52 models
Do you have some new, fancy dual-color or tri-color filament to play with? Are you wondering which angle to best rotate your model before printing? This Multi-Color Filament Configuration Disk or “MCFCD” will help you determine the angles…
Huge thank you to Printables user soozafone for creating Lucky 13 . You will need the Lucky 13 armature and skin found HERE ASSEMBLY: Doc's belt fits onto Doc's waist and then the tool belt fits into the waist, see picture for proper…
Just flattening one side of the connecting pin and a simple addition of a few wedges to radius_mcfly's remix to eliminate the need for supports when printing. Printed on my AnkerMake M5 without support or brim. I did need to clean up the…
You may have to scale up or down 0.5% to get a good peg fit depending on your printer calibration. Printed in PLA 0.2mm layer height 6 top/bottom layers means no infill simple 12 minute 4.5g filament print
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Mobicool FR40 grit. Total dimensions 437mm*237mm*6mm. I printed it in 2.5mm layer height and it took around 6 hours for each part. Make your own grit: Also added the Fusion360 file to let you create your own sized grit. Just change the…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Das gesamte Modell besteht aus sechs einzelnen Teilen, die am ende zu einer großen Platte verklebt werden. Mobicool Bodengitter 1 wird hier insgesamt 4x benötigt, 2x so wie die stl. ist und 2x in einer Achse gespiegelt damit sich die…
I was looking for a way to have my Starlink Dish mounted on a fence post at my property and could not find anything suitable so I created my V1 Dishy Fence Post Mount for the Gen 1 version. NOW, thanks to the unwanted attention of some…
If you want to support my work, just buy me a coffee: paypal.me/predypavlovic All you need is a 4mm diameter rod. Filament: TPU Infill: 100% Happy hunting :-)
This is a remix of the lovely build by alpo16000 . Everything except the TPU ring is printed with PETG, 0.2mm layer height and 20% infill. "McFly_House" requires support for the front sight opening and rod. "McFly_Banner" and "McFly_M"…
Mr. Rogers' Neighborhood - Fred McFeely Rogers - 1968-2001 3D printable model.
“I guess you guys aren't ready for that, yet. But your kids are gonna love it.” I Used Elegoo PLA and PLA+ from my old printer and Bambu Matte Scarlet Red but you can use different. Print at 100% infill with a layer height of 0.08mm with…
Just a Quick model to test my failing computer. Remixed from parts from my 2nd ed dracolich and mindflayer. Last model made on my old cpu. I was quite charmed by Boney McFingies which appears in the Animated Spellbook video on Animate…
💖 Support Me If you like this model and want to use it for commercial purposes, you can support me on Patreon and get a commercial license: https://www.patreon.com/cw/MonsieurPierre 3D model inspired by Marty McFly from Back to the Future…
First attempt on modeling Marty McFly from Back to the Future 3. Image to stl, no manual rendering
3 walls 30% infill, colouring in red white and blue as seen in picture.
Luftkanal zur Geräuschdämmung und Ansaugung in Bodennähe. Wird einfach in die Löcher gesteckt. Ggf. Pattafix zur fixierung nutzen. Ggf. Filz oder Schaumstoff einkleben. Gedruckt aus ABS, kopfüber, mit Support
A fallout style minigun scaled for the 7" McFarlane Maximus figure and others. My Maximus came with just a hammer, the super deluxe one has lots of weapons but the paint job is poor - sadly you can't buy the weapons seperately so thought…
decided to make a Cleetus McFarland/motion raceworks edition valve cover for Ericthepoolboy's awesome 1/3 scale LS3 Category: 3D Printing
Some folks don't like walking in fresh snow, this snowman does with ear pods in his ears, listening to tunes on his phone with his dog “Powder” in tow. And Powder has left a present on the snow! Please read and follow the easy…
Step into the world of time travel with this incredibly detailed 3D printable figurine that brings cinematic magic to your desk! This expertly crafted STL model captures every iconic detail from the puffy vest to the classic sneakers,…
Flame effect for 89' Batmobile from Mcfarlane Toys
Assembly suggestions: Soften the adapter plate with a heat gun if fitment to grinder chassis is poor Print with PETG or similar at 100% infill V6 Update: Redone from scratch based on new measurements Model comes in two friction-fit parts;…
Толеранс 0,1 Размер 80х80х40мм
With this tunnel adapter, the air flow can be directed from the fan directly to the outlet. I also removed the original
I'm tired of McDonalds employees lying to me about their McFlurry machine being broken.
made to fit a McDonald ice cream cup
Experience the thrill of time travel with this incredible 3D printable STL figurine capturing the iconic hoverboard scene! This detailed statue showcases Marty in his classic 80s outfit, perfectly balanced on his futuristic hoverboard…
To make your computer fancier than your enemies and friends. I haven’t printed it so that has to be left to your better judgement, however I am quite sure a standard 20% infill should work, for the top hat a lower infill like 5 or 8%…
This is not your average woodland creature—this fox is 100% sass, 0% wilderness survival skills. With a look that says "I totally meant to do that," Foxy McFloof is here to supervise your desk, silently judge your snack choices, and…
This is a wall mount I designed to hold the McFadden Machine Lightnin' Grip speedLoader. I wanted to have it mounted next to my 22lr mags that are hanging on the wall also.
This is Floaty McFloatFace. To learn more about the project head to http://www.sparxcoreprojects.co.uk IN experimenting with LoRa i wanted to create a floating buoy that would send back over LoRaWAN sensor information like, water, air,…
dishwasher funnel, .stl for edit(SolidWorks).WIP.
This is the basic shape of a McFarlane Tool 132 ,WRENCH, Push Pull Control. Requested by a Reddit user .
Craftsman CMCF820 Impact Drill Tool Printed in PETG with a 0.2mm layer height and 5% infill Printed on Kingroon KP3s+
Garfield Marty McFly Ring Figure is a 3d printable character figurine mashup that combines garfield with marty mcfly style ring details for a standout collectible. Print it for desk display, shelf decor, tabletop mini scenes, or as a…
Here is Marty McFly from BTTF, scaled up to 200% of the famous brick brand's size. I designed all the parts myself using FreeCAD . Some are a bit loose, but the overall build is very sturdy. You can print it in PLA. I included a pause…
Here is Doc Brown from BTTF, scaled up to 200% of the famous brick brand's size. I designed all the parts myself using FreeCAD . Some are a bit loose, but the overall build is very sturdy. You can print it in PLA. I included a pause…
A fallout style minigun scaled for the 7" McFarlane Maximus figure and others. My Maximus came with just a hammer, the super deluxe one has lots of weapons but the paint job is poor - sadly you can't buy the weapons seperately so thought…
Huge thank you to Printables user soozafone for creating Lucky 13 . You will need the Lucky 13 armature and skin found HERE ASSEMBLY: Doc's belt fits onto Doc's waist and then the tool belt fits into the waist, see picture for proper…
Back to the Future - Marty McFly (Michael J. Fox) - 1985 3D printable model.
Back to the Future - Marty McFly (Michael J. Fox) - 1985 3D printable model.
Back to the Future - George McFly (Crispin Glover) - 1985 3D printable model.
Back to the Future - George McFly (Crispin Glover) - 1985 3D printable model.
Back to the Future - Lorraine Baines-McFly (Lea Thompson) - 1985 3D printable model.
Back to the Future - Lorraine Baines-McFly (Lea Thompson) - 1985 3D printable model.
Mobicool FR40 grit. Total dimensions 437mm*237mm*6mm. I printed it in 2.5mm layer height and it took around 6 hours for each part. Make your own grit: Also added the Fusion360 file to let you create your own sized grit. Just change the…
Multimaterial files are not multipart files, you can't assemble them after printing, they need to be printed with the multimaterial machine like mmu2, AMS, Palette etc…
After many cycles of use, the rubber feet for my Rolair air compressor (which is awesome) decided to take a poop - this is my replacement for said foot…feet…cap..etc. you get the drift. It fits a 1" (25.4mm ) tube so have at it if it fits…
