1 / 13
CNC X-Carriage Add-On Parts for VORON Stealthburner (Vitalii3D) — image 1
1 / 13

CNC X-Carriage Add-On Parts for VORON Stealthburner (Vitalii3D)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

X-Endstop and PCB Klicky mount with sleek cable management for the VoronLightweightXCarriage - of course with style. 😎

Rating
0 / 5
Likes
18
Downloads
2,420
Makes
0
Views
4,142
Reviews
0

Updated at source:

Model information

License
GNU General Public License v3.0

The VoronLightweightXCarriage by Vitalii3D 🥰 is a fantastic lightweight carriage for the Stealthburner but I was not happy with the existing cable management solution for a ClockWork 2 setup. So, time to make some parts.

The Features

  • A clean X-endstop solution

  • A matching PCB Klicky mount

  • Sleek cable management guiding the cables into your CW2

... all of course with a little bit of style 🤩


X-Endstop Configuration Check

Depending on your specific setup (e.g. XY joints, installed mods, X-probing configuration, or any CNC/X-Beam upgrades), the Cable Guide part may contact the XY joints before the X-endstop triggers, preventing X from homing correctly.

Check that your X-Endstop can trigger before X-homing your Voron!

In the rare case that your run into this issue, I have two options for you:

  1. The simple one: Cable Guide MINI - Just keeps the cables in place but doesn't go up into the critical region. If you use this variant, route the cables on the left side of the CW2 cover screw to avoid any risk of pinching the cables during homing.

  2. Move the Omron sensor on the X-Carriage - There are 2 variants of the Omron mount that shifts the Omron switch slightly in X-direction (0.5 or 1.0mm to the right) giving you some room to play with. Be aware that this affects your coordinate system (you will loose that little bit of X-travel), so update your Klipper configuration accordingly.

And for the very brave of you: I left the initial model in with full cable cover: The Cable Guide MAX. If you try it, be warned, chances are high that it effects your X-homing.

Companion Models for SB2209 / 2240 Based Toolheads:


The Cable Bridge PLUS forms a sleek and ultra compact umblilical wiring solution for your Stealthburner with CW2:

Cable Bridge PLUS for SB2209 / SB2240

Refined cable bridge for SB2209/SB2240 with PG7 gland, stepper cable cover and steel wire mount - sleek and compact. 


And Use the purpose made plug for the SB2209 / 2240:

XT30 2+2 Plug for SB2209 / SB2240

Compact XT30 2+2 plug for BTT SB2209/SB2240 toolhead boards with minimal footprint for clean cable management.

Compatibility & Requirements

  • Designed as add-on parts for the VoronLightweightXCarriage by Vitalii3D

  • Requires relatively small cable diameter (AWG24, tested with pre-crimped JST PB silicone cables used for BTT EBB 2209 CAN V1.0)

Assembly

Just follow the pics (the red part will help inserting the heat set inserts - tough to get out at the end but heat set inserts will be placed precisely 📐.

Printing

Material:  ABS, ASA, PC-CF or similar. The PCB Klicky mount is designed as slim as "acceptable", so make sure you use some material that does not flex or deform under heat.

Settings: Just use your standard VORON print settings, no supports required.

BOM

  • Cable Guide: M3x5mm SHC (1 pcs)

  • PCB Klicky Mount: M3x6mm BHC/SHC (2pcs)

  • X-Endstop Mount: M3x6mm SHC (2pcs)

  • X-Endstop OMORN switch mounting options:

    • M2 x 10 Self-Tapping Screws (2pcs)

    • M2 x 4 x 3.6mm Heat Set Inserts, M2 x 8mm SHC (2pcs)

Tags