Counting matching models…
The cable loops have multiple different sizes 100mm to 40mm in 10mm increments. Sizes 80mm- 100mm will need a brim. To use the cable loops wrap a cable around your hand. Then pinch the ends of the cable loop and slide the cable loop over…
Print approx. €0.30–€0.36 excl. taxPreliminary estimate for one variant
A collection of 26 snowflakes with hanging loops for decoration purposes, all about 9 centimeters big. More big designs ↑ Link: big 23 Snowflakes Smaller, 5 cm, designs ↑ Link: 34 Snowflake silhouette collection ↑ Link: 34 Snowflake…
These are ear plug cases with a print-in-place hinge. There is a large and small size and versions without text on the lid. The closure uses the 5mm x 1mm magnets I have on hand. 0.4mm nozzle, 0.2mm layer, PLA, Sovol SV05
Four 100mm diameter hoops in the XY, YZ, XZ and XYZ planes. The XYZ hoop is at 45°. Hoops are 10mm thick. Each hoop has 7 holes ranging from 7mm to 1mm in diameter. There are also square cutouts at each quarter that are 6mm diagonal…
Wall Mount for the Gecho Loopsynth. Affix with 3M strips.
i added sling loops to the end plate made by SaveYourBacon, and adapted the shape a bit to fit the SALz by ironz. and i added a small text to it. i included the .step so you can remove it if you want.
This is a remix of dancan13f's excellent GPIO and wifi cover. Specifically, it is a remix of his V2 model. In addition to holding both the GPIO and wifi modules, this remix adds loops for zip ties to attach to. The idea is that zip ties…
I like the Ortlieb handlebar bag, but the strap was always getting loose when I didn't want it to. So I changed the mechanism to use simple spring hooks (Karabiner) to attach the strap instead of the open loop construction. You'll need…
This is a face cover to protect the knobs and buttons on the front of your radio when it's packed in a bag or case. This cover only works with the front loops removed (simply unscrew 2 screws on either side, remove the loop, then replace…
Calculation loops I designed this for my daughter who is in first grade in elementary school. It makes it easier for her to understand math. There are 55 integrated tasks that can be solved with the help of the math loop. For preschool or…
Another Underware/Multiboard under desk solution. This time to hold my HP G4 Dock and power brick.
I wasn't happy with the original case that came with my loops. Too much empty space inside. When the elastic keychain holder broke, I went looking for other designs on the internet. I found them all too large, so I made my own. There are…
This 3D model features a set of shower curtain loops designed for secure and smooth hanging of a shower curtain. The loops have opening, ensuring easy attachment to both curtain rod and curtain grommets. Easy installation and removal. The…
Hello again! This is a functional belt buckle from the movie Deadpool and Wolverine If you have any questions or requests, you can comment on this THING. Enjoy:)
Hyundai Ioniq5 magnet board glasses loops. Prints in two pieces. No supports needed. Print both pieces, drop in suitable magnets (magnet voids are 6mmx19mmx20mm). Add a few dabs of CA glue and slide on the top cover. The top cover has a…
This is a dual Aranet4 desktop case to include the CO2 / Temp monitor on the top and the Aranet Radiation monitor on the bottom. In order to strap onto my backpack strap, I added paracord loops on the sides and top. The bottom was left as…
This is a single / simple Aranet4 desktop case. I have included a vented version for the C02 monitor and a no-vent version for the radiation monitor. In order to strap onto my backpack strap, I added paracord loops on the sides and top.…
Models for the Loopster 2.0 GitHub: https://github.com/derrickthomin/DJBB-Loopster-2.0 Writeup: https://www.djbajablast.com/post/loopster-2 Videos: https://www.youtube.com/watch?v=OIm8G2PTo3Q https://www.youtube.com/watch?v=TBZhbrmhNa8
Entire alphabet in individual files. Hanging loops included for easy use. Customizable colors and sizes. Possible Uses : Home decor, children’s rooms, classrooms, educational tools, personalized gifts, party decorations. Customization…
Z axis cable loops Printined at 0.125 for smoothness, but supports can ruin that. Easy print.
This is a remix of another work. My only change was to add loops to allow it to be hung up with ease
A simple remix of EpochPrintWorks ' minimalist BCG case. I added patterning to the cap as well as loops for a 4 mm bungee cord as to attach the two together. Note that the included O-ring should be printed in TPU, otherwise use a size…
Attach anything with a loop to your wall. No supports required. I recommend 3-4 outer layers and preferably PETG for extra sturdiness depending what you're planning to hang from it. Just lay it flat upside down. I needed a way to hang my…
The original design was quite a bit smaller and very difficult to get the hinge to separate after printing. Most of the ones I printed would break. I designed this one to be larger for holding more cables and bigger cables. I also made…
White PLA. cca 5 h of printing . Contains 6x 7 mm and 6x 9mm holes.
Flat version of @Auxeno model to allow for better 3D printing. Now, all you have to do is lay it on its back and give support to the 3 overhanging areas
The lip of the dumbek needs to be removed before installing the top loop. You can optionally add an m5 bolt and nut to the bottom loop to secure it. Otherwise, it can be secured with whatever you're using to tie the dumbek around your…
Single calculation loops. Remixed @3Dimensions Abacus base so that my wife and her colleague can use the numbers individually to teach and allow the kids in their classes to use them when they need help with counting etc. I have removed…
i added sling loops to the end plate made by SaveYourBacon, and adapted the shape a bit to fit the SALz by ironz. and i added a small text to it. i included the .step so you can remove it if you want.
Simple watch band loops for the Venu 2s and 2. Decided to design/print a temporary fix for my partners watch until a new band arrived as there were none coming up in printables search for the slimmer 18mm band of the Venu 2s. The loop…
Ordered my first FPV tiny whoop (air75) and some led strips… No idea what size led strips will arive so I made the gates parametric. Bussy printer so i havent had a chance to print them. Will post when i do. Enjoy!
Examples were printed in TPU, but something more rigid would probably work better. Shouldn't need any supports, all overhangs are 45 degrees.
Nothing fancy here just two friction-fit loops printed in TPU solid (no infill) to allow the attachment of any sort of clippable shoulder strap to allow Mom or Dad to more easily carry that Micro Mini brand scooter that your child…
A loop to hook a carabiner through when you are wearing pants without belt loops. Great for summer wear.
chemical loops are funny and can be used in a wide variety of ways. shake them to make a sound roll or stack the loops to make a game tell us how you play!
This is a remix of dancan13f's excellent GPIO and wifi cover. Specifically, it is a remix of his V2 model. In addition to holding both the GPIO and wifi modules, this remix adds loops for zip ties to attach to. The idea is that zip ties…
Designed it around my DSSRV, should fit the DSSRV2 because as far as I can tell they are the same exact case with the same exact part numbers for the rack ears and everything. I also made these to be a close fit to the standard 17.75"…
I like the Ortlieb handlebar bag, but the strap was always getting loose when I didn't want it to. So I changed the mechanism to use simple spring hooks (Karabiner) to attach the strap instead of the open loop construction. You'll need…
This is a face cover to protect the knobs and buttons on the front of your radio when it's packed in a bag or case. This cover only works with the front loops removed (simply unscrew 2 screws on either side, remove the loop, then replace…
Improved GPIO & WiFi Cover with Antenna Mount I recently upgraded my WiFi module to an ESP-WROOM-02U to allow for an external antenna. While the signal strength was flawless, I also wanted to use my GPIO Hackerboard . This model is a…
Remix of Dani30s keyring adding loops to hold a metal key ring. There is both a square loop and a circular loop depending on preference. I printed with 25% infill and otherwise standard Prusa Balanced settings in PLA.
Modi Loops are an open source method to attach miniatures to a surface. The open source version includes trays that you can mount the loops to so you can hold your minis securely. There's a variation that lets you use the loops inside a…
Remix from the loop earplug carrier from Waffle. Recommended upside down print orientation.
This is the beginning of many more labels to come. I have also added a tool loop to each label of a common diameter of each extension. Grid10 System Description I’ve seen a lot of great tool organizer designs out there, but as an aircraft…
yes, it is another earsaver, but I was not able to find one for my problem. Since we now have to use mostly FFP2 / KN95 mask in Germany, we encounter some brands which are providing very short earloops on their masks. Therefore the…
Cool looking glasses stand I found on Thingiverse. Original post had some little hooks for the glasses stem on the side which I don't intend on using, so I cut them off. While I was in there, I resized it smaller to what I needed, fixed a…
Ever broke a buckle on a bag but the original was sewn in so even if you could get a replacement there was no way to put it in without removing the stitching and sewing it back in? This buckle has a barrel that you insert through the loop…
Imported the Cat Ears file into TinkerCAD, sliced off the bottom few millimeters to get rid of the slot, then added loops for sewing onto a ribbon. Added a little pink acrylic paint, sewed them onto a ribbon then onto my favorite black…
this is just the top of the original case remixed to remove the logo, and a version that fits 6x3mm magnets
In speaking with Doctors they wanted some modifications to the shield: Visor for added face protection. Wider shield for better coverage on the side of the face. Ability to use materials found in the hospital for a strap. We solved this…
Both versions have the same size of loop to slide a zip-tie through at 1.7mm x 4.0mm. One version has a single loop and the other has two loops. Print with 4 walls, which is enough to make the bottom part solid.
Hi! 30 procedurally generated structures ready to print. Info about the algorithm: search #wavefunctioncollapse tag in twitter or check my Twitter profile @ferjerez3d My settings for prints in photos: 2 shells, 3 top/bottoms, 0.2 mms…
4th example with the use of TULAS. The flexible loop connection is made with a few cm's of TPU filament. For screws/bolts Ø3/M3 with sunken head. For more info on TULAS, how to connect the filament and how to use it with your own models:…
Tighten the outer parts to lock the tape in place and prevent it from spinning. Loosen and pull the tape to dispense. I printed in PETG with a 4mm nozzle @ 0.2mm layer height. Probably don't want to go much bigger because of the small…
At just under 2.5g per earring, these are perfect for sensitive or delicate earlobes that don't do well with heavy earrings. I mount them on stainless steel earring wires with a few jump rings. Printing recommendations: Print with the…
Fairly simple replacement parts for my curtain rail that broke off a while ago, was not able to find these in a store because it seems to be an antiquated style, so maybe someone else might find these useful. Added a 45 degree slope…
Simple cable guides for 2020 aluminum profile (6mm groove). Closed or open loop. Fast printing standing up in vase mode. Very strong through. The model is 100mm long so you can adjust Z proportion to get the length you need. Same…
Why and what for. Can be used for cable management or to hang something. Designed to be printed in stacks and used with standard VHB roll (25.4mm / 1in wide). If you like the idea Hit ❤ like, leave a comment, post a pic of the print,…
Make sure you have it orientated correctly as the loops are not the full thickness of the bat.
Background and idea Several buckles of my Ortlieb bike bags are broken and I did not know where to get the appropriate replacement buckles for 25mm wide straps. My bags have only a short strap loop, which I did not want to cut open. The…
A collection of 34 snowflakes with hanging loops for decoration purposes, with a silhouette design. The same snowflakes without hanging loops are here . More 5 cm designs ↑ Link: 34 Snowflake collection ↑ Link: 34 Snowflake collection ↑…
A collection of 23 snowflakes with hanging loops for decoration purposes, 7-9 centimeters big. The same snowflakes without hanging loops are here . More big designs ↑ Link: 26 Big Snowflakes collection Smaller, 5 cm, designs ↑ Link: 34…
About The Loopster is an open source midi controller based on the Raspberry Pi Pico. Unique features are the very satisfying cherry key switch buttons (others use arcade buttons, which are also nice, but much larger and louder), and a fun…
I created an end cap for the Loops & Threads™ Yarn Winder. When winding larger yarn it would sometimes slip off the end. This keeps it stable. It slides on and off with no issues. The walls are thin so it stays pretty flexible.
Here are 11 Snowflake ornaments I made. They have loops to hang anywhere you'd like... happy printing and Merry Christmas! If you like this model, you know what to do... hit that like button! Don't forget to follow! Find us on Instagram…
My Pouch didnt fit perfectly to my Molle webbing. So ive designed an Adapter for Clips in the middle of 2 Loops.
Calculation loops I designed this for my daughter who is in first grade in elementary school. It makes it easier for her to understand math. There are 55 integrated tasks that can be solved with the help of the math loop. For preschool or…
when you insert the inner strap loop through the goggles loop, you'll need to fold the little tab at the bottom and squeeze it through the goggles loop.
This is a print in place case for Loops ear plugs. Note: Tolerance in the hinge is 0.2mm, your mileage may vary if your machine is not calibrated. Requires (Qty. 2) 2.75mm x 5mm magnets for closure.
My daughter has this tiny doll set called "Lalaloopsy." The picnic table has a built in umbrella which broke right where the umbrella meets the table. I whipped up a little umbrella holder that would fit into the table and printed it up.…
Easy to mass produce they can be used to securely screw everything in place forever. I used them for my LED Strip in my Printer Cabinet but there are endless possibility's. The model is part of my Printer Enclosure Project. All models I…
Needed a zip tie anchor to organize a couple of wires for a toolhead board (EBB36). Has an 3mm hole to mount it wherever you have an M3 bolt and adds an anchor point for wires running in an axis parallel to the bolt. Made with 2.5mm zip…
I am using a MultiBoard as a “Valet” to keep my dresser cleaner. This is to hang my glasses from. Press fit in a medium hole of the Multiboard System, both long and short post versions are here.
Peugeot 5008 2009-2017 handgrip for sliding loop in trunk. Print two parts and clik the parts to the sliding loop.
Untested, but a tiny variation to add loops for attaching chains or accessory loops
I really liked the Mini Paracord Winder because of its slots for holding the ends of paracord. But I was concerned that the two large loops at the opposing corners would snag on something as I pulled the Winder out of my backpack. So I…
Another Underware/Multiboard under desk solution. This time to hold my HP G4 Dock and power brick.
