Counting matching models…
Niche Zero holder for Sage/Breville or La Marzocco 58mm portafilter. Designed to stylistically match the grinder while still seamlessly integrating the stock dosing cup and holder. It is an elegant way to grind directly into a portafilter…
Another design for lamarzocco 58mm portafilter. La Marzocco 58 mm filter holder support for tamping without having to place the filter holder on the work surface. Certainly works with other filter holders but I haven't tried them.
I wanted to try out the “brew by weight” function on my espresso machine. However, with the scale placed on the drip tray, there wasn’t enough space for my coffee mugs. Since we enjoy both cappuccinos and Americanos, I designed an…
Custom fitment adapted from the original. Generated through configuration page on OnShape page. Fits La Marzocco Linea Micra. Mini untested.
30% infill, no raft needed, print upside down.
More magnets over at the Fridge Magnet Collection ! Hardware needed : 20x2mm round magnet Visit www.finecoar.coffee :) Print settings : 0,2 / 0,16 mm layer height 10%+ infill Arachne is helpful, but not a must Thick bridges Ironing on top…
This is a stand to hold both types of portafilters from La Marzocco. I designed it for my own usage because I could not find a version that was sufficiently sturdy and horizontal. this version has a tuned fork to adapt to the specific…
La Marzocco 58 mm filter holder support for tamping without having to place the filter holder on the work surface. Certainly works with other filter holders but I haven't tried them.
funnel for 7gr lamarzocco basket (single dose)) work with 58mm Niche grind cup funnel is magnetized, you will need to insert 4*2mm magnets after printing amz ref of magnet used :…
This is a 3D printable portafilter handle modeled after the standard La Marzocco handles. I printed these in Hatchbox Wood, sanded them with 150 grit sandpaper, stained them with dark walnut wood stain, and finished them with spray can…
Espresso Portafilter Holder (Compatible with Eureka Atom 65E & La Marzocco Linea Micra) Slide your La Marzocco Linea Micra portafilter into place and tilt it up to activate the button on your Eureka Atom 65E. Print it with 100% infill to…
A friend noticed that on his espresso machine would be good to have the option to put the small espresso cups higher up, closer to the funnel. La Marzocco does not provide such an adapter, so I made one. I printed it in PETG, but probably…
Daiso magnets were used for this plate but feel free to substitute with magnets of your choice. I added felt tape over the magnets to ensure the scale does not get scratched. Designed for Acaia Lunar Scale
Modeled a quick little cover for the indicator lights on the La Marzocco Linea Mini. The red light blinks indefinitely while in stand-by mode, and my machine sits parallel to my TV, so the red dot is reflected onto the TV. This solves…
I think a lot of people bought this La Marzocco single shot basket after Lance Hendrick posted about it. It really is quite nice but I didn't want to spend more on accessories like tamps and funnels as I did on the portafilter basket…
My LM Bottomless with Pesado would not sit on the Zerno PF holder due to shape and balance so this adapter makes it all work.
This is a replacement circuit board housing for the decades old La Marzocco Espresso Machine at my friend's church. Apparently, attempting to acquire this housing new from the manufacturer is quite difficult. I've .step files and supplied…
This stand is designed to save storage space when not used. It is able to hold the three standard portafilters that are coming with the La Marzocco Linea Mini. It does not perfectly fit with linea mini R because the new portafilter design…
Requires M6 nut to be placed inside, use glue to keep in place if necessary. Use a high infill percentage (I used 70%) to make sure the weight is well supported. PLA WILL slowly creep under the constant load of the weight of the machine -…
The magnets I'm using are cylindrical. 4mm in diameter and 1.5mm high. Simply add a pause in your slicer at height 124, then put some glue down, add the magnet. Once the glue is set, resume the print. I printed using 0.1mm layer height…
Taller version as the original model Alternative low-profile drip tray for the Linea Mini R. More headroom for tall cups, flexible scale placement, and easier switching between single and double shots. You will need: 2x M3 heat-set…
During high volume commercial usage, the pump motor on La Marzocco's GS3 could overheat and stop functioning until it cools. This is due the proximity of the pump to the large steam boiler and lack of cooling. The models uploaded here is…
Alternative Drip Tray for La Marzocco Linea Mini with reduced height I’ve been tinkering with an alternative drip tray design for the La Marzocco Linea Mini R to address a comon issue: limited vertical space when using tall cups or…
Niche Zero holder for Sage/Breville or La Marzocco 58mm portafilter. Designed to stylistically match the grinder while still seamlessly integrating the stock dosing cup and holder. It is an elegant way to grind directly into a portafilter…
![[finecoar] La Marzocco Fridge Magnet, Trinket, Badge](https://media.printables.com/media/prints/766202/images/5982859_b75ce2b1-9c05-4248-aea9-dadf4f05b914_4b3ff1a7-3289-4fac-925d-2861b75a2782/p1040377.jpg)
