409 models
Famous Planes Famous Planes is a set of airplanes in kit cards you have to build. Those are perfect gifts ! You can find the whole collection here 😊 ! F14 Tomcat This is another plane for your collection : the F14 Tomcat. This kit is…
Print approx. €1.39–€1.70 excl. taxPreliminary estimate for one variant
Easy to 3D print security cover for enhanced privacy with your handy Logitech StreamCam C980. No glue, just click the cover into the frame hinge and mount it on the camera. Easy to open, easy to stay close. Printed in cca 30–40 minutes…
Print approx. €0.45–€0.55 excl. taxPreliminary estimate for one variant
Adapter for attaching a DC plug to the Dreamcast power supply port, e.g. for use with picoPSU. I designed this from scratch in Fusion 360, but it's based on collingall's work. My main goal was to create a model that prints well without…
Print approx. €0.15–€0.18 excl. taxPreliminary estimate for PETGSource material: PET
My car needed new Rim caps. The ones I ordered from Amazon were too big, so I printed my own. They are better, shinier and have the latest VW Logo on them. Let's see how they hold up to the weather. It's a very tight fit! I printed it…
Print approx. €0.73–€0.89 excl. taxPreliminary estimate for one variant
A credit card sized kit card of the venerable F14 Tomcat I made for a friend. Everything should fit neatly. I tested on a Mini.
The Grumman F-14D Super Tomcat is the third and final variant of the F-14. The Tomcat is a supersonic, two-seat, Variable-Geometry Wing Fighter jet. Variable-Geometry Wings, more commonly known as swing wings, means the aircrafts wings…
F-14 Tomcat model with swept wings. The F-14 is known for its ability to sweep its wings. This gives it advantages in low and high speed flight, which it achieves by the angle of its wings.The F-14 Tomcat gained its fame in 1986 when it…
If you enjoy my work, you can support me with a small contribution ☕ It really helps me keep creating and bringing everyone’s ideas to life: https://buymeacoffee.com/teo_211
To save more space, I designed this vertical stand for the Dreamcast. While ideally suited for DCs that are equipped with optical disc emulators, it will also work with ones that still have their gdrom installed. I recommend printing this…
These are the LOOP style case panels for BeamCase sandwich and BeamCase SFF. Instead of multiple panels that are printed in a flat orientation, these are loops that are printed standing up, and come with two different vent patterns, slots…
These are the parts that are required to mount a Noctua NF-A4x10 5v inside of your Dreamcast. This mod only works in models VA1 and VA2 systems. There are two versions of the latch, the regular one is designed for the original Sega system…
These are case panels v3.2 to cover up your BeamCase and give it a unique look. The handles make it easy to carry and also act as feet and bumpers, though alternative case feet are avaliable. These are only the files for the outer panels,…
F-14 Tomcat US Navy Fighter Jet (Made Horizontal For Less Support And Smooth Print)
The Sega Dreamcast is a great console with a controller that had some odd design choices made for it. The most confusing is the controller cable that exits the back of the controller and then attaches to a clip built into the bottom of…
A much-improved version of my original VMU cap replacement that's about 95% accurate to the official Sega cap. I meticulously measured every little detail to make sure it fits perfectly, and it does! Visually it's not a 1:1 copy but it…
This nut positioner keeps flat square nuts (DIN 562) in their position, so they do not slide around in the Makerbeam XL profile. When adding brackets and other parts to your BeamCase, (or other projects using Makerbeam XL profiles)…
Flip cover forLogitech StreamCam. The shaft between the cover and the cap uses a 1.75 piece of filament Print instructions Flip cover forLogitech StreamCam. The shaft between the cover and the cap uses a 1.75 piece of filament
A two piece lens cover for the Logitech StreamCam. Use any bit of filament, 1.75 mm, as a pin for the hinge. Can be printed without support
I wouldn't trust this in anything but PC or nylon or something along those lines. I printed this out of PC. The stemcap was tested and held over 11Nm of torque which is more than should ever be applied. I've tested it on a few mountain…
v2 is now available with better, more printable hinges! If your printer cooling or overhang performance is average, please print with .1mm or .15mm layers Dreamcatchers are Native American charms that originated in the Ojibwe culture,…
A Dreamcatcher using single extrusions of filament as strings to create the web. Print at 0.2mm layer height.
Streamcam holder for tripod with joint. You need a threaded insert M3 (Ruthex) and a screw M3x18. The hole below is a core hole for 1/4 inch tripod thread. If necessary, I also have a lower part for the Ikea "Antifoni" lamp. Dismantle the…
Notice - make sure to use Arachne wall generator or enable printing thin walls setting in your slicer, as some elements of the model hang on very thin lines. Check out other Christmas models:
A surprisingly big plane; it was the biggest plane on board until our world cruise when we had an EA-3 Whale ( Skywarrior ) that had a sign on the side "on loan from the Smithsonian". again, no load out or missiles. I understand that…
A custom-designed enclosure for megavolt85's USB4MAPLE USB adapter for the Sega Dreamcast. You can find more info here . This build uses a Raspberry Pi RP2040 Zero and the controller connector from an extension cable. I used this…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, please consider buying me a coffee , and check out my other models ! ********** Thanks to @PhabulousPhantom's kit cards, my son and I are having fun making…
The Legendary F-14 A large carrier-based fighter that replaced the F-4 in handling fleet defense. Its striking twin engines and variable-sweep wings, along with its appearance in movies, has made it well known even outside of aircraft…
This Model is only the body! It is designed to be used with the ModCaster Guitar Neck. Files and build instructions for components of the ModCaster System are available on my Printables Page! At this time, some parts from…
The F-14 is a two-seater twin-jet with variable geometry: it can “fold” its wings around pivots located in the apices connecting to the fuselage. It thus adapts its aerodynamic profile to conditions of transonic and supersonic speeds…
This is my attempt to marry Xiaomi Mi Computer Monitor Light Bar and Logitech Streamcam . I'm pleased with both products, but I was so mad that there was no solution to use them together without any stupid workarounds. When I started…
Wall mountable Sega Dreamcast controller holder. This is designed for Picture Hanging Command Strips (ex: https://www.amazon.com/Command-Picture-Hanging-Christmas-Decorations/dp/B0B4F5PXW1 ) This probably could have been split into…
The Sega Dreamcast VMU has a battery life problem. It eats CR2032s for breakfast. Changing the batteries involves using a screw driver. It's a hassle to maintain. Features This project adds a battery pack to the VMU that allows you to…
This bracket is designed to add radiators and fans on top or below your BeamCase in a strong and good looking way. It is available in 50 different versions depending on your setup. These brackets are designed to work together with the…
These are braces to stiffen the frame of your BeamCase frame, or any other frame utilizing 15x15mm aluminium profiles (and m3 screws). The X-braces are made to stiffen your BeamCase frame. They are designed to work with Makerbeam XL…
Moon and rose dreamcatcher wallart
For Bluecurve, Helix, and Xfinity modems. Follow-up to my XB6 mount: https://www.printables.com/model/174485-arris-xb6-xfinity-wall-mount
This is a cable holder and zip tie point for the BeamCase system or other 15x15mm profiles using m3 nuts. With it you can secure cables in place and it helps cable management. These brackets are designed to work together with the modular…
This fan bracket is made to add fans to your BeamCase. It comes in different sizes for 120mm, 140mm and 92mm fans of different thicknesses. The bracket is secured to the fan with standard fan screws and then screwed to the frame from the…
These are corner braces to stiffen the frame of your BeamCase frame, or any other frame utilizing 15x15mm aluminium profiles (and m3 screws). The corner braces are made to stiffen aluminium frames and fit all BeamCase versions (SFF and…
If you like the design, please consider tipping on Ko-fi . Thank you! :-)
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Remix of the Logitech Streamcam Tripod Mount with Joint by Neoz3d Rebuilt from scratch in Autodesk Fusion 360 based on Neoz3d's design. Model is fully 3D printed. Replaced the need for an M3 nut and bolt with a printed thread and nuts…
A dwarf priest raising a hammer toward the sky, lightning bolts carved around the base. One-piece 3D print model. Model was tested in Orca Slicer for printability. Just scale it up to reach the desired size.
This fan bracket is made to add fans to your BeamCase (SFF). It comes in different sizes depending on the fan thickness and mounting position. The bracket is secured to the fan with standard fan screws and then it simply screwed to nuts…
F-14 Tomcat Display Control Panel
The F-14 is a two-seater twin-jet with variable geometry: it can “fold” its wings around pivots located in the apices connecting to the fuselage. It thus adapts its aerodynamic profile to conditions of transonic and supersonic speeds…
This is a 1:2 scale replica of Samus' Arm cannon from the Metroid Prime games. The cannon is made up of several parts to emulate the way it morphs and shifts when selecting different beams. The light is an RGB LED lamp I gutted and…
A stand for displaying your Dreamcast VMUs. The VMU snaps into place by utilizing the wrist strap connector at the bottom of the unit so it won't move around or accidently fall over. The triangle emblem piece can be printed separately so…
Remade the FlashlightBottomCap since the file is not there for this. I am making this for Christmas, so I needed it :)
I had the pins on the right Trigger broken off, and made a small model to fix this issue. Was printed on a Resin printer, and glued into place. This allows the tabs themselves to still flex a little bit, so you can insert it from the top…
Simple design for a wall mount for the Xfinity/Comcast XB7-T router. Fusion360 files included. Print in PETG. Supports for the screw holes.
Please note the Screenshot: This is a remix made from Printable Blueprints Collection by Basement Creations https://www.printables.com/model/459633-printable-blueprints-collection
This is replacement for plastic nut ( SOAP-NUT-GR ) of a kitchen soap dispenser ( SOAP-JAD-CPB ). The original part cracked and it is hard to buy the part outside of Poland. Printed part is probably compatible also with other McALPINE…
Box to safely hold Tomcat Bait Chunx mouse poison bait. Designed similar to the Tomcat brand boxes to prevent larger animals and pets from getting the poison. The mouse is able to get into the box, eat the bait, and leave. I printed in…
This is a plate for mounting the Terraonion MODE to a Sega Dreamcast. It uses the three existing disc drive screws to mount the plate to the Dreamcast. Four additional screws are needed to attach the MODE itself to the mount. The MODE…
SUPERSHELLS: Each supershell holds 12 darts and ejects for fast swaps mid-battle. Store 4 on the Nerf Rebel Ops Doom Cannon for instant access when you need to reload and re-engage. IMPORTANT — PLEASE READ BEFORE PRINTING Recommended…
This is a bracket to mount a 16mm button to your BeamCase frame (or other 15x15mm aluminium profiles) These brackets are designed to work together with the modular BeamCase ITX case which can be found here . Required Hardware Screws:…
This fan bracket is made to add fans to your BeamCase. It comes in different sizes for 120mm and 140mm fans. The bracket is secured to the fan with standard fan screws and then it slots into the frame on one side and is screwed to the…
This remix has an obvious and a few less apparent design changes. The most obvious change is that i opened up most of the cover area by removing the top an bottom layers and thus revealing the infill. (I needed to do some geometry…
- The one ring that should have been them all- Design Goal Designed a ring for the Prusa Printers flash contest. My goal was to make something nerdy yet simple/elegant, at which I think I succeeded! Printing & size The inner diameter (ID)…
Gdemu 5.20 mounting bracket for VA0 Mainboard
Print Settings Printer Brand: Creality Printer: Ender 3 V2 Rafts: No Supports: No Infill: 10-20%
This is an Dreamcast USB-C PD mount. You'll need an pico PSU from e.g. RexusNexus in addition to that an USB-C PD trigger.
These are angled external handles that fit all BeamCase variants that use the simple chamfered case panels (the default ones). These handles are very sturdy, and also act as bumpers for the case to protect it. There are two versions of…
"The ultimate Cat" and the finest carrierborn fighter ever created. Beautiful F-14 Design by http://logic-wizard.art.coocan.jp/fms_e.htm https://en.wikipedia.org/wiki/Grumman_F-14_Tomcat Print Settings Printer Brand: Creality Printer:…
Simple and fast print of a Dreamcast case emblem that makes it more 3D. I used a 0.25mm nozzle for my print to get cleaner text. Category: Video Games
Logitech StreamCam Lens Cover with an in-place hinge. It can be folded back completely. I printed with a layer height of 0.1mm and the hinge works perfectly
A 3D printable witch raising both arms, with jagged lightning bolts carved as thick arcs that anchor into the base. The lightning should be stylized, not thin, to ensure strong printing. Model was tested in Orca Slicer for printability.…
This simple bracket allows you to lock your VMU into the Dreamcast controller and make it extremely difficult to remove. Useful for Kiosk applications or trade shows and conventions. Only works with original Dreamcast controllers and…
Description These foldable legs give your BeamCase plenty of breathing room when in use, but can be folded up for transport. Extended they give 40mm of breathing room, and when folded they only add 11 in height. They fit all BeamCase…
Inspired by Tom DeLonge from blink 182 and my own personal style preferences, this guitar body is a custom design that I made based on the outline of a Fender Starcaster. I made this in to a real working guitar! I cut this model in to 7…
Logitech StreamCam GoPro Mount Snap in place. Tight fit. Not for bike mounts or similar ^^' The lens cover in the pictures is this one: https://www.printables.com/de/model/283582-logitech-streamcam-lens-cover
Logitech streamcam support - 3d print One for the universal Nut (1/4"). Other for direct attach to the cheap tripod.
These are the slide in fan brackets for the BeamCase system. These brackets slide into the aluminium profiles and instead of being screwed to nuts in the profiles which makes them simpler than the other options, but they need to be added…
These are longer panels for BeamCase Sandwich V3.0 with 15x15 Aluminium profiles that are between 300mm and 360mm long. The panels come with and without integrated handle, as well as version that are split along the length or one piece…
Ladies and gentlemen, I present to you the Sega Dreamcast VMU battery cover! Painstakingly re-created from scratch down to (almost) every minute detail! From the pointless little circles to the battery tab slot to the ever-so-slight angle…
EN - Description Wall decoration inspired by the F-14 Tomcat fighter jet. The model is designed as a flat decorative element. It is optimized for 3D printing without the use of supports. The multicolor design is achieved by changing the…
These are HDD brackets designed for BeamCase SFF case allowing to mount 5 HDD, perfect for a NAS build. Miscellaneous: 16 * M3x8 countersunk screws 8 * M3 nut 8 * M3 square nut 20 * HDD screws and rubber grommets I used this kind from…
Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: 0.16 Infill: 10-20% Filament: AddNorth PLA
This is a snap down retention bracket for hard drives and SSDs in MODE. Normally a SATA drive is secured down to MODE with 2 screws through the bottom. However that means you need to remove MODE from the console to get to the bottom of…
🌌🦉🦔🦋 Dreamcatcher Collection - Capture Dreams in Style! Key Features: 🪞 Base Plate Design: Each dreamcatcher features a beautifully crafted base plate that serves as the foundation for capturing dreams. 🌟 Ornamental Themes: Space: Embark…
This handle for the BeamCase system can be mounted anywhere along the Makerbeam XL profiles or between them. They can also be utilized as feet. This handle can be used with a bare frame, or with outer panels, there are two separate…
Thanks to @gristleking_151808 for providing the Step files for his Enclosure for the “MakerFabs V3 LoRa sensor” i was able to quickly adapt it to the b-parasite sensor which is similar in design and function, mostly reduced the height and…
3D printed spacer to be used with the Robot_Retro Dreamcast power supply. robot_retro store Designed by Joseph Tomkins
Logitech Streamcam bipod Use the original streamcam laptop mount as a desktop bipod ^^ Pass the mount through the shirt and slide the legs. Cam can tilt and pan, as if it was a neck. No screws, no magnet, slide in place.
A simple loose-fitting privacy cover for the Logitech StreamCam webcam. Print settings Material: PETG Layer height: 0.20 mm No supports needed. Seam position: Rear Perimeters: 2 Layer override: 3 perimeters on the topmost layer so no…
Dreamcatcher ornament @3DPrintBunny
Make sure you have a thin non-regular mainbaord.
These are additional case panel sizes for BeamCase SFF and (m)ATX v5.5. The files include panels that are printed as one piece and ones that are split along the length, in a range of size options. Components structure and naming: Each…
Slide onto the camera from above. With Logo or without All parts have been drawn by myself. Similarities to other parts by other designers are not intentional and or coincidental. Maybe I was inspired by other designs. If this happened, I…
Dreamcatcher body shaped like a spider web. It may be used in other ways too. Diameter is 150mm but you can scale it up or down in slicer to fit you needs.
I found this awesome design by Plastic_Innovations and made a few tweaks. I shrunk it a bit to better fit the Yeti 32oz cup. Its not a snug fit which allows room for something slightly bigger. I installed this in my 2016 gemcar and…
I saw a double feed practice round while looking for a snap cap model and really liked the concept but the execution just wasn't there so I made my own. These will fit in-between standard rounds or other snap caps but not consecutively. I…
F-14 Tomcat TACAN Control Panel
This bracket is made to add radiators to your BeamCase (SFF). It comes in different sizes depending on the radiator and fan thickness and mounting position. The bracket is secured to the radiator with standard screws and then it simply…
A Z-axis mount for the Logitech SteamCam to attach it to the Ender 3 S1 or Ender 3 S1 Pro. You can use the screw from GreatOldOne . https://www.thingiverse.com/thing:3160367/files Update: The camera occasionally made contact with the…
I recreated some classic (JDM-)wheels. They're approximately 1:3 scale and have an diameter of around 13.5cm and a width of around 9cm. They're not a perfect copy as I drew them just after some pictures from the internet. Print them as…
This bracket is made to add radiators to your BeamCase, there are versions for BeamCase SFF, m(ATX) and Sandwich. It is a simple bracket, that offers a lot of flexibility as the radiator can be moved up or down and forward and back. It…
Master Generator Control Panel
![#0033 [Remix] F-14D Super Tomcat Kit Card (no sprue)](https://media.printables.com/media/prints/266764/images/3300445_b2e2cdd8-6014-43a9-a0ec-5c6ffa4f28d1/rl-20230210-020.jpg)
