Counting matching models…
This is custom GoPro mount for my friend's special order. The idea was to mount GoPro base in front center. It works fine and get a best possible camera angle. I will post better pictures of real print soon ;) Skechup file included - feel…
Deutsche Bundesbahn Guterwagen Gls205 / Gms54 in gauge 1 (1:32). I "borrowed" the roof-shape from the "French Wagon" by dagnall53: https://www.thingiverse.com/thing:2675325 The coupling is a modified version of raby's design:…
I couldn't find a chin mount I liked for my helmet so I made one. The angles of the helmet are very irregular with slightly twisted planes, so it was not easy to get a fit. It's not perfect but very close. It will take some minimal…
ls2 ff800 storm gopro camera chin mount
Halterung für GoPro an dem LS2 Vector 2 Helm.
Camera mount for LS2 Challenger C GT Carbon Size S/M Update: There was a weak spot at the front most element of the mount. Updated file uploaded. Sorry it bothered me with conventional cam arms that the camera has almost always filmed…
El Master Explica Youtube montura gopro para casco Challenguer LS2, con opcion de pegar con cinta doble cara o tornillos directamente en el casco e incluyo el boton de seguridad por si se safa se quede colgando
Also, sorry for the bad photos, and I just realized how filthy my helmet is… taking care of that now! I've seen several models of mounts for this helmet, but paying 90€ + shipping for a 10 g part seems a bit much. This is the 7th…
This is a tray made to hold valve lifters and pushrods from a Chevy LS engine. Useful during tear down and rebuild process to keep lifters in proper order so they can be returned to the same bore/cam lobe. This was original work on my…
You will need double sided tape as 3M vhb f.ex
Standard clip mount. Note - there is about a 1.3mm gap at least with my clips, which I had from a old cheap chinese cam, I rectified that gap with a two 1.2mm pieces of rubber (10x35mm) and now the fit is perfect. Printed with PLA, PETG…
Ich habe den Adapter für meine Makita DLS211 erstellt.
Gopro mount for helmet LS2 MX701 explorer.
Print flat side down. Insert M5 nut. Update 30/07/2025: Extended mount so camera can be angled up more.
The drawback of this arm is that the screw securing the arms can break. I have designed a replacement for this screw.
For my model railroad i needed a way to mount a LS2596 DC-DC converter in a nice way. The case is designed to snugly fit the converter. The holes for the in- and output wires nicely fit 1mm2 wire. 3D PRINTING SETTINGS Parts should not…
ecambio para visera de casco Ls2. instrucciones: -imprimir en 3D -sumergir durante varios segundos en agua hirviendo y colocar sobre el casco para dar la curvatura ideal. -montar las piezas.
The Makita DLS211 / LS1219 / LS1219L / LS1019 / LS1019L - SHOPVAC CAMLOCK adapter is an accessory designed to connect the dust extraction port of the machine to the SHOPVAC CAMLOCK vacuum system. Best to use together with this part:…
First, unscrew the extraction nozzle from the hose. Then, screw the 3D-printed adapter onto the hose. Remove the counterpart from the machine (by loosening the screw). Finally, insert the printed adapter together with the suction hose…
The Skelter5 LS20 is a lightweight version of the Skelter5 V2. This frame comes in around 119g compared to the 130g of the V2 frame. Frame specs. 20mm stack mounting only 20mm and 25.5mm rear mounting 5mm arms 23mm building height 20mm…
Keychain from Farming Simulator 22/FS22 Bambu PLA Matte Ivory White Extrudr Light Blue Schlüsselanhänger von Landwirtschaftsimulator 22/LS22
Der LS22 Feld Helfer hilft die nächsten Arbeitschritte für dein Feld alle zu behalten und zu koordinieren. Füge die Nummer der Felder auf der Map des Spiels ein oder schreibe/ klebe welche auf das Tool. Ich füge nur die Felder in…
Wall mounts for Buffalo LinkStation LS210DG series Print Settings Rafts: No Supports: No **Resolution:** 0.2 mm Filament: Prusament PETG Category: Gadgets
My father's Brady TLS2200 is the label maker he has used for 20+ years. He has built up a good collection of labels and ribbons for it. They no longer make the labels for it and haven't for years, but even if you have the labels for it,…
The parts needed to connect the wheels to the car frame, including the car to car connector. Also has wheel caps (two tone) to secure the axle in place. Need support for the wheel2car for the wheel assembly. May require some drilling…
Got fed up of having to keep on Hot Gluing my buzzer back to the quad frame... This mount slides on the the rear supports... Decided to cut the support hole in half, so as to avoid the rotation of the props and therefore not interfering…
One of the first things I decided to design for one of my quads to try out my new 3D printer... Made it using ABS, as that is all I have... Had a few crashes, holds up well so far, no damage at all... Version 2 holds up a bit better...…
Fixes a snapped visor clip, allowing for the visor to continue being used.
Recommended to print with PETG or PC. Requires (2) M3x10 screws and (2) M3 brass knurled insert nuts. Using with this camera boom arm: https://amzn.to/3Ln1d0t
faite des parade avec votre chat,amusez vous avec lui. -PETG/PLA/ABS/ASA -100% remplissage -2murs incompatible A1mini
Mounting plate for MicaSense DLS light sensor.
The red pull tab on my LS2 Rapid III helmet fell off for some reason so I designed a replacement. Printed in PETG with 40% infill and seems to hold very well. Tiny part, very fast print.
The drawback of this arm is that the screw securing the arms can break. I have designed a replacement for this screw.
Fixes a snapped visor clip, allowing for the visor to continue being used.
The holder is designed to attach the DJI Osmo Action 6 camera to the chin of the LS2 Valiant helmet (FF399). It can fit GoPro, Insta360, DJI, SJCAM cameras. It is attached to the chin of the helmet with a high-quality double-sided 3M…
The mount is attached to the cheekpiece with Velcro. If necessary, I can quickly remove the mount. The DJI Mic Mini 2 can be attached using a clip or by inserting a DJI magnet into the mount. The magnet is easy to remove, see the…
Adapter to mount a Samsung LS24D-Series Monitor on a standard VESA 100x100 mount. Print the Base, the Pin and the Shell separately and use a threaded insert in the base. Fit the Shell around the Pin and screw the Pin onto the base. Some…
Customized version of http://www.thingiverse.com/thing:1417160 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=1417160 Instructions Using the following options: filter_diameter_mm = 73.5 drive_size_inches…
Remixed KatKompany's mount to add a couple zip ty holes for some extra security.
This is a VESA mount specifically designed for the Samsung LS27C350 monitor. I created this design to allow the monitor to be mounted on a standard VESA arm or stand, improving ergonomics and freeing up desk space. The mount has been…
