56 models
This harddrive holder for the compact case Inter-Tech IM-1 / Sama IM01 has four 3.5" HDD drive slots and is modular (you could print just the lower two first). The individual drive holders are screwed together by a couple M3 screws. It is…
Print approx. €1.51–€1.85 excl. taxPreliminary estimate for PETGSource material: PET
Trackball: https://amzn.to/46RovXb or https://www.protoarc.com/products/em01-advanced-wireless-rgb-trackball?variant=40089402474585 It's a good replacement for Logitech MX Ergo. More sensitivity settings, support for 3 devices and USB-C…
I wanted a box to store the MPD-P906/MDP-M01 lab supply that had the same size & shape as my TS101's box. I couldn't quite get it the exact same shape, but the footprint is the same as the TS101 box. I made this to have a thin adhesive…
Antivibration legs I made this mod wery long time ago. First for Tevo Tornado and they proved themselves well, not only significantly reducing the noise of the printer, but also positively affected the print quality, since they removed…
A simple holder for the camera unit of the "Momcozy Baby Video Monitor BM01". Depending on where the bed is, you don't always have a surface nearby to put the camera on. So I designed this holder to be hung on the side of the baby's bed.…
Broke the SFX PSU Bracket that came with the case so I made this one, looks much better anyways. Leaves just enough room for a 25mm thick fan on top.
!!! New version is available https://www.printables.com/cs/model/756752-krux-naos-sama-im01-reworked-v2 !!! This is version is archived only and there will be no more updates. V2 is now active !!! New panels and fan brackets with better…
This is a compact sliding handle for Swann Morton SM01 heavy duty craft knife blades. It makes a nice pocket knife. It is much slimmer than the ones using Stanley utility knife blades. The slider is asymmetric to accommodate to the shape…
I bought this practical MP3, video, radio player to easily play my own music on Alexa devices. But I didn't like that the device was just lying around. I decided to design a holder for the MP3 player so that it is easy to use and can be…
Very simple battery cover for the Tecknet EWM01832 mouse. There are already supports under the spring locking tab, but you'll need to add supports under the tabs on the narrow end. Clearance is at 0.1mm on the supports already on the…
I made this simple handle to carry my SAMA IM01. It utilizes the back 80mm fan mount UPDATE 10/8/2024: After many month of lugging my PC to and fro, the handle still held up very good . Ultimately , I went with 40mm M5 screw with 2 thick…
I needed a different way to mount the Aqara Roller Shade Driver. Så I drev one up i Fusion and printed it. I works flawless, but then agagin it's not part of a NASA rocket going to the moon.
Este modelo se creo basado en el archivo de referencia de le tienda de Etsy de Elana Walker.
A replacement handle for the Momcozy brand baby gate model MCSSAM01 (now discontinued). Successfully printed and tested. I used 100% infill and organic supports. You can probably get away with less infill: the weakest part is definitely…
Important notice I will make some change in the model to reduce the gap of the bottom row but the model is totally usable. This model isn't related to the fantastic project named also ASK55 by Paradigm. If you want a end-game keyboard,…
This is a tower cooler spacer I designed for my Sama IM01 using a DeepCool AK400 Cooler. It bridges the gap between the rear cooler fan(25mm Thick) and the rear of the case to bring fresh air directly from the rear into the heatsink.…
This is a holder for a Mercury MTM01 multimeter, the holder can be put on a Ikea Skadis or other Ikea Skadis compatible boards. Tell me if you want a version without the hexagons.
Hi there, This is a Apple Standard Keypad case who use a cutted ASK plate (M0116 and M0118) This project is related to the ASK60 keyboard case : https://www.thingiverse.com/thing:4013453 Parts that you need ASK : Alps Switchs, keycaps,…
Gridfinity 3x5 bin to store the TACKLife DM01M Multi-meter. Has a bottom pocket to store the test leads, so that it does not clutter up. See photos.
Third person FPV mount for the wltoys k989 (will fit other models) using a FTX cam01 FPV all in one camera. Camera mounts on the rear of the base plate using the two unused screw holes. Print Settings Printer Brand: Creality Printer:…
A replacement for missing ball cover on an FM Towns FMT-M0105 mouse. Print with support.
Disclaimer: with this you are going to be dealing with AC. By using this model you take full responsibility. This is a simple electronics box for Kemo Power Control module. Has a hole for the potentiometer so it can be adjusted with a…
Hello, I needed for myself, an easy and simple cable holder, I needed an easy and simple cable holder for myself, so I created it and now I'm sharing it for you. It is simple, spacious and easy to assemble. It is allocated for one 3x20…
Replacement bushing for the interface between the pole & the gas-spring arm. Ripped dimensions from an original. Category: Replacement Parts
It is 1:1 (as close as I was able to go) replacement for Ulanzi FM01 filmog heat shield. I am planning to use it as a base design for another accessory attachments. Print with automatic tree support on 0.2 layer height and should be…
This is a convenient piece for making a clean conversion of Apple's m0110 and m0110a keyboards (and, by extent, any other keyboards supporting the Macintosh Security Lock ) to USB type C. I suspect that you've come to this post, knowing…
This is a mount to put an 8BitDo Ultimate C or any other XBox like controller onto the front of the SAMA IM01. It works by sliding onto the sheet metal of the front panel (~2.5mm).
With balljoint for adjustability. Case fits a GXIVISION IMX298 USB Webcam but can be redesigned.
I printed these in PLA, make sure the front one isn't over the exhaust at the top. I made the bottom hooks pretty wide to accommodate leaving the included folio cover on the back, feel free to make it a little tighter if you want. Highly…
I needed a new foot for my blender. This one does the job. It fits in my model vm0103 blender just like the one I lost. I don't know if it is compatible with other Vitamix appliances. Print settings FIlament: TPU Supports: No Brim: No…
Wear a mask sign M016 according to ISO 7010
a wall box for Aliexpress moisture meter to be glued https://www.aliexpress.com/item/1005005532078659.html
Compatible With Dimension One Neck Flex Jet Pillow Carrier Rail, 2 Needed. DIM01510-607G
Hi there, We purchased a mobile for our baby and found there was no way to effectively mount it on the bassinet. So I took it upon myself to design a new mount for the bassinet. It works brilliantly and is easy to install. The pole 3mf…
Case is made with a mount designed for use with a model from another author.
Hi, I designed a simple cable holder under the table for two USB 3.0 type A-B cables. I have two USB cables pulled from the server to the bracket. This one is nicer :-) It is attached with one screw. Happy printing. My print settings:…
This is a clip to extend the side panel of SAMA IM01 by 6mm It was designed to avoid interference with the side panel when trying to install Deep Cool AK400 Digital in this PC case. Please remove the original and replace it. I think it…
This is a tablet / portable monitor holder for the Sama Im01. It screws (3x M3 screws) into the hole spacing of the steel cover. My tablet (MiPad 6) has a magnetic back, so it stays nice and secure. However, if you intend to use it with…
IMPORTANT UPDATE : there is a V2 of the spacer that provides way more stability (just make the bar 90 degrees off from those 2 posts just like the V1 version) it it prevents the blade from oscillating about the x-y plane over those little…
A mount to attach the Momcozy BM01 baby monitor to a 24mm bar on the Snuzpod 5, reusing the existing mounts that come with the baby monitor. Requires: 2 x 5x30mm wood screws (this is what I had, so I designed the base around this) 1 x…
Sleek retro-modern 3D car model — high-polish metallic blue coupe, ideal for renders, real-time viewers and 3D printing. Clean topology with separated meshes (body, wheels, trim) for easy texturing, baking and slicing; PBR-friendly…
printed vertical using an x1c and with petg-cf filament. these were the sm01 blades i used . material usage about 7-8 grams with default 15% infill. 13-14 grams with 100% infill. just having the plug seemed to be good enough to hold the…
Gridfinity Kingma BM015-FW50 with little recessed pocket for USB cable. Niche, but you never know, someone may need it.
I wanted to put my fog machine in a big pot to create the effect of a steaming pot of soup for a theatre production. This fits into the top of the Ulanzi Filmog Ace FM01 portable fog machine and disperses the fog outwards instead of…
Holder for the ryobi TVM01 dremel/rotary tool. Uses Standard M3 screw to attach to the wall. Before you get your hopes up, it was made in F360 and afaik you can only change the parameters in Fusion, sorry but I don't know OpenSCAD, yet at…
A simple holder for the camera unit of the "Momcozy Baby Video Monitor BM01". Depending on where the bed is, you don't always have a surface nearby to put the camera on. So I designed this holder to be hung on the side of the baby's bed.…
I needed a different way to mount the Aqara Roller Shade Driver. Så I drev one up i Fusion and printed it. I works flawless, but then agagin it's not part of a NASA rocket going to the moon.
Sleek retro-modern 3D car model — high-polish metallic blue coupe, ideal for renders, real-time viewers and 3D printing. Clean topology with separated meshes (body, wheels, trim) for easy texturing, baking and slicing; PBR-friendly…
This is a mount to put an 8BitDo Ultimate C or any other XBox like controller onto the front of the SAMA IM01. It works by sliding onto the sheet metal of the front panel (~2.5mm).
Level up to something a little harder to prickle your brain!
Small little hole plug to fit into the keyboard hole within the M0110 body.
Mount to hold a 60% pcb within an apple m0110 keyboard I used for my custom project. has built-in standoffs to screw the pcb in with standard m.2 screws. Can print in one piece if the printer is big enough.
Apple mouse, model M0100, at 1:4 scale. prints in 3 pieces. Category: Computer
This is a replacement shell created for owners of original Lisa computers who can't find the original (and very pricey!) mouse for their machines. Using this shell, you can convert a standard M0100 mouse (shipped with the Macintosh 128k,…
