Counting matching models…
Big thank you to Printed Encounters who made the awesome original wolf model, Wolf Running (https://www.printables.com/model/131947-wolf-running). **UPDATE ** I've added a snowy base that works for either wolf, I'm quite happy how it…
Update! I split the tail of the jacket from the pelvis, now you can create more dynamic poses! For those who have already printed the pattern and want to update I put the updated single pieces and some pieces that maybe you have to…
Mount the Lupine Piko Light to your GoPro compatible accessories with this adapter. I recreated the original Piko mount shape to allow for the same range of up/down swivel and added the GoPro base to it. Try to print this in a horizontal,…
This mounting plate was used to fit a Lupine Blika headlamp to a race drone via four M3 bolts. Should work for other front click headlamps as well. Printed in Formfutura TitanX ABS.
It is stiffer and more robust than the flimsy original mount Youll need 4x M3 bolts for assembly
LUPIN GANG - FIAT - WALL ART
Needed to attach a Lupine Mono to my gopro mount. Attention the GoPro Part and the screw hole is a very tight fit because i wanted to sand it down to have a smooth surface and to provide maximum stability. If it slides in smoothy from the…
Adapter to mount a Lupine Rotlicht bike light to the Garmin mount. Use the original philips screws to attached the adapter to the light.
FUJIKO - LUPIN 3 - WALL ART
eine Halterung passend für Lupine 7,2V Akkus - siehe Bild Befestigung mit 3M Klebeband, hier im Velomobil
A keychain with the stylized face of Lupin III Small, medium and large variants Un portachiavi con la faccia stilizzata di Lupin III Varianti piccolo, medio e grande
mount your Lupine Piko to your bike's handlebars using rubber bands (e.g. those that came with your Garmin)
Mounting plate for lupine head lights. original by chrism. added slots to sides for use with velcro straps or rope
I designed this handy battery plug to seal off the contacts of my Lupine Battery, when I have a spare in my jersey pocket. Just to prevent them from corroding due to contact with my sweaty back…
Diffusor / Streulichtscheibe für eine Lupine Pico LED Helm- / Stirnlampe. Das Licht ergibt nicht mehr einen einzelnen Spot sondern wird sehr schön gestreut. Ich habe zwei Varianten gemacht: einmal mit zwei Lagen und einmal mit drei Lagen…
Daisuke Jigen - Lupin iii - Wall Art
Goemon Ishikawa XIII - Lupin 111 - Wall Art
Replaces a broken Lupine Piko headstrap holder. The upper part is based on princess_cuddlecake GoPro adapter Printed with 100% infill and supports everywhere.
Spacer for Lupine SL AF 7 with GoPro adapter, so that the angle no longer adjusts or wobbles during the ride. Print settings: 0.4 nozzle 0.15 no supports
to integrate the bt remote controller in trampa wand: https://www.prusaprinters.org/prints/56637-tamp-wand-and-lupine-remote-sleeve Lupine Piko: https://www.lupine.de/products/helmetlights/piko
Hi, this is a small handlebar mounting for the Lupine Neo headlamp. It consists of the mountings R+L, optional spacers and TPU washers… (Diameter of the handlebar: 31,8 mm) You need additional screws (M3 x 30 mm, hex) and 2 nuts (M3).…
Even when the lamp is off, it draws a little amount of power due to the wireless receiver. With this plug the cable don't wiggle around because you can connect both ends but they are not electrically connected so you don't waste any…
Ho creato al versione funko del personaggio di Lupin dell'omonimo cartone animato
Diffuser for Lupine Blika headlamp. Works as well as protection during transportation or when mounted without use, e.g. while mountainbiking before sunset. The main reason for designing this product has been the very strong red light of…
Cover with Logo to protect the glass while in your bag and an adapter to keep the quick clamp in place. The Adapter can pe placed inside the cover while not in use. Here a link to the lamp:…
If you no longer want to mount your Lupine battery with Velcro but with a sturdy frame mount, then this model is the right one for you. Instructions: Print the model. It is recommended to print the frame mount vertical Unscrew the velcro…
FUJIKO & LUPIN WALL ART - FRAMED
A simple clip that allows Lupine battery/lamp cables to be attached to regular Bowden tubes. This keeps the cockpit tidier and prevents cables from dangling around and getting in the way. Printed in PETG it firmly snaps onto the cables,…
Ho creato il personaggio di Jigen Daisuke di Lupin 3 versione funko
https://www.lidl.cz/p/lupilu-stupatko-k-detskemu-kocarku/p100359376
Copied from original: Even when the lamp is off, it draws a little amount of power due to the wireless receiver. With this plug the cable don't wiggle around because you can connect both ends but they are not electrically connected so you…
LUPIN 3 - GRINNING HEAD - WALL ART
Ho creato il personaggio di Goemon Lupin 3 versione funko
If the holder for the lamp cannot be mounted because it collides with the saddle, it's possible to gain a few millimeters in height to mount it securely. Lupine C14 Backlight: https://www.lupine.de/products/tail-lights/c14-mag/
Ho creato la versione funko del personaggio di Fujiko di Lupin III
Ho creato il personaggio Inspector Zenigata Lupin III versione funko
Lupine Piko helmet mount: https://www.prusaprinters.org/prints/57152-lupine-piko-mount-for-urge-drift-helmet Trampa wand: https://trampaboards.com/the-wand--trampa-vesc-remote-control-c-1524.html Lupine bt remote:…
This Mudguard replaces traffic safety with a dry butt. Just replace your rear Lupine C14 Mag light with this fancy magnetic mudguard. It's designed in two parts for easy replacement. It features a nice and fancy feeling magnetic mount.…
You need a Velcro Strap to mount the holder to your helmet. These Straps are usually sold to hold batteries on fpv drones. I have also included a base plate design that could be used to design other mounts. I've used this a couple of…
A protective cover plug for Lupine Bicycle Light Batteries to printed with TPU. If you are an owner of an Lupine SL AF you also might be interested in a protective lamp cover (also printed in TPU) - This can be found here:…
Besitzer eine Lupine Stirnlampe wie einer Blika oder einer Piko haben eine der stärksten und zuverlässigsten mobilem lampen am Markt. trotz der sehr guten Frontclick-Schnellwechselplatte gibt es aber keine zufriedenstellende Lösung um den…
Ersatz für einen zerbrochenen Lampenschirm einer LED Lampe.
Tight fitted holder for "Lupine BigBen" bottle battery. Use with 30mm velcro strips and M5 screw. Print instructions: Supports enabled High Infill (>60%) Increased Walls PETG
Cover for a Lupine SL AF lamp head to protect the glas when storing it in a bagpack. Print with TPU filament.
Ho creato un rilievo che raffigura i personaggi di Lupin III e incorniciati come una piccola cornice
Skadis mount for Lupine SL Grano bike light
Custom drill bits for Lupilu toy aku drill. Vlastní bity pro Lupilu aku vrtačku z Lidlu. Přiložený i step file pokud si chcete udělat vlastní bit/tool. Nutno tisknout na stojáka, upínáním nahoru. Supporty pro samotné upínání nejsou potřeba.
The standard holder is not really compatible with larger or aero handlebars, so I quickly drew up a design for 1-2 zip ties. Should be compatible with all bluetooth remotes, tested with a Blika remote. Recommended to print on the side in…
always use supports and double check files incase there are any errors
Lupine C14 Mag Docking Station for IKEA SKÅDIS This docking station is designed to hold a Lupine C14 Mag on an IKEA SKÅDIS pegboard and makes charging the light quick and convenient. The original Lupine charging cable can be routed along…
Tight fitted holder for "Lupine BigBen" bottle battery. Use with 30mm velcro strips and M5 screw. Print instructions: Supports enabled High Infill (>60%) Increased Walls PETG
Ulomil se nám původní háček u dětské kuchyňky a tak jsme si vyrobili podobný. Můj tisk: na ležato, ať je pevnější Support manuálně vyznačený na středu spodní hrany PETG použity 4 perimetry Zatím vše drží a funguje
Ersatz für einen zerbrochenen Lampenschirm einer LED Lampe.
Design Concept The model replicates a roof component for an engine room, designed as a spare part for a specific toy or scale model building set. It features open slats for aesthetic similarity to the original design. Purpose This model…
Ulomil se nám původní háček u dětské kuchyňky a tak jsme si vyrobili podobný. Můj tisk: na ležato, ať je pevnější Support manuálně vyznačený na středu spodní hrany PETG použity 4 perimetry Zatím vše drží a funguje
