Counting matching models…
The Microbot Fidget is based on Hiro's Microbot from Big Hero 6 Both the parts snap fit together. Print details: Material Used : Prusament PLA Prusa Galaxy Black Layer height: 0.15mm Supports: N o Brim: Yes (Only for vertically printed…
Gamer case for your BBC Micro Bit Features: Easy to print Easy to handle Allows access to all the board features You can attach the battery box in the back. https://www.prusaprinters.org/prints/20132-case-for-bbc-microbit Print…
This is a controller shaped case for the BBC Microbit with a detachable battery holder that fits the standard 2xAAA (JST-PH) battery pack for the Microbit. The original design for the controller case was done by Guillermo Melantoni…
My first semi-successful version of Print in Place Microbot Fidget! (microbot v4.stl) I printed it at 40% infill with supports in the orientation of the stl. The portion of the microbot that was touching the supports was very messy (I'm…
Any feedback is welcome Because of the frequent use by young people it seemed smart to make a case to protect the Micro:bit against falls and damage. This is an easy snap-on case that keeps all functions of the Micro:bit working while…
1:48 ORIGINAL SCALE ▪▪▪▪▪ 18 PARTS ▪▪▪▪▪ 39 X 88 X 41 MM ▪▪▪▪▪ STL FILES ONLY ▪▪▪▪▪ ❌UNSUPPORTED FREE EDITION — a free simplified and smaller version of the complete model based on LEGACY EDITION (see the comparison table in the picture).…
Holder 32 4mm hex precision microbits compatible with Zack Freedman's Gridfinity organization system. There are lots of other similar holders our there, but most of them either included a slot for a screwdriver I don't own, were too big,…
You can fit the MicroBit Board alone or the "GAMER case for BBC MICROBIT" Download it here: https://www.prusaprinters.org/prints/20112-gamer-case-for-bbc-microbit It also has compartiments for: USB Cable Battery Print instructions No…
I have created multipurpose battery pack holder for BBC microbit. I have spent lots of time perfecting it. It can stand on its own, be clipped on lanyard or with use of velcro strap used as wearable. Now i am releasing it out in the wild.…
The Microbit v2 comes with a very clever cardboard battery holder that you have to fold. I replicated the original design and made a couple of variations, including the Animal (which loosely resembles a racoon). Important : this model has…
Portable and modular drawer organizers designed to prevent losing your stuff or constant reorganizing Quick detach wall mount Printing and assembly: For printing I recommend standard 2 walls with 10-15% infill using pretty much any…
I have created multipurpose battery pack holder for BBC microbit. I have spent lots of time perfecting it. It can stand on its own, be clipped on lanyard or with use of velcro strap used as wearable. Now i am releasing it out in the wild.…
I needed replacement for original knobs/sliders because they are sticky from uv light so after couple years they useless. designed in fusion360. sliders are tight fit! Sequener pattern knob is difrent so i designed also this variant.
A simple, quick-to-print design, borne of the necessity to afford a modicum of protection to this hardworking educational tool in its travels to and from school. Plus, who wouldn't want a Micro:Bit on their fridge or whiteboard? Design…
Hand bender for 10mm pvc coated copper and 16mm alupex please print solid.
I work as a microbiologist and designed this keychain as a Valentine's Day gift for my laboratory personnel. It is a fun and easy print that does not require supports! It can also be scaled for a smaller keychain charm too! It would be…
Cool Articulated Microbot I made!
microbit case with integrated breadboard. For small tinker projects or if you just want to quickly test something out. What you need in addition - a micro:bit GPIO Expansion Board I have also posted a version for the Raspberry 3 and 4.…
Microbio case in form of the aztec rain god Tlaloc
Fits 6mm D shaft potentiometers. The pattern knob is a switch and has larger base than the potentiometers. The lys-file contains all required knobs. Good results with both FDM and resin. I printed mine with translucent red resin.
Got bored from duck taping the original frame after every hit to a wall. This is durable, but you should order more props ;-) New PID tune is required, in general, lower the P-gain for 10-15%. Print instructions This is 105mm frame for…
Triboelectric nanogenerator (TENG) is a new type of generator for “green energy”. In our study, a novel “pause-and-insert” and “print-in-place” 3D printing approach has been devised, employing widely available fused deposition modeling…
A tiny and low cost protector for the microbit V2/V2.2 I use in robotics classes. Contacts remain exposed for sliding into pin breakout board. Assembly: Start by sliding in the buttons and then push the snaps until click. For disassembly…
Remix of georgmierau's brilliant remix which is based on rayjizza’s model. My version allows the touch pins to be used.
The model is accurate enough to base case designs off of it, but is missing the large square on the back
Still a work in progress, works but needs some refinement. Visit our blog to see this and other projects we have completed https://realbaddad.com 3D Printed Fortnite Axes & Props - https://realbaddad.com/3d-printed-fortnight-axes-props/…
Since i've changed from a Wowstick to an electric screwdriver i wasn't happy that i couldn't use my bits anymore because they are microbit. With this adapter you can put your microbits onto your regular bitholder. For a good fitment i've…
i designed this microbit case to be used as a nametag. the rear compartment holds the batteries, the front is designed to display the microbit.
Tool to help with removal or installation of the Pentair Microbrite lights. Yes, if you buy a Pentair Microbrite light they do provide you with a nylon tool but I did not get one from my installer. FYI https://wakinglighting.com/ makes a…
Modified the Bear Upgrade 2.1 optional reverse bowden to fit the original M5 fitting (PC4-M5) used by Prusa for the MMU2 cover. The vslot mount is available in two versions: angled or normal. I bought the fittings here:…
A remix of the spoolholder clip to use Tappex Microbarb M5
Un piccolo gioco per dare concretezza alle lezioni di coding con Micro:bit. Buon lavoro a tutti! PS: è necessario impostare un cambio colore per poter avere il cerchio bianco intorno all'8 PPS: avevo finito il nero quindi versione…
As a teacher, the need for having a place for alle the things needed is nice. So I made a storage station for the Microbits. fits 20 microbits. compatible with v.1 and v.2
Modified the Bear Upgrade 2.1 Extruder (BearExxa) Cover (fs-cover) to fit the original M5 fitting used by Prusa for the MMU2 cover. I bought the fittings here: http://lecktor.com/en/nuts/159-tappex-microbarb-m5-pack-of-10.html Print…
I developed this microwobbler (2g) mainly for surface fishing of european chub, but also for other species collecting insects on the surface. The wobbler is equipped with one hook and is floating. A simple wire skeleton is inserted into…
Microbot Model from Big Hero 6 This Microbot model is a detailed replica inspired by the iconic microbots from the movie Big Hero 6 . Designed to capture their sleek and futuristic look. Perfect for fans and collectors, it serves as a…
I was tired of having to put my microbits back in the Box or having them fall around my workspace when working on projects. After i saw a holder for the standard ¼" bits i designed my own version for the 4mm Version. The last two rows are…
The MMU3 kit as of this moment is not available for upgrade and many of us want to get the unit off the shelf collecting dust, we need these files to be able to make the thing work. I could not buy the kit/ Tappex Microbarb. So I went…
Adapter to hold a Pixel 7 Pro in place on the Carson MicroBrite microscope.
Game controller for BBC Microbit. Needs some more work.
made to fit the microbit step counter project here→ https://makecode.microbit.org/projects/step-counter
Micro Burner - for MicroSwiss DD A modified mount to fit a Voron Stealth Burner on your Ender 3 or 5 using the MicroSwiss DD Ender 3 - this comes in a few flavours to choose from No-Probe BL Touch Inductive There is a small clamp on the…
https://www.printables.com/de/model/543123-chimney-base-without-tappex-microbarb
I bought a cheap Ants Make AM-044 Micro:bit game controller for my students, but it was missing cover for the fragile electronics so i designed one on my own. This does not fully cover the device, leaving a space between to expose some of…
Depending on your printer and Microbit, you may need to scale the STL accordingly to get a good friction fit
Tento model je vylepšení mého modelu Kryt na Micro:bit (Microb:bit cover). Vylepšením je přidání boxu pro držák baterií. This model is an enhancement of my model Kryt na Micro:bit ( Microb:bit cover ). Improvement is to add a box for the…
Stand for micro bit in flower pot. Outer diameter for pipe 8 mm.
Now you can add your Microbit to your Prusament spool and use it as a race steering wheel I had to print my own Prusament spool since I don't have one empty. Here you can download the program to your Microbit…
This is a very small and customizable belt tensioner with a very low profile on the belt movement. By default the lost belt movement is about 23mm using a M3 screw and nut. However since this is customizable you can shrink it even more if…
tubes de 4 mm de 25 cm de long insert M3 de 4.5 , inserts M4 de 6mm pour la collimation, j'ai mis 6 vis M3 sans tête longues donc clef alen de 1.3mm à mettre avec le dobson pour les oculaires 24.5mm : voir amazon pour le miroir 76/300 et…
I was looking for a cool design for my micro:bit on the Christmas tree and found Kitronik's ( https://kitronik.co.uk/blogs/resources/mipower-microbit-christmas-baubles ) page. Their perspex designs caught my eye. Since I don't have a…
NEW 10/AUG/2025: Reinforced version that takes an m3x16 flathead and two heatset inserts, for strength.
This is a Gridfinity 2x2 holder for the Wiha 75992 27-piece microbit screwdriver set . I think that the handle has changed a few times based on reading the Amazon reviews. Mine is the yellow one that holds the bit in with a magnet. I made…
A Microbot from Big Hero 6 which makes a surprisingly addicting fidget! It takes three 6mm x 3mm (diameter x height) magnets for one microbot. If you're learning about embedding other materials in your 3D prints, this is a fun place to…
I created this little project as a way to avoid undesired interruptions at work. With the A button you can change the your state between "free" and "busy". You can also turn off the LED matrix display. With the B button you active a 20…
A circular and iconic case for microbit V2/V2.2 with snaps to grab on both sides. Use minimal support to print the small overhangs. Assembly: Start by putting the buttons through, and the snap over the sides of the board. You can use a…
https://MineeForm.com/ ✅ Unlock All STL Files Immediately ✅ Make Money by Selling 3D Prints ✅ Only $10 a Month (Cancel Anytime) Category: Models
This is a case for the BBC Microbit which can be 3d printed in 2 pieces in less than 1 hour. It can be used to attach the microbit to clothing either by a hook which clips onto a pocket or a hole where a safety pin can go in. The back…
I added a little handle to the middle of @Fabmaszter's insert. I thought it would also be good to keep the little cards in separate piles. After printing it, I'm not sure it's any better. I also incorporated the 12mm overall size,…
Heat-Insert Nut *4 m3 screw *4
This block was designed to fit the Ks0308 keyestudio Motor Drive Breakout Board for micro bit and the BBC microbit.
Microblivion II r1 - toothpick frame remix from @Dave_C_FPV original design. Revision 1 (11gr): I´ve removed the 16x16 stack holes (i´m using a whoop to 20x20 stack adapter for now) added a suitable tray for XM/XM+ receivers, with holes…
SQ-ES126 and Wiha Go Box MicroBits Stand A stand for a Sequre ES126 electric screwdriver and the Wiha Go Box MicroBits Set. Description I have one of the ES126 small electric screwdrivers from Sequre. This model has more torque than the…
This is a tiny organizer for a tiny game: Microbrew. Not really necessary but I like not having to dump all the wooden pieces, sort them and put them back every game. So you can just take out the little box and start playing. Print should…
This is a low-cost and easy-to-program device that allows users with motor disabilities to use Morse code in order to type on a computer or mobile device. The built uses the Microbit's Bluetooth capabilities to send keystrokes to the…
Based on https://www.printables.com/model/511086-microbit-protective-case
I've enhanced my micro:bit movemotor kit by incorporating a clip designed for the front, ideal for attaching shields, weapons, and various accessories. Additionally, I've affixed LEGO blocks to the mount using glue, providing an easy and…
Microbit adapter for smars V4 Lite, you can find it here https://cults3d.com/en/3d-model/gadget/smars-v4-lite extra parts: shield https://s.click.aliexpress.com/e/_9zuxxn microbit https://s.click.aliexpress.com/e/_9HFrTJ Category: Robotics
54 microbube holder for barocycler tubes Category: Biology
Description: A tool to automatically take photographs of petri dishes. Holds up to 10 petri dishes Frequency of photographs is configurable between 4-24 hours Create time lapse images of bacteria and fungus growth…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
Jednoduchý kryt na Micro:bit. A simple cover on the Micro:bit.
A simple case for joystick module
You can to use cotton wool to fix micro:bit i case, rather than use glue or scaling down the size of the case.
This model only includes body and wheels and no instructions on how to use and setup. This model is only shelf model and final version will be available July 1st.
The idea for this came from Thing 11977, although the design is all new. Basically, it's an apparently impossible dovetail joint that opens by rotating. My interesting little observation was that it needs almost no thickness, and no core,…
Stand for Arturia Microbrute, has a slot for rubber feet of the synth. You'll have to print two of these. For a print bed size of 256x256 you can only print one leg at a time.
El modelo esta realizado para colocar sobre el caño horizontal del timón de direccion por encima de la tela. tiene un diametro de 15 mm para utilizar en caño de 13 mm sumado la tela y la pintura. soporta LUZ WHELEN MICROBURST I TAIL LIGHT…
All the same features as MicroBins but in a compact 2x2 form factor. Printing and assembly: For printing I recommend standard 2 walls with 10-15% infill using pretty much any material you want; the only supports needed are for the front…
L-Boxx mini Einlage für Wiha Microbits System 4mm mit Fächer zum Herausnehmen, es passen auch die Bits von Brightison Feinmechaniker Schraubenzieher Achtung! die Bithalter01 passen nicht in die Mulden, sie liegen bei mir nur oben auf
The lift bracket for the Danco 10071 Microban Dual Flush Toilet Handle is made of a plastic that is quite brittle. The hole that the retaining pin goes through is under a decent amount of stress during use and, in my case, broke. Instead…
The sensors from Seeed come in packages and end up all over the place. These two trays hold all of the sensors, connectors, the shield, alligator clips, microbit, and LED strip in one place that fits perfectly in the original box. One…
Carcasa para Microbit con el personale de Yoda. Ideal para la programación de la tarjeta Microbit como mascota interactiva.
This one is parametric and is done in OpenSCAD. I've also added some notches to make it clip into my screwdriver (Dnipro-M CSD-36X), but you can probably adjust parameters to your filament and printing process. There are also several…
Microbit set box for Stanley Mini 0,3 layer PETG MK3S+
Supercooler kleiner Bit-Dreher, den man immer brauchen kann - Danke an den Ersteller … da ich gerne mit Micro-Bits arbeite, hier noch ein entsprechender Adapter dafür … Der Adapter steht ca. 5mm über, damit man ihn auch leicht wieder…
Od OMG Robotics jsme si koupili jejich jezdítko Simple Car včetně joysticku na rozšiřující desce MB2. Rozšiřující deska má akumulátor přilepený oboustrannou páskou k desce, což se mi pro používání s dětmi moc nelíbílo. Tak jsem vytvořil…
This is a case for a micro:bit expansion board. These boards aren't precision-made, so yours may be slightly different. I'm providing step files for easy customization.
Hi all, This is origanaly uploaded for a competition for 3D printer hosted on My Mini Factory. https://www.myminifactory.com/pages/bbcmicrobit The Case.stl can be printed without support and must be done on its back- with the walls up The…
This is inspired by some other holders. It holds 5 14mm sensors and was designed for a 1x1x1 box. Be sure to put foam in the top of the box to avoid sensor damage/ movement during storage. Probably best to use MSLA, have not tried FDM.
This is a case to hold the microbit and 2 audio jacks to allow a user with a disability to plug in their preferred switches and send keyboard commands to a connected computer via bluetooth. Build instructions for a case free version is…
Naším cílem bylo vytvořit ochranné obaly na pomůcku, kterou využíváme v kroužku robotiky a také ve výuce informatiky. Microbit je malý počítač s velkým srdcem, chceme jej chránit
Just the STL, OpenSCAD files for the parts used in a small robot cat along with the circuitpython code to get it moving. http://makerblock.com/2021/05/building-the-monocle-top-hat-cat-for-microbitvirtualconcert/
Support for mounting the BIQU Microprobe on the Anycubic Mega printer To fix the probe to the support, use the screws and nuts provided in the probe kit. To fix the mounting bracket to the printer head, use 2x M3 screws + nuts Offsets: X…
Since I don't have the matching GoPro adapter to attach my bicycle headlight to the new "cockpit", I designed this simple adapter that screws to the underside of the bike computer mount, similar to the included action-cam adapter. It…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
This is a modified FS cover from the original MK3S+/MK3.5S parts, featuring support for the Tappex Microbarb M5 brass insert. It does not change the hight and is easy to print.
