Counting matching models…
This is Wallfinity, the universal Gridfinity wall mounting solution. The purpose of this project is to provide a universal, adjustable, and mostly reusable system for mounting Gridfinity onto walls. Most systems have a few fixed solutions…
Louvers, for a 120mm fan. Print 6 blades flat side down. Keep the heat where you want it.
This is our first winter with our small green house. At night, the temperature will go down to the outside temperature (We haven't added heat yet). But during a sunny day, it can be 120F inside! Even when it is only 10F outside. As we are…
Haven't tested yet. Created blades to sit at about 60 degree open inside for more realistic look. Added a touch jolleos design to jake of all trades design. The thought is to superglue my designed blades into place. Category: 3D Printer…
This is an insert for a boxing glove, designed to make it stay open wider when not in use so that the sweat inside it can dry up. I use it for my Krav Maga gloves. Its dimensions are identical to Isaac Howard's dryer, but mine is…
A tab broke from from one of the flaps on the exhaust hood for my dryer. Although I found several other models on Printables, none quite fit my application. This replacement louver is designed to be 122 mm wide by ~33 mm high, 2.8 thick.…
This Is a template for 45-degree blind dado cuts. I designed it to make this louver for a window. I used 7/16th bushing and a 8mm bit. That way the template slides into the next slot and there shouldn't be any wobble. I'm sure other sizes…
Intended to be used for post-print chamber cooling (ASA, ABS, etc.) when the K1 Max is modded with an internal charcoal filter. I installed the excellent OugleSauce side fan filter mod. If you want, you can reuse that sketchy Creality…
We recently had a dryer vent flap break at my house. Rather than spending $18 on a whole new vent cover, I decided just to make a new flap. *Originally uploaded elsewhere in December 2017, reuploading here
Designed to fit in Artic P14 or any 14 cm PC fans to directional air flow.
I've got a few landscape spotlights that produce an annoying glare when walking by them. Searching a bit, I found the solution to the problem was to place a louver (or louvre) between the bulb and the lens of the spotlight housing. Many…
I chose the "Nuvo Iron" for my shading system, which also works very well. Unfortunately, the sliders and holders are not available separately. However, I needed 2 more and here is the result. I left out the hook for better printability…
This simple hook can be used to hang anything to a louvered door. Simply slide it in place and hang whatever you need. We now use these for keys, bags, and even bicycle helmets! Did you know that louvered or vented doors often have…
Made these to go with my Voron 2.4 Canopy, but should work on any 60mm fan. You will need 2x A332 or any similar 9g Sub-Micro MG Servo, I used Spektrum A332 & A332R(Reversed) servos. You will also need 8x MR85-2RS(5mmX8mmX2.5mm) ball…
Here's a 6x12 passive wall register I designed and printed while adding some ventilation to the 2nd floor. For a passive register PLA will work fine. If you would like to use this as an active vent register i would suggest using PETG as…
Hello, i created asimple solution for hanging things in my closed on the inside of the louvered doors. They are plenty strong even for heavyer backpacks like the Tasmanian Tiger Mission MK2. The used hook is 25mm wide. I offered various…
I am using this louvered vent cover for the exhaust from my Bambu Lab X1C 3D printer. I wanted to use a 6 inch hose so I remixed the model by Simple3D to increase the size. However when scaling up the louvers they got pretty thick and the…
Remixed from design on Thingiverse. I made this design half the thickness and added chamfers to two of the sides to direct some airflow. Print Settings Printer Brand: Ultimaker Printer: Ultimaker 2 Extended Supports: No Resolution: 0.2…
Replacement parts to assemble the Movable louver vent for the Aristocraft RS-3 locomotive.
Use wallmounts from Open Armory: https://www.printables.com/model/413796-open-armory with MDF slatwall/slotwall panels. Access to the edge of the panel is necessary, these are slid in from the end. Two widths provided, full and half…
Simple 45 degree louver to redirect air from a 120mm fan, which can help with airflow if the computer sits right in front of a wall. Can be mounted in all four directions so you can point the exhaust wherever you want. In addition, it…
Tired of those broken flappy unsynchronized louvers on you X300 or X40 center vent? This might help. It is a replacement synch/tab for that brittle broken one that fell apart long ago. (Edit: 2023 update) The files have now been updated…
Two versions: RevD is for louver Revision D (build around 2014). RevG is for replacement louver 2024/25. This limits the movment of the actuator to 90°, to avoid the THC_cond ShurtNoFeedback error
This is my 3rd update to the OpenRC F1 car design. The focus has been on getting airflow into the body to cool the motor and other components. This is remix focuses on the front body vents. Category: R/C Vehicles
There are other flaps available but the ones I clicked on only gave model numbers of vent they were designed for. No idea what the model of this vent assembly is but the louver this replaces measures approx: 1.25" W x 4.75" L, 0.25" D.…
Spare parts for my louvers. I printed with PLA, but better with PETG or ASA Print Settings: No Support
Used this to fix the internal air diverters in my BMW Z4 e85 dash that were broken and no longer adjustable, Replacing is pretty simple, follow youtube directions for how to slide the vents out (simple once you figure out how to release…
A directional louver for a Coleman-Mach RV air conditioner found on the Winnebago Rialta RV. This part directs the cold air inside the cabin. Twelve fins are required for the ceiling distribution assembly mounted inside the coach under…
This is a replacement part for a 1994 Toyota LandCruiser A/C Louver vent. During a recent restoration I found that these parts are not available for purchase and that due to their age, a brand-new replacement louver/vent would have…
Hood louvers for the Axial SCX6. Includes a stencil for cutting out hood material. Print specs used in picture: Filament: PETG Nozzle size: .25
Used for passive air intake in a microscopy dark room, seed germination stations and incubators. The design consists of two parts for easier printing and minimal post processing. The two parts are to be glued together as indicated in the…
We got a brand new Purple Lead louvered pergola and there is no nice way to hang any bird feeders or planters. These pieces simply clip on to the rail, move left and right and can be removed easily without damaging the beams.
The blinds in my room were hanging loose, and inspection showed it was due to one bracket being broken. The other bracket was cracked and soon to break due to UV damage. Looking through all the rooms revealed that the blinds still worked…
The louvers on my dryer vent cover needed to be replaced. I could not find replacements locally or online, so I made my own. I'm not sure if they are a standard size, but they do fit the cover for houses in my neighborhood. The cover uses…
This is a two part print, and it's scaled for 2 140mm fans on the top of a Meshify C
Update 2023-12-02 -Removed fillet from top of V1 bracket as it was causing considerably weakening the bonding using to surfaces using double-sided tape, also the part is overall now thicker. -Did topology studies on both V1 and V2…
The louvers on our microwave exhaust vent were breaking down from years of UV exposure, and rather than completely remove the cover thought to just replace the louvers with a simple 3d print. A UV resistant and somewhat flexible filament…
A simple locking mechanism I made for the louver/jalussi accessory to Volvo 740.
Hyundai I30N FASTBACK side window louvers. (Not tested on I30 (non-fastback), but I don't think they will fit) Easy to print flat. It is advised to use ASA or ABS to prevent warping in the sun. For best results i suggest MJF or SLS 3D…
Parametric air louver for house that can be equip with mosquito net, air filter or close for winter insulation. There is a slot for 2x6mm magnets if needed, but not necessary. Also baseplate is not necessary, but it is if need to add…
Used this to cut even notches in 1/4" plywood and backed with semi opaque acrylic to create a "star wars" style doorway vent backlit with LEDs Category: 3D Printing
replacement hoop flaps for exhaust of dryer vent
Fixing the degraded plastic bracket in the F32RZ/F35RZ series of standing fan. The plastic feet is aging, becoming brittle and eventually flakes off. This bracket piece lacks the internal indents to lock with the metal tubing. But the…
top rib removed for shark fin clearance Category: R/C Vehicles
Take your DIY insect enclosure to the next level Fits 4.5" holesaw diameter Three pieces secure to the lid providing an access port and ventilation. Printed in PETG and 0.6 nozzle 2" style vents here:…
Do you have an older Andersen louvered window with broken or missing brackets? These parts are no longer available from Andersen, but now you can print your own durable replacement. This model was reverse-engineered from an original…
Dieses Modell ist Teil meiner Serie über architektonische Oberflächen . Die Struktur besteht aus horizontalen Segmenten, in denen die Lamellen sanft von einer flachen Ebene in eine geneigte Steigung übergehen. Das Ergebnis ist ein sehr…
Upgrade your ventilation setup with this custom 120mm fan casing featuring active, servo-driven louvers. Designed to dynamically direct or block airflow, the louver angles are controlled by a standard MG90s micro servo. The assembly…
Instead of paying $1000 for the official sun screen blinds for the Mirador Louvered Aluminium Pergola i wanted a cheaper options. So i bought a retractable Side awning from amazon for less that $100 and resting it on the ground you can…
A louver for a venthole of about 36mm Diameter. I reccomend printing the part out of PETG for better resistance outdoors. For mounting you need 3 Nails of 2mm Diameter.
Ich habe für meinen Dodge Challenger eine Heckscheiben Jalousie / Louvers die mit 8mm Schrauben gesichert ist. Da diese ab und an demontiert werden muss zum Scheibe putzen, habe ich diesen 8mm Schlüssel gefertigt mit dem man sie perfekt…
I created this model with the support of AI, based on images of deflectors I saw online. Print Settings Printer brand / model: Bambu Lab P2S (any printer with a 256 x 256 mm or larger bed) Rafts: No Supports: No Resolution / layer height:…
This 3D printable replacement swing louver is designed as a direct substitute and spare part for the original air conditioner outlet flap. Specifically this model (GREE GWH24ACE-D3NTA1H/I) Not sure if it works on other models. The design…
Airfel 9000 mobil air conditioner louver link
A mountable light diffuser for a particular overly bright LED lighting setup. Making the arms shorter should be a viable option as well without heat issues during operations. This variant in white stays under 80F by anecdotal testing.
Louver to motor connecting part The motor opening is 3x5mm Total height is 16mm , length 17mm and depth 7mm Tested with ABS , fits perfectly
Top Louver Vent for the Cooler Master Q300L V2 (should be compatible with V1 as well) The stock top panel on the Q300L V2 has small, widely spaced holes that combined with high density mesh filter restrict airflow significantly. This…
Keep your firearm organized and within reach with this easy-to-print pistol hanger designed for louvered panels. The mount securely supports most handguns while maximizing storage space in workshops, garages, gun rooms, or display areas.…
Airfel 9000 mobil air conditioner louver link
A directional louver for a Coleman-Mach RV air conditioner found on the Winnebago Rialta RV. This part directs the cold air inside the cabin. Twelve fins are required for the ceiling distribution assembly mounted inside the coach under…
I recommend printing them in PETG. They're designed for Dubia roaches and storage totes. For outdoors/attics/sheds use ASA filament and the angled design to keep water out. 0.4 nozzle 0.2 layer height for PLA If working with very small…
This is a Louvered window for the 3DSets model Sakura. Its only one side you will need to mirror in your slicer to get the other side. Category: R/C Vehicles
This is a replica of an existing vent hood, which was damaged while painting the house. The flaps print nicely if they're oriented vertically with supports at the sides and a brim. Bend them a little bit to fit them into the frame. PLA…
I designed this hook to hang stuff from the louvers of an HVAC closet door in my apartment kitchen. It is small and thin enough to slide between the louvers, then rotate to hook onto it. It eliminates the need for more invasive mounting…
Most of the clips needed to mount the louvers are included except for the ones for the center bar.
A duct I made to pull or push air through a louvered door with an 80mm fan. Check out the video here: https://www.youtube.com/watch?v=vQdEbQBt78s Print Settings Printer Brand: Bambu Lab Printer: A1 Mini Supports: No Filament: Generic PETG…
A simple louvered exhaust cover for the Core One & Core One L. Helps keep dust out and heat in. It's not airtight but it does help with chamber heat up time and helps add a few degrees to the max chamber temp. This is designed for 10mm x…
Created a louvered vent for a hotspot enclosure that I'm going to mount outdoors. Printed in PETG.
Made in an effort to reduce fan noise and distribute the air stream more laterally. I ended up placing a dinner plate on top for the desired airflow, so I think I might add that shape to the top. Sliced in quarters and printed in pairs…
This is a replacement air vent vane / louver / slat for Volkswagen Transporter T5 and T5.1 dashboard vents. After years of use, the original vent vanes can become brittle, crack, or break, leaving the dashboard vent looking untidy and…
I needed a wall louvered vent for my inline fan. 2 piece print, no supports needed.
This is a rough & dirty version of a dryer vent cover. A long story short, the previous homeowner added a deck over the dryer vent output on the side of the house. Because of this, I could not add a traditional cover to the dryer vent.…
This grille can be attached to a plastic 4 in. louvered exhaust hood, such as Home Depot's Everbuilt (SKU #1000052123). With short screws, the grille can be attached to the plastic of the hood frame. If the hood frame is weak or…
Threaded vent and a screw on mount for a 12v fan. This is used as an exhaust fan for my DIY outdoor solar generator. I needed a water to exhaust hot air from the solar charge controller and inverter contained in the box, but wanted a…
