Counting matching models…
My hinge broke so I modeled this as a fix. I printed it with PLA since that's all I have, and it's been two weeks so far and it's holding strong. I printed it vertically, the same way the 3D model is oriented. Supports are required, so…
Replacement hinge for the audiotechnica m50x. This part has been modeled for the left side, just mirror the part to have the right side. To replace this part follow this guide from step 5 to step 13 while skipping step 10, and just…
Made this because the glue kept wearing out. I printed it with columns. To attach, put the clasp that came with the ModMic into the circular indent and snap the whole thing onto the headphones. Like this:
I just wanted to make my M30x immortal so yeah I tried printing this out of a bunch of different filaments but I found that PETG is the best material for it. So far I tried random PLA+s, ABS+s and PETGs Most PLA+ lasts around a month,…
This is my simple solution to making my ZMF ATH-M50xBT2 earpads fit nicely. I bought ZMF's earpads for my headphones and they feel amazing. However, they are very loose and would constantly fall of if not handled gently. These holders fit…
A fully printed headphone holder that will fit desks up to 2.25" thick. No hardware required. Was designed around the Audio Technica ATH-M50x headphones, so any pair with a wider headband probably will not work very well.
M50x1.5 threaded blind stuffing to close unused M50-openings. Unused PG42-openings in housings are also possible to close with this blind-stuffing set. [1] Thread type: Metric tread [2] Diameters for suitable openings: Diameters for…
A spacer that goes inside the earcups/pads of ATX-M50x headphones. With the some pads, ears touch the inside of the ear cup, this lifts the pad away from the body/driver of the headphones and gives some space, making them more…
Hinge fix for Audio Technica ATH-M50X headphones I recommend rotating 33° on X and Y axis, and sinking the model little bit for better adhesion Depending on tolerances of your printer, set the scale to 108% on X axis and 104% on Z axis…
My hinge broke so I modeled this as a fix. I printed it with PLA since that's all I have, and it's been two weeks so far and it's holding strong. I printed it vertically, the same way the 3D model is oriented. Supports are required, so…
Inspired by this design , this is my take on adding a mic to the Audio Technica ATH-M50x. The boom is made out of 2.5 mm² cable which is stiff enough to hold position but easy to reposition. Two 10×2 mm magnets covered in black electrical…
Audio-Technica ATH-M50x - Repair & Preventative Reinforcement Clip (No Glue - Snap Fit) Project Description Has the curved yoke of your beloved Audio-Technica ATH-M50x broken, or do you want to make sure it never does? A quick internet…
Desk mounted stand for AT M50X but will probably fit other models as well. I made it for my desk which is 38mm thick but if your desk is thinner you can use the bolt to secure it to your desk. I printed the actual mount face down with…
An 8 mm thick M50x2 nut for locking the drain of your bathtub in place. I visited several stores asking for a replacement part but they said I had to buy a complete drain set. And I wasn't going to do that. And now you don't either. 0.2mm…
One of the best headphones you can buy for under £200 is the Japanese-designed audio-technica M50x's. They are meant for studio sound monitoring and have a flat response to provide true to life sound. However they don't have a built in…
The shirt clip on the in-line remote for my aftermarket ATH-M50x boom microphone broke, so I modeled this replacement in FreeCAD. Mine was bought many years ago and branded “Neomusicia”, but the design looks identical to the one in the…
Small fix preventing ATH-M50X from overextending when small nob is broken normally preventing this. This should be printed in the direction the STLs have to not need support. There is no tolerance between parts to ensure they hold…
Earcups are too close for my ears, and it gets painful to listen for a long time, so I made a solution for us to use. The design is symmetric for both earcups. Took me 3 tries to find out the best way to print this, 2nd picture shows the…
Minimalistic replacement for the tiny piece of plastic that holds each earcup of Audio Technica ATH-M50X headphones in place. Note: it's more rigid than the original solution, so headphones are not going to fold as nicely anymore. What…
English: osVac adapter for the Blastgate ( https://www.thingiverse.com/thing:4790129 ) or other Blastgates with a M50x2 thread. Actually, the heel, for which the support is also needed, should seal. If not, simply Teflon tape ca.10 times…
