Counting matching models…
Back gun massage adapter, wall mounted to fit the Renpho massage gun: https://www.amazon.ca/-/fr/gp/product/B08C298RYR/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1 Printed in draft mode with 4 walls and 0,4mm nozzle. Used PETG as it…
Token holder for Mass Effect the board game priority Hagalaz. Fits inside the original box with a blade tab to lift it out as required. Printed using a bambu P1S with 0.20mm standard. 96g of filament. 170 layers. 2h 52m
You can glue a 10 x 1.5 mm round magnet in the base. Print instructions Recommended infill angle: 90° Low speed and high temperature will create a shiny top surface. There are "holes" inside the model to make some of the top layers more…
---- 𝑰𝑵 𝑪𝑶𝑵𝑻𝑰𝑵𝑼𝑶𝑼𝑺 𝑫𝑬𝑽𝑬𝑳𝑶𝑷𝑴𝑬𝑵𝑻---- Mixed collection of keychains deriving from social media, entertainment platforms, video games, etc. Over time I will expand this collection by adding others with their respective instructions for…
This badge is 45mm x 145mm. The applications are printed separately and clipped afterwards into the badge. This way, you can create a multicolored print without needing a printer that supports multicolor printing. The applications are…
A simple yet nice Christmas tree for decorating shelves, desks, dining table etc. print whole or print in segments, print small o huge.
Massager with smoothing effect. For connection you can use 6 bolts M4 20 mm. The dimensions of the massager are 110x110x63 mm. A massager for the back, legs and abdomen. Массажер с эффектом разглаживания. Для соединения можно…
Simple generic box for scalp head massager. Keep the massager legs safe from bending or tangling. Print Settings Printer: DiscoEasy 200 Rafts: No Supports: No Resolution: 0.2 Infill: 10% Notes: due to my crappy printer precision, i could…
I created this model to fit my hand (The finger hole is 80 mm) and its fit perfect. Check the size before printing and, if necessary, change the size in the slicer. Printed from PET-G filled 75% for greater strength.
Made a design that fits for this model: Uses a 10mm wooden dowel.
Przelotki mają pierścienie o średnicy 63.5mm Do drukowania potrzeba zastosować podpory w gniazdach XT60E-F Są dwie wersję.
tisknu na stojato s 5 perimetry a výškou vrstvy 0,15 - PC Blend, ale v nouzi bude fungovat každý materiál. I print standing up with 5 perimeters and a layer height of 0.15 - PC Blend, but any material will work in a pinch.
See my collection for other Thermo models
This Infinity toy has small spikes. It stimulates the hands while playing and can be used like a massage ball. New: When the spikes are folded outwards, there are pairs of spikes on the inside that interlock, making the ball more stable…
Intro This Mini Massage Roller is a simple, effective, and easy-to-print self-care tool that helps relieve tension and stimulate circulation in your hands, feet, and face . Roll it slowly over sore muscles or tense areas for a soothing…
Massage knob This Massage Encoder Knob is a dual-mode DJ knob designed for comfort and precise control. The knob features a ring of massage bumps around the entire circumference , allowing your fingers to relax while you play. In its…
Description: This model represents a low-poly stylized Lamassu (also known in Persian mythology as Gopat Shah ). It is a majestic protective deity, depicted as a hybrid creature with a human head (symbolizing intelligence), a massive…
I wanted to have a softer head attachment for the Hypervolt Go 2. I wanted to be able to massage the tops of my feet or other areas where the bone is very close to the skin. The OEM head is way too hard for that in my opinion. I printed…
This whistle includes the phone number for the LUCE hotline ( https://www.lucemass.org/ ), which is used in Massachusetts, USA. The text is raised on the model, so you can print with a color change for better visibility of the phone…
The Geth character from the legendary Mass Effect game, Legion, is one of the iconic characters for me. A highly scalable model in polygonal structure, it is almost an artificial character. Enjoy using it!
FIND MASS LUCE HERE Info on what they are for and how best to use them copied from this WA-based organization : Why Whistles? Instant alert system Simple, cheap, effective Noise = visibility Turns silence into community action Warns…
For Massachusetts: Think You SEE I.C.E. in your area? CALL LUCE HOTLINE: 617-370-5023
Update 3.3.2026 Added a slight angle on every second output slit to create a wider, cone shaped showerprofile. Added two more brimtabs and did some minor fixes on the model.. I also took 0.15mm off the impeller width as it was…
Made a design that fits for this model: Uses a 10mm wooden dowel.
This is a detailed decorative bust of U.S. Congressman Thomas Massie, created using MakerLab’s Make My Statue tool with tweaks to the mesh to achieve the best possible surface quality and likeness for FDM printing. The model is intended…
Part of my attempt to make this game more table/storage friendly. It replaces the need to use all the minion miniatures while playing. It has recesses for the Mob Item, Aura (if using them). There are two version included in the file- a…
Unfotunatly my daugther lost both of her ski pole baskets and so I decided to print some spare parts. I tried the baskets from @desmodog_601534 But since I did't use flexfilamet, they broke quite fast. So I had to design it for my own.…
this is a mount for a massage gun to mount to a table top or a horizontal ledge. Feel free to revise it or whatever. Comment what you come up with.
Massey Ferguson LED Lamp Bring the iconic Massey Ferguson identity into your home, workshop, or office with this 3D‑printed LED display lamp . Designed with clean lines and a modern circular shape, this lamp highlights the famous…
Heyho The massage roller combines harder Materials as a core and bearing and softer, flexible TPU as outer material to make it more comfortable to use! Design: I designed the TPU and Hard material parts so they bond together nicely and…
Well as written. Works as help to stimulate milk glands. By logic - works well if little smoothed, as after print it can be little "sharp" under the supports. I put also my gcode which worked well for Ender 3 V3-KE, at least support…
A simple TPU peanut ball for back massage rolling. The sides are flat instead of round, so it's easier to print and can be stored standing. You can also add text to the flat side in your slicer as a note if you want print multiple ones…
A huge, bold, and ultra-flexible spider designed to dominate your build plate. This XXL version brings exaggerated articulation, long flexible legs, and smooth movement in one powerful print. Perfect as a Halloween decoration, desk…
Fidget Gear – butterweich gleitend, perfekt passend & modular! Jedes Gear besteht aus 5 Teilen – die Montage ist super einfach, und bei mir passt alles haargenau zusammen ohne Kleber Ich habe es intensiv getestet: Kein Spiel, weiches…
Rolling Foot Massagers for Plantar Fasciitis – 3 Styles Find relief from plantar fasciitis and/or foot tension with these ergonomic rolling massagers, available in three unique styles. Each design offers a slightly different feel to…
Super smooth massage roller. No other hardware needed. The fitting for rods and cap are permanent.
Here he comes, Lionel Massive running down the field knocking down anyone in his path.
I was sick of rolling over in bed and being surprised by a spikey massage ball hidden in the sheets, cause my wife loves them and uses them when lying in bed, but we don't have a good place to store them so they are always rolling all…
Heavy-Duty Skateboard & Surfskate Stand I wanted to design a heavy-duty skateboard and surfskate stand for the office, one that would keep my boards secure when I ride them to work. I based the design on a wooden version I saw online. The…
You need supports to print this. The holes for the bearings are 22.30mm in diameter. I glued the bearings instead of pressfit. For the assembly I used 4x M4 screws 4x threat inserts (connector.stl) Bearings are 608zz…
I have a massage table and mounted transducers to the bottom of it to make a sound bed. I needed a holder for my Fosi Audio TP-02 subwoofer amplifier to hold it on the side of the table. Obviously, there were no designs this specific, so…
Rolling Foot Massagers for Plantar Fasciitis Large Foot Find relief from plantar fasciitis and/or foot tension with these ergonomic rolling massagers, the design offers a slightly feel to target pressure points and promote relaxation. The…
If you like this model, don’t forget to check out my other creations in my collection — you might find something else you’ll love 😉 Link to my Trolls & Monsters collection! ❤ https://www.printables.com/@Paja/collections/3327491 Thank you…
If you like this model, don’t forget to check out my other creations in my collection — you might find something else you’ll love 😉 Link to my Trolls & Monsters collection! ❤ https://www.printables.com/@Paja/collections/3327491 Thank you…
✖ | Sharing without ATTRIBUTION ✔ | Remix Culture allowed ✔ | Commercial Use ✔ | Meets Open Definition ℹ | Share under the same license
Remove the rubber part from another attachment and put on this. Diameter: 18.5 cm Print the connector_test first to check if it fits your massage gun.
What you need: USB-C Charging Chip 2x 18650 Batteries Switch Motor 7x 20mm M3 Screw 7x M3 Nut Links (affiliate): Charing chip: https://www.aliexpress.com/item/1005004846748321.html?spm=a2g0o.order_list.order_list_main.132.22911802I0LoA4…
PUT THE MODEL IN 250% SIZE! This is a ant mansion that has a bed for the ants, a sculpture of a human, a tree, food pot, and a ramp the can go over.
TheJunkDrawer created a perfect ME Mako, all I did was split it to fit on my Anycubic Mono, add connection pegs and a decal sheet created in Photoshop. This model is meant to be resin printed and I included extra door handles due to being…
I couldn’t find a massage ball that was both firm and large enough to effectively roll out my tight hip and glute muscles, so I created this one. It’s the ideal size for me. It’s large enough to use on the floor without your body sinking…
Motivation [ water kefir production ] Water Kefir is a drink made from water, sugar, lemons and dried figs. With the help of "water kefir crystals" (living organism), a prepared mix of ingrediants turns into a drink (similar to lemonade)…
This is one of my first prints, I will attach photos, but mine was printed a bit too flimsily, would probably consider at least 20-30 % infill. No adhesive. It's a simple stencil of the Mass Production Unit series from Evangelion, my…
Not much really to add- a simple stencil design. I would reccomend using at least 20-30% infill if you want a lot of reusability from it. The smaller you make it the less high quality it will be.
Inspired by a recent trip to Rome, this device came in handy many a time near a crystal-blue Italian stream. To assemble, you'll need: 1x AAA battery 2x contacts of the 9.5mmx9mm spring plate variety 1x Push Button Switch of the 12x8mm…
This is a back massage roller designed to be entirely 3D printed. No additional hardware required! UPDATE: 15th Feb 23 - It's a win! :) Also added a slightly improved wheel print that should spin easier. There are a -lot- of components to…
This is my take on how to handle a lot of tokens. There are two sets of numbers that can range from 0-99. One on top and one on bottom. The bottom number can represent the total amount of tokens you have. While the top number can…
I wanted to test a different way how to put bearing in the design so I created this spinner and accidental massage tool. Bearing used: https://vi.aliexpress.com/item/32717527870.html Can be adjusted for other ones easily - Fusion 360 file…
PLA @Füllung 20% @Schichthöhe 0,3mm ohne Stützen, ohne Rand Bei Version 1.0 fehlten 2 Löcher für die Kugeln 😒
essay massage gun pinofit booster on the orginal attachments, the rubber cap came off during the massage thatis unacceptable the attachment has already been sufficiently tested and is very comfortable printed at 0,2 (5-7%filling) TPU…
This miniature sculpture captures the incredible majesty of the Mont Blanc Massif, one of the most iconic and fascinating mountain ranges in the world. Its towering peaks, reaching for the sky, are a symbol of grandeur and natural beauty.…
Gedruckt mit 0,2 mm Layerhöhe, 10 % Infill und 5 % Stützstruktur aus TPU A85. TPU A85 semi-soft von Extrudr Dieses Filament ist auch druckbar mit Bowden-Extruder. This filament is also printable with Bowden extruder…
Made this to replace my moto massage on my Hot Springs hot tub. Printed with holes facing plate @ standard setting no supports. Category: Replacement Parts
This is a Christmas Tree Ornament featuring a simple yet elegant design perfect for the holiday season. The ornament consists of a circular frame with a stylized pine tree in the center and a crescent moon on the right side. This is a…
This is a replacement ring for your Sennheiser HD650/HD6XX headphones that allow you to attach a Massdrop/Drop.com Minimic. It features a 3.2mm clamp as well as slits to fasten your microphone more securely if needed. In my case, I used a…
This is a multi material print in PETG and TPU. Print in the same manner as the original except for the arm which you print with PETG and TPU. Edit 9.16.24: Smoothed out the ends of the TPU Hook so the edges were more comfortable.
This was printed in TPU and PETG, you could print the whole device in TPU. You can roll onto the device to massage your lower back, hips, or glutes.
Just place the roller on the floor, place your foot on it and roll back and forth. Gets your leg moving at the same time as applying pressure to the arch of your foot! Print instructions: Print in the orientation of the 3mf file, will not…
One day, while browsing the internet, I found these physical therapy tools and thought of designing them in 3D. I traced a photo and created a basic 3D model. Not for professional use For educational purposes only I am not responsible for…
Over the summer while visiting relatives in Massachusetts, I attempted to use my revopoint miraco to scan as much of the dinosaur footprints as possible in holyoke. The Revopoint Miraco uses projected infrared light to track it's position…
Replacement part for Massey Ferguson and SDF tracktors with cod: 0.007.5562.0 I used PLA but also PETG can work well
Hallo, ich habe mir einen Aufsatz für meine Massagepistole gedruckt. Passt auf Hersteller ABOX. Ich habe mit Stützen gedruckt. PETG. Die Druckdaten habe ich leider nicht mehr. Auf dem Bild ist das Originale in Schwarz zu sehen und…
The yawara stick is a Japanese self-defense weapon brought to US police departments in the 1930's and popularized by comic strip character Modesty Blaise in the 1960's. The more modern kubotan is a variant of the yawara stick. But because…
It's a simple massager for heads that can help itch and relax.
This topographical map was made using Google Earth data and then merged to create a printable file. The topography is split into six tiles for easier printing on smaller bed sizes. The details on the bridges are messy, but when printed at…
Hey Everyone, here i post a design of scratcher cum massager. you can use it without giving effort on massager just roll on your body and enjoy. it can improve your blood flow also. you can remove rollar from assembly and use it as a palm…
II designed this back scratcher to be more than just a simple tool: with the massage balls on top, it also doubles as a convenient massage device for gentle skin relief. The sleek, functional design allows it to stand on its own , making…
Scalp Massager – Stimulator and Stress Reliever Product Description: Introducing the Scalp Massager, a simple yet highly effective tool designed to stimulate your scalp and relieve tension. Instead of traditional steel wires, this…
My house has a lot of scratchers. But Finally, my wife still forces me to scratch her back with my finger. Before scratching, must cut your nails,cut nails too short will makes scratching ineffective. too long, will get complained.…
If you're a fan of our YouTube, you've seen our logo in 2D. Here it is in 3D!
Maybe the most overengineered-looking head massager in the 3D Print Market? You would be correct. I wanted to design and create a talking point piece that sits in people's homes and makes them ask, “What is that?” A gadget that would…
These are 5 mm high, and the design is .5 mm above that. You'll want to change colors just above the 5 mm mark. The other coasters I've seen use Bambu and have colors all in the same layer. I don't have an AMS or MMU system, so I made…
I made a BMI turnplate(Body Mass Index). According your height and weight are corresponding to BMI(Body Mass Index), Draw a conclusion that is body weight and health status. Instructions: Rotating the turnplate,The value of the outer…
Przelotki mają pierścienie o średnicy 63.5mm Do drukowania potrzeba zastosować podpory w gniazdach XT60E-F Są dwie wersję.
Massringe fuer Hundehalsband Anwendung: Dieses Projekt ist eine Kette von Massringen zum Anfertigen von Hundehalsbaendern. Die Ringe sind stapelbar. Jeder Ring hat ein Faehnchen fuer Beschriftungen. Diese Masskette beinhaltet Ringe des…
Parametric design in Rhinoceros and Grasshopper. Probably more suitable for peeling than for rough scratching. You can either use the shorter printed handle or add a wooden (beech) 10mm stick as a handle. It can be secured with a small…
Massage, schratch and grip tool Version: 1.0 Stage: trial Description: An aid not only for scratching and massaging, but also for simplifying the life of disabled people. The device consists of a handle and 6 attachments. They are a…
This neck massage scraper is for relexation of the neck's muscules. Due to the print-in-place stl.-file the tool can be used right away without assembly. Feel free to print the rollers in TPU filament for a smoother feeling!
This tool allows you to scratch yourself or have a little massage. (But honestly - it's just much easier to ask somebody else to scratch you or massage you.) Print settings: No supports (but you have to put it on the right face) Models…
This model is aimed to make a person's life more comfortable which can range from severely reducing foot pain to quenching a small itch on the foot with a much needed scratch. The foot is a difficult place to reach with our own hands and…
Massage belt Version: 1.0 Stage: trial The massage belt is ideal for massaging the back, but it also works well as a massage for tired calves and thighs. Or to all the places you can get to. The belt has two working positions, one with…
A foot massager design that has been used in the Far East for years. With 15% filling, 3 outer walls. PLA or other filaments can be used (except TPU). Loaf and massage rollers must be pressed horizontally and support is required. Put…
I find the single screw doesn't create enough force to clamp XT60 connector down so they always slip out with enough force. I've created this remix using zip-ties which hold it in place for sure. Modifications: Removed screw, added holes…
