Search results: lpl

vinyl wall mount - Schallplatten Wand Halter

vinyl wall mount.

Cute Tiny Articulated Dragon Whelpling

Want a commercial license to sell my prints? Join as a member to my Patreon https://www.patreon.com/c/Salvadori3DArtworks or my Thangs https://thangs.com/designer/Salvadori3D VERY happy to introduce my first fully articulated flexible…

ASW20 Sailplane (micro glider - flyable)

This is a scaled flyable micro version of the ASW20 sailplane from Schleicher. The model was created to be lightweight and printable in normal PLA. Because of it's lightweight behaviour it's a little bit fiddly to get it together properly…

FrameArms13 - girlpla style articulated figure v1 [Base ver.]

Vinyl / Record / LP Holder - Stand - Rack - Schallplattenhalter XL/MK4

Ein einfacher Schallplattenständer, passt für Standard 12" LPs (mit und ohne Sleeves) Größen: 2 Fach: 335mm x 180mm x 338mm (TxBxH) 3 Fach: 335mm x 238mm x 338mm Material: PLA oder PETG Infill: 10% Kein Support - auf die Seite mit den…

LPL Style Locksport Pinning Tray (Medeco Remix)

Lock Pinning Tray (LPL style) by Dr. Lex Remix. Easy to print! There is a small groove in the bottom of the pin slot that allows you to place the little nub on directional Medeco pins. This slot serves to orient the pin as to easily…

Tabletop plant: "SoulPlant" (Fantasy Vegetation 01)

The leaves of this one could probably be made into weapons, so I guess it can protect itself if it has to. It can also provide some cover and protection for smaller units who dare to hide right behind it. ;-) Growing in difficult terrain…

3D Printable Girlpla / Mecha Musume / Megami Device / 30 Minute Sisters / Frame Arms compatible blank figure

DISCLAIMER: THIS IS A HARD KIT. It is a injection molding kit adapted to 3D Printing, not something like Dummy 13 that's designed to be printed. It REQUIRES resin printing to be printed at 100%, for filament printing, the minimal scale is…

Wallplate Bracket / Mount for Caseta by Lutron Pico Remote

I've been working on utilizing Pico remotes to control Zigbee lights through Home Assistant , and I wanted some additional wall mounts for the extra Pico remotes that I wanted to install, so I remixed joshcarter's original wall bracket to…

Decora Wallplate Blank Insert

This is a blank Decora wallplate insert, to cover an empty hole after you remove a device like a switch or plug. Design notes: The depth of the front part of the insert should bring it into near-flush alignment with your faceplate. I've…

Bambu build plate QR Code (brother printer) - 12mm (Updated Textured PEI/CoolPlate PEO)

Updated Textured PEI Plate & PEO cool plate with new QR Code for 12mm label Brother P-Touch printer. It is useful if you have Lidar, so it automatically detects the installed plate. You will need P-Touch Editor in order to open the lbx…

"Bug Lite" - 3D Printed Electric Sailplane (e-DLG / F5K)

Summary "Bug Lite" - 3D printed electric DLG (F5K) with foaming LW-PLA and Carbon Nylon PA-CF filaments for best weight to strength ratio. This release also comes with newly designed skeleton V-tail, integrated electric fuselage, etc.…

Hinge for IKEA BEHJÄLPLIG

That is a reproduce copy of hinge, which is used in the mounting for dishwasher front panel ( BEHJÄLPLIG )

IKEA Behjälplig Suspension

Printed in PETG with 15% infill and supporters.

Dreieck-Schlüssel Triangle-Key Müllplatz etc. 10mm

Easy to print with PETG

Through the Desert (Allplay edition) + Bazaar Expansions Insert

UPDATE 2025-05-10 I have added a “finger cutout” to one end of the original oasis_box.stl for those who would prefer to give up a little bit of storage space in exchange to make it easier to remove this part from the game box. Print…

2-Gang Wallplate - Decora Opening x2

This is a 2-gang wallplate with two decora openings. Designed to match Lutron Claro covers from a distance (same corner radii, but the screws aren't hidden). The Decora openings fit a Lutron Caseta dimmer perfectly with no gaps all around…

IKEA Behjälplig Suspension (more durable)

I printed few parts from original author and I found that the tip is very fragile. I remixed it to be more durable. Enjoy

IKEA BEHJÄLPLIG - Dishwasher Door Mount

Parts for IKEA Behjälplig

Playmobil 30225762 for Playmobil 5568 (Spielplatz, Saeule, Stuetze)

Replacement part (Pillar) 30225762 for Playmobil 5568 This part is not available from Playmobil anymore. Can be printed with PLA but I recommend PETG or ABS/ASA for more stability. Print in 0.2mm or thinner layers. Prints with no supports…

Quick release plate / Schnellwechselplatte (42x42mm) für Cullmann Stative

gedruckt aus PLA, 1,2mm Wandstärke, 17% Füllung, Muster: Dreiecke (mit zwei Linien) Eine separate Schraube zur Befestigung der Kameras wird benötigt evtl. muss der Bügel von einigen Schrauben entfernt werden Ich habe oben (beim Druck…

Elegoo Centauri Carbon Filter Holder for VoxelPLA X Filter/Bambu Labs X1C Filter - Inspired by Uncle Jesse

Larger holder and cartridge designed to fit different filter from the original. This is a Remix of Uncle Jesse's filter holder for the Centauri Carbon. This version will allow you to use either the VoxelPLA X-Filter or the BambuLab Carbon…

Spielplatz in H0/1:87

Hier ist das H0-Modell eines Kinderspielplatzes. Das Modell ist sehr filigran (die Streben der Geländer sind 0,6x0,6mm), läßt sich aber mit einem gut eingestellten FDM-Drucker und kalibriertem Filament sehr gut drucken. Die Teile werden…

Wallplanter 1.16

Ich habe auf euer Feedback gehört und den Abtropfmechanismus noch mal komplett überdacht. Ab sofort gibt es keine Trennlinie mehr auf der Außenfläche, es sei denn das Muster des Pflanzkübels bietet es an. Wie findest du den Mechanismus?…

Bottle-Cap Collector Plate/Kronkorken Sammelplatte

Update 28.07.2025 Recently change my printer and was now able to print a 7x7 plate. Added the lighweight with connectors model some seconds ago! Update 17.12.2024 Added model with connectors. Build the size you want or extend it! / Model…

Cable Pass-Through Wallplate - Single Gang Horizontal

I needed a sideways-oriented cable pass through for my home theater, but none existed. I combined a couple of other models to create a wall plate with a large horizontal passthrough. 14.02.2024: Added V2 which increases the space…

Record Adapter / Schallplattenadapter - Speaker / Lautsprecher

This is my record adapter in shape of a speaker cabinet. Update: Reworked the modell because the given dimensions in the contest are wrong. They say the middle axis is 0,25" which is 6,35 mm. In fact the axis are 9/32" which is 7,14375mm…

SPD-SL Cleat Pedalplatform

This is a Pedalplatform to clip into SPD-SL Pedals to be printed in TPU. Print this in TPU with 0 Top and Bottom Layers with 40% infill and 4 perimiters. with supports Category: Sport & Outdoors

Simagic P2000 Heelplate

I needed a heelplate for my Simagic P2000 pedals, so I designed and printed one. It can be printed in 2 parts (even on a Prusa Mini). You'll need 7pcs of countersunk M6 bolts: M6 x 20-24mm bolts - 4pcs for the 4 corners to fix the plate…

Ethernet Jack Wallplate

A simple Ethernet Jack adapter plate for Pass & Seymour / legrand Ethernet Jack.

spring steel sheet holder prusa ikea lack enclosure Federstahlplatten halter by Retrust December 25, 2020

Ein halter für Federstahlplatten. Print instructions Einfach ausdrucken! 0,3 Layer high.

Pinning Tray LPL Style with Lid

I was unable to find a suitable tray to use with my CI training lock, as most others were too small or didn't satisfy my exact needs. This tray works perfectly with the CI training lock with enough separate compartments for the pins and…

Sailplane - Control Surface Deflection Gauge

DESCRIPTION Control Surface Deflection Gauge for sailplane PRINTING SETTINGS See print profile inside .3mf file for detail

Shelly Plus H&T Wallplate

Wall mount bracket for the Shelly Plus H&T, with the dimensions of a Niko Intense (Belgian) switch plate, can be fixed to standard in-wall boxes with a screw spacing of 60mm. After mounting the Shelly Plus H&T to the bracket, batteries…

Walksnail Schnellwechselplattform - Walksnail quick change platform

Hallo, das ist eine Schnellwecheslplattform für das Walksnail FPV System. Es soll das Welcheseln der FPV Komponenten zu einem Anderen Flieger möglichst einfach und schnell ermöglichen. Das Walksnailsystem wir mittels Kabel An und…

BEHJÄLPLIG dishwasher door clip

Print in PETG or stronger. I printed mine in Prusament PETG @0,20mm height on a Prusa Mini+. It's still going strong after a year.

Wallplate Bracket for Lutron Caseta Pico Remote

This is a replacement for the Lutron Caseta Pico wallplate bracket. I was installing a bunch of remotes and, of course, came up one bracket short... so here's a replacement that has the same basic dimensions as the Lutron bracket. Unlike…

Servoaufnahme Scania S770 Carson Tamiya 1:14 Anhängerkupplung/Sattelplatte

Zwei Servoaufnahmen für den Scania S770 8x8 von Carson Tamiya, je eine Aufnahme für die Entriegelung der Anhängerkupplung/Sattelplatte Update vom 18.03.24: Fehlende Datei für AHK-Servoaufnahme ergänzt

Schnellwechselplatte für Kamerastativ | camera quick release plate

Self-designed, printed and tested. Corrected, and now it fits! PLA-Part is good-enough for the job. Additional components: 2x DIN EN ISO 4762 M2,5 x 5mm 1x tripod screw 1/4''for interchangeable plate (photo screw with folding bracket) ---…

Wallplanter 1.21 (Coins)

Hier ist ein weiterer Pflanztopf für dich, diesmal im Stil von gestapelten Münzen :) Das Modell ist wie die Anderen entweder mit oder ohne Wandhalterung zu haben. Bei diesem Muster bot es sich außerdem mal wieder an den Abtropfbehälter in…

2-Gang Wallplate - Decora Opening / Switch

This is a 2-gang wallplate with a decora opening in the first gang and a switch opening in the second gang. Designed to match Lutron Claro covers from a distance (same corner radii, but the screws aren't hidden). The Decora opening fits a…

AKU Akustik Wandpaneele Halter für Wallplanter

Hi, ich habe eine Wandhalterung für AKU Akustikpaneele konstruiert, an der du meine Wallplanter aufhängen kannst. Die Halterung kommt völlig ohne Zusatzmaterial wie Schrauben etc. aus und beschädigt die Paneele nicht. Außerdem kann man…

Jobo c6600/LPL 6700 enlarger negative carriers 35mm wide to 6x9

simple print in place negative carriers. print in PETG, no supports required. use pliers to hold outside of hinge with carrier main body then snap the pivoting core away. the outside bit and the main body move as one with the hinge…

Lock disassembly tray LPL style

I followed the style of the tray that LockPickingLawyer uses in his videos. Print settings: Any default profile should be fine, but I recomend 0.20mm layer height for smoother fillets. 15% Infill No suports

Schallplatten Ständer

Schallplattenständer für Singles oder Alben

Arm / Calf / Thigh acessories for Girlpla

Some acessories to fit on the arm and leg joints of both my printed Girlpla and original figures. Main figure can be found here: https://www.printables.com/model/1306918-3d-printable-girlpla-mecha-musume-megami-device-30

IKEA Behjälplig frame and wheel

Printed in PETG, 100% infill for stability.

Mercedes Hybrid Wallplug Charger Wallmount

A simple chunky wall mount for a Mercedes wall plug charger. it has 2 4mm holes spaced 50mm apart. The holes have a 5mm countersink for the screws to sit below the back surface. I printed mine on a Prusa Mini+, 0.6 nozzle, .35 layer…

Wallplate for 3 keystones

This is a wall plate-mounted, keystone box for 3 keystones in a vertical position. I originally wanted to use these wall plates , but unfortunately the cable box behind the wall plate isn't deep enough to handle the keystones + rj45…

Through the Desert (Allplay edition) - Remix

Remix of original Through the Desert insert by @Mscottie_467230 Player Camel Corral Colored Camel Majority

European spacers (uitvulplaatjes)

different sizes of spacers used in construction, for example to align the ceiling.

Schallplattenadapter Kegel

Ein einfacher, aber zweckdienlicher Schallplattenadapter. Kann auf dem Teller drauf bleiben, kein genaues ausrichten der Single notwendig oder ein entfernen des Adapters zum Plattentausch. Das Ziel des Modells ist eher der praktische…

Factory Funner Insert - Allplay edition

This is a remix and combination of the Factory Funner inserts by occivink and Pieces. I do not have the cardboard insert, so needed to print all the organizers. I resized some of the inserts for a better fit. This is for the Allplay…

Simple Leviton Decora Outlet Wallplate

I looked around and could only find novelty or special-purpose versions of the decora wall plates, and only for light switches(the outlet ones need to be slightly taller). I didn't want to have to go out to the store to get them, so used…

Camera adapter for LPL 7700 series, Omega/LPL or Saunders/LPL 670XL series enlarger chassis

Converts your old analogue photo enlarger chassis to a copy stand for your DSLR digital camera. Inspired by the product “Copy Camera Adapter for LPL 7700 / 670XL Enlargers”, which apparently isn't available to buy anymore (and which was…

Wallplanter 1.20

Hi, ich habe einen weiteren Pflanztopf mit verstecktem Tropfwasserbehälter konstruiert. Leider ist es aktuell noch kein Wallplanter, da aufgrund der Form des Musters die Wandhalterung mega weit heraussteht und das irgendwie bescheuert…

Wandhalterung Schallplatten Haken multifunktion

Wandhalterung für Schallplatten, auch für andere Gegenstände nutzbar. Supports needed!

Oral B Charger Holder (US plug) with Decora Wallplate Screw Hole

This model is a remix of another that holds an Oral B charger (US plug) but can be physically secured with a screw. I used a longer wallplate screw for the extra depth. Only downside of this version is that if the GFCI trips you'll likely…

80mm Pattress/Back Box for Keystone Wallplate

I recently upgraded my network wiring with some kwmobile branded keystone faceplates I bought from Amazon, but they weren't sized for the UK standard back box. A bit of time in Fusion and problem solved! Prints perfectly fine without…

Lockpicking tray, LPL tray

This lockpicking tray was designed to be similar to the one Lock Picking Lawyer uses. It is easily 3D printable, but also easily CNC machinable. If you are in the EU and want to support my work, you can also get the CNC machined version…

Record Stand - Vinyl/LP Display - Schallplattenständer

Just a simple record stand. For 2 Vinyls or Vinyl + Sleeve. Simple design: no support needed PLA or PETG 15% Infill (or what you want) Printed with Prusa MK4

torso adaptado para accesorios de dummy13 para FrameArms13 - girlpla style articulated figure v1 [Base ver.]

Record Adapter / Schallplattenadapter - Sun clock / Sonnenuhr

This is my record adapter in shape of a sun clock. I printed it in 2 colors for a nicer look. Update: Reworked the modell because the given dimensions in the contest are wrong. They say the middle axis is 0,25" which is 6,35 mm. In fact…

Fanatec CSL Pedalplatten (Ohne Schriftzug auch dabei)

So gemacht das man keine Stützen braucht. Es sind noch M4 Einschmelzgewinde erforderlich. Die Pedale bieten sehr viel Gripp und fühlen sich sehr gut an so das man auch Barfuß nie abrutscht. Drucker : Bambu Lab X1C 0,4mm Düse 0,2mm Layer…

MPX male / female connector holder for RC sailplane, glider

How do I fit MPX plugs into a narrow RC glider fuselage? MPX (Multiplex) male / female plug holder for RC sailplane, glider For installation in 40mm wide fuselages / aircraft body Bracket has inside a stop for the MPX connector Fix the…

Vinyl Record holder wall mount / Wandhalter für Schallplatten

Der Halter lässt sich mit 2 kleinen Nägeln (D 1mm) an der Wand befestigen. Update: Neue Version für Doppel-LPs hinzugefügt. Category: Decor

Record Adapter / Schallplattenadapter - Heart / Herz

This is my record adapter in shape of a heart. Update: Reworked the modell because the given dimensions in the contest are wrong. They say the middle axis is 0,25" which is 6,35 mm. In fact the axis are 9/32" which is 7,14375mm so i made…

Sim Racing Heelplate

Wanted a nice heel plate for my old pedals so I designed this. Can be printed on small printers because of the 2 separated parts. Can be varied in position because of the long mounting holes

Wallplate, Switch

Decorative plate for wall switch. Designed to print face down. Change filament after 1 mm for accent color as shown. See full line of JPM Electrical Plates and Covers: Here

Sail AllPlay Board Game Insert

An insert designed for AllPlay's Sail board game (2023). I really thought it could use an organizer instead of all the pieces jostling around in the box, and the other inserts I found online were for the premium meeple addition which I…

Vinyl Stand - Schallplattenständer

My Girlfriend want a Stand for her little Vinyl Collection so i tried to do my best. Used a few 8x23x160mm Wood Blocks left over from a rocking chair i printed while ago. Of course you can print the inserts, too. Added a File with 0.2mm…

Printed Girlpla alternate shoulder connector

This is a shoulder and arm connector that mounts from the inside of the shoulder. If you glue the hinge inside the cone, the arm connector is unable to fall off like on the original figure. It will not alter anything on the visuals.

Wallplate, Outlets

Decorative plate for wall outlets. Designed to print face down. Change filament after 1 mm for accent color as shown. See full line of JPM Electrical Plates and Covers: Here

Australian Wallplate Standoff

This is a simple, yet effective two part standoff for an Australian Wall Plate. Materials: Part A and B 3d printed 4 m3 bolts 4 m3 threaded inserts This takes 4 threaded inserts that allow the two halves to bolt together. This can go…

Tablet Wall Mount - US Wallplate Format (Nexus, Asus, Amazon)

Wanted to create a slim wall mount for tablets which can be screwed into a lightswitch / junction box in place of a normal plate. Created to maximize the space on my smaller printer (FlashForge Adventurer 3) by printing on the side, at a…

Schnellwechselplatte Rollei C5i

Eine Schnellwechselplatte (ohne Schraube) für den Kugelkopf eines Rollei C5i Stativs (Arca-Swiss-Anschluss) Das Model ansich ist eher mäßig nützlich, weil es entsprechende Platten günstig zu kaufen git, sondern eher als Basis für…

OpenClipsal - Clipsal & HPM compatible wallplates

A simple set of Clipsal / Deta / HPM / clone compatible wall-plates, surface boxes, surface risers and accessories All models have been designed with a 1mm nozzle in mind, for smaller nozzles just increase the wall count to near 1mm for…

BEHJÄLPLIG bottom hinge captive lock

IKEA Behjälplig (Behjalplig) is the only solution to install non-IKEA dishwasher into IKEA METOD kitchen cabinet, but unfortunately this thing will snap/break very easily almost weekly. This part prevents bottom part to snap from the…

Schallplattenadapter Totoro

Remix von Totoro als Schallplattenadapter für Singles. Trotz seiner Körperfülle ist Totoro so schlank, dass er beim Wechsel der Platte stehen bleiben darf ;-)

Wallplate, 2-Gang Outlets

Decorative plate for wall outlets. Designed to print face down. Change filament after 1 mm for accent color as shown. See full line of JPM Electrical Plates and Covers: Here

Switchbacks (by AllPlay) Board Game Organizer

This is a fairly simple board game organizer for the game "Switchbacks", sold by AllPlay. AllPlay is amazing. I have a standing policy of buying anything they release. I've never been disappointed. Also, if you like Switchbacks, do…

Duplo Rüttelplatte

Rüttelplatte für Duplo zum zusammenbauen. Die Griffbreite ist so ausgelegt, dass die großen Figuren sie greifen können. Zusätzlich einen normalen 3x2 Stein.

Deniz Kalpli isimli Kupe Earring heart is name deniz

Deniz Kalpli isimli Kupe Küpe kalp adı deniz

GIRA Centralplate 3-compartment - 2 Versions (Prototype Not Tested)

Prototype Not Tested! GIRA Centralplate 3-compartment 2x different Solid Know Editions. My recommendation for the print settings: Material: PETG Layer: 0.2mm Nozzle: 0.4mm Supports: Yes Alignment: Visible surface on print bed Legal…

Builplate holder, universal size.

Wanted to hang some of my spare 310x320 build plates on the side of my IKEA Alex so whipped up a quick solution that should fit plates in all sizes. It can fit 3 plates (assuming they are less than 2 mm thick) There are also included a…

Merten OctoColor Zentrallplatte Netzwerkanschluss

Merten OctoColor Zentrallplatte für UAE-Einsatz, 2fach Netzwerkanschluss

Wallplate, Dual Switch

Decorative plate for wall switches. Designed to print face down. Change filament after 1 mm for accent color as shown. See full line of JPM Electrical Plates and Covers: Here

The helpless Planter

If you choose to add the floor cracks print it in black filament or paint it. Feel free to adjust the size to your preference. Adding skin paint on the hand and some grey matt paint on the pot will add more effect. Enjoy

Thicker rim Quad Keystone Wallplate and Six Keystone Wallpate

Took quad wall plate into tinkercad. Cut away all but the brim and screw hole borders (this str is included) then in prusa slicer added that to the quad wall plate, Enlarged the additions z dimension till I got the thickness I wanted. In…

Hjulplaceringsmærkat / Dækmærker

Denne mærkat monteres direkte på luftventilen for at angive dækkets placering, f.eks. venstre forhjul (VF) eller højre baghjul (HB).

Bigger wallplate mount for universal spool holder, better for gypsum walls

This is a wall mount for the fantastic universal filament spool holder by PurchenZuPoden. I am using it together with 2.6kg big filament spools (PETG by DasFilament) and it holds strong. Gypsum wall isn't as strong as concrete/brick or…

Dancing Coulple Beads

Clean silhouette of a ballroom duo. All-black base (PLA/ABS/petg/whatever), with raised dress layer for filament change - MMU not needed . Centered hole straight through for string. You can scale them up or (more likely) down, however you…

Wallplate spacer

I love home automation, however since I am renting my house there is probably a good chance that I shouldn't be messing with the electrical. Because of this I needed to find a good way to mount the Lutron Pico remotes over the top of…

Decora wallplate with motion-detector shield

Not too much to say. We moved into a house where a motion-detecting light switch had been installed in walk-in closet. Worked great for the closet, but would also trigger whenever anyone walked past outside closet. If someone went to the…

Gorilla quick release plate with tripod screw (Gorilla Schnellwechselplatte mit Stativschraube)

Gorilla Tripod Schnellwechselplatte mit Stativschraube Projektbeschreibung und Anleitung unter http://cool-web.de/3d-druck/gorilla-tripod-schnellverschluss-platte-kamera-smartphone.htm Video unter…

Simjack Pro Pedal Cover Pedalplatten

Bigger pedals for Simjack. For use with socks very smooth. The brake needs to be heated a bit so it can be formed in the shape of the original brake pedal. Print Settings Printer Brand: Sovol 3D Printer: Sovol SV06 **Rafts:** Doesn't…

Multiconnect Wallplate for Tiltable VESA Mount (for Multiboard)

Added a Multiconnect backplate to the wallplate to make it multiboard mountable. It should be compatible with both 75x75 and 100x100, as they appear to share the same wallplate. The wallplate is generated with the “ Multiconnect Part…

Makita 18V - Angled single batteryholder model and wallplate adapter for 4pcs

There's plenty of holders around web, but I didn't find angled ones that would have easy access to battery level indicator button/display. So I created one. There's model for screwing invidual holder to wall and wallplate to fix four of…

Wallplate, Switch & Outlets

Decorative plate for wall switch and outlets. Designed to print face down. Change filament after 1 mm for accent color as shown. See full line of JPM Electrical Plates and Covers: Here

Vinyl LP Stand - Schallplattenständer

Einfache Schallplattenständer mit Ablagefläche. Die Halter sind für 1-3 Schallplatten ausgelegt. Unterschiedliche Ausführungen. Gedruckt mit Prusa XL und PLA. Printsettings: Support: no Material: PLA, PETG Infill: 10%-20%