Counting matching models…
In only 9 minutes you can have a Keychain multitool, with 9 tools. Printed 0.2 layer 60% infill, im used Petg Carbon. -Supermarket Trolley 1€Coin -Big hex bit -Small hex bit -Screwdriver -3mm Tyre recommended change -30mm Ruler -Bottle…
Print approx. €0.11–€0.13 excl. taxPreliminary estimate for PETGSource material: PET
Morrigan's Aftermarket parts: Prefix part numbers. Example : All parts starting with A will be Wide Wheels A- 46mm Wide Wheels for 60mm wide AG tires. (over all makes model 14mm wider) 3mm inward and 7mm outward from original wheels.…
Print approx. €0.17–€0.20 excl. taxPreliminary estimate for one variant
This is a model of (part of) the market in Bonesborough from the show The Owl House, including six different stalls, Mr Elixir, Grimgrub's Pub, and the Belos Statue. This model consists of 12 different structures. They are not connected.…
Print approx. €9.39–€11.48 excl. taxPreliminary estimate for one variant
A small token to replace the pound coin needed to release a supermarket trolley. Printed in PLA at 0.3mm with 5% infill. You could cut down on top and bottom layers but it makes so little difference it is not worth the time.
Print approx. €0.07–€0.09 excl. taxPreliminary estimate for one variant
A 2 color double sided redesign for the supermarket coin and holder. I am uploading 2 graphic designs for the cart on the coin. Both look great. This print challenges the bridging capabilities of your printer. I printed it with the Prusa…
Print approx. €0.91–€1.11 excl. taxPreliminary estimate for one variant
Market coin with double version. The regular coin have a keychain hole's. The left side coin don't have the keychain hole's.
Print approx. €0.40–€0.49 excl. taxPreliminary estimate for one variant
This is a model of the middle section of the Bonesborough Market from The Owl House. This is a continuation of an earlier model The Owl House Market and the last two images show both combined. This model consists of 11 structures. These…
Print approx. €8.37–€10.23 excl. taxPreliminary estimate for one variant
I've recently introduced a lot of new people to RTDT, and on my table, it's hard for some players to always keep an eye on the items available in the markets. Therefore, these stands allow for markets that are better visible to everyone.…
Print approx. €0.85–€1.04 excl. taxPreliminary estimate for one variant
I had to replace my power supply for my Prusa MINI and this print is for the aftermarket version that has different plug and wire positions. no support is required.
Print approx. €3.86–€4.72 excl. taxPreliminary estimate for PETGSource material: PET
I wanted to add a bit of playfulness to this, and what's better than the classic, mischievous internet troll? You'll love this if you recognize the Internet meme culture. Fits in your wallet. You can pull the troll out of the trolley if…
Print approx. €0.38–€0.47 excl. taxPreliminary estimate for PETGSource material: PET
Two types of Supermarket cart coin replacement. Can be printed in one or two colors. Tried and tested in varoius supermarkets in Israel. Great idea for a simple present to give to friends and family.
Print approx. €1.02–€1.25 excl. taxPreliminary estimate for one variant
Quick attempt at a simple hook for hobbymarket shelf in my storage room which locks in by turning 90°. Works only for certain types of shelf stands (see photos). Printed in PLA and PETG with little support under the locking mechanism.…
Print approx. €4.25–€5.19 excl. taxPreliminary estimate for one variant
I did this design to offset IDmarket wind blind of 20mm from the window.
Print approx. €2.57–€3.14 excl. taxPreliminary estimate for one variant
The Logitech G535 headset features a swappable headband, but many affordable (and even some pricier) aftermarket bands tend to fit loosely and slip off easily. This small part provides a simple, reliable solution to keep the band securely…
Print approx. €0.04–€0.05 excl. taxPreliminary estimate for one variant
US Quarter Size Shopping Cart Token / Coin Reusable / Removable Key Ring Attachable For supermarket shopping carts... Aldi etc. Customized version of http://www.thingiverse.com/thing:93346 Created with Customizer!…
Five Shekel coin with two key-chains for supermarket trolley (Israel) Print instructions Category: Household Supplies Print Settings Printer Brand: Prusa Printer: Mk2.5s Rafts: No Supports: No Resolution: 0.1 Infill: 20
Optional parts for Thumper (Click on files to see visual 3D files) Narrow wheels fit trailers. Wide wheels technically fit. beware of oversizing. STL files have a Prefix letter. All parts for each set are marked with the same prefix…
Market stall and baskets sized for Sylvanian families or Playmobil. There are links to most of the wares int the picture and to also to a Cash register, coins, extra baskets and stands below. Special thanks to Thingiverse user ritabunny…
ALIX NOZZLE DUCT CONFLICTS WITH STOCK BUILD PLATE HANDLE. IF YOU WANT TO USE IT PLEASE REMOVE THE HANDLE. Fan goes into the same spot as the original model. Screws seemed unnecessary since the friction fit is already pretty good. Make…
Supports required - Scalable - Paintable. Location for your tabletop games. DND etc. Tree Supports on build plate only Partially Powered by image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
This is fan shroud modeled according to the stock shroud on the X1/X1C. You have the following options on which shroud to print: A. Stock Configuration This is the version you need to download if you're replacing a broken stock fan…
I wanted the “stock look” and the mounting schemes provided by the manufacturer of the aftermarket speaker did not fit the tri-lobe stock mounting scheme and I did not want to drill permanent holes in my door. This was designed for the…
Have fun 0,2 2perimitter 10% infill use adaptiv for better Modells
This is After Market Bed FRAME. It is not meant to be printed but laser cut from construction steel !! 4mm thickens is ok. Files are public. You can download DXF and cut it locally. This Bed FRAME prevents the nozzle probe false readings.…
This is a building that can serve as an entrance to a dungeon or market. Scalable. Tree Supports on build plate only Powered by ITree Supports on build plate onlymage-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
This one is made to work with the aftermarket Aliexpress/Amazon hot end. Make sure you take of the plastic handle on the build plate as the longer ducts will hit it. Modeled for 5x3mm magnets. Designed to use heat inserts and bolts to…
Update 12/20/2025: Revised geometry to fit both Tesla Mobile Charger and Tesla Wall Connector (US market chargers only). Added test pieces on Plate 4 of the print profile to verify it fits your handle and cable. I designed my own version…
This handy key chain addition frees up the grocery cart for those that require a Canadian dollar.
Tower to easier identify spires. Holds lowest chip. Additional chips stack on top. Holder for market items. Ring to slightly lift chip-counters in mats for easier rotation. Half the thickness of the mats.
Still a work in progress, it seems to fit up nicely. Uploading for people to tinker with. EDIT: I have changed the design to integrate with the black clip section. It works well so I've ordered it to be SLS printed from metal and will…
AU $2 Trolley Token. Use the new / improved “easy out” paddle version. Or if that doesn't work on your style of trolley the original, in either coin (if you are a rules stickler) and paddle forms, all with keychain holes. For maximum…
I took a break from modelling this week to work on some other projects but I had this idea that I wanted to make a market stall where the bins were interchangeable. I ended up making a couple variants of the roofing as well as leaving…
Speaker bracket to replace the factory front speakers in a Nissan Stagea. This model has been designed to accommodate JL Audio C1-650 component speakers; with 2 options for mounting, but should fit any 6.5 inch speakers. 2 Versions are…
This is the shopping trolley key for substituting the coin of 10 roubles. Allows to take it away right after use. Just turn it left and take out. Originally was published at Thingiverse: https://www.thingiverse.com/thing:3371160
I wanted to learn how to use Fusion 360 and decided to do an improved version of my supermarket coin thing. This version is more durable and a bit easier to pull out of the cart after using it. The stl is sized for a 1€ coin. Due to it's…
WARNING - The mechanical resistance of this device is unknown and unpredictable, since it depends on the kind of material, 3d printer and 3d printing parameters used. Always assume that this device can fail suddenly, and always evaluate…
Designed specifically for the PSA Berlingo (K9) model's aftermarket center console. Manufactured using ABS to withstand varying weather and heat conditions. Features a movable cupholder and an integrated USB cable holder.
This is a remix of gunnarholm's design over on thingiverse. Its designed to replace the existing Nissan Leaf speakers with aftermarket 6 ½" drivers. I split this one in two so it would fit on my prusa mini and it prints with no supports…
I loved the chunkiness of @Josh3d's original design here: Board Game Organizer - Pipeline by Josh-3d | Download free STL model | Printables.com but wanted to also support sleeved cards and the Emerging Markets expansion. As I did not have…
I don't own a normal printer, so I tried to make a 3d printable version of the sign. Original font was too little and thin for it to be 3d printed so I redesigned the whole thing from the ground up. Make sure to do a color change from…
Easy to print keychain, never worry about not having coins for the supermarket trolley anymore! Tested on NTUC, Sheng Siong and Giant trolleys. Print @ any reasonable layer height and nozzle size, as long as you get the general dimensions…
I made a mounting plate for an aftermarket ESC, that will only work with the traxxas lcg chasis. Parts list: screws: M3 X 8mm the plate itself an aftermarket ESC double sided tape If you want you can add a zip tie aswell to make it even…
JDM TUNING LOGO - JAPANESE DOMESTIC MARKET (CAR PLATE) NO SOPORTES 15% RELLENO ALIZADO SUPERIOR
I was tired of having the coal and iron cubes unorganized and sloppy in the marketplace of Brass Birmingham. There are a few box insert prints which have lids which hold cubes, but they didn't work for me. So I designed this from scratch.…
Back at it again with a new model! It's the Market Gardener! And it functions like how a real trench shovel would, including the folding feature. What does Jane Doe have to say about this troll- i mean soldier weapon? "Surrender now,…
Sifon Cooler 40mm for a Supermarket-refrigerated-fruit-vegetable-open-display-cooler. Woow something for scrabble... Vegetable coolers tend to condense, i designed a 3 part sifon that would fit the existing 2 wholes on each side which fit…
I really like the design of the GameBoy Cartridge Storage Tray for OEM Cases by @BlueShell3D and because I wanted a GBA counterpart in the same style for the aftermarket game cases, I designed one myself. It has the same footprint as…
This is an plate to fit aftermarket tweeters (ETON POW 200.2 etc) into the dashboard of an Audi A4/A5 B9. Might fit as well into the Q5 (FY) but i didn't test this. Print in ASA/ABS/PETG 20% infill
In Israel, a five-shekel coin is used to free supermarket carts, The diameter of such a coin is 24 millimeters and its thickness is 2.4 millimeters, I have no idea what is the case in other countries, but I assume that in other countries…
10 Kč přívěšek na klíče, kterým si vezmete vozík v supermarketu a nemusíte s sebou tahat kovový peníze :-)
So my problem was that BMG clones didn't grip the heatsink hard enough and the whole thing sways side to side with the slightest touch to blobs or overextrusions and I wanted to stop that, so I designed this to be super rigid and it has…
Struggled to a find a commercially available fascia to adapt a 2DIN Sony XAV-AX1000 to suit a Subaru Forester SJ 2013-2014 with the Harmon Kardon headunit. This one does fit these exact models, unsure if it would fit other models or…
AX24 - Shortened Aftermarket Servo Mount - Remix Shortened Aftermarket Servo Mounts for the Axial AX24. A couple of mm was trimmed off of the front of the original, moving the servo closer to the center of the vehicle, which seemed to…
Dyson V7 Holder for standalone holder
Instructions here: https://github.com/CapraAudio/SennheiserAftermarketConnectors/new/main?readme=1 Additional Affiliate Links if you want to support us further: Polymaker 95a TPU Polymaker PLA Pro Polymaker PETG
With a simple throw of this dice you can answer your stock buying questions! Each Buy Sell Hold is featured on two sides. 45mm Cube scalable to your preferred size. Entertainment Use only
Very simple Solana supermarket trolley token. Sized for 1€ coins.
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
Low Poly Bakery Market Stall
EN: This is a Creality Sermoon S1 scan of a typical industrially baked bread roll from a supermarket in Germany. The scan was created with 0.2 mm resolution and blue cross, parallel and single lasers. I also did an infrared scan, but the…
Here are two versions of a handle I made to allow us to hold 2 litre bottles more easily. I've also included the bottle-connector part as a standalone model for you to remix with your own custom handle since there are cooler ways to make…
Bring natural beauty to your space with the Supermarket herb pot , a minimalist yet striking plant holder designed for effortless 3D printing and timeless style. Its clean curves and balanced proportions make it a perfect accent for any…
UPDATED - V2 NOW AVAILABLE IN REMIXES. You'll still need nut/bolt info from this model but if you want the TPU bar clip version then get the STLs from the V2 remix. ============================================================ This is…
Remixed from the Original Prusa i3 MK2S. This extruder body can fit a longer 8 mm aftermarket inductive sensor instead of PINDA. I made it to have enough clearance to fit a longer sensor in its original location. Please noted that the one…
part 1: 22×8×4.4 cm part 2: 24×8×4.4 cm slim version: 22×8×3 cm (both parts) changes: • 2024-11-16: added slim version
simple adapter plates for fitting aftermarket off the shelf speakers in your p2 Volvos. These should fit all cars no matter the original spec speakers, 100% fits the in the lower end paper cone s60 speaker spot. The JL audio c1 650x and…
Design Concept The RC Car Aftermarket Wing is designed to enhance the aerodynamics and visual appeal of your RC car. Its aggressive design ensures optimal downforce and stability while adding a unique touch to your model. Purpose This…
Really happy with how this turned out. Short of replacing the whole steering wheel this is the best alternative I could come up with. I find that not having to reach for my phone or reach for the stereo display to answer a call is crucial…
WORK IN PROGRESS Upper wind deflector aftermarket part for Goldwing Motorcycle. Logo model thrown in for fun. Print from PETG to better withstand the outdoors. Category: Replacement Parts
This bracket is intended to be used with the Clarkpads faring for the Master and the headlight located here: https://www.amazon.com/gp/aw/d/B07FDVJTLX?psc=1&ref=ppx_pop_mob_b_asin_title Must be printed in TPU as the bracket will need to…
After many years the original clip broken
Low Poly Medieval Market Stall
This is our new modular market stand. It comes with three Halloween themed modules (pumpkins, decorative gourd, skulls, spiders) which are compatible with our treasure chest. The set can be used to build four different stands. One with a…
This buttons are for Aftermarket PC controllers - that are knockoffs of DualShock 3/4, i recently got a pair of them for my couch co-op pc. As a pc gamer i`m not used to console button layouts so i made a this remix of DualShock 3 buttons…
OnePlus Smart Watch 2. Charger Stand, designed around an after market charger from Amazon, https://amzn.eu/d/i7fQQXG
Since we needed something lightweight to travel and charge the Tonies Box via a USB-C 9V to Barrel Jack adapter I created this simple shape to route the cable through and attach it with a litte hot glue. Super glue should work fine as well.
Hello guys, Simple, multi part print to lay out cards for easier access and viewing, designed to hold the 9 cards market for the board game Aeon's End. But I see more uses for any other board game with cards. Simply print the single…
Low Poly Market Fruit Stall
Minimart mini Shelf Products Pack for Diorama Scene - Snack - Instant Noodle - Cookie Box - Pocky - Yogurt - Pringles
Keep your vinyl crafting workspace organized and efficient! This Make Market Vinyl Tool Holder is a custom-designed desktop stand specifically sized for the standard toolset found at Michaels. Instead of searching through drawers or…
Compatibility I tested it with an iPod Video, thick back. In theory it should work with any iPod with a thick back compatible with the Classic Connect 2 kit . Tested with iFlash dual microSD adapter and a battery advertised as 2000 mAh ,…
Mickey style token for chopping cart
This is a remix of Tasmano's HO version. This version has been resized to G Scale, snow added to roof, and a window.
Low Poly Fish Market Table
I made this Microphone adapter for my Lancer because i really wanted to have the microphone at the original location for my aftermarket head unit in my case its for pioneer but most microphones you can buy on ebay are made the same way...…
This is a remix of MH's model without the platform. Praise be unto him! I printed it with tree supports on an A1 Mini with standard settings. It came out okay, but the supports were a bit difficult to remove, especially the oxtail. Might…
The 1st gen MINI Coopers use a folded steel control arm design and the light-level sensor in the rear left of the car is connected to the lower control arm via a bolted-on bracket. If replacing the control arms (for adjustable aftermarket…
Think fruitfly traps don't need any introduction. Fill glass with liquid of your choice juice/vinegar/beer and close it with printed lid. Was made to look nice and to be sturdy so best printed with PLA+ or PETG with these settings: top…
This is the simplest boardgame insert I've designed, but still one of the most fun to make. In a world full of boardgame boxes too big for the boardgame inside, the boxes for Tokyo Tsukiji Market and its expansion are just perfect, chef's…
These card holders were designed with Clank boardgame in mind considering aesthetics and sizes, though should and do work for most boardgames. I've designed these to hold the adventure row cards (6) with an extra one for times when…
Low Poly Medieval Market Stall
Replacement parts for Gallagher fencing reels are expensive and you need to buy a whole set to replace parts even when its just one part missing or broken. So I redesigned the gearbox to be 3D printed to solve this. You will need to print…
Remix of link below. The first photo is inspo for this creation, the second is how it came out in my car. I made this for my 350z I'm sure it will work for most other cars as the bolt pattern is universal for most aftermarket steering…
Found this stand for an Apple smart watch at my local Action market. Only cost me 3 euros. So that I could use the stand for my Samsung Galaxy Watch 4 Classic, I designed this holder. Simply remove the original plastic part and replace it…
Modification du superbe et très pratique Battery Holder de Saurabh Srivastava ( https://www.thingiverse.com/thing:5764236 ), adapté pour un strap plus large (exemple strap PiratFrames ...) Modification of the magnificent & very efficient…
Use this bracket to mount your cruise controls to a quick-release steering wheel. I used a curly phone cable and cut a phone coupler in half to carry the wires between the harness and control module. Designed to fit an NRG 3-spoke.…
Moneda de carrito de supermercado ( tamaño 2€ ) para llavero. Imprimible con cualquier material rígido sin soportes. Supermarket cart coin ( 2€ size ) for keychain. Printable with any rigid material without supports.
