212 models
The Legend of Zelda: Majora's Mask The widest section of the inner dimensions of the hollowed out side of the mask is slightly larger than the average mans face. If you have a large head you may need to enlarge it which would require you…
Print approx. €15.36–€18.77 excl. taxPreliminary estimate for one variant
Update June 18 2023: I moved the lanyard lugs to the sides, which should make the bird call dangle better when worn as a necklace. This is a set of whistles tuned to the first five notes of a G or F Major scale. It is designed for use as…
Print approx. €5.52–€6.75 excl. taxPreliminary estimate for one variant
This beauty is a bit tricky to print. I've included a prusa .3mf that should have slicer settings. The multi-color is done with filament changes. PETG and PLA both worked well, just ensure your bed is clean and sticky, and your stringing…
Print approx. €2.29–€2.79 excl. taxPreliminary estimate for PETGSource material: PET
Created to replace the endcap for a metal oval tube with a 2mm thickness, a major outer diameter of 80mm, and a minor outer diameter of 40mm. I ended up having to scale my print to 101% to get an acceptable fit. My 100% model would slide…
Print approx. €1.06–€1.29 excl. taxPreliminary estimate for one variant
Drinks coaster with Zelda Majora's Mask Moon design. Print at 0.3mm layer heights. Gcode is for 0.6mm nozzle.
Print approx. €0.89–€1.09 excl. taxPreliminary estimate for one variant
A little latch to close your marshall major properly when folded. (make it compact)
Print approx. €0.17–€0.20 excl. taxPreliminary estimate for PETGSource material: PET
A while back we bought a soundbar, specifically this soundbar for the bedroom because even a cheap, lower quality soundbar is better than what comes baked into the TV. You can get these on Amazon for like 40 bucks or something. Anywho,…
Print approx. €2.45–€2.99 excl. taxPreliminary estimate for PETGSource material: PET
My ear cushion from my Marshall Major III was very used. So I make an adapter for use a ear cushion from a Marshall Monitor II that I had. It's printed with my prusa MK3S+ in 0.2 mm and with organics supports everywhere. I have recycled…
Print approx. €1.64–€2.00 excl. taxPreliminary estimate for one variant
https://www.facebook.com/solarastronomy.sk/posts/pfbid02UChmo7Kn5aebKzN6yFr7Lqps8LwheNVhBdjHqouLqvWqM8ifqkxXx6Pce5QfcoeZl
Print approx. €0.61–€0.75 excl. taxPreliminary estimate for PETGSource material: PET
Majoras Mask HD from The Legend of Zelda printed in different parts
This is a multicolour remix of the Majora's Mask model by WeeMadSausage on Thingiverse. We've also made a wall-mount that holds the mask up through the eyeholes. For the full colour version, you will need a printer that can print a…
This model gets a few downloads, I would love to see your end product, please post it as a make, it may motivate me to make upgrades or mods. Thanks! Overview The idea behind this case is to be simple to print in terms of setup, required…
I made a copy of one of my plastic pipe instruments to try the result, it works quite well so I share the result with you! I made a video about this project : The first version is a fully 3d printed 3 parts flute, you have to glue the…
2 Versions included- One has a hole in the bottom to allow for tree supports on build plate only. Scale to any size. Max Mini Size shown above. Normal size below: Powered by Image-to-3D from MakerWorld…
There is a version without embedded magnet spots and one with. (!) If you want to embed magnets, make sure you look up how to add a pause during the slicing process. This varies by slicer. (!) The current design is for cylindrical…
Added a cutout to the mask so the master sword (or other item) can be inserted. I tweaked this to function as a hair pin Category: Fashion
This is a Snapmaker U1 profile for a remix of Majora’s Mask, designed specifically for 4 color toolchanger printers like the Snapmaker U1. The original remix placed multiple models on the same plates, which resulted in excessive filament…
Important Update Note: I made this model early on with very little experience. Two people have now reported having issues with this model, and it's very possible that this model has problems. I don’t want you to waste your filament……
First I have to give credit to Synthetic Electron 3D for the original concept and design. He really did most of the work! This mod re-uses the stock 'auxiliary' cooling fan, blowing through the flat horizontal blower in the rear of the…
Resolution: 0.2 Infill: 10% Cubic Filament brand: Sunlu Filament color: Burly Wood Filament material: PLA+ Printed with tree supports everywhere and after printing the left hand side I used support blockers to reduce the number of trees!…
Ever since I got my Snapmaker U1 delivered, I have wanted to print the four-colour Majora's Mask model. However, I wasn't quite happy with the painting or the high wall thickness (a remnant of the model being intended as a keychain). One…
Major League Baseball / MLB logo in 3D. 5mm high.
A helmet that was never included in the Tommy Trojan/Drum Major Lego kit. You'll also wanna print a sword, cuz it didn't have one of those included either! https://www.printables.com/model/248800-tommy-trojan-lego-sword Two files: 1.)…
Skull Kid wearing the Majora's mask, or vice versa depending on your perspective. This mini is approximately 38mm scale.
High poly model of Skull Kid from The Legend of Zelda: Majora’s Mask. Needs supports. If you like this, give it a like and follow me, because I make Zelda models all the time.
Inner and outer knobs for TC Electronic G-Major 1 and Triple-C devices. Possibly to fit other devices from TC. Inner knob has clearance versions. Every 3D printer has different possibility about precision, so I created clearance files…
This is my attempt at Majora's mask from The Legend of Zelda: Majora's Mask game. You'll need to mirror all 5 of the spikes, they go 1-5 from bottom to top. To get a wood grain texture use a rotary tool to gouge out small lines or use a…
I was able to remix this version for compatibility with the INDX 8 tool variant and it is already painted! For those that are curious, this was PLA. These are the colors that I used (links are not affiliates in any way): Polymaker Pro…
PPE Majora's mask based of the Legend of Zelda Majora's Mask. Half face / mempo style mask
My entry into Major Hardware's Fan Show Down S5. I’ve redesigned basically everything except the “base-plate”. I thought it’d be fun to make a new version for MH's new testing rig. This version is using a NASA inspired Low Speed…
I created (2) different types of the Sergeant Major rank in order to choose from a plain and flat star to a 3D version star at the center. When printing the 3D star, labelled "SgtMaj V2", the below perimeters worked best for me on all of…
I'm not into it, but I was seeking it for Christmas gifting for a loved one who is into it. Here on Printables, ReProps's model (which this remix seeks to improve upon) was the only one I could find for "Majora's Mask from Legend of…
Hier gibt es eine ausführliche Beschreibung: https://druckwasdaszeughaelt.de/atomic-heart/#agent-p3 https://ko-fi.com/dwdzhde Der Major aus dem Spiel Atomic Heart. Skaliert auf TableTop-Standard 32mm. 3D-Druckeinstellungen Resindrucker:…
Made a nozzle cap for a 16.9 oz Aquafina water bottle. The cap adheres to the PCF-26P thread standard (can be found here: https://www.bevtech.org/assets/Threadspecs/2072575\_tmp.pdf ). Prints well, as the bottom part of the threads…
Majoras Moon. You can support me on https://www.patreon.com/Schlossbauer if you like my work. Category: Toys & Games
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
I have downloaded and printed all other versions of these parts on tningiverse but they all suck and don't fit. If you need to modify a part to suit your needs, you can download the .step Print Settings Printer Brand: Creality Printer:…
It has a problem that i do not know how tos solve, it is kind of empty by the inside, but I hope is useful and u like it
As i needed a new throttle quadrant i took this brilliant design and scaled it down to 87% as i needed it a little smaller. Additionally i changed the design a little according to following of my rules: - Simplification - Print more and…
Máscara Keaton de la saga de The Legend Of Zelda, concretamente de Majora's Mask y Ocarina Of Time. Pronto habrá más modelos de máscaras de este juego y mi idea es hacer todas las máscaras de la saga completa. Hago encargos…
Should be fairly easy to print, highly recommend supports for all pieces.
This is a remix of 3DPrintDogs' Multicolour Majora's Mask. Their version was set to use the Bambu X1 Carbon printer, and if you tried to change it to the P1S printer, it would lose all the coloring. The models themselves and the coloring…
Description Maximize your footprint and clean up your setup with this top-mount bracket for the Creality K2 SE + CFS system . This bracket lets your CFS sit securely on top of the printer , freeing up valuable bench space while keeping…
Kenwood Major tool hanger for mounting under table/shelf or on wall. Great way to store your Kenwood Major tools nearby if you use your kitchen machine regularly 3 mm hole for mounting. Printed in PETG with 30% Infill and 4 walls and…
Simple slice and Print. Support needed. Use Tree support. For me the conter part and screws are not needed because it holds already with the press fit.
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Make your brutal grinder, the ominous Mazzer Major, single-dose! With this replacement, the beast becomes relevant again in the world of the third-wave coffee. And you can enjoy the pleasure and speed of those 83 mm burrs in top-notch…
The kiddo wanted a Majoras Mask necklace, so I added a loop for the pendant, and I smoothed the spikes so they wouldn't be as pokey Post-Printing Category: Accessories
CSGO Major trophy BLAST Paris 2023 I downloaded this model from Sketchfab and converted it into a STL file. It has to be printed with support, and carefully be removed right at after printing. Then it is easyer. I printed this in gold and…
Marshall Major III headphone side wire mounting. They are still working as they should today. I printed in normal PLA wi
My entry into Major Hardware's Fan Show Down S4 EP11
This is a Drum Major Mace for a marching band, there are STL files for both top and bottom of the mace This is an economical Drum Mace printable for under $5. You need a 3/4 in PVC pipe, some super glue, and maybe 15ft of para-cord and…
Major Payne - 1995 3D printable model.
Band of Brothers - Major Richard Dick Winters - 2001
Knobs for TC Electronic G-Major 1. Original size.
Easily printable insert for coffee grinder Mazzer Major to replace the original hopper. Make you single dosing procedure with Mazzer Major flow like a stream. No anti - popcorning cover needed! Integrated bellow, slow feeding of the beans…
M.A.S.H. - Major Frank Burns - 1972-1983
M.A.S.H. - Major Margaret Hot Lips Houlihan - 1972-1983
Garo's mask from Majora's mask 3D obtained from files extracted by https://www.models-resource.com/3ds/thelegendofzeldamajorasmask3d/model/12408/ I only cut out the mask from the model and made it wearable. The scaling is just enough to…
Small Key from both The Legend of Zelda: Ocarina of Time and Majora's Mask. I couldn't find an STL of the key from these games, so I designed one in Fusion 360. I included the key by itself, and both a small earring sized loop and a…
just a boss key
Ready to print file for p1p with AMS in theme of Major Vonreg's Tie interceptor. Plenty of settings to be improved upon, just a quick paint and scale up in Bambu I thought would look cool. It did in my opinion so I thought I would share.…
Replacement bracket thingo for Marshall Major IV headphones. It does away with their fragile clip system and just relies on a friction fit, works well. Category: Replacement Parts
M.A.S.H. - Major Charles Emerson Winchester III - 1972-1983
Star Trek Deep Space Nine - Major Kira Nerys - 1993-1999 - 2 VERSIONS
A little latch to close your marshall major properly when folded. Print Settings Printer Brand: Creality Printer: CR10S PRO Rafts: No Supports: No Resolution: 0.15 Infill: 100 Filament: Polymaker Polyflex PLA Black Notes: . Category: Audio
Wrote converter (https://github.com/raistlinJ/3mf_bambu2prusa) to generate a prusa-friendly 3mf; repainted to 5 colors
Size is 27mm right now, to make it fit your ears just choose whatever mm you need and add 3. EX:I need a 35mm plug, scale plug x and y + 3mm the size you need. Adjust Z to your liking and once X and Y gets scaled too much you will have to…
DONT VASE MODE THESE. They are designed to fit in exact wall width, in and out. This is bellows and a throat guide for Mazzer Major coffee grinders. This will help you achieve zero grind retention. If you have a Mazzer, you know what the…
This is a set of feet to angle the Mazzer major to better use a doserless chute. This may fit the Junior or the super jolly, but I haven't looked at all. This requires some M5x25 bolts and some M5 nuts. You could probably alter the shaft…
All rights go to Nintendo. Sometimes the hair doesn't print… Use supports for the mouth.
A few color adjustments, printed and tested on the Prusa CORE One+ INDX.
might need a frew reprints to make it stick properly i used a 0.25 nozzle
Overview A full set of 22 Tarot Bookmarks featuring all Major Arcana designs, created as Hueforge-style black & white prints. Each bookmark is slim, sturdy, and ideal for books, journals, and gifting. Designed for high detail and clean…
Printed from PLA, 3 perimeters, 20% honeycomb infill, using tree supports.
Does require supports, i print flat down and sand the side that faces the print plate, in theory it could be printed at a tilt and upwards.
A wall holder for my Marshall Major II Headset. Print Settings Printer: Print Rite DiY 3D Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0.2 Infill: 30% Category: Audio
Remix of faceplate for Xol Toolhead (June 2024) with Voron logo
The Mirror Shield from The Legend of Zelda: Majora’s Mask. A project I worked on to separate each color for the model into separate pieces so pieces can be printed out in their own color (no painting / minimal painting required to post…
lithophane Poster Legend of Zelda Majora's Mask N64 Nintendo Voici un lithophane d'un magnifique poster sur le thème de Legend of Zelda Majora's Mask de Nintendo N64. Faites vous plaisir ! This is a lithophane from a beautiful Legend of…
The 14 major clan logos ov VtM V5, in lithography form, created through; https://tool.itslitho.com/CreateModel They're in a weird standing formation, so put them on their backs when printing, probably. They're all 100 mm diameter, so…
Printed on an X1C. A lightbox featuring Majora's Mask from The Legend of Zelda: Majora's Mask! Print facedown on the textured plate. No supports needed. Roughly 9.5in in size. I've printed with 8 colors, but can easily be dropped down to…
Got the model from The Models Resource.
Easy to print, use support and a 0.12 layer hight
Rack Ears for TC Electronic G-Major 1, 2 and Triple-C devices. Possibly to fit other devices from TC with 195mm depth. Print instructions PLA/PETG 0.2mm layer height Infill 40% Look to 3MF file for detailed print settings in PrusaSlicer.
🎖 Major Thorne Vex, Ironfront Commander Medium Humanoid (Human), Lawful Neutral Armor Class 20 (Ballistic Combat Armor) Hit Points 165 (22d8 + 66) Speed 30 ft. STR 18 (+4) DEX 14 (+2) CON 17 (+3) INT 16 (+3) WIS 14 (+2) CHA 12 (+1) Saving…
Two customizable 3D Lissajous figures. Viewed from each side, the major triad model shows the ratios of the notes in a major triad: the root, the major third and the fifth. When played in tune, the frequencies of these notes will be in…
Legend of Zelda Majora's Mask themed coaster. One of my all time favorite games and love the design of Majora's Mask. Printed with a 0.4 nozzle at .20mm, but plan on trying this model with a 0.2 nozzle for finer detail. Coasters are…
this is a duduk in F the fingering is not similar to a traditional duduk i haven't printed it yet but it should work have fun Category: Music
CHANGELOG: 12/14/23 - V2 Updates (Inserts version only): Fixed the issue with the 5mm gap between the middle piece and base piece(s) magnets. My bad. Also remove the chamfer directly beneath the middle piece for a more refined aesthetic.…
Mask has some detail lowest resolution is best. 0.4 nozzle (or smaller) 0.08 line height (or smaller) Print in the orientation of the file. Print with raft for best results.
Inspired by the classic Majora's Mask game, this is a variation of my Nintendo switch pro controller holder! It would look perfect in any gamers room! Please leave any ideas for future versions, and my other ones you can download here!…
3D model of Majorca Island (Spain). You can change filament color based on layer altitude.
A very simple model to print, no supports needed only takes 15min.
This is a remix of the Noctua Airflow Amplifier. A bracket for the base from MajorHardware was added. Link to the model from MajorHardware: https://www.thingiverse.com/thing:4911660
This will be a collection of designs for MajorHardware's Fan Showdown! No1: The "Bat-Fan" Print Settings Printer Brand: Creality Printer: CR-10 Rafts: No Supports: No Category: Engineering
it needs supports to be printed 👍
lithophane artwork Zelda Majora's Mask N64 Voici un lithophane d'un artwork Zelda Majora's Mask N64. Faites vous plaisir ! This is a lithophane from an artwork about Zelda Majora's Mask N64. Enjoy ! Print Settings Printer Brand: Creality…
![XOL Faceplate with Voron Logo (for Major Release [2024-06-19])](https://media.printables.com/media/prints/929727/images/7088049_752f545f-cdfe-4cf7-a462-5042413ddedb_02afe15c-8220-4d5c-9da7-4988b7c2d177/20240701_201239.jpg)
