Counting matching models…
NOTE: After reading this paper on the effect of Tail Dihedral on stability, and experimenting on my design, it seems that it is a great idea to angle the Horizontal Stabilizer into a negative dihedral (anhedral). Or in other words, for…
AquaFlyer: The Ultimate Floating Mini Frisbee Thank you to PCBWay for reaching out and sponsoring this project:
Have the burning desire to conquer the skies? Then you're not alone. The pioneers of aviation risked their lives to learn how to control their barely flying contraptions. You don't have to risk yours to re-imagine their early feats with…
6mm diameter, 3mm height magnets hold the two halves of the Flyer together. As a display piece they are optional. Use a piece of wire to hold the Flyer over the base at a height and an angle you like. Blender file included. Print the two…
The Delta Flyer Commissioned in 2375 & built by the stranded crew of the Starship Voyager. Able to accommodate 3 crew onboard, with several formidable armaments. Model is not my own however I could not find any Delta Flyer models here so…
Welcome to the huge update to my delta 3D printer the Delta Flyer! LDO Kit Pre-Order!!! Other Approved Vendors Official Delta Flayer Manual Quick Start Guide 3D View for build assistance This is a much sleeker delta 3D printer that now…
Foam Board hybrid RC plane designed to help teach my grandchildren how to fly (interpret that as strong but it won't bother me if I have to make multiple). It has an under-cambered wing, so it is a slow flyer (which is also good for…
(Have a look at the ‘ Stable glider V5 ’ It should glide much better.) Differences: Added Winglets and a rudder, also scaled down to 140mm so the model is quicker to iterate and print. Changes made: Thinning two channels on the wingtips…
Latest design here!! THIS IS THE OLD LEGACY VERSION!!! I set out to design a 120mm build area mini delta 3D printer. Introducing the Delta Flyer the best delta in the quadrant! Specs: 115mm round x 115mm Build Area! Klipper Firmware…
The Wright Flyer was the world's first powered airplane. It was built by Orville and Wilbur Wright in 1903. On December 17, 1903 he had his first real flight. Orville Wright flew 260 meters in 59 seconds. I've always thought this plane…
A simple smaller stand for flyers up to A5 size This is a bit larger and more stable, we have enlarged the compartment for more presentation material, and raised the front for a possible logo or title. Attention, the size of the back…
aircraft based on the Wright Flyer I 1903 suspended print, to also represent some of the tie rods present in the real model. relatively simple print, the pieces are joined with small pieces of filament, as shown in the photo. To be extra…
Print without support 0.2mm (PLA or PETG) Imprimé sans support en 0.2mm (PLA ou PETG)
The Printoptions in the files are for wood filament
Let it rip! Just like a bayblade once you let go, the spinning disc at the top will soar into the air! This will only work if the ripcord is on the left side of the box and you are pulling it toward yourself.
Flyer stand for A5-flyers. Size L: 120 mm, H: ca 120 mm, D: 100 mm.
A scan of the first manned airplane built by Wilbur and Orville Wright, from the collection of the National Air and Space Museum. Originally uploaded to the Smithsonian 3d digitization archive .
Support pour carte de visite et Flyer (Format A5). Business card et Flyer (A5 Format) Holder. Paramètres d'impression / Print Settings Marque / Printer Brand : Artillery Imprimante / Printer : SidewinderX2 Buse / Nozzle : 0.4 mm Radeau /…
This is a lace weight flyer, which lets you spin at higher speeds. This can be useful for high twist lace yarn. I designed these parts so no supports are needed. Here is more info on the EEW 6.0: https://www.dreamingrobots.com/
A flying propellor printed as a giftcard
The digital revolution is here! But our college and lab are still very much fans of trifolds for communications. Our trifolds are designed for US Letter. We wanted a way to wall-mount display some of our trifolds. We very much liked the…
Fantastic original design by Julien Jeanroy - May 21, 2019. My printer was too small and scaling the model down ended in disaster. I split the model and with only two dabs of super glue you can have the flyer on a smaller bed. Connection…
Simple flyer stand. It is printed without supports.
A5 flyer, advertising leaflet box
This is a bass drum riser for a 14" bass drum such as the one included with the Tama Club-Jam Flyer kit. The OEM riser for that kit (part #BLLJ) does not seem to be available anywhere, so if you lose or break it then this should do the…
The Next Evolution of Bellow Blasters! You may have played with air-launched toys as a kid, but now you can MAKE them! Bellow Blasters propel vehicles with a powerful puff of air! This time, Bellow Blasters take FLIGHT! Yes, it flies!…
Flyerhalter für Flyer DIN Lang (105mm x 210mm) Sehr leichter Druck!
This is a remix of Flyer 1903 by alienkim. I simply split the model into four parts, so that the wings could be printed in white, the framework in brown, and the motor/chains/propellers in some sort of dark metal color. After you print…
A sign that reads NO SOLICITING NO CANVASSING NO RELIGIOUS GROUPS NO FLYERS OR JUNK MAIL Printed with the default 0.2mm quality settings in Prusaslicer.
Business card & flyer holder. Printed without support, PLA. Business cards: 85mm x 55mm Flyer: 146mm x 105mm Print instructions Category: Office Summary Business card & flyer holder. Printed without support, PLA. Business cards: 85mm x…
This compact, 3D-designed disc is built for accuracy and strength, guaranteeing smooth, steady flights every time. Whether you're at the park, beach, or just chilling in your backyard, the Mini Flyer is portable and suitable for all ages.…
1903 Wright Flyer Model remixed at 115 percent scale, std 0.20mm.
Printed on prusa mini and mk3s+ speed 0.2 no support.
Ein einfacher Ständer für Flyer aller Art. Etwas Massiv ausgelegt, funktioniert aber gut.
Material Print 4× ribs (or add more thin ribs), connector, tail and nose 13cm paper or foil 3 skewer ∅ 3mm 4 × rubber bands tape Assembly Put 2 skewer through the 4 ribs and space them equally. Ribs are asymmetrical NACA 2412 profiles -…
The safest way to store a profile foamy is to hang it by the propeller. You can fit quite a few planes in a small space with this method. Print two hooks and one plate. The hooks slot into the the base from behind. Uses a #8 flat head…
Flyer Display for DinA4 & DinLang
Flyer Stand Printed without support in PLA. Two versions are available; one with 3 comparts and one with 4 comparts. Attributes: Inner-Size: 106 mm wide and 25 mm length Wall Thickness is 2 mm Beginning with the second compart, the bottom…
I use organic supports but keep them off the sails except for the lower edge. There are also supports from the boom to the water the boom to snip off. I usually add a tiller extension after printing.
This is a Remix “ Swoosh! The electric tea light Flyer” Design by @DrKronos_646245 Hello Everyone I modified the original design by adding the inscription NASA and colored the space shuttle. I only provide Flyer_bottom.stl and…
Perfect for receptions and other desks! Simple and fast. If you need this for A5 format, simply scale the A6 about 1,44 or 144% up. Printer settings: 0.2 - 0.3mm layer height 10 - 15% infill no supports
Sortierer für DIN Lang Flyer. Zweimal gedruckt passt es perfekt in eine 40x60cm Eurobox.
This is a really fun Philadelphia Flyers hockey puck that you can display in your house or even play hockey with! Print Settings Rafts: No Supports: Yes **Resolution:** any Infill: 30-50% **Filament:** any pla/any black and orange…
This is a simple horizontal flyer holder (A5 Format). Made for a big pack of flyers to be shared at events.
No supports needed, but it may need brims for optimal adhesion.
Atuvos holder for e-bike FLYER GOTOUR 5 to mound underneath the frame.
After the wheels of my shockflyer broke I needed a better replacement. This is the fully customizable replacement part, designed to be light and strong. It can be adapted to many setups (diameter of wheel and axis, height of hub and…
Pedestal for the 1903 Wright flyer by Julien Jeanroy Original Flyer: https://www.thingiverse.com/thing:3645112 Split flyer for smaller print beds: https://www.printables.com/model/390547-wrights-flyer-1903-split-for-smaller-beds-prusa-mi…
Here are for some diffrent heights and widt.
This is a trolling lure head meant to mimic a flying fish when pulled behind a boat. Rig it with your favorite 6" - 8" squid skirt and a 0.5 oz egg sinker and an appropriate hook. Excite the bite with THE SALTY FLYER! Pulls great,…
You will need a 8x22x7 common skate bearing. Print the disc with only 10% infill to minimize its weight (disc volume is a mere 0.25 in3 if printed at 10% infill). Print the disc with the arrows pointing toward the bed. Print the bearing…
I have a need for a pocket to hold quarter-sheet flyers that I cannot attach as it needed to be removable for storage.
Updates 13.02.2023 V2 Release added minor changes to improve printing added front flaps to prevent leaflet from falling off Print Settings Printer used: Creality Ender 3 V2 Filament: PLA Nozzle: 0,4 Supports: No Resolution: 0,25 Print…
This realization allows to present flyers in a beautiful wooden stand. The format of the flyers used here is 12cm wide and 21cm high. The plates used are multiplex poplar 3mm thick. The project was initially realized to properly present…
I made a pedestal for 1:50 scale 1905 Wright Flyer (Glider) made by @Avgjo_427529. Thanks Avgio for the pretty model.
Broke a wheel on a vintage Radio Flyer red wagon. Could not buy a new one so I set about replicating it in CAD. We could not get the tire off the old wheel without further damages so I decided to simply draw a new center. Used a Dremel to…
(English follows) Logo bien connu au Québec, Canada pour empêcher de recevoir de la publicité inopportune dans sa boîte aux lettres. Le modèle est conçu pour être imprimé en 3 couleurs : blanc, noir puis rouge. Le changement de filament…
Hockey pucks with Philadelphia Flyers logo. Logo protruding, another in engraved style. Side knurled pattern versions also available. Enjoy! Check out other pucks in my collection:…
Overview This chibi mindflyer is a stylized, compact miniature blending adorable proportions with classic eldritch features: bulbous head, tiny tentacles, and a small brain prop. It was designed primarily as a decorative figure for…
Replacement pedal for what I'm guessing is a Radio Flyer “Ready to Ride Folding Trike", classic folding tricycle for kids. It had ~ 8mm diameter pedal axle. Modeled in Tinkercad (finished in Fusion) using just the broken pedal without the…
Flyer bases 2mm x 4mm peg style 45mm diameter for greater stability Different Sept Symbols to choose from optional text "for the greater good" in tau script The vertical spacer needs to be printed on its side to maximize strength,…
Be sure to drop on by for your turkey!
A rear flyer bearing for Ashford Traditional spinning wheels. Open design allows you to easily snap in and remove the flyer. I printed this with 15% infill and no supports. When spinning the flyer can exert considerable forces on the…
Philadelphia Flyers Oversized Necklace Logo that I designed. I hope you enjoy!
PETG was used since this will be exposed to the weather. No supports are needed, and a color change is included in the .gcode file. The FreeCAD 1.1 file is included if other fonts or wording changes are desired.
My take on the ripcord flyer blades for the amazing thing 3867577 from thjelmfelt with the following design goals: better looks use a proper air foil slightly more weight on the outer ring to increase rotation energy proper twisting of…
My kids have a Radio Flyer Landspeed that I made a little faster. On the maiden voyage, my 4yr old drove it right into a curb in the neighborhood which immediately sheared half the teeth off of the pinion gear in the right side…
its to be printed at 0,2 layer height. there are 3 base layers (be carefull, differnet slicers gave me differrent layer numbers even with the same layer height), and 2 letter/image layers. you should change filament colour at the begining…
The Prym Vario pliers are a tool that allows you to press a variety of buttons, rivets and the like into fabric. Prym supplies you with standard pliers - and then only adds small plastic parts to adapt to the specific part. (See:…
I wanted a version that would slip in to the “hollow” hole insert for the Honeycomb Wall Organizer so I could move things around more easily. This slips in snuggly so it won't slide out, but you can pull it out without too much trouble.…
There is a plastic (maybe nylon) bushing that wears out and gets sloppy on the swivel function of the front wheels on the Radio Flyer “Deluxe Family” plastic wagon. At least on mine, it made it difficult to turn the wagon especially when…
Un simple support pour mettre des flyers au format A5
A larger Flyer for the Majacraft spinning wheel is sometimes called a plying flyer. This is a work in progress, but it is close enough to share. If this is useful to you please post pictures, thank you! I also have a bobbin that fits.
Philadelphia Flyers logo created with HueForge. You do NOT need a multicolor printer for this. Everything is done with filament swaps at set layers. Follow my profile for more team logos as I will continue adding more. Print at 100%…
Nurgle accents for Arvus Lighter like flyer. Category: Vehicles
shockflyer spinner for APC 3D slowfly propeller. Fits perfectly into the hole of the propeller and can be fixed with a small drop of super glue.
It would be nice if you post your make. Thank you
We've had a Radio Flyer Kid + Cargo EZ Fold wagon for several years and the handle was never comfortable to use. It doesn't put your wrist in an ergonomic position. I wanted to replace the handle with a swivel but its riveted on and…
This is a simple and easy to print stand for about 50 flyers of DIN LONG format. The inlay for the flyers is slightly bigger than the standard DIN LONG format and can keep flyers with a with of up to 10,6cm. This total height should not…
This is a ring type of flyer, created to be used as a test bed for a scientific investigation. the prompt is to collect data to make a claim on how the factors that affects its flight. students will be able to add paper clips, and make…
Philadelphia Flyers NHL team golf ball marker (25mm diameter by 2mm height with 10mm spike). Usage Place on the green to mark your golf balls location when it is in the travel path of a golf ball further away from the golf hole. Printing…
I wanted more light on my Delta Flyer, so I added a single Neopixel to the effector with a simple printed mount that uses the two holes intended for an accelerometer. I used this LED from AliExpress I use a tiny bit of double sided foam…
Give a flyer the second chance! Unwanted flyer can be stored in this organiser to be reused later. Advantage of this design is that it can be used for example under the kichen desk or in wardrobe. Of course this print can be used in…
The P-38 model from scale-parkflyer.de is a unique little shockflyer model, yet the kit you can purchase on their website lacks a few parts needed: the rudder horns and the motor bulkhead. So I designed these parts to be 3D printed with…
I modeled a EJ head gasket that you can print so you can slide it under WRX's wiperblades. The fullsize models are a 1:1 scale of an actual EJ head gasket. The half size ones are 1:2 scale. The models labeled “logo" have the r/WRX…
A boomerang printed with Tpu and 30% infill fly's amazing and scale it up or down any size you like.
This worked well made from Nylon, though I wouldn't be afraid to try them out of other plastics. In a worst case scenario, they wear quickly, and and need to be replaced again.
Inspired from the Thing http://www.thingiverse.com/thing:33102 i wanted to see if it is possible to make an 100% (or so) printed Parkflyer Started at 1st of Jan evening the maiden Flight wasnt done till 6th due to weather so Build time is…
Ich möchte Euch hier Räder für die beliebten RC-Slowflyer zur Verfügung stellen. Die Felgen hab ich aus petg- und die Reifen aus tpu liegend gedruckt und mit ein paar Tropfen Sekundenkleber verklebt. Die Teile brauchen keinen Support. Das…
Due to the skadis hooks, some kind of support is necessary. I've used normal supports with a small (2mm) brim to keep the base of the support attached to the main part. As there is a small (1mm) chamfering around it easy to remove the brim.
My wife loves this modern version of a Radio Flyer. The white wheels have turned to brittle mush. When one broke I replaced it with this wheel. You make 2 pieces and glue them together with Duco cement. Fusion360 files shared below.…
dont forget to like and show your make please printer: ender 3 pro filament: PLA nozzle size: 0.6 (sizes smaller are recommended such as 0.4) supports: none adhesion: skirt recommend going into slicer settings and hiding seams into…
Someone requested a bottom panel mod to the delta flyer, so here it is. The center piece needs 3 heatsets and bolts the panels together with 3x M3x10. You'll need to tap some threads in the extrusions to fit the panels, preferably with…
A single flyer for your games of Battletech, Polyversal, or other 6mm/8mm tabletop scifi wargames. If you like this model please check out the rest of the set over here...…
I have wanted to print a car for my train for some time, and finally decided to “bite the bullet” and give it a go! This was designed in Fusion360 with some help from NetFabb. Added BNSF logo (Burlington North Sante Fe). PS: May require…
A single-piece, 28-35mm sci-fi flyer for your tabletop miniature games. nonPareil institute is committed to building better futures for adults with autism through technical and work-readiness training and social engagement activities.…
Here is the Logo free variant uploaded, it says “time to refill” in the holder when it´s empty and “take me home” on the front plate. This flyerholder was created for my company (Sodex-Innovations) for a trade fair. Therefore is the Logo…
