Search results: meca

Sort order

276 models

P
PrintablesJames Takeya

Chromecast Remote Case

Filiament Type: TPU Rafts: No Supports: Yes Resolution: 0.4 nozzle, 0.2 layer height Infill: 100 Recommened Orientation button side down

Downloads
946
Likes
128
Rating
4.88
P
Printableszuberio

Easy Print Chromecast Remote Hard Case

A Fun and easy to print hard case remote for your Chromecast with Google TV. Designed for 0.2mm layer heights and prints with no supports. Does a great job preventing accidental volume changes!

Downloads
860
Likes
235
Rating
5
P
Printablesbykim

Google TV Chromecast Remote Wall Mount Caddy

Created a Google TV Chromecast Remote Wall Mount Caddy to be mounted to the back of our TV. Used command strips for mounting. Printed in PETG (incase the back of the TV gets hot) at 0.2mm layer height.

Downloads
726
Likes
74
Rating
4.8
P
PrintablesBOFH 1337
Downloads
624
Likes
97
Rating
4.83
P
PrintablesLiveFromNewYawk

Chromecast Remote Controller Battery Cover

Modeled this for someone who lost their remote backer. It's 98% as close as the stock one. Its difficult to print the small tabs closest to the middle of the remote, so better results might be achieved through a smaller nozzle or a resin…

Downloads
556
Likes
40
Rating
4.67
P
PrintablesBrad Barlow

Chromecast with GoogleTV remote holder / wall mount

Mount your Chromecast with GoogleTV remote on a wall or the side of some furniture with this minimalistic mount. The remote slides in snugly without any unnecessary friction. Designed with a flat back to be attached with some double sided…

Downloads
549
Likes
43
Rating
5
P
Printablesvsreality

Kinisi Mecanum Wheels Model 1 (150 mm 14 rollers)

Kinisi wheels is a pair of left and right mecanum wheels. Designed specially to be made on 3D printer with out any support structures. Diameter of the wheel: 150mm Number of rollers: 14 Bore diameter: 8mm One wheel constructs from 37…

Downloads
521
Likes
28
Rating
0
P
PrintablesPax 3D

goBILDA Mecanum Wheels

This is the goBILDA FTC Legal Mecanum Wheel. It's categorised as an omni-directional wheel, mainly used in robotics and industrial applications

Downloads
488
Likes
47
Rating
0
P
PrintablesRoger M

Google Chromecast 4 Holder

Simple holder for the gen 4 chromecast. If you don't want the chromcast to hang on only the HDMI and USB cable, this holder can be used with 2 sided tape. If you need to make changes the f3D file is inkluded.

Downloads
400
Likes
49
Rating
4.83
P
PrintablesSteven

Magnetic Nintendo Switch Super Mario Gamecard Box Question Block Mystery Block Storagebox

bill of materials: name info 4x 6x3mm Neodym magnets 4x M3x8mm SHCS steel Screw in to the Box. Super Glue For glue the magnets and the question mark.

Downloads
393
Likes
58
Rating
5
P
PrintablesPitta

Chromecast Google TV remote holder

A wall mounted remote holder for Google Chromecast with Google TV (Gen.4) 0.2 layer hight printed in PLA in 1 hour - no support needed

Downloads
391
Likes
38
Rating
5
P
PrintablesEvolv3D

Mecanum Wheel

The Mecanum wheel is a type of wheel that enables omnidirectional movement. It features a unique design with rollers positioned at a 45-degree angle around the circumference, allowing for lateral movement as well as forward and backward…

Downloads
389
Likes
104
Rating
5
P
PrintablesMcBig

BitBeam Mecanum Wheels

Two sizes of mecanum wheel for BitBeam construction kit. left and right cover are same, but be sure both of them have same direction (see arrow) i add wheels between covers, bb-wh-3 for bb-mecanum-7 and bb-wh-5 for mecanum-9 for each size…

Downloads
387
Likes
69
Rating
5
P
PrintablesTamirC

Chromecast remote control case / extender

Chromecast remote control case / extender

Downloads
357
Likes
39
Rating
4.67
P
PrintablesRpg3714v

SIMPLE KEYCAP - MECHANICAL KEYBOARD (TECLA DE TECLADO MECANICO)

Una tecla simple para teclados mecánicos. Debería andar sin problemas en cualquier tipo de switch ya sean blue, red, brown, etc. Es una copia exacta de las teclas de un teclado 75% T-TGK315. Cabe mencionar que al ser un modelo chico en…

Downloads
351
Likes
5
Rating
0
P

Chromecast Remote Case

The Chromecast Remote case! Features: Easy to clip in and clip out with the help of the service hole at the bottom Print it bright and colorful! Never lose your remote again!! Sleek design with a place to rest your index finger Easy…

Downloads
310
Likes
53
Rating
4
P
Printablesvsreality

Kinisi Mecanum Wheels Model 3 (100 mm 10 rollers)

Kinisi wheels are mecanum wheels for DIY projects, designed in mind to be easily made at home or in a small shop without any machinery or sophisticated tools. Wheels parts can be made on any 3D printer without any support material and…

Downloads
304
Likes
37
Rating
0
P
PrintablesAlex Just Alex

Otto Mecanum

Otto Mecanum I wanted to build a 4wd Otto with mecanum wheels. I also wanted to try out the Pi Pico W, although it would be fairly simple to use other boards. The Pico W lends itself to control over WiFi so that’s the control route I…

Downloads
290
Likes
53
Rating
0

Omnidirection Mecanum Wheel

These are omnidirectional mecanum wheels the fit 6inch hoverboard brushless hub motors. Here is a video of the assembly: https://youtu.be/QXF6hNVUydI I added three holes to use 0.125" roll pins to make assembly easier but they are not…

Downloads
288
Likes
47
Rating
0
P
PrintablesBrendonBuilds

XRP Chassis for Mecanum Wheels Robot

In addition to creating a CAD based .step file for others to expand upon this robot was designed to support existing XRP accessories/kits and has been optimized for easy printing. One impactful change is the improved channel around the…

Downloads
278
Likes
44
Rating
5
P
Printablesssenrah

Chromecast Remote Case

MARCH 2024 UPDATE After almost two years with the old file, I was getting really frustrated with the remote case and decided to re-design it from scratch. Even though the file looks nearly identical, it has several key changes: Improved…

Downloads
272
Likes
39
Rating
5
P
PrintablesJoe

Nintendo Switch Gamecard Jig

This is a work in progress RCM Jig for the game card slot. The jig does work pretty well but still needs some adjustment. Right now you need to fiddle a little bit to make it work consistently. I will add the Fusion source files once I…

Downloads
262
Likes
41
Rating
4.75
P
PrintablesSimo99

Mecanum Wheel

Mecanum wheels are omnidirectional wheels equipped with rollers angled at 45°, allowing a robot to move in any direction (forward, backward, sideways, diagonally, and rotate) without changing its orientation. When used in a 4-wheel…

Downloads
258
Likes
36
Rating
0
P
PrintablesEtno712

Touche / capuchon pour clavier mecanique

Notes pour l'impression Testé en impression PLA et résine. Nécessite un support pour la fixation en croix qui est légèrement en hauteur par rapport au bord de la touche. Notes de montage Quelque soit la matière utilisée, nécessitera de…

Downloads
256
Likes
11
Rating
5
P
Printablesqwerty

XRP Mecanum Drive / Omnidirectional (fully printed with 2 different frames)

This is a fully 3d printed mecanum drive for your XRP perfect for indoor and small spaces. For outdoor exploration I would recommend you some of my other mods like the xrp off-road mod , the xrp track system or if you wanna go to water…

Downloads
252
Likes
54
Rating
0
P
PrintablesCarlos Bennett

Chromecast Google TV Remote Case

I happen to sit on my Google TV remote all too often. The remote doesn't need to be see the TV at all to work. This leads to inadvertent pushing of buttons and interruptions in viewing time. With this REMIXED remote, buttons are protected…

Downloads
241
Likes
32
Rating
5
P
PrintablesAlex

FRC Intake Mecanum Wheel 1/2 in Hex

Remix based on: https://www.printables.com/model/118272-vectored-intake-wheels-for-frc Screw holes were modified to fit #10-32 screws and moved slightly to the side to accommodate larger nuts. The mecanum wheel is slightly larger than 2…

Downloads
220
Likes
11
Rating
0
P
Printablesketcham1009

Chromecast remote holder

Wall mountable remote holder for the Google TV Chromecast.

Downloads
211
Likes
28
Rating
5
P
PrintablesRedstoneGHGF

Chromecast Remote Holder

Simply put some double-sided adhesive tape under the Holder and stick it to a wall. Print time: 1:30h Costs: 10ct Print Settings: Printer: Ender 3Pro Rafts: No Supports: Yes Resolution: 0,16mm Infill: 20% Filament material: PLA

Downloads
208
Likes
16
Rating
5
P
PrintablesSpitzspot
Downloads
202
Likes
18
Rating
4.86
P
PrintablesTyler Harris

4in mecanum wheels, 1/2in hex axle

Print 2 of the side and 8 of the roller for one wheel. Mirror the side pieces for vectoring in the opposite direction.

Downloads
191
Likes
22
Rating
0
P
Printablesaidilfahmibakri

Chromecast with Google TV Remote Case + Apple AirTag

This is for anyone who wanted to attach their Apple AirTag to the Chromecast with Google TV Remote.

Downloads
183
Likes
23
Rating
4
P
PrintablesACP0n3

Chromecast w/ Google TV Remote sleeve and Tile sticker

This is a remix of torystark's model over on Thingiverse. https://www.thingiverse.com/thing:4825994/files Description The model is great on its own, but we needed a way to find the remote when it disappears in the living room. This uses a…

Downloads
182
Likes
28
Rating
5

Chromecast Remote Stand

Stand for the chromecast remote. Like my other model, which has an additional place for a hitachi beamer remote. There's also a small compartement for a pen or something similiar. There's a second modell with a slighlty bigger…

Downloads
180
Likes
23
Rating
5
P
PrintablesFred Good

ChromeCast with Google TV Remote Surround

Nothing special, except you may need to adjust your flow rates to make it a snap fit, both of worked well.

Downloads
177
Likes
31
Rating
4.67
P
PrintablesOnslope

Chromecast Remote Battery Cover

Update Ver 3 is updated 20250225 - Better fit Chromecast remote rear cover :) Print slow and fine for best result. Please comment the model :)

Downloads
172
Likes
19
Rating
0
P
PrintablesJürgen Weigert

Mecanum wheel flexible robot platform

This is my design of a Mecanum wheel (omni wheel) robot platform. While experimenting with a larger commercial bot, we found that a mecano wheel platform needs to have all four wheels always firmly on the ground. This design solves the…

Downloads
165
Likes
39
Rating
0
P
Printableslwr20

70mm Mecanum Wheel

We needed a 70mm mecanum wheel. This is a remix of a previous, larger mecanum wheel we used on Tigerbot in 2018 PiWars. https://www.thingiverse.com/thing:3127629 Original inspiration came from https://www.thingiverse.com/thing:1358552…

Downloads
163
Likes
14
Rating
0
P
Printablesthomaspsk

Tomecaster 3D Printed Modular Guitar v1

Intro Introducing the Tomecaster : Pronounced "Tome-caster" or “Tom-eh-caster” (because my name is “Tom” hehe…) A modern design made to work with widely available parts used to build T-style guitars like Telecasters as well as some rather…

Downloads
160
Likes
27
Rating
0
P
PrintablesMarv

Apple AirPort Extreme/Timecapsule Holder

This is just a simple wall mount for your beloved apple router. You can either mount it on two screw heads or for more security you can use M8 hanger bolts.

Downloads
159
Likes
14
Rating
0
P
PrintablesJAMF

Chromecast w/ Google TV wall / backside TV mount

A holder for a Chromecast with Google TV. To keep the stress from a dangling device on a HDMI cable Use double sided tape to attach it to the back of your TV Prusa PLA Might use some supports on the inner curve / overhang

Downloads
154
Likes
17
Rating
5
P
Printableslatriple C

MASJID AL-HARAM _ MECA

MASJID AL-HARAM _ MECA ..para un gran amigo Category: Scans & Replicas

Downloads
153
Likes
17
Rating
0
P
Printablesodannyc

Google TV (Chromecast) remote control clip with Apple AirTag holder

I printed this with 20% grid infill without support.

Downloads
150
Likes
10
Rating
5
P
Printablesneroes

chromecast remote holder - Honeycomb wall

v2 has 2mm shell as v1 had trouble printing due to overhang

Downloads
150
Likes
36
Rating
0
P
PrintablesPaddy S

Chromecast TV remote Banana Case

Tired of losing your Chromecast TV remote between the cushions? Well this is the STL for you!

Downloads
148
Likes
28
Rating
5

Mecanum Wheel

This is a small simple to print mecanum wheel. You may want to print the small wheels with flexible filament, else silicon or liquid rubber on the wheel also works to increase traction. you will also need 4 sets of 1/8 X 1 1/2 STOVE BOLTS…

Downloads
143
Likes
23
Rating
0
P
Printablesthenickdude

Air scoop for Mecaplex canopy window

This is a replacement air scoop which suits Mecaplex aircraft canopies (like the one on our club's Twin Astir and Hornet gliders). All three STLs can be printed with the same settings: Filament: Transparent PETG. Avoid PLA because it will…

Downloads
142
Likes
4
Rating
0
P
Printablesvsreality

Kinisi Mecanum Wheels Model 2 (100 mm 10 rollers)

Kinisi wheels are mecanum wheels for DIY projects, designed in mind to be easily made at home or in a small shop without any machinery or sophisticated tools. Wheels parts can be made on any 3D printer without any support material and…

Downloads
139
Likes
28
Rating
0
P
Printableschris neuman

Gridfinity Chromecast Remote

Replaced the base with a 1x1 gridfinity base so it can have a nice spot on my desk!

Downloads
136
Likes
32
Rating
5
P
PrintablesArt3mis

Meca Sim Racing Sequential Shifter

A 1 to 1 Model of the Meca Shifter. Ideal to figure out where to mount it on your Sim Rig.

Downloads
134
Likes
13
Rating
0
P
Printableszuberio

Chromecast with Google TV Remote Holder

Pretty self explanatory. no supports required 0.2mm layer height 0.4mm nozzle 20% infill PLA

Downloads
132
Likes
22
Rating
5
P
Printablesbeerman

Chromecast Remote case

Filled in the bottom, chamfered the bottom edge so it's a bit more ergonomic.

Downloads
131
Likes
13
Rating
5
P
PrintablesJo

W639 VITO window button mecanism. Driver side

Works like a charm since then. Pretty easy to print as well, just print the buttons upside down.

Downloads
119
Likes
11
Rating
0
P
PrintablesAlex Just Alex

Otto Mecanum: 48mm mecanum wheel servo adaptor

The print in place mecanum wheels were ok, but suffered from the use of PLA for the rollers, which really limited the surfaces that they functioned properly on. I did consider a new self assembly wheel with TPU rollers but discovered that…

Downloads
119
Likes
24
Rating
0
P
PrintablesWerner

Google Chromecast Remote Holder

Google Chromecast Remote Holder for Screw or double sided Tape

Downloads
119
Likes
11
Rating
4
P
PrintablesAdriano Alvarez

Chromecast Remote Holder

Chromecast remote control holder, wall mount

Downloads
117
Likes
12
Rating
0
P
Printablesstarwarsyeah

Google Chromecast TV Remote Push-Click mount with crossbeam

This is a remix of the Google Chromecast TV Remote Push-Click mount by Byteslinger. I added a crossbeam to the main holder because the arm mechanism would pop up and out of place under the stress of the springs. The crossbeam holds the…

Downloads
115
Likes
41
Rating
5
P
PrintablesFDMaker

MAGICAL Ramp with MECANICAL Start - Brachistochrone Curve

Compatible with all Marbles up to 17 mm in diameter Assembly Instructions 1) The Ramp Start Attach the “Start” to the “Ramp” using a piece of filament . Push the filament in firmly !! 2) The 3 Marbles Screw the 3 parts together to form a…

Downloads
113
Likes
57
Rating
5
P
PrintablesSh4g

Mecanismo de los ojos V3

Animatronic Eye Mechanism – Academic Reference Model Este modelo presenta el mecanismo completo de ojos y párpados utilizado en la cabeza animatrónica del proyecto “Jack”. Incluye las esferas oculares, soportes estructurales, palancas,…

Downloads
112
Likes
11
Rating
0
P
PrintablesSkint007

Google TV Chromecast Remote Holder - HSW

V2 - Oct/23/23 - Removed the other holes and hex protrusions. I liked the original control holder but didn't want to have to screw in the remote in place. So, I added the HSW insert on the back. I'm not very good with editing STLs so it…

Downloads
112
Likes
9
Rating
5
P
Printablesimpalaengineer

ZX-Spectrum 48k Harlequin : case + mecanical keyboard

Complete computer design for the ZX-Spectrum Harlequin motherboard (keyboard, case). https://grabcad.com/library/zx-spectrum-harlequin-computer-1 Print Settings Printer Brand: Prusa Printer: i3 MK2S Rafts: Doesn't Matter Supports: Yes…

Downloads
112
Likes
11
Rating
0
P
PrintablesJulien Mairy

Meca TV Man

📺🤖 Meca TV Man – Fan Art Inspired by Skibidi Toilet Meet Meca TV Man , a fun fan art creation inspired by the crazy world of Skibidi Toilet's TV Men ! This retro-futuristic robot with a mecha-style body was specially made to make my son…

Downloads
108
Likes
10
Rating
0
P
Printablesalgotn

Chromecast TV Remote Case

Info This is a remix of Cool Junk s case It "fixes" so the button are less annoyingly hard to press (especially the power and source buttons) Since no source file was provided I did it using booleans in blender, so if you want to further…

Downloads
100
Likes
10
Rating
0
P
PrintablesMacNeill

Wall Mount for Chromecast-Audio

I designed this bracket because the Chromecast-Audio needed a fixed place near the stereo. The hole on the top has a 10mm diameter, so a standard audio plug should fit in. The plug for the power supply isn't covered by the bracket. One…

Downloads
97
Likes
16
Rating
5

Small Mecanum Wheel - 3/8 inch Hex bore for FRC

Ultra lightweight and some of the smallest mechanums available. Print in PETG.Ream all the roller shaft holes with an 1/8inch drill bit and hand drill. Ream the two screw holes with a 3mm bit. Ream all the roller holes with a 3.5mm bit.…

Downloads
96
Likes
15
Rating
0
P
PrintablesPrintmalox

Box for Google Chromecast with Google TV

Box to organize the Chromecast including the cable, charger, remote controll and 2 AAA batteries. It can be closed with a slidable cover. Pictures a V1, V1.1 has some updates for better usability. Box um das Chromecast sowie das Kabel,…

Downloads
96
Likes
7
Rating
0
P
Printablesja nmm

Kappe Grimeca Felge Vespa

Abdeckkappe Grimeca Felge

Downloads
95
Likes
5
Rating
0
P
PrintablesJillian Morgan

Mecanum Wheel

A from-scratch design of a mecanum wheel (https://en.wikipedia.org/wiki/Mecanum_wheel), intentionally scaled and designed to mimic the size and shape of a typical filament spool. Printed parts: All parts: 0.2mm layer height, 8 top layers,…

Downloads
94
Likes
19
Rating
0
P
PrintablesChudy90

HY300 Projector Wall Mount Adjustable Chromecast

This is wall mount for HY300 projector that enables mounting of additional cables behind it. theres also additional slot for chromecast dongle. If you are not able to set the correct angle on the projector there is also option to print…

Downloads
93
Likes
7
Rating
0
P
PrintablesPhilip

TPU Roller for Mecanum wheel

This is a TPU version of a roller for a 3d printable design on thingiverse. It has a PETG Roller Insert as well.

Downloads
87
Likes
15
Rating
0
P
PrintablesCallum James

Custom Keychain/Namecard/Tag

Very Simple keychain identifier for, Backdoor, Front door, Side door, House, Shed, Garage, Blank & Numbers 1-10 for multiple keys. All made by myself, I paused the print at the end of layer 15 to change Colour of filament for the Text.…

Downloads
86
Likes
1
Rating
0
P
PrintablesMike Designer

LLAVERO MECATRONICA

LLAVERO DE DISEÑO DE LA INGENIERIA MECATRONICA. IDEAL PARA LAS LLAVES Y ALGUN ESTUDIANTE DE INGENIERIA MECATRONICA MATERIAL PLA, VELOCIDAD 30 MM/S, CAMA 50° , TEMPERATURA DE IMPRESION 210°C DENSIDAD 35%, PERIMETROS 3.

Downloads
85
Likes
8
Rating
0
P
Printablesalphablau

Zahnstange mecanical toy

Ein Zahnstangen-Model zum lernen oder Spaß haben.

Downloads
83
Likes
6
Rating
0
P
PrintablesCallmelee

3D Printed Mecanum Wheels Robot

This a mecanum wheels robot that you can control it with your smartphone via the HC-05 Bluetooth model. It's easy to make and follow if you want to make it yourself.

Downloads
79
Likes
19
Rating
0
P
PrintablesMe

Chromecast Remote Housing for Google TV Streamer (4K)

Remote case for the Google TV Streamer 4K As with the original model, after printing add a dab of hot glue to the bottom center, and a dot on the side. Before the hot glue cools, put your remote in to mold the hot glue against it. This…

Downloads
78
Likes
11
Rating
0
P
Printablesphilipf

Chromecast with Google TV Wall Mount

I am using this remote holder to mount it to a wooden cupboard. Print settings No supports, print in an upright position PLA 30% infill 2 walls

Downloads
78
Likes
9
Rating
0
P
PrintablesNickNothom

Remote for Chromecast with Google TV

I created this model while making a holder for the Google TV Remote. The dimensions are accurate but the curvature on the bottom of the remote doesn't exactly match the real version. I simplified by using circular profile, the real remote…

Downloads
77
Likes
6
Rating
0
P
PrintablesKazR

Google Chromecast Audio wall mount

Simple wall mount for the Chromecast Audio with a single mounting screw hole. Comes in two parts: the lid twists onto the base. Printed in PLA, 20% Infill and no supports.

Downloads
77
Likes
10
Rating
5

Christmas namecard

Jednoduchá jmenovka na Vánoční dárek, kde v prusasliceru jednoduše stačí doplnit jméno, případné přání "Veselé Vánoce" či PF. Pro zrychlení tisku ale i přijemný vzhled tisku vyhovuje i tryska 0.3mm. Jednoduchý pro výtisk z PLA, ale použil…

Downloads
77
Likes
8
Rating
0
P
PrintablesPeatch

Mecanum Wheel 64mm V1

Only the body part needs support. Mirror the parts for the other orientation. I printed the tires out of TPU.

Downloads
77
Likes
7
Rating
0
P
PrintablesAlex Just Alex

Long wheelbase and mecanum wheel adaptor for HP Otto

Sets of 48mm mecanum wheels can be found on amazon, ebay and aliexpress I printed 0.2mm 20%infil PLA The wheel adaptor may be improved by printing with support for the servo horn recess. You may prefer to trim the servo horns to fit the…

Downloads
77
Likes
14
Rating
5
P
PrintablesArt3mis

Meca Sim Racing Handbrake

A 1 to 1 Model of the Meca Handbrake. Ideal to figure out where to mount it on your Sim Rig.

Downloads
76
Likes
7
Rating
0
P
PrintablesIvyMike

Shortened "d1 gear and axle" for Antikythera Mecanism

This remix provides a shorter version of the “d1 gear and axle” that is part of the “Orange D-Axis and C-axis” folder for the Antikythera mechanism. When I assembled my clock, I found that the d1 axle stuck out the back of the D2 gear and…

Downloads
76
Likes
9
Rating
0
P
PrintablesPetr Stoklasa

Chromecast držák

Klasicky kam s ním…..tedy s dálkovým ovladačem. Toto je držák k přišroubování, případně přilepení třeba na nohu konferenčního stolku. Lze použít také suchý zip, nebo oboustranku.

Downloads
75
Likes
19
Rating
5
P
PrintablesDionarap

Mecanum Car

Work in Progress! but prototype is printed and works! Mecanum car with independent suspended wheels and a motor for every wheel. 4x Planetary gearboxes to reduce the motor RPM take the project files with a grain of salt! I recomend to…

Downloads
74
Likes
27
Rating
0

Chromecast and Beamer Remote Stand

Stand for the chromecast remote and also for the remote of an old Hitachi Beamer. There's also a small compartement for a pen or something similiar. My Print Instructions/Settings 0.25mm Draft Setting for PrusaMINI in PrusaSlicer (But…

Downloads
73
Likes
10
Rating
0
P
PrintablesNickbaxter

Roof for Victure Gamecam

Roof for game camera, clips into frame of camera. Design for Victure game camera. Designed to prevent morning dew from collecting on the camera. Print instructions ASA is best material for outdoors. I've only tested with PETG. 7 Perimeters

Downloads
72
Likes
19
Rating
0
P
PrintablesDigiKey

XRP Mecanum Frame

Looking to expand the functionality of the XRP robotics kit? Looking to learn how to program a robot to use mecanum wheels? Check out the guide for this build on our Maker.io site located here: Enhancing XRP Functionality with a Mecanum…

Downloads
71
Likes
17
Rating
0

Animated Mecanical Christmas Tree

This is not a simple Christmas Tree ! It's magical ! When you turn the wheel, all the garland and star will turn in différent way. Mount it from bottom to top and finish with the bow the solidarise everything. Don't screw to hard the last…

Downloads
65
Likes
11
Rating
0
P
PrintablesBrendonBuilds

XRP Chassis for Mini Mecanum Wheels Robot

A lightweight, mini Mecanum Wheels robot that is small enough that it can be printed on nearly every 3D printer. All of the parts snap into place and no tools are required for assembly. Recommended Print Settings 1.2mm vertical shell…

Downloads
64
Likes
11
Rating
0
P
PrintablesLiveFromNewYawk

Chromecast Remote Controller Wall Mount

All I did was add a countersunk hole so that it can be mounted to a wall. Since the back is slightly recessed if you tighten the screw too much it will pinch the remote and make it hard to slide in and out, so back the screw out just a…

Downloads
63
Likes
8
Rating
5
P
PrintablesDan Royer

procedural mecanum wheel

generates one half of a mecanum wheel and one roller. Should be able to print without support, untested. play with the parameters and enjoy! default wheel uses M3 screws and nuts, 10cm diameter, 2cm thickness. for slightly looser screws…

Downloads
63
Likes
8
Rating
0
P
Printablesalex4fake

75mm Mecanum Wheel for OSOYOO car

Print orientation : flat. Supports : Internal side may need supports for the shaft chamber based on your slicer (e.g. Cura needs supports as it will print walls on the thin air). Right front wheel can be made by mirroring the left front…

Downloads
63
Likes
14
Rating
0
P
Printablesjonashedlof

Schneider / telemecanique Harmony XB5 22mm wrench tool

V6 2024-03-25 New design with a outer ring for better performance V5 2024-03-xx First release

Downloads
61
Likes
5
Rating
0
P
PrintablesSM Prints

Chromecast Remote Adapter for Cocoon Stand

I really liked the look of this remote holder model but unfortunately my Chromecast remote didn't fit. It was too short. so I designed a small adapter that can be glued into the first slot.

Downloads
60
Likes
22
Rating
5