Counting matching models…
Like many people, I really dislike the Thermarest pump sacks. I think they’re a really lazy design from Thermarest and clearly they can do better because every other company has. The two best pump sacks I’e used are the Exped Schnozzel…
Miniatures of all detectives and monsters from the add-ons suppressed memories and recurring nightmares miniatures. Mansions of Madness Second Edition — Recurring Nightmares: 8 detectives: Michael McGlen, Sister Mary, Gloria Goldberg,…
Adapters to replace Mares Genius dive computer strap with bungee cords. Initial design using nylon block and file by fellow dive club member Alex P. Print instructions Printed in TPU98. Infill: 40%. Perimeters: 4
This is a custom grip for a Rossi Rio Bravo .22lr lever action rifle. The only extra hardware you need is a shorter bolt that holds the grip to the frame. Just reuse the original washers from the stock furniture. I even included a spot…
In addition to strength (mainly derived from PETG and other solid materials), I would like to highlight the following features: Grooving for arresting. Easy to print. One piece design (unlike others that consist of two pieces requiring…
The pumpbag that comes with the Thermarest sleeping pads are a bit small, and does not serve as a compression bag, so I made an adpater to use the Exped Schnozzle pumpbag. There is a little loop for attaching the adapter to the pumpbag.…
Source: : //www.models-resource.com/pc_computer/littlenightmares/
The tiny pump comes with a rubber adapter that keeps falling of the adapter coming out of the pump. I made an adapter to interface between the Flextail tiny pump 2x and a Thermarest valve.
Palmar cutlery clamp for use at home or in a care environment, where they give independence to people with limited mobility. Pinzas palmares para personas con movilidad reducida que favorecen el agarre a personas con problemas de presión…
This is a key to open the battery compartment of a Mares Icon HD scuba diving computer. If you need to replace the Li-Po battery of your Mares Icon HD, this tool will help you to open the battery compartment screw without scratching it.…
Print Settings Printer Brand: Creality Printer: Ender-3 v2 Rafts: No Supports: Yes Resolution: 0.2 Infill: 100 Filament: 3Deksperten PLA Black Notes: I used tree support to make the internal supports easier to remove. Post-Printing…
Purge Cover needs to printed in a flexible filament (TPU or TPE) and works best with the original retaining ring from the regulator. If the original retaining ring is toast, there are 3 versions of the retaining ring (they should be…
This is a tool to assist in the removal and tightening of the battery cap on the Mares Horizon Semi-Closed Rebreather Unit. Recommend printing the the twist portion facing the bed so you don't have to fill the cup portion with support…
This is a 3D printed figure of “Alone” from Little Nightmares III. The model is designed specifically to be printable on FDM printers, so you can easily print it even if you don’t have access to a resin printer. All parts are optimized…
This is a replacement for the plastic cap that protects the Mares MR12 Scuba Regulator 1st Stage. Mine broke due to age and I didn't want to leave it exposed. I printed it first in PLA, but hope to print it soon in something with a…
Source: https://www.models-resource.com/pc_computer/littlenightmaresii/model/46387/
Description If you have scuba diving fins like the Mares Avanti , you probably got some some parts to keep the shape of the rails… and likely lost some of them :) This is what happened to me so I made a model to create replacements. I…
TPU Adapter for Flextail Pump to Thermarest Neoair Xlite valve
Adapter a to make a stuff sack into a pump sack for a Thermarest sleeping mat with wing lock valve. Printed in TPU. The simple version cut a hole in the bag and glue the rim to the inside of the bag. Stitch Version To assemble cut a hole…
Side Rail Clip for Mares Razor carbon Apnoe fins.
Modified Grill with Brand LOGO
Enter the dark world of Halloween Nightmares ♟🎃 A unique 3D printable chess set inspired by haunted nights, undead warriors and eerie fantasy. King height 11.5 cm. STL and 3MF files included. Explore my website with 80+ unique 3D chess…
This is a adapter to inflate a BigAgnes/Thermarest (WingLock) sleeping pad with a Alpacka Raft Pumpsack. Less than two full pumps are needed to inflate a 25x72 BigAgnes Rapide SL for reference. Material: TPU Infill: 100% Scale: 100,6% on…
Protector for the "Mares Active Heat" heat west battery pack 602A. Prevents from accidentally pushing the button during the dive. Print with flexible Material! I used for mine PLA Soft. Print instructions Category: Sport & Outdoors…
Official logo to SVG to STL to door decoration. The diameter is 35mm. If you have like me a cover print everything a bit thinner. I chose to ignore that 3mm is too high. But you can still look through the hole, so I don't care that much.…
Enter the dark world of Halloween Nightmares Chess Set 1 , where mysterious reapers and undead warriors bring a terrifying gothic atmosphere to the chessboard. The set features a hooded skeletal Bishop with a mystical staff and an undead…
v2: Uploaded adjusted v2 version of pull dump. Increases the bulb head size to help from breaking apart. Also increases the area where the knot enters into the bulb making it easier to connect to. Printed with 25% infill to help strength.…
Halloween Nightmares Chess Set 🎃♟ — a dark and atmospheric fantasy chess piece inspired by the mysterious spirit of Halloween. This detailed Queen features a wicked witch, a magical staff, a sinister pumpkin-themed design, and an elegant…
Print in TPU for best results as needs some flex to fit into the inflation bag valve. Once connected to the Thermarest inflation bag you'll be able to connect it to a Flextail Zero mattress for inflation. The thermarest bag is probably a…
Without this part the strap can easily get loose while diving/snorkeling. I printed it in PETG. It was designed specifically for a “Mares” brand mask. But it may fit on other brands as well. The smaller of the two gaps is for the outside…
This is a remix of this design , which fits on an earlier version of the Mares fin strap. From the look of it Mares tried to fix the issue of the fin strap coming off in a second generation of the fin strap. They mostly got there, my…
The head of the Mares EOS 32LRZ tends to get scratched and dented when in use, particularly on wreck dives, this fits over the end so that to protect it. I made from PETG with default settings but any material would do, a flex material…
Back is done in PLA, front is done in TPU Category: Sport & Outdoors
Alone Little Nightmares III figurine in 3d print format, a video game character figurine on its own display base for collection and display. This collectible is ideal for shelf or desk dioramas, gaming fans, and gift-giving to fellow…
Adapter for inflating Sleeping pad with PARKSIDE air pump, I use PCTG and 0,25 nozzle
This is an ultralight 2 gram replacement for the 7 gram adapter that comes with the Aerogogo Giga Pump Air. I recommend printing in 95A TPU. If you like this model and would like to give back, please consider buying me a coffee .
This is an ultralight 3 gram replacement for the 9.5 gram F1 adapter that comes with the Flextail Zero pump. I recommend printing in 95A TPU. If you like this model and would like to give back, please consider buying me a coffee .
I remixed two together so this will work for other pads
Two adapters to quickly inflate or deflate your Monoking 3D or other DualLock valve mattress. With these adapters and an Etenwolf Air 3 I'm able to inflate/deflate the mattress in about a minute! You'll need to print these adapters in TPU…
This is a replacement cover for a MY17 FOCUS Mares CX bike.
I wanted to keep using my SeaToSummit Jetstream pump (and storage) bag with my new Thermarest Neoair Xlite. This seems to do the trick. A friend printed it for me, so I can't offer any tips there. It's a snug fit on the Winglock due to…
I really loved the presence tokens by BlueChromis , but after working on another project and seeing two color prints, I thought that two color tokens would look nice. This is a trace of the fear icon for a 2 color presence token for the…
Català: Model 3D de la comarca del MARESME, realitzat a partir de dades topogràfiques oficials de l’Institut Cartogràfic i Geològic de Catalunya (ICGC). Mitjançant el programari QGIS i el complement DEMto3D, s’ha generat un arxiu STL que…
Adapter for inflating Sleeping pad with PARKSIDE air pump, I use PCTG and 0,25 nozzle
I wanted to keep using my SeaToSummit Jetstream pump (and storage) bag with my new Thermarest Neoair Xlite. This seems to do the trick. A friend printed it for me, so I can't offer any tips there. It's a snug fit on the Winglock due to…
I really loved the presence tokens by BlueChromis , but after working on another project and seeing two color prints, I thought that two color tokens would look nice. This is a trace of the fear icon for a 2 color presence token for the…
This is a adapter to inflate a BigAgnes/Thermarest (WingLock) sleeping pad with a Alpacka Raft Pumpsack. Less than two full pumps are needed to inflate a 25x72 BigAgnes Rapide SL for reference. Material: TPU Infill: 100% Scale: 100,6% on…
Reboxing in action – watch it here > https://youtube.com/shorts/OR4EjAsjqak THIS IS THE BEST LOOKING Organizer for Unconscious Mind (including Nightmares expansion) RETAIL ED. board game THAT YOU CAN PRINT! 📢 Stay updated! Follow me on…
