68 models
This is my Tokarev TT-33 model. It is a solid (no moving parts) 1:1 scale model. You can of course scale it to whatever size you like in your slicer. I made my example at 1:3 scale on my resin printer. You could scale it down for GI Joe…
Aliens APC, connecting pieces of filament, pins and gluing, m3x8 and m3x10 screws needed viz galeri fotos APC wheels rotate and turn in sync, rotating and sliding cannon, rotating front cannon, sliding side doors, interior from side door…
Dual Intake This was a project that took over 1 year to complete. I want to recognize Austin Chandler for helping with the R&D as well as Isaac Fischer at Fischer Motor Works for providing advice and filters when I was selling these in…
;tldr - Quick Start: Select the model (! Use Prusa Slicer 2.6.0 or newer ! ) - “Direct Drive” for the MK4 or “Bowden” for the Mini+., Additionally, you can select a layer height to test. Simply load the file in Prusa Slicer and slice the…
This stand for a Logitech Ergo M575 trackball mouse will give the mouse an angle of 30 degrees relieving strain on the users arm for a comfortable experience.
Shure sm57/58 Microphone Desk Clamp Stand + Headphone holder. Don't forget to print the screw that is a separate file.
A 45° wedge stand to hold the Logitech M570 trackball mouse. Held in place via ball and battery holes. Place to store battery cover. Find ergonomics better than flat and takes up less space. Print instructions Wedge print is hard plastic.…
A replacement battery cover for a Logitech Ergo M575 trackball.
Ergonomic base for the Logitech m575 trackball; differently from other similar models, this does hook to the bluetooth usb dongle slot and the thumb-ball hole, allowing for a far cleaner look!
This clamp is perfect for combining shure sm57 and other small diaphragm condenser mics and having them aligned. It is useful for hihats snares guitar amps recordings and much more!!!
A stand to make the Logitech M575 angled at 30 degrees for ergonomics. This will lock tightly to the bottom of the mouse
Tried to refine things a little bit and implement suggestions I saw in comments. I recommend printing in thin layers, I did 0.12mm. The tongue for the dongle holder needs supports (see picture). Fitment for the dongle is perfect on my…
I've added fastening for a shure sm57 (and similars) to the original model.
This is a simple adapter to give your Shure SM57 (or one of its clones) a right-angle bend. It's great for miking snares, where the hi-hat normally gets in the way, and might be useful for miking amps and the like, depending on your mic…
This is a button/switch in the general shape of a Claymore mine detonator. It uses a guitar pedal stomp switch for a satisfying click. I put a 3.5mm connector on it so it can be used with devices like the Xbox Adaptive Controller or HID…
This is a low profile bracket/baffle for a Broadcom BCM5719-4P - 4 x 1GbE PCIe NIC (for example the BCM95719A1904G) to be used in a Lenovo ThinkCentre M920q tiny PC. Remove the card's original bracket and use a small-head screw from the…
20 deg stand for a M70 Logitech trackball
Two styles here: Tilt with forward angle (normal desk use) Tilt up with lower anchor to hold in place (for my poor basement ergo setup) I like to keep two variations on desk and swap every few days to avoid repetitive injury, I think that…
you have to print it upside down, since the base is the top. i print in tpu with 2 perimeters, 10% infill no supports
I wanted to copy the Royer R121 and SM57 combo mic holder, but with the bigger body Sterling ST170. The opening for the ribbon mic is 32-35mm ish. I printed it in PETG at about 20% infill so it'd flex a bit. To attach it to a mic stand, I…
I lost the battery cover to my mouse and the battery tends to fall out without the cover in place. I found a printable replacement cover but it didn't quite sit flush with the mouse and so I created a remix in FreeCAD. I also created a…
Latest version of my Logitech M575 trackball 45 degree angled base. The primary change was to increase the diameter of the anti-rotation pins to increase their robustness. The angle of rotation on the 45 degree plane was also increased…
I have included the inventor file that I used to make this with so feel free to change the angle to your hearts content. Update: Printed and checked the fit, still a little tight, just needed to debur a little on the square locking…
A 45° wedge stand to hold the Logitech M575 trackball mouse. Held in place via ball and battery holes. Place to store battery cover. Find ergonomics better than flat and takes up less space. Print instructions Wedge print is hard plastic.…
Single version of this intake https://www.printables.com/model/1208365-2009-2013-bmw-x5-dual-air-intake-for-diesel-m57-t
The same as Ebachalo's but as one piece vs two. Original: https://www.printables.com/model/52753-logitech-m570-trackball-wedge-stand-45deg Print settings: Prusa Slicer, Supports: auto gen supports, overhang 45, style organic, top contact…
This are files to make the M10 wire connector to fit the "M57 firing device." The connectors inside are made from a female spade connector cut in half. Solder wires to the tail of the split connector, and insert. Holes might need…
Simple tent mount for Logitech M575 trackball. Pictures show a 10deg tilt. There are models for 10, 15, 20, 30, and 45 degree tilts.
Logitech M575 trackball mouse tenting wedge remix with 12deg left to right and 5deg front to back tilt.
This specific VTech baby monitor is one of my favorites due to it supported both direct wireless as well as Wi-Fi connectivity between the cameras and the parent unit (with app viewing via Wi-Fi), but I found the parent unit to be very…
There are two models of mouse holder. Holder - This fits the mouse only. Holder with Pusher Hole - this fits the mouse as well as a trackball pusher. The other file is the trackball pusher, used to easily remove the trackball to clean the…
Arachne generator 3 walls
Swirl flaps removal plugs for BMW M57 diesel engine, 22mm. You'll need 6 of these + orings. Make sure to use high temperature resistant material like Nylon. Original orings should work fine, I used a bit bigger ones though. Designed with…
This is a battery cover for the Logitech M575 trackball mouse. I couldn't get warranty support for the lost cover, so I made a 3D model of it. If you have lost your battery cover as well, this should help. Print Settings Printer Brand:…
Simple tool to make it easier to remove the trackball for cleaning. Sized for the Logitech Ergo M575.
You have two options. The first is to print the frame and use your own thin foam between the rings. The second way is to print the rack and apply a pop filter from another microphone. Pop filter to Shure SM57 You need to print: 1x…
Changelog: 2026-06-08 updated to v0.2. adjusted depression for battery door. Accidentally had m6x16 in BOM which should be m6x20mm. I added a m6x16 version for m575. 2026-06-08 added beta logitech m575 mount based on…
Here you can get a holder for the Logitech M570 Trackball mouse. See the drawing for dimensions.
This model needs to be printed in a flexible filament. The model shown in this post is printed in TPU with a Shore Hardness of 95A. It should also be printed with 100% infill. The mount can support the weight of a Shure SM57/8 when…
While the pouch that comes with the Shure SM57 is more than enough to protect it (and much more importantly, anything it comes in contact with), the official A2WS windscreen/pop filter isn't nearly as robust. This case snaps on to protect…
A simple tool to allow cleaning inside a BMW M57 fuel injector pocket with your shop vac. Fits 1.25in standard vacuum hose. At the correct scale this print should be 254mm tall, double check before printing. I made this for use on my…
Print with text up. use supports on build plate only.
A tray that holds 4 Shure SM57 microphones so that they take up minimal space in the case drawer without flying around. It features a space for 19mm spike tape for labeling as well as slots to easily grab the mics.
I needed to make some brackets for mounting a Nissan Leaf EM57 motor in an ev conversion project. These designs were done in Freecad and iterated to make a perfect fit. You will need 3 of the back spacers for the rear plate. Can be used…
Mount for Logitech M575 trackball. After printing just add a 1/4-20 nut.
changed the angle of the model by a few degrees to let the base be printed flat
Insert for SM57 based on gridfinity
This remix is to extend the centre pillar to push the trackball a little bit further.
Remixed MKronenburg 's angled stand for the Logitech Ergo M575S, adding recessed pockets to the bottom for SJ5302 anti-slip rubber bumpons. It kept slipping under use, so even a few of these small bumpons solves it. The original design…
These are feet I designed for my Sliger SM570 which allows me to use 120mmx25mm case fans under the case. They allow the use of the stock hardware; stock lock ring nut can be removed from rubber feet easily. You can see from the photos…
The Linkup PCIE 5.0 riser cable is not compatible with the original bracket that comes with the Sliger SM580/SM570. The mounting holes do not line up. I decided to design my own bracket that will fit the Linkup riser cable. The holes to…
This rear chassis plate for Kyosho Dirt Master normally only comes on the UM574 Gear Box Set parts tree (upper right of picture): All the critical features are there in my model, so that it fits and functions like the original part. It…
Works on Shure SM57 or the Pyle alternative. uses a M5 Screw to hold a pop filter
I was printing and assembling BoByS' excellent "Simple Microphone Pop-Filter" but was lacking a way to clamp it onto my SM57 microphone. So I came up with a simple yet effective clamp that joins the two together. It's a fast and easy…
Designed to fit the classic Shure aesthetic (reminiscent of the SM57), with technology inspired by the Neumann KMS 105 2-stage mesh pop filtering, making it even more effective at eliminating plosives without rolling off high frequencies…
If you print this before you separate the motor and gear reduction box you can sleeve the greasy input shaft to preclude having to regrease it with moly type grease. Keeps dirt and moisture off of the shaft. Located securely on the o-ring…
Logitech M570 trackball replacement rubber feet. I'm loosing these sometimes. Printed from Fiberflex 30D, 0.15 mm layer height. Installed using thin double sided tape.
Here are a few adapters I made a while back to adapt Agfa Staeble made Repro lenses to M57 mount on the Bronica S2/S2A. These lenses comes under a few brands such as Ultragons, Repromaster, Intergon etc. From what I understand they are…
A protective shell for an A2WS windscreen on a Shure SM57 microphone (just like the US president has used since 1965!). It prevents the windscreen from being crushed and deformed in storage or transport. The groove in the handle part is…
Printed face down. No supports needed.
This is a spacer that goes in between magnets when replacing old M57 magnets with neodymium magnets. Two are required.…
I am planning to swap a Nissan Leaf AZE0 drive unit into a classic car sometime in the future, but it will be stored in a shed until that happens. The gearbox caps might fit all 2011-2025 AZE0/ZE1 Nissan Leafs, but the inverter terminal…
The Linkup PCIE 5.0 riser cable is not compatible with the original bracket that comes with the Sliger SM580/SM570. The mounting holes do not line up. I decided to design my own bracket that will fit the Linkup riser cable. The holes to…
Printed face down. No supports needed.
This is the SM57 body Original war broken, so i decided to measure and print Printing Material: PETG or ABS (recommendation); PLA (alternative) Layer Height: 0,16mm (recommendation) Orientation: On the Bottom Support: Base only Infill:…
Non stackable holder for 1 SM57 without a windscreen. I tried making it stackable but wall strength was an issue for the environment it would be deployed in. Feel free to remix and try to fix this issue!
Super simple print. Fits snug around orange silicone weather seal and sits against aluminum housing.
