P
PrintablesDomi
Jägermeister
Mit Gewinde zum direkten aufschrauben auf die Flasche
- Downloads
- 433
- Likes
- 44
- Rating
- 4.67
Search results: meister
Counting matching models…
P
PrintablesAlex Ghita
Jagermeister Logo - for Jager Tap Machine 1BTM220
Designed a logo for for the Jagermeister 1 bottle Tap Machine top cover Size of the model: 195x44x2, but it can be scaled to your needs Printed with filament change at 1mm, 0.2 layer, 0.4mm nozzle ok MK3S in about 1h. Can be printed with…
- Downloads
- 270
- Likes
- 35
- Rating
- 5
P
PrintablesKrystofWink
Jagermeister alcohol funnel
This stylized funnel provides good control of the flowing liquid. I was inspired by similar funnel in Germany. This model is a remix. I recommend supports only for antlers and bottom of the mouth, the inside of the model does not need any…
- Downloads
- 740
- Likes
- 128
- Rating
- 5
P
Printables3D Tom
Jägermeister Sixpack
Jägermeister Sixpack für 0,02l Fläschchen Logos zum einkleben ausziehbarer Griff - wie beim großen Biermodell (2 optionale Längen)) Drucktipps: sollten aufgrund der dünnen Wände des Modells lücken in den Logoausnehmungen der Kiste…
- Downloads
- 689
- Likes
- 82
- Rating
- 4.8
P
PrintablesMishiro Studio
Master Ball | Meisterball | Fanart | Pokemon
Check our my MakerWorld for more free models: https://makerworld.com/en/@mishirostudio Master Ball – 3D Printable Model Catch any Pokémon in style with this Master Ball-inspired model ! Designed with realistic proportions (75mm diameter)…
- Downloads
- 500
- Likes
- 81
- Rating
- 4.5
P
PrintablesAE52
Work Meister S1 AE52 Wheels
I designed this JDM classic. The rims should be as close as possible to the original but still look good 3D-printed. The Meister S1 are a 3 piece design. You can mount the rim as a sandwich mount or rear load exposed version. I have added…
- Downloads
- 471
- Likes
- 65
- Rating
- 5
P
PrintablesFekete Áron
Deutsche Meisterschaft Meisterschale (german championship champion's bowl)
The original bowl is 590 mm in diameter, so I uploaded a smaller version, and one cutted into pieces too. If you printed it out don't forget to upload a make. If you need some changes (f.e.: different colors differnet pieces) then don't…
- Downloads
- 447
- Likes
- 12
- Rating
- 0
P
Printablesices
Gridfinity Meistergriff Deburring Tool
🇬🇧 Gridfinitiy holder for the Meistergriff deburring tool set 🇩🇪 Gridfinitiy Halter für das Meistergriff Entgrater Set https://amazon.de/gp/product/B093PQXJCS/
- Downloads
- 407
- Likes
- 72
- Rating
- 4.87
P
PrintablesRevenger
Jägermeister Shotglas / Schnapsglas
Ein großes Shot Glas im Jägermeister Design. kein Support notwendig Infill: empfehlung 100% Kleiner Reminder: Denkt daran lebensmittelechtes Filament zu verwenden und die Düse vorher zu reinigen. und nun frohes Drucken und Prost!
- Downloads
- 363
- Likes
- 27
- Rating
- 0
P
PrintablesClarasLittleArtworks
Meister Eders Werkstatt H0 - Pumuckl
Designed Meister Eders Werkstatt from Pumuckl in H0 size (M 1:87), perfect for modelrailway. Inside is a hole, so you can add some light. I printed it with Resin Printer and painted it. I added some tiny detail too. I think for Filament…
- Downloads
- 354
- Likes
- 48
- Rating
- 5
P
PrintablesChrisEg
Deburring Toolbox for Meistergriff
I modified the case for the following tool: https://www.amazon.de/MEISTERGRIFF-Entgrater-inkl-11-Klingen/dp/B093PQXJCS/
- Downloads
- 280
- Likes
- 49
- Rating
- 4.77
P
PrintablesHardwareLab
Jagermeister shoot glass rugged box
In order to join box/lid/latch together I used M3 pins but you can also use M3 bolts (RVS recommended) All the letters are glued directly to the lid. In order to achieve hexagonal pattern on the “shotglass plate” print it withiout top and…
- Downloads
- 262
- Likes
- 97
- Rating
- 5
P
PrintablesMark
Flitsmeister 2 houder voor Tesla model 3/Y
Flitsmeister 2 houder voor Tesla model 3/Y
- Downloads
- 192
- Likes
- 10
- Rating
- 0
P
Printablessvnhnvr
Jägermeister Adapter für Pumpe auf 1.75L / 3.0L
Here's a Bottle Adapter for 1.75L / 3.0L Jägermeister Bottles (Other big Bottles like Jim Beam or Jack Daniel's will also work) to use with the electric Pump, wich only comes with the 0.7L Bottles. (Important: The metal thing around the…
- Downloads
- 182
- Likes
- 14
- Rating
- 5
P
PrintablesJeyMco
Flitsmeister 2 Holder
The company still makes the device but no longer the holder, so I modelled this using a remix from thingyverse to replace a broken one. Works just as well as the original. (The design keeps being a bit flimsy due to the thin pins required…
- Downloads
- 160
- Likes
- 1
- Rating
- 0
P
Printableswolffshaut
Catan "Großmeister" Pokal
A trophy for a big Catan competition a friend of mine arrange every Year. this is a remix of 2 thingiverse things: thing:4177016 and thing:3320274
- Downloads
- 150
- Likes
- 18
- Rating
- 4
P
PrintablesHomerlars
Clothes horse clothes airers Wäscheständer Meisterhome Gelenk
Wir haben zwei Meisterhome Wäscheständer beide sind durchs umkippen am Gelenk kaputt gegangen daher hier das Ersatzteil. Für die andere Seite im Slicer Spiegeln. We have two Meisterhome clothes airers, both of which broke at the joint…
- Downloads
- 142
- Likes
- 18
- Rating
- 0
P
PrintablesShoshke
Firmer Pulling rod for Pull Copter by Meister Edel
The origins felt a bit flimsy in PETG and broke after only a few uses. this one is very similar but the handle will take a bit more of a beating This handle is a remix for:…
- Downloads
- 135
- Likes
- 8
- Rating
- 0
P
PrintablesFlitsmeister
Flitsmeister DASH Mount
Personaliseer je DASH ervaring met de Flitsmeister DASH-houder! Ons 3D-model is ontworpen om je volledige vrijheid te geven in hoe je je DASH monteert. De houder bestaat uit twee geprinte onderdelen die met vijf magneten aan elkaar…
- Downloads
- 128
- Likes
- 1
- Rating
- 0
P
Printablesder-pw
Emergency Jaegermeister in a manual call point
The Jägermeister emergency bottle in a manual call point. In case of an "acute fire/thirst incident", simply break the glass and be happy. :-D You still need: 1 bottle 4cl Jägermeister 1 bottle of model building / superglue Hot glue gun 5…
- Downloads
- 116
- Likes
- 36
- Rating
- 4.5
P
PrintablesNils 3d druck
Figur von Meister-Yoda
Figur von Meister-Yoda Category: Art
- Downloads
- 91
- Likes
- 9
- Rating
- 0
P
Printablesfabi
Adapter für Asbach Flasche auf eine Jägermeistermaschine
Adapter damit man eine Asbach Flasche auf eine Jägermeistermaschine stecken kann. Man braucht zusätzlich Dichtungsringe. Wichtig ist das Material muss Lebensmittelecht sein.(PETG)
- Downloads
- 80
- Likes
- 2
- Rating
- 0
P
Printablesmarc
Pegboard mount Wolfcraft Meisterdübler
Remixed using https://www.thingiverse.com/thing:3800185 https://www.thingiverse.com/thing:1520678
- Downloads
- 64
- Likes
- 17
- Rating
- 5
P
PrintablesMax Grasserbauer
Jägermeister 6er Kiste
Kleben Sie den Henkel einfach mit Superkleber an die dafür vorgesehene Stelle an.
- Downloads
- 61
- Likes
- 6
- Rating
- 0
P
PrintablesLogan
Hausmeister " Superman "
Türschild Grundfarbe bis 2,20mm beibehalten, dann den ersten Farbwechsel bei 2,20mm zweiter Wechsel bei 3,20mm dritte Farbewechsel bei 4,20mm vornehmen Viel Spaß
- Downloads
- 57
- Likes
- 1
- Rating
- 0
P
PrintablesHaggiwatt
- Downloads
- 57
- Likes
- 8
- Rating
- 0
P
PrintablesAlCheMaker3D
Erweiterung 2 - Händler und Baumeister - Box für Carcassonne
Auf dem Deckel ist das Symbol und der Titel eingeprägt, sodass durch einen Farbwechsel auf Höhe 0,5mm das Symbol farbig hinterlegt werden kann. Die zweite Variante kann mithilfe der MMU farbig ausgedruckt werden. Im Boden der Dose ist die…
- Downloads
- 52
- Likes
- 6
- Rating
- 0
P
PrintablesMartina
Deburring Toolbox for Meistergriff - Mirrored
This box fits the deburring tool from Meistergriff: https://www.amazon.de/MEISTERGRIFF-Entgrater-inkl-11-Klingen/dp/B093PQXJCS/ Printer: Prusa MK4 Filament: Bottom in Prusament PETG Galaxy Black, Top in Prusament PETG Mango Yellow
- Downloads
- 52
- Likes
- 11
- Rating
- 5
P
PrintablesBitBender
Meisterspool: A multi-part masterspool
Ever wanted to print a masterspool, but your build plate is too small? Let me introduce you to the Meisterspool - a full-size masterspool design that is assembled from six parts, which makes it printable on the Prusa Mini's 18x18 build…
- Downloads
- 42
- Likes
- 11
- Rating
- 5
P
PrintablesAlCheMaker3D
Erweiterung 5 - Abtei und Bürgermeister - Box für Carcassonne
Auf dem Deckel ist das Symbol und der Titel eingeprägt, sodass durch einen Farbwechsel auf Höhe 0,5mm das Symbol farbig hinterlegt werden kann. Die zweite Variante kann mithilfe der MMU farbig ausgedruckt werden. Im Boden der Dose ist die…
- Downloads
- 41
- Likes
- 6
- Rating
- 5
P
PrintablesEdgar
Halterung Meistergriff Entgrater
Halterung für den Entgrater Meistergriff am IKEA Skadis System. Es gib schon einige aber die halten den Entgrater alle senkrecht. Deshalb neigt sich bei dieser Halterung der Entgrater leicht nach vorne. So kann er besser entnommen und…
- Downloads
- 38
- Likes
- 5
- Rating
- 0
P
PrintablesPetr Šimon
Bob the builder - Bob der Baumeister
Simply Bob, just a little different.
- Downloads
- 37
- Likes
- 9
- Rating
- 5
P
PrintablesFinisz
IKEA Skadis side Jagermeister shot glass holder
As base for hangers i used this model https://www.thingiverse.com/thing:5362022
- Downloads
- 36
- Likes
- 11
- Rating
- 0
P
PrintablesSam
Makita LXT 18V Battery Adapter for Meister Craft MAS168
This adapter gives my old cordless screwdriver a new live ;-). The 16.8V battery pack was broken and I did not want to invest in NiMH adapter anymore. But as I use Makita LXT 18V system, I bought a cheap adapter at…
- Downloads
- 35
- Likes
- 10
- Rating
- 0
P
PrintablesGlenn
Flitsmeister TWO mount for MINI Countryman U25
A mount for the Flitsmeister Two, so its fits the MINI Countryman. It was hard to pick a propper location, everything is cloth or you would block the ambientlights or projection. Only the mount is my design. You still need the bracket…
- Downloads
- 34
- Likes
- 3
- Rating
- 0
P
PrintablesManu
Jägermeister Mini Bottle Display – Bar / Man Cave Decor
Bring some iconic bar vibes to your home! This 3D‑printed display stand is designed to hold two small 2cl Jägermeister bottles and showcase them in front of a clean, bold backwall featuring a forest silhouette and classic lettering.…
- Downloads
- 32
- Likes
- 9
- Rating
- 0
P
Printablesstevo
Break in case of an emergency Jagermeister 700ml
To print the text plate, you need to split the text plate stl in your slicer to parts or object and assign multicolor for the letters... Print settings: 0.2mm 12% infill 2 or 3 perimeters
- Downloads
- 32
- Likes
- 22
- Rating
- 0
P
PrintablesDominic Bölter
Zeichenschablone für Verfahrenstechnik, Chemikant bzw. Industriemeister Chemie
Eine Zeichenschablone für Grundlegende Symbole aus der Verfahrenstechnik für Chemikanten bzw. Industriemeister Chemie. Habe diese Schablone für mich und meine Kollegen zur Meisterprüfung erstellt, und diese hat mir persönlich gut…
- Downloads
- 30
- Likes
- 2
- Rating
- 0
P
PrintablesMateusz Rulski
Weltmeister (Diana) accordion register switch
I printed it from PETG, 0.16 layer height, 3 perimeters, concentric infill. The tall column (the spring post) needs time to cool between layers, so, to achieve optimal results, consider printing 2 or more pieces simultaneously. Print…
- Downloads
- 28
- Likes
- 3
- Rating
- 0
P
PrintablesE_gaming
Din Panel Labeling Meisterkurs Ulm
A rail mounted Panel holder to stick various danger Labelings on it, and covering the screws of the conectors. Hutschienenadapter Für Warnhinweise über Klemmsteine und zur beschriftung der Phasenfolge sowie Berührungsschutz
- Downloads
- 27
- Likes
- 2
- Rating
- 0
P
PrintablesDave
Grill Meister thermometer holder
It's printed in one piece. You need two screws to pin it to a wall/cabinet. I used: PETG 0.4mm nozzle 0.3mm layer
- Downloads
- 24
- Likes
- 1
- Rating
- 0
P
PrintablesVitrah X Adrian
Skirting Board End Cap / Fußleiste Endkappe (Meister 20 PK)
These end caps are designed for Meister 20 PK or 16mm wide and 60mm high skirting boards. You should print them upside down. The end caps are best attached to the skirting boards using 12mm wide double-sided tape.
- Downloads
- 21
- Likes
- 3
- Rating
- 0
P
PrintablesLukas Binnenböse
Deburring toolbox for meistergriff looser
Wider cut-out for the Meistergriff deburring tool (amazon.de ASIN: B093PQXJCS) Printed on a GEEETECH Mizar S, with white GEEETECH PLA @210°C and 50°C bed temp with a 0.6 mm nozzle, scaled it to 101% to fit no support needed
- Downloads
- 20
- Likes
- 1
- Rating
- 0
P
PrintablesMaxel
Notfall Jägermeister Flaschenaufsatz für kleine Jäger-Fläschle
Ich habe hier für einen Freund zum Geburtstag eine Art des “Notfall Jägis" geschaffen. Der Deckel passt auf die kleinen Jägermeister - Flaschen. Ich habe eine 0,1 L flasche genommen. Es sitzt stramm auf dem Deckel drauf, es passt einfach.…
- Downloads
- 18
- Likes
- 0
- Rating
- 0
P
Printablesdeeptoast
Fixierung für Bohrhilfe (CREATE - Bohrmeister)
Die Leiste hat zwei Laschen an denen Schraubzwingen verwendet werden können, sowie zwei Löcher für Senkkopfschrauben mit maximal 4 mm Gewinde. Der ‘Bohrmeister’ sitzt straff in der Leiste.
- Downloads
- 17
- Likes
- 3
- Rating
- 0
P
Printableshuba
Jagermeister cup coaster
This is a Jägermeister-inspired 3D printed coaster , featuring a bold deer logo with a detailed cutout design. The two-color print creates a strong contrast, making the iconic symbol stand out while also providing a functional surface for…
- Downloads
- 16
- Likes
- 3
- Rating
- 0
P
PrintablesTrappinger
Table soccer "Deutscher Meister"
Table soccer figure/Kickerfigur passend für "Deutscher Meister"
- Downloads
- 14
- Likes
- 1
- Rating
- 0
P
PrintablesT.G
Emergency jaegermeister
Made for 100ml jaegermeister bottle. (more pictures comming soon)
- Downloads
- 14
- Likes
- 2
- Rating
- 0
P
PrintablesBucuCZ
Putzmeister remote control saver
Bigger leg for putzmeister remote control to improve its durability. All you have to do is snap or stick it.
- Downloads
- 14
- Likes
- 0
- Rating
- 0
P
PrintablesC64emu
![[IKEA SKADIS] Kabelmeister power strip mounting plate](https://media.printables.com/media/prints/2cb38d8e-f83c-4ed4-8e34-59da0a0dd8bc/images/9377031_ad898720-f872-4330-a878-9d3bde7bd61b_496c6532-4d06-4432-8bdf-0671ed5ca479/01-phase03-montage_der_steckdose_06.png)
[IKEA SKADIS] Kabelmeister power strip mounting plate
This is a mounting plate for a power strip from Kabelmeister. I wanted a power strip with 3 outlets and some USB ports for my bathrom. In other rooms I use KOPPLA power strips for this purpose. But in an environment of a bath room with…
- Downloads
- 13
- Likes
- 4
- Rating
- 0
P
PrintablesMark_S996
Hausmeister HM 2054 head clip
It's a replacement clip for Hausmeister HM 2054 vacuum cleaner's head.
- Downloads
- 9
- Likes
- 0
- Rating
- 0
P
PrintablesRed_printer_3D_Sdtio
Label for emergency Jaegermeister German
Label for emergency Jaegermeister German Beschriftung oben und unten für das entsprechende Modell auf Deutsch
- Downloads
- 8
- Likes
- 1
- Rating
- 0
P
PrintablesMatas_9
1. Fc Koeln Meister Schild
Schild mit der Aufschrift „1. FC Köln – 2. Bundesliga Meister 2025“. Ideal als Deko für Fans, zur Erinnerung an die Meisterschaftssaison. Für den privaten Gebrauch – kein offizielles Vereinsprodukt.
- Downloads
- 7
- Likes
- 1
- Rating
- 0
P
PrintablesRobert Grubba
Bee hotel with hood - Meister Edel remix
Modified bee hotel in medium size: - I've added hood that prevents overheating of the hotel in full sun and saves the entrance from the rain - I've shortened distance from the entrance to the tubes I was not able print the hood without…
- Downloads
- 7
- Likes
- 7
- Rating
- 5
P
PrintablesJohannes
Sockel für Braumeister 20L
Braumeister Feet Fixation by Lillbobben - Thingiverse
- Downloads
- 7
- Likes
- 1
- Rating
- 0
P
Printablessam
Fußleisten Endkappen kompatibel mit Meister Steckfußleisten
Das Modell ist kompatibel mit Meister Steckfußleisten Höhe 50 mm Profil 8 PK / 18 PK.
- Downloads
- 6
- Likes
- 0
- Rating
- 0
P
Printablescv0x
Door Tool Hanger for Grillmeister Memphis 19.7kW / Věšák na nářadí pro Grillmeister Memphis 19.7kW
Door Tool Hanger for Grillmeister Memphis (4+1 Burners) This 3D-printable accessory is specifically designed for the Grillmeister Memphis 19.7 kW gas grill (commonly sold at Lidl). If you're tired of cluttering your side tables with tongs…
- Downloads
- 6
- Likes
- 0
- Rating
- 0
P
PrintablesEmanuel
System Reiner Cartridge Nozzle (for example for Fuchs Lagermeister BF2 cartridges)
Nozzle and Nozzle cap for System Reiner cartridges, which for example is used by the Fuchs Lagermeister BF2 cartridges, which is great for lubricating linear rails. The fit is not perfect but it screws on fully and seals well.
- Downloads
- 6
- Likes
- 1
- Rating
- 0
P
PrintablesDaniel Neumann
HABA Legespiel Logikbaumeister
Das verloren gegangene Teil vom HABA Legespiel "Logikbaumeister"
- Downloads
- 5
- Likes
- 0
- Rating
- 0
P
Printablestover
Gridfinity Ratschenringschlüssel toom (Meister)
Gridfinity-Inlay passend für das 6-teilige Ratschenringschlüssel-Set von toom (Marke: Meister). Das Modell basiert auf einem 1/2 Gridfinity-Modul, um maximale Flexibilität und Platzausnutzung im Werkstattwagen zu ermöglichen. link zum…
- Downloads
- 5
- Likes
- 1
- Rating
- 0
P
PrintablesRok Bukva
Thermometer holder for Grill Meister
The model is designed for Grill Meister Wireless Grill Thermometer GFGT 433 B2 (Lidl brand). It can be screwed and there is opening at the back so you can add metal plate to hold it in place by magnet.
- Downloads
- 4
- Likes
- 1
- Rating
- 0
P
Printablesrutomoda
Werkmeister Spring Pin Replacement
Sometimes the pins holding the springs together break due to wear and age. This model is designed to be an easily printable replacement. You will need to supply your own M2 x 12mm-ish long screw for each pin! ±2mm length should be fine.…
- Downloads
- 3
- Likes
- 0
- Rating
- 0
P
Printablesunruhestifter
TPU Jaw Pad for Meister 5136100 Bench Vise
Print on pad surface, use 95A (or any) TPU, I printed mine with 100% infill. Should just slip onto your vice and keep on by friction (close to the original)
- Downloads
- 1
- Likes
- 5
- Rating
- 0
P
PrintablesPhilipp
Insert for "Ja, Herr und Meister!" (Rigor Mortis)
Here is a simple and practical insert I designed for the card game Rigor Mortis: Ja, Herr und Meister! (German version of Aye, Dark Overlord! ) This organizer is designed to fit perfectly into the original box, keeping your cards neatly…
- Downloads
- 0
- Likes
- 0
- Rating
- 0
P
PrintablesLyra
Meister Makatsu (Dojo) Inlay
There is a little bit to play in the insert. I noticed after printing that this could be reduced, but since it did not cause an issue it remains like this for now. The SolidWorks file is there if some one wants to fix it. I guess it will…
- Downloads
- 0
- Likes
- 0
- Rating
- 0
P
Printables
Weltmeister (Diana) accordion register switch
I printed it from PETG, 0.16 layer height, 3 perimeters, concentric infill. The tall column (the spring post) needs time to cool between layers, so, to achieve optimal results, consider printing 2 or more pieces simultaneously. Print…
P
Printables
Jägermeister Holder For 6 Glasses
Info This is pretty and easy to print Jägermeister glasses holder for 6 glasses. It is for storing glasses in home, freezer or in car. If you find some problems please text me i will fix it. As always i uploud Fusion 360 projekt file so…
P
Printables
Jägermeister Mini Bottle Display – Bar / Man Cave Decor
Bring some iconic bar vibes to your home! This 3D‑printed display stand is designed to hold two small 2cl Jägermeister bottles and showcase them in front of a clean, bold backwall featuring a forest silhouette and classic lettering.…
P
Printables
Tesla Model 3/Y Flitsmeister One Holder
Flitsmeister One Screen Mount for Tesla Model 3 or Tesla Model Y. To increase strength print with 3walls. Printing in PETG for summer heat recommended. Mount on bottom of screen with some doublesided tape (3M VHB of similar).
P
Printables
Bee frame holder for Meisterbeute
Remix of the remix to fit my "Meisterbeute" system. Print two, mirroring the other.
P
Printables
Jägermeister Holder For 6 Glasses
Info This is pretty and easy to print Jägermeister glasses holder for 6 glasses. It is for storing glasses in home, freezer or in car. If you find some problems please text me i will fix it. As always i uploud Fusion 360 projekt file so…
P
Printables
DnD - Azshoran - Der Dunkle Magiermeister
Gedruckt in 0,12mm in HQ Schrägnaht aktiviert. Angepasste Schrägnaht. Druckbett 55 Grad SUNLU PLA+ Enjoy!
P
Printables
Flitsmeister DASH mount for MINI Countryman U25 (USB Charging optional)
To make this model you need: 2x 12mm M3 screws 5x 4x8mm Magnets For the version with built-in charger, you also need: 2x pogo pin 4.5mm height ( https://nl.aliexpress.com/item/1005010008913818.html ) 1x USB-C connector female (…
P
Printables
Flitsmeister TWO Vent Mount
A mount for the Flitsmeister TWO. This model fits the MINI F56. But it just a vent mount so might fit other cars as well. It must be printed on its side with supports. Assembly with 2 M3 screws.
P
Printables
Braumeister 20 Heating Coil Cleaner
Cut off a piece of sponge and cut a hole in the middle. Print Settings Printer Brand: Creality Printer: Ender 5 Rafts: No Supports: No Resolution: .2 Infill: 80% Filament: Sunlu PLA Green Category: Kitchen & Dining
P
Printables
Jägermeister Bottle Light Hanger
This is a simple design to hang an empty Jägermeister bottle filled with LEDs Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: Doesn't Matter Supports: No Resolution: 0.2 Infill: 15% Post-Printing Use either an elastic…
P
Printables
Hip flask Jagermeister
One day i was at school and we have class and i was bored so i decided to modeled some hip flash. I hope u like it.
P
Printables
Jägermeister Logo
Layer hight Recommended to print on 0.20mm setting for faster time, 0.08 for a nicer looking one. Infill Infill on the presliced one is 25% for stronger lines.Still works good with 20%. Dont recommend less than 15%and it could snap…
P
Printables
Trash Bin Lid Adapter Jägermeister
This is an adapter for the lid of a Jägermeister Ice Cube Box, which is being used as a trash can for organic waste. The problem was that the lid was only loosely resting on top of the bucket. With this adapter, the bucket can now be…
P
Printables
Rosina Wachtmeister sitting cat
This is a model of a sitting cat. This is a typical Rosina Wachtmeister style cat. The model looks best when paited. preferably in bright colors. Printed with ender 3 V2, 10% infill. Can use some support around the head.
P
Printables
Jägermeister Holder 100ml
Jägermeister Holder bottle 100ml. Designed in Poland using fuzion 360 software. For non-commercial use Print Settings Printer Brand: TEVO Printer: Tarantula Rafts: No Supports: No Resolution: 0.2 Infill: 20 Filament: Plast-Spaw PLA…
P
Printables
Jaegermeister Logo
A simple model of the Jägermeister logo. On request, the lid can be printed and glued on, making it easier to hang up the logo. I have attached LED strips to the back of my print and fed them through the existing hole, thanks to ESP8266 I…
P
Printables
Jägermeister
Jägermeister držák na frťany (zkumavky) jednoduchý na tisk, rychlé a funkční. Jägermeister holder for tubes (tubes) easy to print, fast and functional.
P
Printables
0.1l Jagermeister emergency box
0.1l Jagermeister emergency box. The model is inspired by a smaller version of the box: https://www.printables.com/pl/model/484392-emergency-jaegermeister-in-a-manual-call-point by der-pw. Enjoy!