice looking Holder for 18650 akkus. Its designed for storage, fast insert and removal. Not designed for akku welding. Print with 2 wall lines and 5-10% infill works for me. Or take 4 wall lines with 0 infill. There 2 stl files: drill…

Downloads
62
Likes
3
Rating
5
P
PrintablesEugen C

Makita Ni-MH 12v to Liion 18650 battery BOX

This a battery box used to replace the old battery that contained Ni-Mh batteries with new LiIon batteries. You can follow the link to see the results: https://www.youtube.com/shorts/p5KDYzAk8KI?si=tkCB9g9bsyi69 You will need a BMS 4S 40A…

Downloads
60
Likes
10
Rating
5
P
PrintablesJanKruger

LiitoKala Lii-PD4 Battery Charger Multiboard Holder

Multiboard holder for LiitoKala Lii-PD4 Battery Charger using 2 Push fit Connectors. There is a Reinforced version with a stronger Bottom Bracket. I have NOT testes this one yet.

Downloads
59
Likes
11
Rating
0
P
PrintablesRoed

Beacon/Carto spacers for Vitalii3D XOL/A4T mount

When you use the Vitalii3D XOL/A4T Mount for Voron Printers it's possible that your Beacon/Carto is hitting the hotend. In my case it was the Trianglelab Dragon Ace Volcano where Beacon hits the sock/heater block. The hotend is also in…

Downloads
59
Likes
7
Rating
5
P
PrintablesTritschi

18650 LiIon Cell Charger

I wanted to create a functional design charger. What you need: 2xTP4056 LiIon charger modules 2+2 contact plates plus / minus 2+2 green and red LEDs 2 voltmeters Micro USB-breakout board USB-C breakout board Some cable and shrink tube,…

Downloads
57
Likes
23
Rating
0
P
PrintablesJindrysCZ

18650 Battery Holders LiIon

Just a few and simple (but useful) battery holders. Most other holders didn't fit my needs so I designed my own. They're a bit oversized for printers with poorer print quality. (d=19mm) Print settings Material: PLA Infill: 10% (but ig…

Downloads
57
Likes
3
Rating
0
P
Printableseffendi

LiitoKala Lii-PD4 Skadis holder

LiitoKala Lii-PD4 Skadis mount

Downloads
56
Likes
6
Rating
0
P
Printablesitsjsf

Voron Vitalii Metal Tap Endstop Extender Arm

This is a remix of the X endstop holder of Vitalii3D-xyz's MetalTap . My Voron 2.4 Formbot kit included the X/Y endstop PCB that is mounted on the gantry. TAPs assembly assumes the X endstop to be on the toolhead itself. I wanted to keep…

Downloads
56
Likes
4
Rating
5
P
PrintablesHusHageHobby.no

LiitoKala Engineer Lii-500 holder for IKEA Skadis

Holder for mounting LiitoKala Engineer Lii-500 on IKEA Skadis peg board.

Downloads
53
Likes
9
Rating
4.5
P

Club Car Precedent Charger Port for LiIon upgrade

For an upgrade to lithium battery, you need to swap the dc charge port to ac. This plate allows bolting a new 110v ac male port to the cart. just cutout the old charge port and bolt up a new one to this plate. looked around forever and…

Downloads
48
Likes
6
Rating
5
P
PrintablesTritschi

Repair or Spare Lid for BatteryHolder 2x18650 LiIon (Batterie Deckel)

After I accidently dropped my LiIon battery holder for 2 18650 I did not want to fix this by scotch tape or similar. So I designed a new lid, printed it, little file-off work and here it is! Advantage is if you have several of these…

Downloads
46
Likes
6
Rating
0
P
PrintablesChris vK

DIY Powerbank 18650 LiIon - 5V

I created a Powerbank for 18650 Liion. Most parts are recycled parts: 3x 18650 Liion (in my case 2400mAh) 1x step up module 5V 1x connector cable (in my case a micro usb) 3x M3x20 screws The cell package is spot welded. See my Spotwelder…

Downloads
45
Likes
7
Rating
0
P
PrintablesDM4DS

26650 LiIon / LiPo / LiFePo - TX16S Battery Lid

Higher Lid for the RadioMaster TX16S - designed it, so I can use 26650 8000mAh LiIon batteries while my 5000mAh LiIon was not enough for multiple days on the flying field. If you need a different height, maybe for 4x18650, let me know and…

Downloads
45
Likes
8
Rating
0
P
PrintablesLukas Čejp

Liitokala Lii-500s wall holder

holder for the Lii-500s charger, which is designed to be attached to the wall

Downloads
43
Likes
6
Rating
0
P
PrintablesMarcus9199

Printed case for Adafruit USB LiIon/LiPoly charger - v1.2

3D Printable case for Adafruit Lipo Charger https://www.adafruit.com/product/259 Print instructions Category: Electronics Print Settings Printer Brand: Prusa Printer: i3 MK3 MMU 2 Supports: Yes Resolution: 0.2 Infill: 30% Filament:…

Downloads
40
Likes
4
Rating
0
P
PrintablesAdam

LiitoKala Lii-500 HSW wallmount

Wallmount for LiitoKala Lii-500 charger, compatible with HSW

Downloads
39
Likes
9
Rating
0
P
PrintablesCagle 3D

Vitalii CNC Y Endstop Mount

Y-Endstop for Vitalii CNC Ganrty Included is a Blank, Voron logo, and Stealth Changer logo Install the CNC Gantry parts first. This endstop sticks out .5mm and will interfere with squaring up your gantry. The only extra needed parts are…

Downloads
39
Likes
4
Rating
0
P
PrintablesCowwolfe

Case for Adafruit Micro Lipo - USB LiIon/LiPoly charger v1

This is a simple case for the Adafruit Micro Lipo USB charger. It snap fits together (or you can super glue it). It will hold the included power cable inside the case. The two holes on the front allow for the LED light to pass through if…

Downloads
39
Likes
4
Rating
0
P
PrintablesSimon

Improved Beacon/Cartographer mount for Vitalii3D CNC Dragonburner carriage no endstop

I am using sensorless xy homing, so I wanted this improved/modified version without the endstop switch part.

Downloads
39
Likes
7
Rating
0
P
PrintablesLean 3D

Dummy battery, for LiitoKala charger

I used the leftmost item from this store https://www.aliexpress.com/item/1005008053423575.html I used 9 mm battery strips for the connector.

Downloads
38
Likes
14
Rating
0
P
PrintablesVincja

18500 Liion Battery Charger

This charger can be used with TP4056

Downloads
36
Likes
9
Rating
0
P
PrintablesTritschi

LiIon Battery Assembly Holder

For attaching soldered or spot welded strips / cables it helps a lot, when you have a reasonable holder by hand. Therefore I designed two possible holders. Each one can be used for 1s, 2s or 3s LiIon batteries. Fits LiIon, LiFe cells of…

Downloads
35
Likes
7
Rating
0
P
PrintablesIMALlama

4 Bay D cell battery adapter for LiitoKala Engineer Lii-500 Chargers

This is a battery adapter that will allow you to insert D cell batteries into a LiitoKala Engineer Lii-500. I included the Fusion 360 file, so you can customize it to fit other applications, but odds are it will fit most 4+ 18650 based…

Downloads
35
Likes
7
Rating
5
P
PrintablesBotaniCat

Succulents Box: Split Rock Cluster (Pleiospilos Nelii)

Succulents Box: Split Rock Cluster (Pleiospilos Nelii) Not just pretty to look at, but also practical! Can be used as: jewellery box gift box sweets jar organizer of small items secret hiding spot collectible succulents - got to plant…

Downloads
32
Likes
10
Rating
0
P
PrintablesPlexi

Super Bowl LII (52) Medallions - Trophy

These are medallions for the upcoming Super Bowl LII (52). The one design with the eyelet can be hung on a ribbon or string and given as prizes for each touchdown a team makes and the other design has a curved back so that it can be…

Downloads
32
Likes
4
Rating
0
P
PrintablesMario

Vitalii3D CNC X Carriage Beacon adapter for Dragon UHF

I bought this cnc x carriage https://www.etsy.com/listing/1639526932/super-lightweight-carriage-for-voron because the dragon uhf made my plastic x carriage heat sets fall out due to the plastic mount softening up from the heat. I also…

Downloads
31
Likes
7
Rating
5
P
PrintablesNautilus Forge

LiitoKala Lii-S8 IKEA IVAR side mount

⚒ No 3D printer? No time to source components? I just opened my new e-shop where you can buy physical, ready-to-use versions of my models! Designed with passion, printed and assembled with care ⚙. 📦 Shipping across the EU: 👉 Get it at…

Downloads
30
Likes
3
Rating
0
P
Printablesyonkiman

Modified Opto Mount for Vitalii TAP

I was building my second Vitalii TAP and realized I didn't have any more of the correct opto sensors for it. But I did have a few left over from my purchase of 5 cheap ones a few years ago. So I modified his Wired Optical Sensor Mount.stl…

Downloads
29
Likes
4
Rating
0
P

cooling for charger LiitoKala Lii-M4

cooling for charger LiitoKala Lii-M4 https://youtube.com/shorts/f0DtGn6g7zw fan 5в 4010 https://ali.ski/CIVgF9 USB-C https://ali.ski/Q4Yon

Downloads
29
Likes
3
Rating
0
P
Printablesminilogique

Scorpion Toolhead v1.5 for Vitalii mount /w Beacon or Cartographer

Redesigned extruder adapter (Sherpa Mini pattern), redesigned hotend mount (single piece vs two pieces), Beacon probe support. Stuff is being tested, BOM and guides will be added sometimes in the future.

Downloads
27
Likes
10
Rating
0
P
PrintablesDBWL

Fatshark Batterypack for 18650 LiIon

I designed a Housing for two 18650 LiIon Cells, to use with my Fatsharks. You also have a little space on the outside to mount a capacity/voltage indicator board (I used one from banggood for 2s) Today I got the cells and installed them.…

Downloads
27
Likes
6
Rating
0
P
PrintablesP.I.Engineer

nano goblin 3s 18650 liion squat pack spacer

print 2 of these in tpu and build your pack in this shape, it fits in the NG really well.

Downloads
26
Likes
1
Rating
0
P
Printablesbax04

LiitoKala Lii-600 + 18650 Battery IKEA Skadis

Keep your workspace tidy and your batteries fully charged! This custom 3D-printed holder is designed for the LiitoKala Lii-600 battery charger and a 6-slot 18650 battery organizer , perfectly compatible with the IKEA Skadis wall panel…

Downloads
26
Likes
9
Rating
0
P
Printableskiloalpha

PUG mount for Vitalii CNC Voron 2.4 Gantry

PUG mount for the Vitalli Aluminum CNC Voron 2.4 A motor mount.

Downloads
26
Likes
4
Rating
0

LiitoKala Lii-M4 table stand

A table stand for LiitoKala Lii-M4 for placing on a table to save space and easily view information.

Downloads
24
Likes
2
Rating
5
P
PrintablesGalin Petrov

LiFePO4 LiitoKala 3.2V 20Ah - MODEL

LiFePO4 LiitoKala 3.2V 20Ah - MODELLiFePO4 LiitoKala 3.2V 20Ah - MODEL

Downloads
24
Likes
3
Rating
0
P
Printablesadamek

LiitoKala Lii-PD4 Charger Skadis mount

Heres minimalistic Skadis holder for my battety charger LiitoKala Lii-PD4. Print it on the side

Downloads
24
Likes
6
Rating
0
P
Printablesmoshmast

PUG Mount - Vitalii3D Double Shear Trident AB Mounts

I created this updated PUG mount for the newer double shear variant of Vitalii3D's Trident AB mounts. I used the original design idea here and integrated a few variants of the popular PUG design. It should slide right into place with some…

Downloads
23
Likes
6
Rating
0
P
PrintablesJim

PZ Probe Mount for Stealthburner with Vitalii3D CNC Carriage

PZ Probe Mount I printed with typical Voron print settings in ABS. I did use supports on the face adjacent to the stepper motor - that side is not visible. Mount to carriage with M3x6 BHCS, and mount board using screws supplied with the…

Downloads
22
Likes
9
Rating
0
P
PrintablesGalin Petrov

Battery holder for 4S 12V LiitoKala 3.2V 20Ah

Used 4PCS LiitoKala 3.2V 20Ah/25Ah Lifepo4 Battery4PCS LiitoKala 3.2V 20Ah/25Ah Lifepo4 Battery LiitoKala 4S 12V 100A BMS LiFePo4 Battery Protection PlateLiitoKala 4S 12V 100A BMS LiFePo4 Battery Protection Plate

Downloads
21
Likes
4
Rating
0
P
Printableskabturek

LiitoKala Lii-500 holder for openGrid

Bottom uses directional snaps, top uses normal. The top one has 2 version - normal doesn't have any play and “loose” has more play.

Downloads
21
Likes
6
Rating
0
P
PrintablesMHillyer

BETA Strain Relief for LDO Nitehawk NHK-36 Cable & Vitalii CNC EBB36 Mount

THIS MODEL IS A WORK IN PROGRESS This is designed to better mount an LDO Nitehawk NHK-36 cable (Described in the docs as "fully overmolded") to a Vitalii CNC EBB36 mount rigidly, including the spring steel umbilical guide. Personally I…

Downloads
21
Likes
6
Rating
0
P
PrintablesParagon

Pegasus Ebike - Przeróbka z Ni-Cd na Liion 18650

Do pobrania mój projekt przeróbki baterii Pegasus Ebike - Przeróbka z Ni-Cd na Liion 18650. Film z budowy: Pliki CAD w formacie STP:…

Downloads
21
Likes
2
Rating
0
P
PrintablesZempai

LiitoKala Lii-PD4 Storage shelf mount

A quick remix of effendi 's model to allow mounting on a rack shelf with 25mm spacing. Nothing fancy, just works. Made to work with 6mm server rack bolts with 12mm head.

Downloads
20
Likes
3
Rating
0
P
PrintablesShaggyDawg

Iron Man Mark XLII (42)

Made from pics I found & liked. Models may not be perfect. Made to 150mm (may differ due to pose). Made in STL & 3MF.

Downloads
20
Likes
1
Rating
0
P
PrintablesOsfald

Eco-friendly toys - conversion for 18650 LiIon batteries

Parents around the world face similar issues, including the problem of tonnes of batteries ending up in the trash from electric toys. My daughters also often get toys powered by traditional disposable alkaline batteries. So I often…

Downloads
20
Likes
7
Rating
0
P
PrintablesMike_3D

Alea evangelii

Alea evangelii , which means "game of the gospels", was described, with a drawing, in the 12th-century Corpus Christi College, Oxford manuscript 122, from Anglo-Saxon England. It was played on the intersections of a board of 18×18 cells.…

Downloads
19
Likes
1
Rating
0
P
PrintablesSteven Hart

Goliath-Cpap-beacon mount for Vitalii lightweight carriage

Mounts to Vitalii carraige for goliath-hextrudort-cpap-beacon combo.

Downloads
19
Likes
3
Rating
0
P
PrintablesJára

LiIon battery charger box e.g. for Sony RX100 camera

I have found several models for LiION battery. But no of them has proper size for Sony's NP-BX1. I has been used male BEC cable e.g. this one . Please use at least ABS. Other materials has low melting point and you can demage charger…

Downloads
19
Likes
5
Rating
0
P
Printableskumquad

2s 5000mah LiIon Battery Pack with USB-C, capacity checker and integraded balancer for goggles

I use this packs to power my goggles, because I don't like having loose cables hanging around to my battery in the pocket. The 2s5Ah battery lasts me one complete racing day and recharge takes around 3-5hrs, depending on your USB charger…

Downloads
19
Likes
2
Rating
0
P
PrintablesNeuralhub

Liitokala Lii-100C 18650 battery holder

A locking holder for an 18650 battery designed for the Liitokala Lii-100C charger. It does not allow the battery to jump out of the charger, protects against distortions, and holds itself securely to the case. The default height of the…

Downloads
19
Likes
1
Rating
0
P
Printablestektalon

simple 6s 18650 LiIon pack bumper

printed in TPU, i got good results with 15% infill, concentric infill pattern

Downloads
18
Likes
1
Rating
0
P
PrintablesMighty

Taranis Q X7 LiIon 18650 battery holder Remix

This is my remix of curly_cz's great Taranis Q X7 LiIon 18650 battery holder . I removed all horizontal fillets as my printer frequently makes a mess of them when printing at low resolutions. I also removed the supports in the XT60 holder…

Downloads
16
Likes
1
Rating
0
P
PrintablesGeir Jakobsen

Liitokala Lii-M4 Wall mount

Just a quick wall mount you might also want to use. It does not need supports. Print in PETG I made one in PLA, and it is holding up, but the retention clips will fail at some point. I designed it with a better opening for the USB ports,…

Downloads
15
Likes
1
Rating
0
P
PrintablesPaul Gritt

Cable support for Vitalii3D CNC EBB36 Mount

Cable support for the Vitalii3D CNC EBB36 Mount, specifically for the EBB36 Gen 2 and Orbiter 2.5 configuration. I have designed it to be a very tight fit around the CNC Mount. Make sure the mount is pushed all the way into the plastic…

Downloads
15
Likes
3
Rating
5
P
PrintablesArmin Anderson

Vitalii3d CNC A Drive PUG mount

Uses 2 m5s, 3 m3s (one optional), and two m3 heated inserts. I've run this for 200 hours without issue. I use the secondary cable hole for a camera and the primary/PUG for my umbilical Model references the actual cnc design files from…

Downloads
14
Likes
5
Rating
0
P
PrintablesJohn Doe

HSW holder for lii-nd4

Must be printed in PETG, as it relies on flexibility of material

Downloads
13
Likes
1
Rating
0
P
Printables3dprints4life

Trichter mit Verschluss für melii Snap & Go Pods / Funnel with cap for melii Snap & Go Pods

DE: Ein praktischer aufschraubbarer Trichter für melii Snap & Go Pods mit Verschluss. Dieser eignet sich um, z. B. Pulver schnell in ein kleineres Gefäß zu füllen. Wenn dir mein(e) Modell(e) gefallen, hinterlasse mir bitte ein Like, um…

Downloads
13
Likes
1
Rating
0
P
PrintablesHamRadio R3MDG

Liitokala Charging Adapter

I don't have an iMax B6 on hand, so I decided to use Liitokala's charging, which has a test function. I modeled an adapt

Downloads
12
Likes
1
Rating
0
P
PrintablesAutomator

Starliink Gen3 cable junction cover adjusted to locally available junction.

I printed my one using white ASA material using .3 mm layers in draft mode. If you care about precision and less visible lines, surely it is possible to print using more precise settings. Printing time in my case was over 3 hours.

Downloads
11
Likes
2
Rating
0
P
PrintablesLadySapphy

vitalii3d endstop fix

I like the vitalii3d XY joint, but the adapter for the end stop is out of date. I updated it to have a notch for the lip on the right joint as well as moving the holes to fit the hall effect endstop. I hope this helps others.

Downloads
11
Likes
2
Rating
0
P
PrintablesLuisa

Mock 3S5P LiIon Battery pack

Useful for modelling, for reserving volumes or just for fun.

Downloads
10
Likes
0
Rating
0
P
Printablesakashrpatel

Vitalii3D CNC Front Idler Cover / Jabberwocky Cutter Helper

A cover for the Vitalii3D CNC Front Idlers that helps your Jabberwocky cutting arm compress fully to cut filament.

Downloads
10
Likes
3
Rating
0
P
Printablesvvad1

LiitoKala Lii-600 holder for openGrid

The holder is designed to be installed on openGrid using openConnect latches.

Downloads
10
Likes
3
Rating
0
P
PrintablesSimon

Vitalii3D Dragonburner CNC carrier

I have a trident, the Vitalii3D recommended mount makes the carto too far back and can hit the middle rear leadscrew. None of the other models I could find worked. So I created my own. y_offset: 22.5 I have two versions, one with just…

Downloads
9
Likes
0
Rating
0
P
Printables4GAuto

Vitalii3D Lightweight X Carriage Klicky Adapter for Slice Mosquito

Printed mine in PCCF but I am sure ABS/ASA would be fine. After the first one melted from being too close to the hotend I just didn't want to risk it.

Downloads
9
Likes
1
Rating
0
P
Printablesdaspixel

18650 LiION Voltage Checker

This is a very basic cover or holder to keep a 18650 battery contact and an basic 3 digit voltage checker together. you need: 18650 battery contacts like this…

Downloads
8
Likes
3
Rating
0