Counting matching models…
Needs a properly tuned printer for the tight clearance. Before printing full submarine printing clearnance test is advised. Print both parts, add bolt to front of submarine, lastly add rubberbands. For best spin, try adding more…
Designed with ACES aircombat in mind this almost 1 m wingspan belly landing warbird is one of the fastest 3dLabPrint design. If you keep the weight down it is also quite friendly to fly as well. 4 channel controls include motor, elevator…
Sunken submarine model for an aquarium. I made it so little fish can get in (around 45-50mm in diameter) and it's a favourite hiding spot them. You need to put a little weight into the submarine so it sinks (a smal rock will do or if you…
Wallart or decoration of the mighty Spitfire. Very simple print, fits diagonally on the build plate of both Prusa and Bambulab printers (both versions are in the files). Can be scaled up (original model is aprox. 1m long and 7mm thick -…
Edit 12/18: I added a split version of the alternate player cards tray to accommodate smaller beds. I included a small connector area for basic stability, as the tray typically stays in the box. Ark Nova has been sitting on my shelf for…
An easy to print and fast to assemble Type7 Sumbarine Kit Card. Print it with a low layer height for better results.
You wanna piece of me boy? :P Use body and arm files for print. If you need full model, use full file. And take a look my other models :P All the 3D models of NemoMK2・Cults (cults3d.com)
An easy to print and easy to assemble Typhoon class supmarine Kit Card. Use it to decorate your room and to express your engineering hobby!
Print your own yellow submarine! For your fish tank or kids… or both :) This is a remix of really great model Print in Place Helicopter from Triple G Workshop using the same print-in-place, support-less and propeller down concept.…
This is a 3d model of the cyclops submarine seen in Subnautica. It was designed to be assembled as a kit, however since I have very limited experience with making printed parts fit, some glue could be required (I used some for several…
I wanted a wrecked submarine for my aquarium with a bit more detail than was available here. So I took the original C3 submarine I-52 from HastuneR, and simplified it a bit, hollowed it out, added holes and all of that for fish to be able…
🇸🇬 Welcome to Singapore! This model was created by Dany Sánchez . Marina Bay Sands is a resort complex fronting Marina Bay in Singapore and a landmark of the city. It opened in 2010. It comprises a hotel, convention center, The Shoppes…
------------------------------------------------------------------------ From Original Description ------------------------------------------------------------------------ This model is RC capable and it is 1 meter long. You can freely…
Aliens APC, connecting pieces of filament, pins and gluing, m3x8 and m3x10 screws needed viz galeri fotos APC wheels rotate and turn in sync, rotating and sliding cannon, rotating front cannon, sliding side doors, interior from side door…
I was feeling a little bored today and suddenly I thought, “Let's make the Titan!”. This is a simplified version ready to print and assembe using a little bit of glue. My condolences to the family and friends of the people involved in…
This insert fits the Ark Nova base game and Marine Worlds expansion. In the pictures we've used alternate money tokens. Update Nov 9 2023: added sleeve_holder_2_v2 as replacement for card_holder_2 if you sleeve your cards. Update Nov 11…
This are just test Gcodes (two) for next info (userguide) please look at : https://3dlabprint.com/shop/supermarine-spitfire-mkix/
Hydroponic Plant Basket for 75G Marineland Aquarium. Fits perfectly in the space between the glass lid and the back glass panel. One section perfectly fits 1x regular, 2x long, and 1x extra long plant basket. The basket reaches the bottom…
I wanted to print the Marines Emblem for my nephew but couldn't find exactly what I was looking for, so I made this. Print Settings Printer: Creality CR-10 Rafts: No Supports: No Resolution: .2 Infill: 100 Notes: If you want to do a 2…
Did a blender cleanup of the below model so an exported STL would work in a slicer. It's a larger model for rescaling or cutting/gluing depending on your preference. Was not able to get SketchUp to export the STL quite right despite…
We all live in a yellow submarine! More files here: https://www.3dfindit.com/cad-bim-library?lang=en_US&path=dape&pk_campaign=PrusaPrinters&pk_kwd=prusaprinters
Model can be printed without supports, and scaled to any designed size. Photos of the model have been scaled. The model in the aquarium has increased Z height The model on build plate was printed at 50% (this was too small for my liking,…
Model of a Los Angeles class fast attack submarine
Changed the parts holding the rubber band so they print in the stronger orientation.
"Enemy Fish in the Water ... Release Countermeasures!" This is recreation of a Novelty Submarine Fishing Lure I came up with about 20 years ago. This is still currently in the testing phase so I'm marking this one as "A work in progress"…
Pirate submarine from the movie Vynález Zkázy by Karel Zeman based on the famous book by Jules Verne. The ship is kit, and fits together without any glue. xxx_-_ponorka_6 is here two as a printed part, but I myself will instead use a…
The original cover has some riser to keep cover of from the display window & buttons. Added those. This one also has Raymarine logo. When printing a single color printer: Slice logo.stl to .gcode Place the body just on the top of logo to…
For all Warhammer 40k players who want to carry around their CSM Combat Patrol! This is a small board that holds all 10 Chaos Space Marines, 5 Havocs, the Dark Apostle and Disciples, and Hellbrute. At worst you may have to print it at…
My old boat has a mix of Raymarine ST60 and ST60+ instruments. It's fairly simple to find printable models of the sun cover for the ST60 model, but I haven't found any good ST60+ cover, so I decided to design it. The differences with the…
Description The Collins -class submarines are Australian-built diesel-electric submarines operated by the Royal Australian Navy (RAN). The Collins class takes its name from Australian Vice Admiral John Augustine Collins ; each of the six…
I present to you a free, printable model of French Navy Cruiser Submarine Surcouf from the game Mir Korabli. Model is at 1:625 scale (about 17cm long) and are remodeled from the ground up with the goal of maintaining details while also…
3d printable version of a snap fastener that will also connect to the real world marine snap fasteners. Category: Hobby
Import of the Astute Class Submarine by Hobbyman. https://www.thingiverse.com/thing:4973343 ____________________________________________________________________ The Astute class is the latest class of nuclear-powered fleet submarines…
Original needed supports all over. Cut into 4 individual parts that click together and the big parts can be printed with no support. Tail and tower will need structure. Easy to cut off though. Printing Tip: Print the front and back Hulls…
Realistic replica of iconic submarine, biggest nuclear submarine of cold war - Skipjack class. realistic look - OPTIMIZED FOR 3D PRINTING - length 40cm divided into parts for easy printing on classic size printers stand included Needed: -…
Cool item you can put in a fish tank or any where in your house.
Hi Josh, here is the helmet ; ) Please check the sizing suits your needs and if you do take the project on please post some pics of your progress ; ) Cheers Jace
In English: Model Cyclops from Subnautica. There are three types of models of Cyclops itself. 1. Cyclops_with_cockpit is a Cyclops with the original cockpit. 2. Cyslops_whitout_cocpit is a Cyclops with the cockpit removed for ease of…
A simple remix of a Terran marine with a chamfered base attached to it Category: Models
Beatles Yellow Submarine Bath Toy. Has hole in top and bottom with cavity in center.
An alternative proxy marine design for the community. I wanted to create something a bit more modular, and down the road I'll produce more front armor plates for alternative looks, such as a skull decoration or ammo pouch. Follow for more.
This is my first version of the small submarine HMS Sword from the movie Vynález zkázy (Deadly Invention) by briliant Karel Zeman. This version comes with a stand and has posable flippers. The original attemt was to make it fully…
Say hi to Subby, the cheerful little submarine built for deep-sea fun and desktop charm! With its round shape, chubby fins, and curly periscope, Subby brings bubbly energy wherever it goes. Whether you're into ocean vibes or just love…
Hi Darren, I've sliced it up as best I could to a possible print. Please check that sizing suits your needs also. I'm not even sure you could wear it because the neck seams small and may need to be in seperate pieces to fit on your head.…
Another great Model found over at onekura.com. Cheers Jace
An insert in the same style as my organizer for The Crew: The Quest for Planet Nine . Update 1-12-2023 : New version of submarine. Now prints as one piece, no supports needed! Features include: Holds sleeved or unsleeved cards. Token…
Los Angeles Class US Navy Attack Submarine
Made this coaster for my father who proudly served in the United States Marine Corp. Printed in PLA .4mm nozzle with .1mm layer height Filament swaps at 2.1 mm from Red to Blue 2.4mm from Blue to White 2.7mm from White to Black 3.0mm from…
I uploaded a Typhoon-class submarine on this site almost two years ago, and though the model took me a long time to create, I was not satisfied with it due to its simplicity. However, I now have more 3D modeling experience, and since the…
Rubberband Submarine - separate parts, two part propeller, no tolerance test needed.
An updated version of my earlier Ark Nova insert, now with additional space for the expansion content.
This is a detailed 3D model of a yellow submarine, featuring moveable propellers and a custom stand. Perfect for display or animation projects, it brings a playful and nostalgic design to life.
Hi Wills, here it is : ) Hopefully it is what your after and do check the sizing suits your needs. Windows 10 inbuilt 3D Builder will allow you to select the individual files and seperate further. Let me know if you need any other…
Introducing the "Lines Clamp Cleat" – your rope's new BFF, ready to adapt to any roping adventure. This versatile design can scale like a champ, fitting ropes from burly 5mm mareline to any line you may want this clamp for. No rope feels…
biggest submarine from subnautica
For Christmas my dad asked that I make him things with my 3d printer. He is a former Marine so I thought I would put that insignia on some golf stuff for him. I got this from a 3d file of a ring, sliced it with netfab, cleaned it with…
Magnet of the US Marines Emblem. This model has holes for 6mm x 3mm magnets. Base layer should be Blue. G-CODE has two layer pauses: 3.8mm: add magnets 4.6mm: color change to White
3D Submarine test bench designed for testing and benchmarking 3D printers. It is a small recognizable object that you can download for free, make and share. instagram creator: https://www.instagram.com/_lavidaen3d/ 3D Submarine test bench…
Two models of the iconic Spitfire See my other model of an Avro Lancaster:
Here is a print ready Hammond (Wrecking Ball) from Overwatch, in his Submarine Skin • Tested on a Phrozen 8k mini, using 4k resin print (Image attached for which paints were used to achieve my coloring) • Lots of custom detail added, to…
Made on my ender 3. The wall thickness and infill is critical to make this model (D) float correctly at the water line. I used a 0.4 mm nozzle, 0.2mm layer height, 1.5mm walls, and 15% infill. Tree supports work well. A solid version of…
The source marked this model as adult content.
These are clock-hands inspired by the Rolex Submariner, suitable for my Clock Face Rolex Submariner style . Hour hand: Length: 69mm, designed for a 5mm shaft. Minute hand: Length: 43mm designed for a 3mm shaft . The shaft diameter are (as…
This is a reverse engineered demo for display at Bay Area Maker Faire. It explains the inner workings of a controllable pitch propeller. Ideally the hub should be transparent but I don't have the equipment. All threads are metric: holes…
print whit 2 color change and enable iron on the topmost surpace only pla/petg
The Alicorn from Ace Combat 7, complete with a chess piece stand. This model has 2 variants, with and without the fins extending from the hull. I recommend printing the non-finned version on FDM printers, and the Finned version with SLA.…
lego supermarine spitfire
Very cool Sub with wind up motor and torpedoes ! inspired by the very popular wind-up boat. Adaptation of the wind up boat motor to a submarine , made a balast system for the sub to sink a little ! ( printing in progress I will post more…
This is a design for a metric watertight arcrylic cylinder (90/84 mm) which fits the Cyclops R/C Submarine https://www.thingiverse.com/thing:4560120 by Robert Cook. Modifications Additionaly to the two O-Rings on each cap it is possible…
This is the outer ring for my Clock Face Rolex Submariner style . Assembled with the parts mentioned below and a Quartz Clock Movement Mechanism, you will have a wall-clock inspired by the Rolex Submariner as shown on the cover picture.…
Benchy-submarine. Modelled in Fusion360. Inspired by the original 3D Benchy. There are two versions of this. One with the whole Benchy, one only with the part which is over water. Category: 3D Printing Tests
Title says it all
This is a faithful reproduction of the Yas Marina Circuit. Its dimensions are 20cm long, 10cm tall, 3mm thick and the track width is 5mm, but you can scale up or down any dimension to suit your needs. As it is a simple model, it looks…
This submarine was modeled after an Ohio class sub and named after me! Print with organic supports everywhere. This sub can carry up to 12 Trident II D5 submarine-launched ballistic missiles (unlike the 20 missiles the real models use).…
Haptic model for the visually impaired, based on the book " Kamil – malíř snů " by Markéta Vítková. Read more about the project on PrusaLab's blog .
Mount for Raymarine TackTick Micro Compass
Garden Gnome Marine Bring a little tactical attitude to your garden (or desk) with this battle-ready Garden Gnome Marine 💥 This isn’t your average peaceful mushroom-hugging gnome—this little guy is geared up and ready for action. Few…
Třída Los Angeles je třída amerických rychlých útočných ponorek s jaderným pohonem z doby studené války.
This is a clock face inspired by the Rolex Submariner. Diameter of the face is 160mm. The hole is designed for 8mm shafts. I didn't add the Rolex crone or lettering to not violate copyrights, but with a little research in the WWW and a…
This is a Bimni Boat Top Hinge. I made this because I broke my old one, and they cost about $15 each, so i wanted to print my own. It strong and sturdy, and has survived perfectly in high winds and choppy waters. Infill: Print at 100%…
United States Marine Corps Seal that I designed. It can be used as a going away gift or wall or desk art. I hope you enjoy!
Thanks to TBone9600 http://53rdfac.proboards.com/thread/969/galactic-marine-pepakura For this awesome PEP file. I have converted the helmet thus far and will do the armour as time permits, Cheers Jace Chrissel hope this is what you were…
Automotive / Marine Fuse & Relay Block Printed for the engine bay of my truck, bracket will be self tapped to the inner fender. Relays/fuses not included. used tiny bit of RTV on the contacting edge of the "Panel.stl" Printed "cover.stl"…
This is a 1/100 model of HMS R 10. Other models are over on cults
Marine Anchor STL: Keychain or Decor. Perfect for ocean lovers. High-quality 3D file.
A very big thanks to TBone for having created this model in Pepakura, Check out the link http://53rdfac.proboards.com/thread/969/galactic-marine-pepakura You can also down load this and other pepakura models from TBone9600's link below…
Marine Combat Tank In the darkness of the far distant future, the mutant, alien, and worse plunder the megalopolis cities. Some looking for forgotten technology and precious metals, and others for the sweet taste of Hum’ahn flesh. Despite…
Boats and batteries are sworn enemies - hence you'll always find a master switch to cut all power to the boat and preserve the batteries from being drained when the boat is not in use. The second worst thing after getting to the boat ramp…
The Insert is designed for all components of the game "Ark Nova" and the epxansion "Marin Worlds". The box closes flush and has enough room for the additonal zoo maps and some printed player aids. Everything stays in the box safely, but…
This is a faithful reproduction of the Marina Bay Street Circuit. Its dimensions are 20cm long, 14cm tall, 3mm thick and the track width is 5mm, but you can scale up or down any dimension to suit your needs. As it is a simple model, it…
A submarine perfect for the bath tub
Supports to be provided as required Inspired From an image. Appreciate if you upload make.
Litofania, escudo Infanteria de Marina - Peru
This is an organizer to fit inside your Ark Nova game box. It is a remix of yourarm's original design, and various improvements have been made to make the models more useable and printable. I have also modified many of the parts to make…
