Counting matching models…
Why: I have a lot of troubles with getting all the parts needed for making this engine. Moreover, some parts just does not work very well, causing mechanism destruction. I'm sharing modified parts that allowed me finishing that project.…
Designed by: ericthepoolboy Hardware Kit and Build Support by MakerRx The LS3 is a modern classic - big displacement, no nonsense, and built to perform. This 3D printable scale model captures its mechanical soul with moving pistons, a…
Remix from different models and inspirations. CraigAT23 LS xx Engine - Motor Build v001 | 3D CAD Model Library | GrabCAD . ericthepoolboy Chevy Camaro LS3 V8 Engine - Scale Working Model by ericthepoolboy - Thingiverse . Joko Engineering…
This is a new Engine Holder for the LS3 Chevy Engine ( https://www.thingiverse.com/thing:1911808 ). I modeled a new holder to support the weight of he engine (more than 3Kg with accessories, and there are still many elements to add).…
This is Headers Remix for the LS3 Chevy Engine ( https://www.thingiverse.com/thing:1911808 ). The features are : . Replacing factice screws by holes for real screws . Gaskets . Exhaust collector for driver and passenger sides Print…
Wanted so bad to have a mocked up Twin Turbo LS3. :) Remix of the Manifolds to add the Wastegate https://www.thingiverse.com/thing:4787340 Remix of the Outlet Pipe and Clamps https://www.thingiverse.com/thing:4633524 Remix of the Engine…
Couldn't find a suitable kit around for an important project car at work and most of the printable header mock up kits were difficult to print or had trouble with strength or used more plastic in supports than it did on the pieces. The…
This is Oil Pan Remix for the LS3 Chevy Engine ( https://www.thingiverse.com/thing:1911808 ). The features are : . Replacing factice screws by holes for real screws . Gaskets . Dry Sump Connector . Plugs . Holes for electric components…
This is a Main Belt Tensioner for the LS3 Chevy Engine ( https://www.thingiverse.com/thing:1911808 ). Not having plans, all these pieces were designed from photos found on the net. Despite the constraints of 3D printing and accessories, I…
This is Ignition Kit extension for the LS3 Chevy Engine ( https://www.thingiverse.com/thing:1911808 ). The Spark Plug is made by Thebush1951 ( https://www.thingiverse.com/thing:3896150 ). Print instructions Printer Brand: Prusa Printer:…
This is Accessories extension for the LS3 Chevy Engine ( https://www.thingiverse.com/thing:1911808 ). Print instructions Printer Brand: Prusa Printer: I3 MK3S Resolution: 0.15mm Filament: Geeetech PLA Silk silver, black, bronze and yellow…
This is Timing Cover Remix for the LS3 Chevy Engine ( https://www.thingiverse.com/thing:1911808 ). The features are : . Replacing factice screws by holes for real screws . Cam Sensor . Cam Sensor Holder Release 09/12/2019 : New version of…
This is Valley Plate Remix for the LS3 Chevy Engine ( https://www.thingiverse.com/thing:1911808 ). The features are : . Replacing factice screws by holes for real screws . Gasket Print instructions Printer Brand: Prusa Printer: I3 MK3S…
This is a Starter extension for the LS3 Chevy Engine ( https://www.thingiverse.com/thing:1911808 ). The starter Drive Gear is a remix of the original. The electric wires connected to the solenoid are factice. The electric wires connected…
This is Main Pulley extension for the LS3 Chevy Engine ( https://www.thingiverse.com/thing:1911808 ). Print instructions Printer Brand: Prusa Printer: I3 MK3S Resolution: 0.15mm Filament: Geeetech PLA Silk blue and silk silver Print…
Print with ABS/ASA/PETG for hot-car resistance. The fit is about half a millimeter undersized. Cup-diameter set to 70mm
This is a tray made to hold valve lifters and pushrods from a Chevy LS engine. Useful during tear down and rebuild process to keep lifters in proper order so they can be returned to the same bore/cam lobe. This was original work on my…
A custom cover I made for my Enderwire mod, but can be used for any application of the LS350. Be aware that there seem to be versions with 24V and 12V fans out there. POWER SUPPLIES ARE VERY DANGEROUS EVEN WHEN NOT CONNECTED TO POWER FOR…
This is a printable pushrod for ericthepoolyboy's ls3 engine. You can 3d print this instead of having to buy the steel ball and m3 rod, each one is only about a gram with 100% infill. Will require cutting the tiny little side supports…
Remixed a couple LS3 exhaust manifolds together to get the top mount configuration.
I was able to find block off plates for the exhaust ports and water pump ports, but not the intakes so I designed one!
Main body needs to be printed with support, due to the complex inner shape. My model is combination of PC-CF main body, PETG stator + rotor and PLA for cover. 0,2mm layer height, 3 perimeters.
A hard case for the NetAlly LinkSprinter LS300 Pocket Network Tester. I bought mine used so it didn't come with the soft protective cover. I hope to improve on the original soft cover by including a space to store the two AA batteries…
LucidSound LS35X Rotating hinge for earphones Deutsch Hallo zusammen ich habe auf Anfrage eines Bekannten ein neues Drehschanier für den Lucidsound LS35X Entwickelt, da dieses sehr anfällig ist und sehr schnell ohne große belastung…
Logitech C920 Spacer for DellS3220DGF Curved Monitor
decided to make a Cleetus McFarland/motion raceworks edition valve cover for Ericthepoolboy's awesome 1/3 scale LS3 Category: 3D Printing
Small scale working replica of the Hörmann HLS 381. Tested at 125PSI, it is the loudest siren I have built. Approximately 2 minutes run time on a 12 gallon tank. It is recommended to keep the .STLs grouped as they are in the folders when…
moved the intercooler pipe inlets from the back to the sides for clearance when installed with ls3 front accessorys, orginal design would hit the ac compressor and altenator pulleys
I want to present a hinge designed as orginal part. The original hinge becomes deformed over time, so it must be replaced. Orginal part for that model are unavaible. I printed it in PET-G and ASA - I see no differences in short tests, i…
Printed with an Artillery Sidewinder X2 PETG @ 240° , bed @75°, cooling fan @35% 0.28mm layer height 4 wall lines - 25% cubic infill 60mm/s print speed / 50mm/s for walls → 3h30 of print Maybe add 0.5% to 1% scaling in X/Y to better fit
remixed from https://www.thingiverse.com/thing:2997104/files, basically just cut model to make a set of gaskets
Eakins WD105 320x zoom (my bought here https://pl.aliexpress.com/item/32703396905.html?spm=a2g0o.order_list.order_list_main.5.58a21c24ZYIUbd&gatewayAdapt=glo2pol) and Mechanic LS3 Led ring (my bought here…
Hi there! Welcome, I’m excited to share this special project with you. Introducing Littletools3D, a digital collection of toy tools specially designed for children, perfect for 3D printing. This project gives both parents and gift-givers…
To be able to fit a wall mount behind a Samsung Odyssey G8 32", this shim will creative the space that is needed to fit a wall mount or an arm that is even just a tad bigger than 120x120mm. This will most likely fit all monitors using…
The holding pins of the soundbar are distanced 260mm for my model.
Protector for the carton spools of the RePLA from Smart Materials 3D. 3D printed parts that are inserted into the spool, to avoid wear of the spool holder. This wear occurs due to friction with the edges of the cardboard spools. Print…
My Father asked me to design an Adapterplate to use his GST 18V-125B on the PLS300. Since i couldnt find anything from other designers, i designed it myself. There is just the normal Plate that is the same as the Original that comes with…
On GMs LS3 there is a breather that goes behind the intake manifold to the valve cover. Should be printed out of flexible filament. I used TPU and it seems to be holding up to the temperature and blow by gasses just fine. I ran into heat…
Why: I have a lot of troubles with getting all the parts needed for making this engine. Moreover, some parts just does not work very well, causing mechanism destruction. I'm sharing modified parts that allowed me finishing that project.…
This package includes all paid add-ons for the Chevy LS3 engine. Rather than purchasing the add-ons separately, this package gives you a 20% discount on the total purchase price of the paid add-ons. For detailed assembly instructions for…
Adjusted to make the mounting holes tighter so it doesn't sag. I had to make it wider to fit this sound bar with spacing for the mounts of 10.25 in. Printed it with the mount holes pointing up and rotated 45 degrees (corner to corner) to…
A replacement battery cover for the PLS3 Laser Level. Its a friction fit cover and holds on pretty well. Printed at .15 to make sure hight is accurate and used supports from build plate only for the little tab.
