Search results: mbar

Vince Lombardi Trophy

This is a fan creation, and the .STL is true world scale. The .gcode file I uploaded is scaled to my Mini volume. Supports needed under the bottom tip of the football.

Add-ons for Monorail Mark VI done by Bombardier for Walt Disney World

The original model of the Mark VI monorail done by bradkoerner can by found at https://www.thingiverse.com/thing:5020822/files. Thanks Brad for this very nice model.

Bombardiro Crocodilo

Bombardiro Crocodilo

Lumbar puncture simulator - enclosure (prototype)

This is a prototype enclosure for lumbar puncture simulator. It uses 3D printed lumber spine anatomical model from ALiEM. It is designed as an alternative simulator enclosure when the silicon for molding is not available. Manufacturing…

Super Bowl Lombardi Trophy

DESIGN INTENTS Fun trophy for our annual Superbowl night with friends This is a 50% sized Lombardi trophy. Not an exact replica, some parts were redesigned Designed for 3D Printing = no support needed All details are in the PDF uploaded:…

Bombardiro Crocodilo

Bombardiro Crocodilo created in blender

Lombardi Fantasy Football Trophy

I decided that instead of money, the winner of our Fantasy Football league should get a trophy. Naturally, I designed it after the Lombardi. However, since it's a Fantasy League Trophy, I figured I'd name it after the greatest Fantasy…

Bombardino crocodilo

bombardino crocodilo

Bombardier CRJ700 - 1:100

Model description The Bombardier CRJ700 is a regional jet airliner that was designed and manufactured by Canadian transportation conglomerate Bombardier (formerly Canadair) between 1999 and 2020. Their design was derived from the smaller…

Bombardiro Crocodilo Italian Brainrot High Detail

Bombardiro Crocodilo in high details Supports must be enabled Dimensions: 80 x 69 x 24 (mm) I used around 11 grams of filament in total

Lumbar vertebrae

This spinal colum section was generated from a CT scan, the 3d model was generated from a DICOM file then processed into a 3d mesh and cleaned up in blender. The purpose was to print a learning spine for anesthesiologist students. Printed…

Lombardi Trophy

Lombardi Trophy Print Settings Printer: Anycubic Vyper Rafts: No Supports: Yes Resolution: .2 Infill: Cubic Category: Decor

Vertebrae of lumbar spine - Wirbelkörper lumbal

3D model oh a human lumbar vetebrae

Bombardier CRJ700

A nice little aircraft that took a relatively small amount of time to make, and is at the same scale as all my other aircraft. Scale 1:400.

Chiefs Lombardi Trophys

In honor of the Chiefs winning Superbowl LVII, A remix of https://www.thingiverse.com/thing:1463245 to include the chiefs arrowhead logo and the superbowl logos from the years that the chiefs won. The picture is of the most recent two…

Renault Megane Mk III Lumbar Support Lever Cap

The cap for the lumbar support adjustment lever of a Renault Megane Mk3. it is is designed to only fit in the correct position.

Philadelphia Eagles Superbowl LIX Lombardi

Version 2. This one has the football stitch on top. Designed for Flashforge 5M Pro but should also work on other printer Designed using Orca Slicer 2.2.0 (if you can't open the .3MF nor .GCO files, open them using this app instead) If…

Gerber Armbar Drive pocket clip updated

Print as shown on the screenshot, without supports. I've used 0.4 line width, 0.2 layer height, PETG filament. The part should fit very tigth inside the holes, use some force. No screws or glue needed. It doesn't make one-hand operation…

Bombardiro Crocodilo

Figura Remix de los memes de Tiktok Bombardiro Crocodilo

Fantasy Football League (FFL) Plate for Lombardi Trophy

I printed @EDnation's Super Bowl Lombardi Trophy to be a first place trophy in my Fantasy Football League. I wanted an FFL logo instead of the NFL logo, so I remixed the design of the included NFL plate. Remixed in Tinkercad. Get the rest…

Lombardi Trophy Kansas City Chiefs Superbowl LVII 2023

The Vince Lombardi Trophy with (non-official sized) NFL-logo and Kansas City Chiefs logo with Superbowl LVII 2023 watermark. Ball printed seperately and then glued together. Print the stand with support for the logos. Remix of various…

Rambarde Batignoles H0

Rambarde type Batignoles 2 sections Impression résine Category: Buildings & Structures

Bombardier BiLevel

HO scale model of the Bombardier BiLevel Commuter Car. The car has become a staple in North American commuter service with over 1,500 built and more being produced. This contains all the files needed to print your own. The trucks for the…

True Innovations DPS 3D Insight Gaming Chair Lumbar Support Replacement

Replacement Piece For the True Innovations DPS 3D Insight Gaming Chair, This Connects The Rotating Lumbar Piece Under The Head Rest. You Will Need Hardware From The Existing Chair Since This Only Replaces The Rubber Arm. Installation…

Lombardi Trophy Remix no bolt/screws

This is a remix of @EDnation's Lombardi Trophy that replaces all of the screws with pins. I wanted to make this model but I didn't want to get the hardware to put it together so I replaced all of the screws with pins and tampered with the…

Lumbar Vertebra (L1) Keychain – Anatomy Model | Medical Student / PT / Chiropractor Gift

A compact, detailed model of the L1 lumbar vertebra , designed as a small anatomy reference or unique medical-themed keychain. This model balances recognizable anatomical features with clean, support-free printing, making it ideal for…

Llavero de hueso lumbar

Llavero de hueso lumbar. Se imprime con soporte Ideal en altura de capa 0.2 Nozzle 0.4

[Updated] Costco DPS Chair Silicone Lumbar Support Replacement

DPS Lumbar Support Replacement Part ===================================== April 23, 2025 - Version 2 is now available! Adjustments were made to the original model based on user suggestions and comments, changes include: Changed dimensions…

bombardino cocodrilo

bombardino cocodrilo 3D MODEL

Lombardi Trophy Kansas City Chiefs Superbowl LVIII 2024

The Vince Lombardi Trophy with (non-official sized) NFL-logo and Kansas City Chiefs logo with Superbowl LVIII 2024 watermark. Ball printed seperately and then glued together. Print the stand with support for the logos. Remix of various…

Bombardiro Crocodilo

A chunky, adorable crocodile with a twist—this one’s geared up with tiny retro-style armor plates and a bold stance like a mini tank! With a wide grin, dot eyes, and stubby limbs, Bombardiro Crocodilo brings vintage toy vibes mixed with a…

Rambarde type PO echelle H0

Rambarde de type Compagnie du chemin de fer du Paris Orléans Réalisée d'après photos Impression filament Print Settings Printer Brand: Artillery Printer: Artillery Sidewinder X1 Rafts: No Supports: No Category: Buildings & Structures

Kansas City Chiefs Vince Lombardi Trophy

Remix of jasonalt529's great looking Vince Lombardi trophy. I only remixed the stand, the football STL remains unchanged. I recommend printing with the trophy leaned 45 degrees towards the back. This does not require you to activate…

Subaru Sambar bed parts

These were designed for my ‘96 Subaru Sambar. Many pieces aren’t made so the only option is shipping used from Japan, so figured this was a good option. Still new with Fusion, and my reference pieces are old and the tail gate has some…

SKODA Octavia detachable trailer hitch cover / Abdeckung für abnehmbare Anhängerkupplung

When you detach your trailer hitch you end up with a lot of grease in your hands and eventually everywhere you'd like to put it (most likely in your trunk). So print this cover and your fine putting it away without covering everything in…

Bombardiro Crocodilo – Meme Legend

Straight from the depths of internet brainrot, Bombardiro Crocodilo is here to bomb your print bed with absurdity and style. This legendary meme character – half crocodile, half bomber plane, 100% chaos – is now available as a detailed 3D…

Guitar Hero Wii *Les Paul cherry MX strumbar bracket

this is an original design, just reuploaded to printables https://www.thingiverse.com/thing:4783829 DISCLAIMER: I've only tested this on a gametime buddies guitar, however it does closely resemble a wii les paul, down to screw hole…

Bombardier Beetle

This is my Bombardier Beetle. This model was made for a fellow Patron of MZ4250 Thingiverse Printables who requested it on the discord server that is available for every Patreon tier. A remix of a model made by MZ4250 Thingiverse…

Bombardiro Crocodillo

Bombardiro Crocodillo generated with AI Image used for generate 3d in picture Background of image removed with: Adobe lightroom / You can also use Microsoft image editor, which have implemented automatic background remover Ai generated…

Windsurf Trimbar

Tool for trimming your windsurfing sail. Check our board protector on www.bumpr.be

Abnehmbarer Griff passend für Monsieur Cuisine Compact/Connect

Ein Abnehmbarer Griff für den Topf vom Monsieur Cuisine. Für ein besseres Handling.

Bienen Wasserspender (schwimmbar f. Pool)

Bienen Tränke selbstschwimmend für Pool Die stilisierte Biene ist etwas erhaben, so, dass diese mit einem entsprechenden Slicer eingefärbt werden kann. Die erste Schicht schwimmt oben. 8/2025: Jetzt auch mit “dickerem” Rand für bessere…

Thumb pin for the Gerber Armbar

ENG: Thumb pin for the Gerber Armbar This model is intended for those users who own this tool and who prefer a simpler, one-handed opening with a pin to the awkward opening of the blade on the original. The pin is printed in about 11…

Bombardino Crocodilo Hue Forge

I am learning with the Hueforge software, so I decided to share some of my work with u guys. You can find all informations about printing in the text document under. Don't forget about changing all the setting in your slicer. Enjoy :)…

Bombarde

Is not mine is the great work of Arnaud29 on thingiverse. Look at the link further. https://www.thingiverse.com/thing:3969585 I simply Make one for my wife birthday. Print instructions Print in PETG Nozzle : 0.4 Layers : 0.15 Fill : 50%…

Subaru sambar Shifter bushings

Subaru sambar Shifter bushings to my KS3 sambar 1995 May or may not fit KS4

Lombardi Trophy Football holder / Stand

A cool lombardi trophy looking footbal stand for mini footballs no supports needed only 180 g

cute crocodilo bombardino

Cute Crocodilo Bombardino

Subaru sambar oil seal install tools

Subaru sambar oil seal install tools to get the seated properly

Subaru Sambar Door Handle / Inner Knob

Subaru sambar door handle Test fit video

Subaru Sambar dash tray

This is a basic model for an insert into the upper dashboard pocket on a KS4 (90's) Subaru Sambar. I used it with a phone holder model I found on here, though I don't see it currently to give credit. But would be a good base for a gauge…

Subaru sambar Gear linkage bushing

Subaru sambar Gear linkage bushing rear 4 pcs needed and 4 orings 14x19x2.5mm Abs or other heat resistant material recomended

"Subaru Sambar" Japanese Kei Truck

i did this for an hour in tinkercad sp sry for anything that looks bad especially the right side and i also hate how the top it a little too tall sinc it came from teh van version. Im printing it now will post update photos in a few hours…

Subaru sambar speaker screw clip

Subaru sambar speaker screw clip 3mm hole and 4mm hole depending on what screw you using In hot climate print in ABS or ASA

Lombardi Trophy

easy to print Lombardi Trophy

Frosthaven Summons: Bombardier

Here's the proxy model that I made for the Frosthaven Summons, the Bombardier! The artwork for this summons is online at…

Bombardier CRJ 200 Model Airplane

This is a model aircraft for display.

Bombardier ATV keychain

As I lost my original key I needed to make a keychain so I could find the key easier. I made it for my ATV Bombardier 400. Print it with PLA. You can resize the model as per your needs. I recommend to print it with PLA two colors, so the…

Bombardiro crocodilo

Articulated Flexi Keychain of the iconic brainrot meme character Bombardiro Crocodilo

Age of Empires Bombard Tower

Closed in the top floor and added cannons. When printing, make sure to include supports under the cannons and a brim at the base to keep it stuck down on the plate. I uploaded my .gcode version at 0.05mm Ultradetail with supports as…

Bombardier CRJ-900 Wall Art

Bombardier Canadair Regional Jet 900 Wall Art Silhouette model. Adjustable size. I accept model suggestions.

Passat B7 Lumbar Support Lever

Lever for adjusting lumbar support on front seats of VW Passat B7 (probably even more VW models, but IDK I don´t own more of them 😅). It fits both driver and passenger side. The one in photo was printed on i3 mk3s+ using Prusament PETG…

Isambard Kingdom Brunel Statue - Supportless Remix

A model of Isambard Kingdom Brunel, adjusted to be printable without supports. If your printer has good cooling, this model will print well without supports. Roughly 145mm Tall Pictured model printed in Esun Black PLA and Prusament Viva…

Remix of Gerber Armbar Drive Pocket Clip with hook and 2 screw holes

I wanted the extra strength from a second screw, so I remixed this. The original was great, I just wanted the extra strength from the second screw. I would definitely recommend PETG or PETG-CF for these clips. Use 2x m2.5 nuts and 2x flat…

Subaru Sambar Dash Cup Holder 1990-1998

I printed in ASA for heat resistance and durability. Printed on Sovol SV04. Friction seems to hold it in place pretty well, but you could aways add some double-sided tape or Velcro to the rear bottom tab to hold it more secure. I designed…

Spelljammer - Giff Bombard (28mm scale)

Ok, I'm working on splitting it into pieces that will fit on a 200mm x 200mm build plate. DO NOT PRINT the “Complete” file! That's just there to help you understand how it fits together. There's also a elf there that I did not design for…

Canadair CL-415 Water Bombardier

Canadair CL-415 Water Bombardier Used to put out forest fires.

Abnehmbare Seifenschale (Removable Soap Tray)

Seifenschale oder Ablage für einen Schwamm etc.. Die Schale wird an die Wand geklebt. Es gibt zwei Varianten: Variante 1 besteht aus einen Teil. Variante 2 hat einen Halter, der an die Wand geklebt wird. Auf diese Weise kann die Schale…

Embarrassment : Inside Out

Embarrassment : Inside Out

Herman Miller Aeron Lumbar Plate

This is a replacement part for my chair's cracked lumbar plate. I printed it in a fairly rigid TPU, and it's working nicely so far. The lofted surface has some pretty complicated curves that get chewed up when exported at low resolution,…

Lombardi 2023 Champion

Introducing the Remake Lombardi Trophy, a prestigious symbol of triumph in our fantasy football league. Crafted with meticulous detail, this trophy stands as a testament to the competitive spirit and camaraderie shared among participants.…

Vince Lombardi Trophy Keychain

Its Superbowl Time! Print a Vince Lombardi Trophy that fits into your Pocket! Print Settings Printer: FDM Printer Rafts: Doesn't Matter Supports: Yes Resolution: 0.2mm Infill: 20% Category: Keychains

Lombardi Trophy Vase (Vase mode)

No supports needed, glue together both football parts while on base. You could glue football parts separately then friction fit it on the base but I don't recommend it. VASE MODE

HO Scale Bombardier BiLevel Details

I took this model which was good and tried to add some more details to make it more realistic. The end face for the cab car has 2 options, 1 with holes for LEDs and 1 without. The bogies look pretty good but did not roll well so I ended…

Subaru Sambar passenger side cup holders

This is a tray made to hold two cup holders. Print the tray first standing up, then cup holders separately and glue on. At least that gets the best looking print in my opinion. Remix to your hearts content. Printed in PETG.

Embarassment Wall Art #1 (Inside Out - Vice Versa)

A great wall art of Embarassment (Embarras), from Inside Out (Vice-Versa). Do not forget to LIKE the model and upload your makes, thanks ! Inspired by a sticker

Subaru Sambar Door handle

this model is a close replica of the original inner door handle for my 2000 Subaru Sambar Kei truck. it uses the original bushings for the fasteners, they could be modeled and printed, but the original machined parts would be better to use.

Abnehmbarer Wandhalter für Ikea Gewürzgläser ÖRTFYLLD/ Removable wall holder for Ikea spice jars ÖRTFYLLD

For English see below Dieser Halter ist für 16 Ikea Örtfylld Gewürzgläser geeignet. Der "Glashalter" wird von 4 Magneten gehalten und kann zum Reinigen abgenommen werden. Der "Wandhalter" wird mit 4 Tesa Powerstrips unsichtbar auf die…

Deep Strike 9-Inch and Embark 3-Inch markers

Deep Strike 9-Inch and Embark 3-Inch markers for 40K or similar games. You can print in two colors, doing a "filament change" at a specific layer. Check my other designs for the 3-Inch "Embark" marker. Mirror from…

Vhorlath Realms – Dwarf – Grimbarrel Thundergunner (Dark Fantasy 3D Printable Miniature STL)

Vhorlath Realms – Season II: Shadowed Empires The Grimbarrel Thundergunner is a hardened dwarf ranged specialist, carrying the thunder of the mountain holds into the shadowed frontiers of Vhorlath. Grim, steady, and built like a fortress…

Abnehmbarer Tuerverschluss mit Kabelführung Ikea Enclosure

I am to lazy to always unscrew the clasp out to reposition the display and cabels so i designed me a pushable splitted clasp.

Bombardier Dash 8 - Q400 wall art

Bombardier Dash 8 - Q400 model wall art if you scale it down or up just keep the z scale at about 3mm, .4 nozzle, .2 mm layer height 15%infill

Klemmbarer MTB Federgabel-Stopfen (mit Werkzeughalter)

Klemmbarer MTB-Federgabel-Stopfen für Rockshox ZEB und Fox 36er (inkl. Kettenschlosshalter, Kabelbinderhalter und Gafer-Tape Der Stopfen wurde aus TPU gedruckt (100% Infill), die Klemmung aus PETG (50% Infill). Wichtig: Bei der Klemmung…

Efteling onoembaren beeldje

Kat

circuit board vice clampable. Schraubstock für Platinen Klemmbar

Circuit board vice for clamping or other similar workpieces. You will need a compression spring round about 17.5x10mm. To tighten the worpiece, press the silder against it with the latch pressed down. Release the latch when the Workpice…

Roku Streambar wallmount

I needed to mount a Roku Streambar to the wall under the TV. I printed 2 of these out of ABS at 40% infill. I only used ABS because that's what was in the printer, PLA or PETG should also work well. They are very secure, even just using…

Bombardier CRJ-900 Kit Card

The Bombardier CRJ-900 is a regional jet airliner designed and manufactured by Bombardier Aerospace in Canada. It is part of the CRJ Series, which is widely used for short to medium-haul flights. The CRJ-900 can typically carry around 76…

Subaru Sambar - Road Flare Mount

My Sambar's mount was broken so with some measurements and a photo reference, I was able to create this model. It snugly fits the flare my truck came with. No support material should be needed for a properly tuned machine.

Vince Lombardi Trophy Football Holder (SHORTER VERSION)

I really like the original version of this football holder but it didn't fit on my printbed. If I just scale it down the football would not hold securely anymore and I don't like the look of split-apart-and-glued-together-again-models so…

Bombardier Badge

My version of the Bombardier Badge issued by the US Army Air Force from 1918 to 1948. I made some small changes, notably the circle in the middle is larger so I could add some lettering (the lettering is not included in the uploaded…

The Bombard: Vortex Bong v3

Baumbart from Lord of the Rings

created with meshy from an image

Gerber Armbar Holster

Here is a quick and dirty holster for the Gerber Armbar. While I love the pocket clip on this tool, I find it's often too strong for my pockets and constantly gets hung up, not to mention my pockets always being full. If there is any…

Subaru Sambar coin holder blank

This is a blank as well as one with holes for buttons. It fits in the location of the stock coin holder.

Bombardier Beetle Statue

Hello everyone, This is my design for a Bombardier Beetle statue. A high-precision model!! I hope you like it. If you have any questions, please feel free to ask. Happy printing!

Polybar Strumbar Remix

The Polybar is a great little controller for clone hero but the stock strum bar is way too big to allow for faster strumming and/or sweeping. This is remix is a down and dirty 5 minute fix in TinkerCad where I shortened the height by a…

Bombardino Crocodillo BRAINROT

Hi! I’d like to present my new—and the second in this series—wall decoration project for the little ones, featuring a character from the game BRAINROT . After creating a series of Brawl Stars characters that absolutely delighted my…

Bombardier Traxter Front cargo cover latch

I couldn't find any replacement rubber latches for my Bombardier Traxter so I made a set of these out of Sunlu 95A TPU. These stretch just enough to work on my machine using that TPU. I made some wavy bits to allow a little better…

Gerber Armbar Drive Tweezer and Needle

To install guide the shim with the tweezers (SAK, Swiss Army Knife, 45.5mm size) and close the knife. After the tweezers and can slide in part way and then the needle (must be small diameter). The bottle opener locks it all together. This…

Guimbardette ( Router-plane)

Un modèle de petite guimbarde parfaitement opérationnel, le fer est réalisé avec un clé six-pans de 6 mm, plus de renseignements dans la vidéo https://youtu.be/MOU88GhOGi0