Counting matching models…
UPGRADED VERSION: https://www.printables.com/model/375246-skadis-boards-linker-v-20 A simple bracket designed to hold two Skadis board together, for example if you don't want to drill too many holes for wall fasteners. Uses holes 40 mm…
Use this link to join chain, rope, or just make a long chain as a Halloween prop! To attach, slide the two halves into each other from the side, then feed a piece of filament through the hole locking them together. Printed with PLA with 8…
PUMP-ACTION PLINKER: (TOY LAUNCHER) This the most functional and fun launcher I have made to date and I am very excited to share it with you all. Requires a couple of springs and a handful of M3 hardware to make functional! Currently…
Plinker V2.0 (Bolt-Action Blaster): Designed in FreeCAD V 0.21.0 Printed on a Bambu Labs P1P The second entry in my shell-ejecting plinker series. The V2.0 features a bottom loading magazine and functional rails for mounting accessories,…
An upgraded version of a bracket designed to hold two Skadis board together, for example if you don't want to drill too many holes for wall fasteners. Keeps the boards aligned and tightly bound together. Snaps into place and uses two…
This is a Suzuki DL650 V-Strom blinker housing, that easily brakes when the bike falls :) Very big thanks for "remote" creating the modell to Barbér Máté . Print Settings Printer: prusai i3 rework 1.5 Rafts: No Supports: Yes Resolution:…
Since the original grills are too big for the I made these inspired by a design found on facebook but they now fit better. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes Resolution: 0.24 -0.1 Infill: 20%…
SUB-PLINKER (Plinker 2.5): The Sub-Plinker is a compact, low-power shell ejecting blaster with printed projectiles. The design was heavily inspired by the Kriss Vector submachine gun and the Ticon pistol from Cyberpunk 2077. This is a…
This is a remix of the Skadis Boards linker by Koprov that has thicker pegs to provide extra tight fit in the board's hole. The fit now is very tight. In addition to the original model where you could only position the links horizontally,…
Ich wollte meine Blinker Vorne an meiner Z900 SE umbauen und habe im Internet Adapter dazu bestellt. Diese haben mir erstens gar nicht gefallen bezüglich ihrer Oberfläche, ausserdem hatte ich die Falschen bestellt die gar nicht passten.…
Nachdem im Januar 2022 die produktion von den Nanoleaf Aurora eingestellt wurde, ich 2 Linkers zu wenig für mein set hatte, habe ich mich hingesetzt und dieses kleine schmuckstück gemacht ich habe 4 kabel von einem Lan kabel genommen,…
i made this off of my 98 Jeep Cherokee Xj. will fit a 97-01 XJs. My aftermarket headlights have blinkers integrated so i was able to remove them. The bracket is designed with full adjustment for a 7'' led light bar on amazon. see below.…
This is a model of my Dad's old sailing boat "The Parramatta". known as a sheltie (sailing boat typical in the Shetland Islands). It has been restored several times and is know owned by the Sunderland Maritime museum. Those sailors…
The thing that this thing is based off is so flimsy! I accidentally dropped my e-bike and it broke off. So I started to look for replacement parts. I know this thing can be found easily on Alliexpress on the cheap but my problem is it…
Indicator/blinker adapter for the Moto guzzi V7 III for when you want to install aftermarket indicators with M8 Mounting stem. The “recessed” model has, as the name suggests, a small recess to hide the edge on the indicator base. This…
Shortens the Blinkers on the bike. Reduces chance of them braking if the bike is dropped on its side.
Koprov's original linker was great, but didn't quite “snap into place”. The V2 requires screws to lock into place, and I wanted to be able to put the connector in from behind so it's not as obvious. I printed this in PETG at .2mm height,…
I designed this adapter for LED blinkers for some Triumph motorcycles like the Speed Triple and others. It is based on this idea: https://www.britishlegends.fr/en/indicator-adapters-triumph.html I saw some other designs online that didn't…
Update (2024-08): New mounts for m8 blinkers. My blinkers from louis keeps breaking on the rubber part. I think it might be because the m10 nut is thight agains the metal and keeps vibrating the blinker. I found basically the same cob…
This is a remix of the Skadis Boards linker by Koprov that has thicker pegs to provide extra tight fit in the board's hole and imbedded magnets for light tools. The fit now is very tight. In addition to the original model where you could…
Simson Blinker Gehäuse . Für die Blinker ohne weißen Hintergrund nur mit der Metall-Lampen Fassung. Bei Fragen oder Verbesserungsvorschlägen bitte anschreiben danke.
A Blinker support for the street triple/Daytona blinkers. My 2011 Triumph street triple had all of the blinkers broken due to the support being to dry over time. Here is a remplacement part for the support. It is plug n play, all you have…
I made this turn light holder in hope it won't break when the motorcycle gets sleepy and lays down. At least I end up with only one component broken. Only time will tell ( was not yet field tested ). This model will replace the bulb…
Das Bauteil ist pro Blinker 2 x zu drucken. Ich habe es in ASA gedruckt. Die Mutter lässt sich sauber montieren, mit voller Gewindenutzung. Da so ein lustiges Kerlchen meint die Teile auf Etsy verkaufen zu müssen, habe ich die etwas…
Abdeckungen für Tracer 9 /9GT MT07 neuerer Baujahre die Blinker verbaut haben deren Bild angefügt ist. Ich habe bei meiner Tracer 9GT Lauflichtblinker montiert. Die Löcher der Abdeckungen sind für Blinker der Größe M8 vorgesehen. Ihr…
This is a replacement part for the Nanoleaf Linker - the small connector which joins Nanoleaf panels. I lost a couple of my linkers so I modelled this to use as a replacement. This is the end result after a LOT of iterations to get the…
This is a blinker/signal assembly for the S23 LED blinkers from ScooterSwapShop, found here for $10. To complete this build as pictured, you will need: (2) M3x4 screws (2) M3x6 screws PRINT (1) of each file attached. Printing Everything…
This is a blinker cover for the Kawasaki er6 2012 to be able to mount after-market blinkers. I have no clue if that can fit other Kawasaki motorbikes. Made on Catia V5 Category: Vehicles
Hallo ich habe hier eine Hülle bzw. Lenkradbefestigung für Heschen Kippschalter Konstruiert mit Kabelausgang. Es ist genügend Platz um alles ordentlich zu Verkabeln. Das Objekt muss bei benutzung von sogenannten Gewindeeinsätzen mit…
Achtung es wreden zustzliche Materialien Benötigt: 6mm mal 25mm imbo Schrauben Einschmelzgewinde 8mm Der Ersteller der Dateien übernimmt keine Gewähr für die Qualität oder Fehlerfreiheit der von ihm veröffentlichten Inhalte und haftet…
Update 02.07.2024 - Updated model with a cooler design. V1 - I let the old simple model be available for those that want an easier print. Desgined in a single model rather than the two separete that comes originally with the bike. Mine…
Ich habe an meinem Motorrad Neue Blinker Verbaut. Da ich nicht die Standard Blinker Adapter platten Kaufen wollte habe ich Selber welche erstellt. Ich habe versucht zu verhindern das an der Original Verkleidung etwas bearbeitet werden…
Auf diese Art lässt sich der Blinker flach liegend drucken. Er wird anschließend zusammengeklebt. Ich empfehle aufgrund der guten Haltbarkeit PETG, TPU oder ABS zu benutzen. Print Settings Printer Brand: Creality Printer: Ender 5 Rafts:…
Hier ist eine Blinkerhalterung für LED Blinker für eine Suzuki SV650 Baujahr 2022. Die Aussparungen für die Originalblinker ist zu groß, um die kleineren LED Blinker anzubringen. Daher habe ich diese Halterungen erstellt. Damit kann man…
Ever since I saw handlebar caps with blinkers for bikes I wanted one on my ebike. But I already had these mirrors that mounted into the hadlebar ends: https://pl.aliexpress.com/item/2041222145.html I really like these mirrors, they are…
My base pistol that launched an entire pistol ecosystem. Long, Medium, and Compact versions - buy the appropriate hardware kit. Printed magazines are in the files or compatible with modified nightingale magazines or unmodified AIT 40 max…
When buying a new set of indicators (at least the front ones), those now contain white plastic reflectors inside the housing, which my original GDR-ones for the back of the moped didn't have. So to calm my inner Monk, for the sake of…
es werden zwei Adapter benötigt für die linke und rechte Seite. Da der Adapter symetrisch ist kann er zwei mal ausgedruckt werden. Handelsübliche Motorroller Blinker die auch für den Scooter von IO Hawk Legend genutzt werden können haben…
to fix blinker holder to steering shaft the old one was broken
This instrument is 90 percent recycled material, and sounds good. https://youtu.be/xrYg9vbiBfM A glockenspiel or tubular bells is a percussion instrument consisting of pitched steel pipes cut in lengths to produce notes. The glockenspiel…
Blinkerschutz für Volkswagen Golf 3, Golf 4 und T5 Bus Versionen: 5mm-Version: Passend für die originalen (OEM) Blinkergläser. 9mm-Version: Passend für LED-Nachbau-Gehäuse (z. B. von DEPO). Druckempfehlungen: Material: ASA, ABS oder PETG.…
Really easy to print. No need for supports. This adapter helps fixing the blinker and covers a hole that would be there if you replace the OEM blinkers.
Habe mal einen Satz Blinkergitter / Blinkergrill gefertigt für den Passat 32b / 33b / Santana Die Datei beinhaltet zwei Gitter, einmal Rechts und einmal Links. Die Schräge Seite soll nach innen zeigen. Zur Befestigung werden die Original…
That's 3 models to adapt small chinese blinker to your Husqvarna 701 SM flush to the front mask or to the rear of the bike. Link of the blinker Link of the matching socket to adapt the blinker to a 2021 SM (please verify your own socket)…
Caps for Honda Grom blinker holes when removing blinkers, should fit all years. Blend file included for customization. Category: Other
So I saw several people adding P2 Fender Blinkers to their P80's (850/V/S/XC70) and could not find any instructions or decent way of doing, so I modeled the clips that are on the P80's and epoxied them on the P2 blinkers. I'd rather do…
Reparatur Teile zum kleben-Halter für Blinker vorne Retro Star Print instructions Reparatur Teile zum kleben von defektem Blinker-Halter vorne. Die Hülse ist für die Gewinde Seite gedacht (Bruchstück/e vom Original einsetzen). Die kleine…
Should be an okay replacement for this part, although the bottom side is flat so it's missing the It should be a very tight fit, too tight for rigid materials like ABS, PLA or PETG! Print in TPU!
Kawasaki Vulcan S 2024 Rear Blinker Shroud Rear blinker shroud for 2024 Kawasaki Vulcan S. I can tweak it as needed. If you have recommendations let me know and I can make changes and re upload. Will add photo once black PETG comes in to…
Hole is 10mm, may need some adjustment to your needs
Es müssen für jede Seite je zwei Plättchen ausgedruckt werden und dann gegengleich in die Öffnungen platzieren.
I designed this for my 2015 Jeep Wrangler Sahara Unlimited. I know they will fit other models and years, but I don't know which. It is open enough that you can still see most of the light from the blinker (see picture). The fog light…
Turn signal shell for Cadillac Eldorado 1969/1970 Printing with transparent filament (not crystal clear but diffuse; e.g. PETG). The part may also work on other Cadillac models. Try it out. Blinkerschale für Cadillac Eldorado Drucken mit…
Hallo meine Lieben Busfahrer, ich habe bei meinem Jubimodell alles so verbaut das ich jederzeit meine Camperausstattung ausbauen kann, und meine Sitze wieder einbauen kann. Daher habe ich nach einer möglichkeit gesucht, auch das PV Modul…
Don't use TPU, PETG is fine Selbst die stärkste “Feder” eines Blinkers vom Kotflügel kann nach 24 Jahren nachgeben… Das gedruckte Teil kann einfach über den rest der “Feder” montiert werden und anschliessend ein bisschen mit einem…
Nachdem die Spiegel aus China Müll sind und umgehend kaputt gehen, wer kennt das nicht, hier meine Antwort: Spiegel anklappbar mit Blinker. Die Montage sollte keine Raketenwissenschaft sein, wir sind ja Maker und RC Schrauber. Ich habe 4…
FZ6 Naked Moto LED blinker indicator adaptor hole 10mm Printables in PETG or ASA/ABS Need to print 2 adapter for a single blinker to fill the original hole as sandwitch
Schützt die Blinker bei Transport oder Sturz Gedruckt mit Overture TPU 95A Empfohlene Druckeinstellungen siehe “EPF_Pulse_Blinker-Endkappen.3mf”
Dieses Tool entstand daraus das man die Montagehöhe ändern kann, falls man ein Gepäckträger oder ähnliches verbaut hat und dadurch der Haken nicht nutzbar wird. Durch das Remix ist die Höhe variabel. Gedruckt auf ein Ender3v2 mit PETG,…
I changed all the bulbs out in my Hijet to LEDs and needed to find a new blinker/flasher relay that worked with LEDs. I bought a generic CF-13 JL-02 LED flasher relay on Amazon but the box was too big to fit in my 97' Diahatsu Hijet fuse…
When you remove the OEM turn signals, it leaves a large pocket in the fairings which makes it really annoying for mounting flush mount blinkers, the blinkers I went with just uses double sided tape so I just needed a part that fills in…
Ich habe hier einen Blinkerhalter konstruiert um diese an der Gabel zu befestigen. In die große Bohrung habe ich eine Buchse mit einem M10 innengewinde reingemacht um die blinker dort reinzuschrauben. Der Halter ist für eine gabel mit…
You just have to print the 3 pieces like in the picture (no mirroring of the side part). No support, no infill. Print Settings Printer Brand: Wanhao Printer: Duplicator9 Rafts: No Supports: No Resolution: 200 Infill: 38 Filament: Wanhao…
Seitenblinkerdummys für alle Mitsubishi GTI 16V Modelle. Passen aber mit ziemlicher Sicherheit bis weit in die 2000er Baujahre. Empfehle hierfür am besten einen Harzdrucker zu Nutzen. Wenn ihr dann gedruckt habt ist an dem Originalen…
This is intended to be created in PC and solvent bonded using a polycarbonate solvent. I'm not sure as to the fill.
Remix of https://www.printables.com/model/926200-talaria-sting-front-blinker-bracket with cable passthrough channels
My wife bought me a set of these blinkers (https://www.rizoma.com/en/landing-fr130/?cat=44) ~2 years ago and I couldn't find an adaptor for them (even though Rizoma does manufacture one, some places send you the BMW one instead). So I…
Schließt die Löcher und stabilisiert das US Heck für die KTM 690. Macht das Reinigen deutlich einfacher und hält auch mal eine Rallye aus… ;-). Um das original Rücklicht zu behalten muss ein wenig vom Halter “abgedremelt” werden. Als…
Made simple eliminator covers for stock front end blinkers on scout. printed in ABS 100% infill with ironing on top surfaces. File is 6mm total thickness I cut 3mm off bottom to save time and material. (6mm was original thickness of amber…
Ich musste an unserer Suzuki SV650 Knubbel (2004) die Blinker weiter nach hinten versetzen, damit die Packtaschen passen. Dafür habe ich diese Adapter erstellt, welche die Schräge am Schutzblech ausgleichen, damit die Blinker wieder…
Blinker Bracket for the BMW F650 Made for 1995 model, but might fit others also Made to fit these lights: 2PCS BWS100 Motorfiets Voor en achter Richtingaanwijzer Blinker Indicator Flasher Lamp 12V Universele Modificatie Voor YaMAHA BWS…
Use 4x M3 bolts. Duplicate and mirror the part in the slicer so the cable routing goes to the upside on both sides. Blinkerbase is 15mm, .f3d added if you need to adjust to fit your blinker.
Halterung für Blinker am Ninebot Max G 30 D II mit Monorim Federung Vorn. Beachte “_R” rechte Seite und “_L” Linke Seite. Pro Blinker wird noch Folgendes benötigt: 1x M3x8 2x M3x12 3x M3 Gewindeeinsatz Ich nutze diese Blinker:…
I had this blinkers laying around but the accessories were not good enough for me as they either impede the back light or would be blocked if anything was on the rear rack.…
I downloaded the nice fan duct by user Pasha Linker (from FB group "Flyingbear Tornado Owners" ), but using a 40x40x20 fan the head bumps in the frame so I modded the duct for a lower profile to accomodate the bigger fan. Lots of…
Motor Bike Indicator - Iron Cross with lens. Included are two variants with a longer stem for the rear and front of thw bike I used an orange 12V 1W LED with PCB inside the unit that was fixed with epoxy. The lens cover is also held down…
Da die Originalblinker nur eine innere Platte nutzen, die auch noch unpassende Löcher aufweist, habe ich diese konstruiert. Die Bohrung ist für LED-Blinker mit einer Aufnahme mit 8mm Durchmesser konstruiert. Bitte daran denken, einen…
Passender Adapter vorn und hinten für Blinker mit M8 Gewinde (Ø 6,8 mm Bohrung)
Blinkerdichtung Yamaha DT175mx und weitere Klassiker
I didn't like to mount my phone on the bars or above the dash therefore created this beefy blinker stalk to attach the RAM clamp just above the usb charging port. Have at least 3000 offroad miles on it at this point with zero issues and…
📦 Description Keep your network setup clean, compact, and professional with TPLinker, a custom-designed case that neatly houses both the TP-Link TL-SG108 (8-port) and TL-SG105 (5-port) gigabit switches side-by-side in one sleek enclosure.…
Instructions: Import to slicer and upscale every axis by 105%. Orient so arrows (front) is laying on print bed; no supports needed. Small part, so standard setting with any filament should work.
These brackets are used to attach these (B0CM3GPVG4) indicators to the original mounting points of the E-Odin. They must be printed in TPU and work like the original brackets.
Blinker Bulb Color Cover was created when there was not possible to buy original orange color bulb for my Ford C-MAX. It was simple quick win at the end because price of the orange bulb is three times higher then price of the blank one…
Ich wollte mir für die dunkle Jahreszeit LED Blinker einbauen, entschieden habe ich mich für China Motorrad Blinker mit Lauflicht. Davon gibt’s sehr viele in der Bucht z.B. Artikel 356595529874. Leider bei den e-Bikes ist auf dem Lenker…
Many Classic Mini's have an aftermarket steeringwheel. This tab makes the blinker canceler work again with Mountney aftermarket steeringwheels. Required: 2x Ø3,5 L=25mm Dowelpins Mounting instructions: After printing you will need to…
This is a mounting plate / an adapter for the Suzuki SV650 (S) First Gen (AV) Models front indicator / blinker / turn signal. I wanted to recess my indicators / blinkers by making an adapter for them and in order to do that I had to…
I loat the original barend of my Taito, so I made a replacement out of clear PETG. I fiddled around with the settings and came up with th following: Bone dry filament (I let it dry overnight in a food dehydrator at 50C) 2 perimiters…
Base part for the 20-31003-L Blinker for Trailer, i need it to change leds with led cob strips
Project Description : This project is a great classic to understand how 4 of the most common components used in electronics work: the resistor, the LED diode, the transistor and the capacitor. Components: 9V Battery 470Ω resistors 2x 10kΩ…
I recently bought a MyTier Electric Kick Scooter and am so far mostly really happy with it. By German law you are supposed to indicate with your arms wich direction you go when turning, wich is beyond stupid. You can't let go of the…
Mirror the model to get the left side housing. Print in abs/asa or anything else with high temp resistance. I plan on using abs, vapor smoothing it and spraying chrome spraypaint inside for the reflector coating
This holder is designed to sit in the buffer or crosslinker spots on the Aspect Biosystems RX-1 Bioprinter (1), and hold a 15 mL Falcon tube instead of the default 50 mL bottle. This is handy when testing small volumes of crosslinker, and…
I used WAS W97.1 led so its only for offroad use. Can be attached with original bolt and nut.
Printer : i3 MK3 Rafts : No Supports : Yes Resolution : 0.15 Infill : 100% Filament Material : PETG Translucent orange
I use a 5mm flinkering led and a cr2032 coin battery. First fix the part 2 & 3 together, then put the battery in his place. Insert the led. Verify the good orientation of the led, if not, invert the led. Then, all on part 1 and cherry on…
Barely visible drink can linker Can be used when bulding wall from these types of can (Red Bull etc.)
I recommend using ASA material since it may see rain and will be out in the sun. 4 walls Gyroid fill .15 structural or adaptive for best look
I have broken the holder of the blinker light between the light itself and the chassis, so I made a replacement. For Suzuki SV650S 2003
