Counting matching models…
An improved version of this model is available at: Hundreds of Metric Hex Screws Version 2 The screws are inspired by DIN 933 / ISO 4017 metric screws with hexagonal head and long threads. The standard screw design has been slightly…
Somehow I keep loosing these adapters, so here is a 3D printable set of anything I could think off. Obviously print them in a colour that doesn't allow light to come through, black is a good choice. PETG seems a good choice, it is a…
M48 Cyclone Spiral Boot Knife Knife inspired by the M48 Cyclone, featuring two interchangeable blades with a three-cut spiral design. The sheath can be used as an additional handle, resulting in two Cyclone knives.
A 4-in-1 adapter solution for the Dwarflab Dwarf 3 smart telescope using magnets. It has built-in: 2 inch filter adapter Bahtinov mask Lens shade Dew shield The filter is screwed on the bottom of the shade so that it can benefit from the…
A Hi-Res M48 x 0.75 dust cap for your 2" astronomy gear. Screw the ring into a cap and you have a male threaded cap. Print it in 0.1mm layer height and you get a super fine thread. I had to scale the ring down to 99% in the X-Y axis in…
M48x0.75 threaded dust caps, with both male and female side, for astronomy. These threaded dust caps are useful for astronomy cameras, telescopes and adapters. This thread size is often called "Wide T-thread" or "Wide T2-thread". This…
Did you order an M48 Barlow lens from Aliexpress? Did they ship you an M42 lens and then stop answering emails? Never fear, this is an M42 to M48 lens adapter. This works with my Amscope microscope. Print instructions Print in PLA with…
Best printed flat, this is the strongest position!
ZWO Seestar S50 baffled light/dew shield for use with 2-inch (M48x0.75) filters. This baffled light/dew shield is an interference fit and slides into place. I've added spring-loaded tangs to help to grip the Seestar. Remember to remove it…
Adapter for Skywatcher Evolux 82ED / Canon EF - usable for every telescope or flattener with M48 ending. Tight threads, so It does not wobble. Material: PLA or PETG, but I would recommend PETG, depends on temperatures while you shoot…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
I was having trouble finding a Sony E adapter short enough to get the 53.6mm backfocus my coma corrector wants (without tilt), so remixed this Sony E mount adapter to include a M48x0.75 female threaded barrel with enough threads for…
I made this adapter to screw it onto my also self made rotator to attach it to the telescope. The adapter has builtin supports so you don't have to print them, just place the 2 inch part onto the buildplate with the M48 threads facing up.…
This is a simple hook I created that will hold up the discharge chute on a Ryobi RM480e riding mower when it is being stored to prevent the chute from taking up excessive space. It fits into the slot next to the control panel, and will…
For the SeeStar S50 automated telescope - a screw together filter holder for standard 48mm X 0.75 pitch thread astronomy filters like the Lumicon DeepSky filter, with a dew shield and dust covers for both ends. The dew shield screws onto…
My Shimano M485 had one of the pistons quite stuck, which resulted in one of the brake pads being completely worn out rather quickly. I used this to keep the other piston (the one that still moved) in place and to then exert pressure on…
This is simple little adapter for the back of the Mak to turn it from unusual M44.5 to more standard M48. Made it to be able to put my Astro Physics CCDT67 as close as possible to the hole. I printed it without supports, did get a bit of…
Adapter ring for my "Will Strubin Wetzlar" binocular microscope to fit a standard M48 light ring with its M49 thread. It fits very very thightly. Follow print instructions. Print Settings Printer: VORON V0 Rafts: No Supports: No…
Many owners of Ryobi 48v electric riding mowers (RM300e, RM480e and RM480ex) have now upgraded their mower batteries from the sealed lead acid batteries that the mower shipped with to much more reliable 48v LiFePO batteries, which the…
This is a simple adapter for M42x0.75 (T2 mount) to M48x0.75. This adapter is very robust and securely mounts my Fujifilm X-E4 to my Askar FMA180 Pro. With an inner diameter of 35 mm, it should also be compatible with a full-frame sensor.…
I am waiting for you to supply the mirrors and prism for testing. 3D Rotating Fixture to View Objects from Various Angles for Industrial Inspection System with Barlow Lens M48 Interface Additional accessories: 4 pcs. M2 x 8mm screws.…
Please check the original model for all information. This model is essentially the same. The only physical difference is that I used these 48x0.75 extension tubes instead of the 42x0.75 extension tubes. The only difference in practice is…
This is a modification of dave's excellent DIY collimator but designed with a M48 thread. I used CNC Kitchen M2.5mm Brass Inserts (https://cnckitchen.store/products/gewindeeinsatz-threaded-insert-m2-5-standard-100-stk-pcs) There is now a…
This is a Model of the M48A2 Räumpanzer. I found the Model on thinkercad
When replacing my Celestron OAG with the PlayerOne OAG i lost the possibility to rotate the field of view. So I designed first a version for CNC production, but as this is expensive and I was curious if it can be made in a printable…
Náhradná matica na nadržku pre výrobník hmly alebo hazer
Gazelle Berini m48 front fork spring bolt Check also my other designs: https://www.printables.com/social/201278-hans/models
Gegenlichtblende / Sonnenblende / Störlichtblende / Streulichtblende für das 8,5cm f2 Nikkor für die Nikon Meßsucherkamera. Gewinde M48 x 0,5 Kann aufrecht stehend mit der großen Öffnung nach unten ohne Unterstützung gedruckt werden. Für…
Three pieces are printed in TPU and one piece (adapter connection on the telescope side) is printed in PLA as it is being clamped in place. Category: Other
Basic holder for Green USB-C to a 7-port USB A 3.0 hub, model no. CM481 Will keep it from moving around. Specifically made it for size #8, 3/4" screws, but any small screws will work. Files included are the complete pair and each ends…
I have lost my M48 ring stopper, so I have made a new one You wil find 5 version, with some different tolerance from diameter 48 mm to 48.4 mm You should print it in 0.08mm. New Version : You will find all file for youy CNC provider
When converting a Ryobi RM480e electric riding lawn mower from lead acid to lithium, it's important that the new battery pack be securely mounted. ( UPDATE : I'm told these brackets will fit only the 75 AHr model [ RM480e ], not the 100…
When converting a Ryobi RM480e/RM480ex riding lawnmower to lithium batteries, a replacement battery gauge is needed for accurate charge information. The TR16 (w/ a 100A shunt/sensor) is a good choice, but it needs a slightly larger…
Deux bagues M42M vers M42M et M42F vers M48M réalisées à partir du fichier opensad threads.scad de Dan Kirshner. Les fichiers sources sont disponibles ici : https://github.com/MHilairet/Astronomie/tree/main/Modeles_3D
Nut for the air filter housing on a Cub Cadet Tank M48 Zero Turn Mower. Printed in PETG with raft & supports.
Includes slot for (un)tightening with coin, screwdriver, tweezer handle, etc. Also serves as hidden container. Title Major Dia. Minor Dia. Pitch Depth Magnet Product Barcode M48-4x13 48mm 44mm 4mm 13.72mm 8x3mm かんずり(Kanzuri) 大 ７０ｇ…
This is a M48 adapter to mount a planetary camera to a telescope via a M48 thread. The planetary camera is screwed onto the adapter. A 1,25" filter can be mounted at the front of the adapter. Please be careful if there is glass close to…
Part of a bigger heating structure (flow-through). Missed a 3D from the manufacturer, so I made it myself.
I am waiting for you to supply the mirrors and prism for testing. 3D Rotating Fixture to View Objects from Various Angles for Industrial Inspection System with Barlow Lens M48 Interface Additional accessories: 4 pcs. M2 x 8mm screws.…
This is designed for the monitor that comes with the DC House lithium battery. It replaces the original monitor and reuses the existing hole. Power is supplied via the USB port. To mount the panel frame, you’ll need four M2x8mm pan head…
M48x0.75 dual-sided threaded dust cap, with both male and female side, for astronomy. These threaded dust caps are useful for astronomy cameras, telescopes and adapters. This thread size is often called "Wide T-thread" or "Wide…
