P
Printableskunaa
M3 hex screw and nut (M3x10, M3x15, M3x20, M3x25, M3x30)
Print resolution: 0,05 Supports: NO Rafts: NO Material: PLA
- Downloads
- 9,719
- Likes
- 383
- Rating
- 4.45
Search results: m3x1
Counting matching models…
P
PrintablesPyroguy096
M3X10 Socket Head Screw
Customized version of http://www.thingiverse.com/thing:193647 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=193647 Instructions Using the following options: outer_diameter = 14 thread_step = .5…
- Downloads
- 1,341
- Likes
- 35
- Rating
- 0
P
Printablesreemo3dp
Drilling Depth Stop using DIN912 M3x10
Print Settings Layer Height: 0.2 Flat Top vs. Angled Top The flat top version has nicer lettering and is more neat, but one might prefer an angled top to avoid damaging wallpaper.
- Downloads
- 966
- Likes
- 295
- Rating
- 4.94
P
Printables3D Galaxy
BOLT AND NUT M3x10mm
Bolt and nut M3 x 10mm Lenght: 10mm Diameter: 3mm
- Downloads
- 438
- Likes
- 20
- Rating
- 0
P
Printables3D Galaxy
BOLT AND NUT M3x15mm
Bolt 3 metric, star, thor, torx, nut, plain Bolt 3 metric, star, thor, torx, nut, plain. Lenght: 15mm Diameter: 3mm
- Downloads
- 407
- Likes
- 21
- Rating
- 0
P
PrintablesOscar Matthews
M3X10 HEX SCREW WITH A BOLT AND A WASHER
a M3X10 hex screw, you should print it with a 90% infill.
- Downloads
- 350
- Likes
- 14
- Rating
- 0
P
PrintablesGeekware
Prusa XL Nozzle Scrubber Brush Holder for M3x10 Flathead Screws
Printed with PETG filament, 0.4mm nozzle, 20% Grid Infill, 2 perimeters, 0.2mm layer height. Requires qty two (2) M3x10 flathead screws, qty two (2) 3030 M3 T-slot nuts, qty one (1) brass bristle ¼ inch pen wire brush with 1/8 inch shank.…
- Downloads
- 74
- Likes
- 13
- Rating
- 5
P
Printablesacetous
Custom roll holder (M3x10 screws) for werner_h's filament drybox
Custom roll holder for using M3x10 screws and nuts. The screws and nuts are completely countersunk.
- Downloads
- 54
- Likes
- 8
- Rating
- 5
P
PrintablesBeau
Center Hex Nut and M3x12mm; Threaded Spacer
I used an M3 locknut in the middle instead of the designer's flanged nut. I made the side cutouts deeper. This lets you use M3x12mm on the sides instead of M3x14mm which is uncommon. I added M8 threads to the spacer. It fits very well. I
- Downloads
- 24
- Likes
- 1
- Rating
- 0
P
Printableslainsnavi
Sovol Filament Dryer SH01 - Filament Guide Taller with M3x10 Screw Remix
I had difficulty with the original model (the M6 bolt broke while installing), so I ended up creating adapters to make it work. After using it for some time, I decided to make a proper remix and make a few other adjustments to print from…
- Downloads
- 12
- Likes
- 3
- Rating
- 0
P
PrintablesLukasBo
UltiMulti Core One Leg with standard screw M3x16
deeper holes for the standard m3x16 screw from the original Leg's
- Downloads
- 9
- Likes
- 1
- Rating
- 0
P
Printables
Custom roll holder (M3x10 screws) for werner_h's filament drybox
Custom roll holder for using M3x10 screws and nuts. The screws and nuts are completely countersunk.
P
Printables
UltiMulti Core One Leg with standard screw M3x16
deeper holes for the standard m3x16 screw from the original Leg's
P
Printables
1/4" Pegboard to M3x16 Anchor
A super quick print that allows you to put a M3x16 bolt into ¼" pegboard. It's great for mounting things that already have mounting keyholes on to pegboard. This thing is way stronger than it looks. The secret to this model is that as you…
P
Printables
MK3S+ X tensioner M3x12 screw
Remixed X idler tensioner for MK3 / MK3S X idler with tensioner so you can use a M3x12 hex socket cap head screw instead of the 16mm shaft.
P
Printables
M3x10 SCREW
M3x10 screw, needed for a model!! BE careful WHILE turning, or it will break!! warning!!!
P
Printables
My M3x10mm Hex Socket
Customized version of https://www.thingiverse.com/thing:193647 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=193647 Instructions Using the following options: type = bolt head_type = hex drive_type =…
P
Printables
M3x16 Spacer
I needed an M3x16 Spacer for my Raspberry Pi PoE Shield. It's not much, but it mine :) Printed it in PCTG with a 0.4 nozzle and 0.2 layer height.
P
Printables
M3x10mm Washer Cushion
A very small (5mm diameter) washer cushion for an M3x10mm Hexagon socket head screw. I couldn't find one so I made it in TinkerCad. I need these washer cushions for my Creality Ender 3 XE-Axis Assembly. There are two versions: 5mm outer…
P
Printables
2020 extrusion brace for M3x10 screws
In the slicer it might tell you that the part is too small and it will ask you if you want to change it to mm or inches. If it does click yes. This will be the same for a lot of my 3D models.