Counting matching models…
I always struggled with drilling the holes for wall mounts and pictures. With this handy tool, you can measure the distance between the holes of the thing you want to mount and can lock it in place with the knob. To achieve the perfect…
Pour Mesurer La Quantité De Spaghetti Avec 4 trous de mesure(mesure jusqu'à quatre portions pour adulte). Réduisez le gaspillage alimentaire.
Use with Ikea Skadis system and T-Clips to mount (see remix section). Fits larger tape measurers (the one I have is 25 feet). Should fit smaller ones just fine but they will have a lot of wiggle room. Be sure to print a T-Clip to go along…
This is a replacement “Drop Tube” for the RCBS powder hopper that came with my Rock Chucker Reloading Press, which I purchased in the late 90's. I haven't been able to locate this as a replacement part on the RCBS website, and this one…
You measure the pasta using the hole, the numbers are for how many (average!) people the pasta is for. 115g per person is considered a normal portion. OnShape Link:…
A remix of a remix in which I added some fillets to further strengthen the model and allow for easier placement of the tape. I also added a 3MF file which adds %100 infill on the “lip” on top of the model where the tape goes over to…
Love the lockable hole distance measurer but wanted a broader application and to use less material so created this version that fits a metal ruler (25.25mm wide by 1mm thick). Took ideas from two amazing creators (Niiskar and Lucian…
Based on Laurent Taz's spagetthi measurer I reworked the indented dots and put some (new) dots in, so a multicolor print (e.g. Mosaic, ERCF or MMU) is possible. Not much to say around it, but many thanks to the original author Laurent.…
What is it? Have you ever wanted to measure a nuts but didn't have the caliper? Well me always, that's why I decided to create this little keychain that would allow me to measure the nuts. I hope it's useful to everyone. With this…
This is remixed to include cutouts for holding the Dremel/Bosch Laser Measuring tool and its accessories. It is also adapted to have another hole for a small tether and utilizes 6x m3-20 screws.
This is just a pasta serving measurer that I thought would be a bit faster/simpler to use -- complete with a hanger so you can hang it right beside the spaghetti container for convenience. Hanger comes with either a standard 5mm peg or a…
Printed without supports 15% filling PLA
It is a rigid box as a case for the DTAPE DT50 laser measurer, it is a tool that travels a lot and is fragile, it is better than the cloth case that comes as a gift. The screws to use are: hinges 2.5x15 zipper 3x16 Impression: layer…
This is a holder keeping your STANLEY TLM40 Pocket Laser Distance Measurer / Rangefinder nicely on your Honeycomb Storage Wall (HSW) for easy retrieval. The device sits tight in the pocket - this is intended as I do not use it all too…
A spaghetti measure tool, with the option for monsters:) Made this with ABS white, Printed by https://www.mtb3d.com/
This is a pasta measurer I made for a Flying Spaghetti Monster (FSM) celebration that the Humanist Society of Greater Phoenix (https://hsgp.org/) puts on annually. Probably best to use PETG for this but PLA works too. The file…
Do you have problems cooking spaghettis? Every time you have to choose a fair portion per person you fail miserably? That's because you are not using the: FLIYING SPAGHETTI MONSTER PORTION MEASURER !!! You have two holes, a portion for…
This handy tool makes it easy to measure the correct amount of spagetti for 1,2 or 4 servings. If you like my designs please consider donating a coffee or any amount really, I appreciate the gesture.…
Magnetic case for the Dremel 3z Laser Measurer and accessories
Used to measure gaps. These are useful for measuring gaps in hard to reach places, but please consider the accuracy when using. The two files are identical except for the length. I colored some steps with a marker in the pictures to make…
Store all of your tape related things here! There's a spot for a tape measure and two half circles to hold tape or other circular things like an Oreo. Actually, fill up the tape measure bin with milk and dunk your Oreos, you could do that…
This little widget pops into your crank bolt (assuming it has an 8mm hex) and features a slot on the outside for your tape measure to bite into. It helps you get a highly precise measurement of seat height (in combination with something…
A game measurer/ruler for your game of Zone Wars. Print diagonally without skirt (see picture) and it should fit most hobbyist printers. Two versions supplied, one with a slot for your 32mm mini to measure from and one without it.
COFFEE MEASURING MEASURER TAMPER in 2 heights 135mm and 170mm, I needed a smaller height than those on sale, to use a sm
Hello everyone, here is an object that I imagined for a competition, it is quick to print and easy to use, plant it next to your plant and measure it, if it exceeds the 15 cm planned, you can leaving the object next to your vine is the…
Measures chamfer by putting it to the object
I loved ccbdav's idea for a wall target for putting on the edges of walls. I do flooring estimation, and often have to do very long laser shots. When I need to stop at a certain wall to make a corner I usually would have to do deductions…
I got the HOTO Laser Distance measurer and unfortunately it didn't come with any sort of protective casing for the device and lens. I whipped up this quick sock to fit over the device. I printed it on my Bambu Lab P1S with TPU 95A with a…
Internal dimensions: 60,8mm x 34,8 mm 3 walls. Layer height: 0,2mm Infill 15%
working on my lathe, I had a few times i blasted through the bottom, or had a way too thick bottom. I then 3dprinted this laser holder for my lathe. I measured a block in my chuck of the desired thickness and wrote that number down. Now…
Useful thing to drill holes in the plates or edges. Holes are 6mm with 10mm step starting from 10mm up to 100mm.
just added some magnet holes and provided the f3d file i made by converting the model;
This a simple case for the BM31 moisture measure instrument. I wanted to have one without buying any of the expensive ones. It fits the device perfectly. It's possible to add some small rubber pads to the inside so that it lays on a…
A device for measuring the length in cm of a path. The input wheel is marked in cm, the output wheel in tens of cm. Simply zero the device and then roll it along the path. A 1:50000 map is two cm per km. For axles I used some 1.75mm…
This box also has room for 2x AAA batteries.
I wanted to measure the diameter of a cable but at the time did not have a set of Vernier callipers This does a fair job of measuring a cable's (or other round thing's) diameter from 1mm to 9mm Each gap measuring a 2mm range eg from 3 to…
It can be tedious and time consuming to weigh espresso beans every time. Just measuring by volume is much faster. This ends up pretty close even when changing beans. Calibrated for the standard 18g for double espresso.
Wider version of tape measurer holder.
An AEG AEGLDM50 Laser Distance Measurer Gridfinity 1x3 holder on its side, measuring at 45.5mm tall for use in shallow drawers
For some reason Calibre don't publish the maximum dropper insert length anywhere, so I came up with this to take my own measurements. Its designed for a 30.9mm seat tube and a fairly standard machinists rule, but I've attached the…
Držák na laser BOSCH DLE 30 PLU.
COFFEE MEASURING MEASURER TAMPER height 135mm, I needed a smaller height than those on sale
It's @DavidSleep_340182's model but modified to fit 6x3mm magnets instead of 8x3s
Four holes for 1, 2, 3 and 4 servings of dry spaghetti, numbers engraved, with a hanging hole. Holes Ø21 / 29 / 35 / 40 mm About 80-90 g of spaghetti per serving 168 × 56 × 4 mm How it was checked Checked with an overhang audit of the…
My son likes to design creations for me to print, but sometimes needs some help with what his "measurements" actually mean. I created this visualizer to let him see some basic sizes in millimeters. This is version 1.0 of the model. The…
Hello, Sharing my project of 25cm long ruler. On the second side it has a tool to measure the hex nuts - from M3 to M8. Dimensions: 250x35x3mm 🚀 Want to sell prints of my models? Subscribe to my Patreon for only $10/month and get the…
This little widget pops into your crank bolt (assuming it has an 8mm hex) and features a slot on the outside for your tape measure to bite into. It helps you get a highly precise measurement of seat height (in combination with something…
![Lockable hole distance measurer with scale (20mm - 200mm) [v1.1]](https://media.printables.com/media/prints/644202/images/5085947_ae90008e-8660-4752-9160-1b9f4a3444cc_1ea70f13-8190-4920-bd57-67c307f5b7f8/dscf8816.jpg)
