Counting matching models…
For a small project I needed a narrow case for my ESP32. Of course I found appropriate templates - only I was not satisfied with them. Especially the fact that the lid had too much play and then you would have had to glue this. Therefore,…
Print approx. €0.67–€0.82 excl. taxPreliminary estimate for one variant
The Stela of Pasherienimhotep (W1041) is a beautiful limestone stela from ancient Egypt, currently housed in the Egypt Centre collection. It offers valuable insights into the life and career of a high-ranking priest during the Ptolemaic…
Print approx. €13.60–€16.63 excl. taxPreliminary estimate for one variant
This is a housing for: Wemos D1 Mini / ESP8266 ESP-12 0,96" OLED Display I2C SSD1306 CO2: Senseair S8 as well as MH-Z19 is fitting I've soldered a BMP280 and a SHT21 for temperature and humidity together Used DuPont cables Many…
Print approx. €1.53–€1.86 excl. taxPreliminary estimate for one variant
This is print is designed to mount a Netatmo Outdoor module and a generic 433MHz cheap temperature sensor on a pole. It also includes two “radiation shields” which protect the sensors from direct sunlight, but allow air to flow through…
Print approx. €3.01–€3.68 excl. taxPreliminary estimate for PETGSource material: PET
The Senosor became too hot on the first model despite the honeycomb on the lid. For this reason, I also had to design the outer wall with honeycomb. Now there is no heat problem in the housing and the sensor measures the content of CO2 in…
Print approx. €0.38–€0.47 excl. taxPreliminary estimate for PETGSource material: PET
I rebuilded the Latching Broom holder from Greg Frost ( https://www.thingiverse.com/thing:2029895 ) in Solid Works. So for everyone using Solidworks..here you go ! The screws i used are: DIN EN ISO 4762 - M3x20.. (thanks PsiborgJhin for…
Print approx. €2.66–€3.25 excl. taxPreliminary estimate for one variant
This hook is designed to fit the bathroomheater (eg. Badheizkörper Schulte München rund 1215x500 mm weiß mit Mittelanschluß) with a piperadius of 11mm (d=22mm) and a pipedistance of 42mm. The dimensoins of the hook are designed as 23mm…
Print approx. €0.48–€0.59 excl. taxPreliminary estimate for PETGSource material: PET
Mrs. Brisby : Meeting Great owl : Secret of Nimh
Print approx. €3.94–€4.82 excl. taxPreliminary estimate for one variant
Diese Absaugung wird anstatt Staubbeutel an dem Bandschleifer montiert. Anschluss für Staubsauger Kärcher, Rohrdurchmesser 35 mm. An manchen Stellen müssen noch Stützen platziert werden - bitte vor dem Druck prüfen.
Print approx. €5.06–€6.18 excl. taxPreliminary estimate for one variant
A simpel holder for leifheit mop with 25mm diameter Print with PLA and 15% infill, no supports needed
Print approx. €1.11–€1.36 excl. taxPreliminary estimate for one variant
2022 tombstone is made of multiple pieces: the cross, base, and gemstones. Use filament color changes on cross and base parts to make text and sun/moon icons prominent. Cross slides into base with a tight fit. Place base on table, line up…
Print approx. €0.13–€0.16 excl. taxPreliminary estimate for one variant
Unauffällige Reparatur von einem historischen Kronleuchter mit 4 M3 Gewindebohrungen.
Print approx. €0.48–€0.58 excl. taxPreliminary estimate for one variant
Signal Generator 35 MHz to 4.4GHz for RF.
Print approx. €0.60–€0.73 excl. taxPreliminary estimate for one variant
With most helmet mounts, the helmet only rests on a very small area (ball), which can damage the helmet padding in the long term. That's why I designed my own holder that solves this problem. You can also hang your jacket/pants and keys…
Egg holder-egg box-egg stand with changeable sign for MHD/BBD m With changeable compartment to insert small pieces of paper to write down the expiration date. Always fresh eggs, thanks to this dispenser, fill the dispenser with up to 10…
Less than 10 percent of people who download an item click the “like” button. Be the 10 percent. Click the “like” button and show your support. It means a lot, and us designers really appreciate it. Overlay tile replacement for the board…
use the fuzzy skin option to get a concrete look texture!
Premium versions of the models found here: landable and multi-color landable and Printables Store . This is an overlay tile replacement for the board game Gloomhaven. Tile Count: 3 Tile Type: Difficult Print Settings Supports: No…
Multi-material/Multi-color version pictured above available on my Gumroad Store Yet Another Wooden Crate. This is an overlay tile replacement for the board game Gloomhaven. Tile Count: 2 One version has a flat bottom for easier printing.…
A new organizer with little waste of material that actual fits everything. I really like the ideas behind some organizers that I saw at Thingy, but they use very thick walls and big filling blocks that add time and material in excess. So…
Multi-color/Multi-material and Flat-Top/Landable Treasure Chests available on my Gumroads Store and Printables Store . Overlay tile replacements for the board game Gloomhaven or any 28mm table top gaming. Tile Count: 6 Gold, 6 Silver Pick…
Table with chairs version is available on my Gumroads Store and on my Printables Club . This is a overlay tile replacement for the board game Gloomhaven. Table only model available here. Tile Count: 3 Print instructions Supports: No…
The MHP Vulture is a lever-action short dart spring-powered blaster remixed from MrHeathPants’ own Wrenfield MK-3 blaster design. Featuring a premium CNC-milled, black anodized aluminum lever and priming bars along with a unique…
This is the PERFECT Gloomhaven / Frosthaven / Jaws of the Lion standee! You can print this and rush to show it off to your wife, which will undoubtedly raise an eyebrow at your excitement, in complete disbelief at how great your next…
Landable 2 and 3 hex versions for sale on my Gumroad Store and Printables Store . Overlay tile replacement for the board game Gloomhaven. Finally, players and monsters can now land on every hex of these boulders. No more worrying about…
Prebuilt copies and kits in the future are available here: https://www.frontlinefoam.com/product/the-mhp-lmg/ A nerf dart blaster that uses flywheels and a metal TT gearbox to feed and fire darts from a disintegrating belt. Currently…
You can fly/land on me! Overlay tile replacement for the board game Gloomhaven. Tile Count: 6 Note: I made these a while ago and never published them. I didn't love the way the models looked when rendered in thingiverse. I finally printed…
This is an overlay tile replacement for the board game Gloomhaven. Tile Count: 4 Print instructions Supports: No Resolution: 0.10mm Infill: 15% Encouragement If you like what I'm doing or use this in your game consider buying me a coffee…
Multi-material/Multi-color version pictured above available on my Gumroad Store Yet another Wooden Barrel, this one has rope! This is an overlay tile replacement for the board game Gloomhaven. Tile Count: 3 One version has a flat bottom…
I remixed some playerdash boards for Gloomhaven found on thingiverse. For the supports I recommend to place custom a few lines and enable the bridge function in your slicers. (consult the pictures) Remixed from:…
Rock terrain for Gloomhaven board game. Tile Count: 6x (1 hex) Boulder 4x (2 hex) Large Boulders 4x (3 hex) Huge Boulders If you like what I'm doing consider buying me a coffee: Buy me a coffee Print instructions Supports: No
Rock Column terrain tile replacement for Gloomhaven board game. You can flip this on both sides for variation. Tile Count: 6x (1 hex) Rock Column Print instructions Encouragement: If you like what I'm doing consider buying me a coffee:…
!! You will find more for free / pay what you want in my ko-fi shop !! Ruined dungeon walls for the MagHex system for use in Gloomhaven and Frosthaven. Contains a 3x3 mm MagHex base. Prints well on .2 and even on .3 layer height.…
Another model from Monster Hunter: World All design and copyright belong to CAPCOM Category: Creatures
Ich habe hier einen Regenschirmhalter für VAG modele Konstruiert Dieser wird ganz einfach am Top Tether eingeklippst Gedruckt habe ich das ganze aus ASA mit 3 Wandlinien und 15% Füllung
All I did was add holes in the bottom of Robagon 's and liquidlogic 's pillars for 6x3 magnets to use them in Xevin 's MagHex Gloomhaven Tile System (links below) but other magnetic systems will work too. It was an easy and fast edit on…
This is yet another bookcase overlay tile replacement for the board game Gloomhaven. Tile Count: 4 Original non-commercial version here: https://www.thingiverse.com/thing:2758101 Print instructions Supports: No Resolution: 0.08mm Infill:…
Stalagmites tile overlay replacement for Gloomhaven board game. I was not having good luck printing other stalagmites when scaled to 28mm, so I made some that hopefully will work better. Tile Count: 6x (1 hex) Stalagmites Print…
You can easy print this out of any material. I got an enclosure so i went for PETG. I printed it with the side where the cam is mounted on, on the printplate. You need to replace the two screws! The originals are too short when using this…
Finally some prints of my own (12-08-23) I finally received my Prusa Mk4! I have the ability to rapid prototype a lot faster and have uploaded a new design with many small changes. The overall look hasn't changed but I'm getting good…
I made a quick remix of Robagon's excellent bush model because I wanted to have more points in the top layer so that models could stand on it more easily. So, I used the same tricks that I used when making the JotL Destruction tokens to…
This is my take on inserts for Gloomhaven: Jaws of the Lion Everything is stored in the box securely with the lid fully closing, but each tray can be taken out easily to decrease setup and take down time. The character decks are sleeved…
Tile overlay replacement for the board game Gloomhaven. Tile Count: 6 (you can always use some extra) Yet another Bear trap! This was just for fun. Note: Never stick your hand in a live bear trap! Print instructions Supports: No…
A friend of mine was missing a few parts (specifically the pool) for a Barbie Dreamhouse. Due to the difficulty in finding a reasonably priced replacement part, and the belief I could make a better looking one, I printed one out of…
Update May5 2022 Added the XP and HP pin (heart) stl files from DocKuro 's post just in case people cant find them. Also fixed errors in the Character Board stl and the gcode files. I use Duramic PLA+ Filaments and they print very well…
This is the Living Bones model that I've been working on for the board game, Gloomhaven. I'm still fine tuning the model, but I think that it's gotten to the point where it's printable and so I want to show off my hard work! Speaking of…
Flying monsters or summons can land on crystal version 2.0 and 2.5, available on my Gumroads Store and my Printables Club . Overlay tile replacement for the board game Gloomhaven. Tile Count: 2 Print Settings Supports: No Resolution:…
Warning: The following may contain game spoilers. Read at your own peril. If you want to print off the initiative tokens, Recommend printing off the monster labels twice so you don't have to keep removing them from the box. Update…
This is a Rubble overlay tile replacement for the boardgames Gloomhaven & Frosthaven. It has small flat section on top for easy monster landing and like my other models no supports needed. In-Game Info Tile Name: Rubble Gloomhaven Tile…
3003 Fantasy Bits Mega STL Collection on Kickstarter Here’s the updated version with the correct Patreon link: 🔥 Want to stand out in the 3D printing market and attract more customers? 🔥 Now’s your chance to sell unique, stylish, and…
Ground Plane Antenna 868MHz (or for other frequencies like 433MHz or 915MHz) for Meshtastic or anything else i used 1,5mm² (1,4mm diameter) copper wire to find in Europe in the standard NYM cable or AWG 14 or 15 in the US -stretch the…
Increased the length of the anti tipping brackets for better stability. This holds the attack deck for a gloomhaven monster, including the monster stat card. This is meant to be used together with thing 2810528 so that dice are no longer…
Another rip from Monster Hunter World, Diablos. FunFact: they eat cacti Category: Creatures
Doors! I've been working on this for a while, trying to come up with something that would keep a door in place nicely but would also leave room for all the models to stand in the door once removed. Same door fits both bottoms. Print door…
These boxes can be used to store everything that comes in the character envelope for a class (and, if you use the biggest one, even the character mini). This is a remix of jgrg1's character boxes on thingiverse . I've made a few changes,…
Overlay tile replacement for the board game Gloomhaven. Tile Count: 4 Print instructions Supports: No Resolution: 0.10mm Infill: 15% Encouragement If you like what I'm doing or use this in your game consider buying me a coffee or sending…
🌌 Wormhole Wall Art – A Journey Through Space and Dimensions! Create a stunning visual illusion with this futuristic 3D-printable wall art inspired by wormholes, gravity wells and the fascinating geometry of spacetime. The geometric…
IMPORTANT DISCLAIMER, READ THIS BEFORE MOVING ON!!! YOU must take all the precautions needed to print this rack in the sturdiest possible way, in order to prevent YOUR printed parts to fail and break after the weight of guns and ammos,…
Overlay tile replacement for the board game Gloomhaven. Two files are mirrors of each other for the two different colored tiles. Tile Count: 4 (4 yellow, 4 gray if you want to get technical) Print instructions Print Settings Supports:No…
I have been constantly getting lost when playing Gloomhaven so i decided to create a dashboard for players that would save some space on the table and help to organize your stuff. It lets you manage basicly everything you need during…
Remix for use with Meshtastic Requires SMA crimp connector, a piece of heat shrink tubing, and RG174 cable or similar diameter. Glue the connector with the crimped cable into the antenna using 5-minute epoxy or another glue .
Overlay tile replacement for Gloomhaven board game. Tile Count: 2 Different version of shelf non-remix so I could drop the non-commercial license. Got rid of the "cabbage" ;) Original non-commercial version here:…
I'm using this remix for the Hound (or Wolf) monster in Gloomhaven. I scaled it, made some slight sculpt modifications and posed it. Thanks to Agademer for making one of the cooler wolves on Thingiverse! Category: Toy & Game Accessories
Overlay tile for the board game Gloomhaven. The large version is more like a full size wardrobe. The small version is probably closer to the correct size. Since obstacles do not block line of sight in the game I assumed they where below…
UPDATE: recommend this sliced version instead: https://www.thingiverse.com/thing:3936411 Another rip from Monster Hunter: World Fun Fact: Feed him with any kind of meat to make him glow (and berserk, see render) Contains few overlaps from…
My wife and I are getting ready to start Jaws of the Lion, but I realized that the first scenario (and a few thereafter) has a cool set of palisades that I had no overlay for... so I made one! I quickly flipped through the scenario book…
The edges are beveled so it isn't harsh on your cards. It is designed to fit cards with or without card sleeves.
I really enjoyed assembling the blaster from mh319, but there were some things I wished it had that it didn't. So here is an overview of what has been changed or added. I created instructions to assemble it. I added screw holes, an…
This is a Nest with bones overlay tile replacement for the boardgames Gloomhaven & Frosthaven. It has a flat top for easy monster landing and like my other models no supports needed. In-Game Info Tile Name: Nest Gloomhaven Tile Count: 4…
Alatreon from Monster Hunter: World All design and copyright belong to CAPCOM I uploaded this model while ago and took it down to upload the finished version but gave up when I found several people took it and sell it. Now that it has…
Another model rip from Monster Hunter: World All design and copyright belong to CAPCOM Category: Creatures
Basic insert for Gloomhaven: Buttons & Bugs. Supports SleeveKings standard thickness sleeves I have thought for better token storage but nothing else that I could make work in the available space. There is about 2mm of lid lift (proof…
Thorns overlay tile replacement for Gloomhaven board game. This printed better than I thought it would but beware of stringing. Print instructions Supports: No Resolution: High
If you want to buy me a coffee :) https://buymeacoffee.com/methanejuice BOM (on top of the Vulture kit): M3x25mm SHCS qty 7 M3x30mm SHCS qty 2 M3 Nuts qty 9 #4 Screws (3/8" Long) qty 14 5 walls and 99% gyroid for orange parts, 5 walls and…
A futuristic ball holder inspired by wormhole geometry and radial symmetry. This sculptural stand grips sports balls (basketball, soccer, baseball, golf, volleyball) with elegance and stability, making it ideal for display or storage. The…
Gloomhaven: Jaws of the Lion Dashboard
A highly visible (and in my opinion, super cool) set of wormhole tokens for use in Twilight Imperium 4th Edition. This is a multi-color remix of the wormhole gate tokens for Twilight Imperium 4 by Vypper on Thingiverse. Just set a color…
Here's a nice fast one! I remixed MZ4250's Assassin NPC into a Bandit Guard for use in Gloomhaven! I changed around the hood and cloak a bit, giving him more of a bandanna instead of a scarf, and put appropriate weapons in his hands. This…
Stairs overlay tile for Gloomhaven board game. Rev1 has fewer stairs, Rev2 has more stairs and cracks, Rev3 has better brick definition and slightly larger scale. Tile Count: 4x (1 hex) Stairs Print instructions Supports: No Resolution:…
Multi-material/Multi-color version pictured above available on my Gumroad Store Overlay tile replacement for the board game Gloomhaven. Tile Count: 6 Square and Spiral versions with corresponding broken versions as well if you like you…
This is a miniature for the Gloomhaven Giant Viper monster. This is a bit on the large side, but I wanted to make sure that the scale pattern came through successfully. It doesn't entirely fit on my bases, so I'm printing a batch right…
Another model from Monster Hunter: World All design and copyright belong to CAPCOM Category: Creatures
UPDATE: Added V2 with material removed for less filament use, raised wall height to keep from seeing the color of the last card, and put a slope in bottom of the vertical car holder to keep them tipped back. Inspired by Gloomhaven Battle…
Updated and improved Single Color and Multimaterial/Multicolor version available on my Gumroad Store and my Printables Club . Flying monsters or summons can land on top of the water. Overlay tile replacement for the board game Gloomhaven.…
English. Are you tired of Gloomhaven's damage tokens creating chaos on your table? Solution to save and manage damage tokens easily. Español. ¿Harto de que las fichas de daño de Gloomhaven queden esparcidas y desordenadas por toda la…
Following along the path I started with the wood panel tiles , these are "flat" walls based off components from Devon Jones , in particular the bits from his ruined walls . Thanks so much Devon for providing all these bits! I'm modeling…
I remixed another of MZ's NPCs, this time to be the Gloomhaven City Guard. I did significantly less to this model than I did to the archer and so am a little hesitant to even bother posting it, but I decided to do so in case anyone wants…
I didnt like the bush models available so i decided to fix something myself. Really loved the tree model and used the tree canopy as my model for the bush. Printed with 0.4mm nozzle at 0.1mm layer height. Category: Games
So for those that have been following me for while on youtube and TinyGS, here is another treat, I have been working on multiple versions of a modified QFH antenna to get the smallest size and while keeping decent performance. This file…
After my first play through of this game I realized it was going to be a nightmare to pack everything away neatly in the same box. The insert I designed takes up about ⅔ of the box space. The original organizer has two small card storage…
This is an overlay tile replacement for the board game Gloomhaven. Tile Count: 6 Print instructions Supports: No Resolution: 0.15mm w/ 0.25mm Nozzle Infill: 10%-80% Notes: I put more infill in the spikes so hopefully they survive minis…
Flying monsters can land on me! More gas traps, ha!!!! Overlay tile replacement for the board game Gloomhaven. Tile Count: 6 Print instructions Supports: No Resolution: 0.01mm Infill: 15% Encouragement If you like what I'm doing consider…
Monster Standee replacement for Gloomhaven Board Game. Standee Count:6 Based off the artwork work of Alexandr Elichev . Works with number bases found here: https://www.thingiverse.com/thing:2872339 Print instructions Overhang threshold at…
Helmet holder for wall mounting with one screw. Very easy and quick to print Helmhalter für die Wandmontage mit einer Schraube. Sehr leicht und schnell zu drucken Ich habe PETG genommen Kann natürlich auch für andere Zwecke verwendet…
Abmessungen (Changpuak-Berechnung, 868 MHz) Frequenzbereich : 850-885 MHz Wellenlänge : 346 mm Boomlänge : 336 mm (Ø 18 mm) Elemente : 6 (Ø 2 mm, Messingrohr) Gewinn : ~9 dBd Elementlängen & Positionen: Reflektor: 167 mm (Pos. 0 mm)…
This is rubble for the board game, Gloomhaven. I made the rubble with larger "chunks" so that it'd be easier to print and also made a very slight flat level on the top of the rubble, so that standees could more easily be placed on top of…
!! You will find more add-ons for free / pay what you want in my ko-fi shop !! Wooden Walls for the MagHex system. Intended to use in Gloomhaven nd Frosthaven. Regular MagHex bases (3x3 mm magnets) are included. Prints well on .2 and even…
This is an overlay tile replacement for the board game Gloomhaven. Three versions available: normal and distressed versions with and without rubble on top. Tile Count: 6 Print instructions Supports: No Resolution: 0.100mm Infill: 20%…
Here is the model for Imhotep Bear. Imhotep is a good but gruesome Friend of Barry, and like his friend he seems to just want to be your friend too, do you have space for Imhotep? maybe he can keep Barry Company. I hope you enjoy, and…
This is a small remix of mbunds's Doric-Style Pedestal scaled down, made more slender, and with a shorter base. The scale was chosen to match up roughly with other columns that have been uploaded on Thingiverse. Print Settings Printer…
![[REMIX] Stone Pillars for Gloomhaven with 6x3 magnet Holes for Maghex](https://media.printables.com/media/prints/191252/images/1793058_b3977f03-5ded-4370-ab38-6b3fc28d5ee3/img_2250.jpg)
![Twilight Imperium Wormhole Tokens [thing:4866300 remix]](https://media.printables.com/media/prints/317986/images/2777025_a621fef1-5cb2-4840-9242-7b7df00b92aa/pxl_20221120_190403314.jpg)
