Counting matching models…
These are simple paint supports. Three versions, with different rounding. On wood boards, depending on the weight of the piece you paint, the pointier ones may leave a mark, hence the more rounded ones. I recommend the 3mm rounded ones.…
We made a custom g-code generator for printing rectangular wave springs in midair because you can't really buy them anywhere. You can adjust the width/length, corner radius, number of waves, and many more parameters to suit your needs.…
If you want to support my work, you can buy me a coffee . Also check out my other models .
The pictures show a dual color, (just stopped the print and restarted with a new color) but these work great. we have one ipad mini used for spotify and the other allows us to look at settings different from the display. but we can just…
Continuing with Fortnite Medallion ideas. Send me any requests you may have.
This model is compatible with the lego system.
Pinza-Clip para bolsas de comida - 9 cm (90 mm) y 14 cm (140 mm)
Designed to hold my 6 ice hockey team pucks. Print base only for a 3 puck stand. Add 3 insert for 6 puck pyramidal shape stand. I played with print settings for insert to show infill.
This model is compatible with the lego system.
I backed the Studio-X Mobile Paint Studio on Kickstarter and now that it appears that project will never deliver, I've decided to make my own version. In the pictures, the green case is holding both the Army Painter Warpaints: Mega Set…
Queen Amidala Bust and Base. Based on images from https://www.deviantart.com/newyunggun/art/Star-Wars-Episode-I-Padme-Amidala-1-620221287 Note Pictures show models before base was added. Model has been hollowed out to save material. I use…
This technically done but I consider it a work in progress cause it could be cleaned up more. 10/18/2018: Modified Carry Handle and Stock due to bad fit and thin parts. Added connecting structure in Carry Handle to strengthen hold.…
This model is compatible with the lego system.
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Mobile phone holder to operate the Midas M32 and display processes/ information for better work. If necessary, the angle can be changed so that the Midas can also be operated in a sitting position.
Originally published here: Pyramidal planter by tato_713 - Thingiverse A simple planter, harder to design than expected. You can use low infill to save material. The walls are 3mm thick so the model can be safely scaled down up to 3 times…
Manzana 🍎 Español: Una manzana alegre y segura para imprimir en 3D, perfecta para cocinas de juguete y juegos de rol culinarios. Ayuda a los niños a aprender sobre frutas mientras juegan y desarrollan su creatividad. English: A cheerful,…
Lara Croft turned gold in the iconic Palace Midas death cutscene.
Side attachments for Midas MR18 and Behringer XR18 Air Mixers to protect the device body from scratches and possible liquid spills on the ground. Adds 10mm space from all sides. Print one piece for each side, which requires four M4 x 10mm…
Flowerpot with pyramidal patern internal dimensions: diameter bottom 80mm diameter top 100mm height 75mm
These are alternative shelves for the MiDAS portable miniature painting studio. NOTE: The paint bottles will likely interfere with hanging brushes, making these shelves less practical. The normal shelves can hold 23 Vallejo/Army…
Diseños variados de comida infantil para jugar. Ahora mismo, he subidos modelos de: huevo, aguacate, queso, plátano… Iré actualizando :) Assorted designs of play food for kids. Right now, I’ve uploaded models of: egg, avocado, cheese,…
Finally got around to revamping and improving my Pyramidas Figure. The deluxe toy from the 90s is too huge for a regular shelf, and there's a 6 inch figure, but it's rare and expensive for what it is. My figure is scaled to be around 7-8…
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed No Brim needed Scale it as you like :)
Caja de cereales y de pasta para barbie escala 1:6 en varios modelos
There are 3 versions, one with sharp edges and one with rounded edges (to protect the plants or the fingers). The third is an in-between. The walls are thin ( 2.8mm) to reduce the use of material, I recommend to make 100% concentric…
Dado para elegir comida el fin de semana o cuando no decides que comer
This is just a small remix with the mid-air holes fixed to print without supports for the 6-column tented version.
Se recomienda imprimir con varias capas de relleno para darle mas resistencia a la pala. aproximadamente da para una palada de unos 500 gramos de pienso.
This pen holder is a very easy print; no supports required. There are four configurations available: Intimidating Pen Holder_Arms & Legs: As shown in the pictures Intimidating Pen Holder_No Legs: Face & arms only Intimidating Pen…
this is a star wars coaster I have created a complete series of coasters about star wars don't forget to see the rest of the models and leave a like thank you CUB SOCIOS: https://www.printables.com/@tecnoculebras#join:484 PATREON:…
This misleading temptation to construct the pyramid with the small pyramid at the top will not work. Finding an alternative path to a solution is not hard, but maybe a little surprising. This is a good 3D visualization puzzle for…
This is an organizer tray for the threading change gears for a Smithy Midas 1220 LTD lathe. All slots are marked with the gear tooth count. There are spots for all gears, including gears currently in use on the machine. Hopefully it makes…
Lo creen en fusion 360, se aceptan remix! quiero ver sus ideas!!!!!! para los indesisos en que comer!!! Agrege solo comidas argentinas, pero tambien puede tener muchas mas caras y muchas mas comidas!!!! Este ejemplo lo imprimi en 0.2,…
This design features a hemispherical base cradling a geometric, dome-like lattice structure.
40x40 mm prý by to mělo brousit žiletky :) 40x40 mm supposedly it should sharpen razors :)
This scope goes along with the Printable Mida Multi-Tool done by NXFreemo on Thingiverse. I removed the lenses so you can see through the scope if you want. Had to clean up the model a ton! Breaking it up into the parts seemed the best…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
This is a female connector for the union of leg prostheses, the conventional thing is to manufacture it in steel or titanium, however for educational or demonstrative purposes or rapid prototyping it can be printed. I hope it works for…
Español: La idea es tener un envase modular en donde se pueden imprimir módulos individuales para hacer el envase del tamaño deseado. Se pueden imprimir las esquinas solamente si se quiere un envase más pequeño y recogido. Hay dos…
💖 Support Me If you like this model and want to use it for commercial purposes, you can support me on Patreon and get a commercial license: https://www.patreon.com/cw/MonsieurPierre A detailed 3D model inspired by Midas from Fortnite .…
Arrow tube for the Cartel Midas RX10 bowstand. Put a few layers of foame rubber on the bottom and cover it with a wooden or plastic disc to prevent the bottom being pierced by the arrow tips. The bowstand stays foldable. Enough space for…
The the previous bowl I posted this one takes each facet of my Diamond Faceted Bowl and cuts it into 3 or 4 other facets by pushing the center out. It takes some crazy 3D sketches, every one of the triangles being unique and then…
It is a two piece design of a kamidana.
Replacement for the cracked rotary encoder under the display on the Midas M32 mixer. If you like the model, I would be happy for your like. Pokud se vám model líbí, budu rád za váš like.
Es un simple plato elevado con una base en la cual se le puede verter agua para evitar que las hormigas lleguen al alimento.
This is a case designed for the D1 Mini esp8266 board and DHT11 sensor. It was designed for the use as a smart sensor for home automation,specifically espHome and Home Assistant. Hardware: D1 Mini ESP8266 Board Digital Temp and Humidity…
Printed with ABS and sanded the top surface with 220 grit before applying the bleach. I used ABS because I have a spool I never get to use, but any material should be fine! Related links: Original post about bleach printing with…
After seeing a question about creating pyramidal depressions on the Fusion360 subreddit I decided to try applying that to my base bowl design. It took several tries to get the affect I was after. In the end I used some crazy 3D sketches…
Caixa estanque para manter o filamento em uso com baixa umidade. A caixa vedada permite que a sílica remova a umidade do ar e mantenha a umidade em valores baixos. Para montagem: encaixe os rolamentos nas pontas do suporte central…
Minimalistyczny emblemat przedstawiający Artemidę , grecką boginię łowów, dziczy i łucznictwa. Stylizowany profil z łukiem i kołczanem strzał to świetny motyw do: projektów dekoracyjnych, cosplayu, medalików i breloków. Nadaje się do…
No pude encontrar una opción en castellano, así que la hice, siéntanse libres de modificarlas a su idioma. Las medidas de lado son 16mm, pero he probado que para los dados lo mejor seria una medida de 25mm Las opciones de comida:…
This is a Namo Amida Butsu script block that I created to place on our pure land alter. The Nembutsu text was taken from a Japanese scroll created by a zen priest. I printed this on a Bambu Lab P1S using the standard .20mm setting. The…
Jednoduchý model prstýnků, bohužel si musíte trochu pohrát s velikostí, ale tisk jednoho trvá cca 10 minut
hobbico dromida futaba s3114 servo mount to fit a futaba s3114 servo in the dromida 1:18 4wd sc truck Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: .2mm Infill: any Filament: any any any…
Built a tire coozie for a friend out of his Super ATV Intimidator threads. This model is messy, and the tree clean-up took a while.
Hi, I am working for an EMS-Provider (Electronics Manufacturing Services) and our SMD specialist begged me to design him a storage box for his precious midas tools. A midas tool is a changeable mount tool head for a MyCronic…
This 3D-printed Pyramidal Resonance is a meticulously crafted replica inspired by Destiny 2’s Salvation’s Edge raid, capturing the eerie and mysterious design of the Witness’s Pyramid technology. Featuring sharp geometric edges, intricate…
Žáci společně vytvořili pomůcku do výuky Dějepisu – Starověký Egypt - Pyramidy. Od sběru a zpracování dat, po modelování a vytištění na 3D tiskárně.
Midas is one of the most important storyline caricters
Module of Wemos D1 mini logic unit for two stepper motors. Logic sensors can control the behavior of the motor (speed and direction), which you can also control via MQTT communication. In the Device settings menu, select the 9-motor…
Replace your worn out grips for your Bob Long Vice (Gen 5 Intimidator) paintball marker.
“Laundry Bottom” file from source model needed a bigger opening to accommodate Tide detergent lid
Candle holder in a pyramidal design. Needs no supports. Has the proportions of the Great Pyramid of Giza. Assembly and usage video: Download an older version...
Tisk: PLA print detail 0,28mm. Hardware : MAX7219 matrix displays + pyramidak lcd display control module + 4 screws M3x8 DIN 7985 and nuts M3 DIN 934 Firmware : pyramidak parola firmware (firm.jantac.net)
Puzzle pyramidy s podstavcem. Velmi jednoduché.
Transform your space with this mesmerizing geometric abstract sculpture that brings modern artistic flair to any 3D print collection! This stunning STL model features intricate angular facets and flowing organic curves that create…
Tisk : PLA print detail 0,28mm. Hardware : MAX7219 matrix display + logic unit WeMos D1 Mini + optional 3x round magnet 11mm + optional thermistor DHT22 Firmware : pyramidak parola firmware (firm.jantac.net)
3-4 screws M3x8 DIN 7985 and nuts M3 DIN 934 Great thing is that you can choose from multiple sensors from different manufacturers and connect only the ones you need. The sensors just snap into the ports. The values 1-Good, 2-Fair, 3-Bad…
Intimidator ball detent. I designed this for my gen2 2k2 Bob Long Intimidator. I printed them out of TPU 95A on a bamboo. Works with Spyders too.
Žáci vytvoří praktickou učební pomůcku – pyramidu (může mít různý počet polí), kterou budou využívat pro procvičování matematických operací ve vyučování.
Modelo 3D de una tapa de cubierta para impresión 3D
dispensador de comida usando motor da starlink g2 sucata
Žáci 5. ročníku vymodelují „sčítací domeček a pyramidu“ pro své mladší spolužáky. Razítka budou fungovat pro předtištění při počítání, zrychlení a zefektivnění výuky matematiky na 1. stupni.
This design features a hemispherical base cradling a geometric, dome-like lattice structure.
This misleading temptation to construct the pyramid with the small pyramid at the top will not work. Finding an alternative path to a solution is not hard, but maybe a little surprising. This is a good 3D visualization puzzle for…
Cartel para nevera,para 2 imanes de 8mm x 2mm.sencillo y facil de imprimir.
A replacement for the plastic bit between the movable shower head and the rail. Site didn't have any replacement parts for this bit so I made one.
Yogurt y leche-zumo para barbie escala 1:6 en varios modelos impreso en 0,15 mm solo el yogurt sin tapa necesita soporte
You do not need CFS or AMS for this print or any of my other prints. Add a pause on the correct level and change the filament. Then continue on. You can resize but not the height. Design Concept The model captures Padmé Amidala from Star…
Star Wars - Characters - Queen Amidala 3D printable model.
A partial replacement (designed for temporary use as a spare). This hinge pin holder lets you keep driving while you wait on an order. It could be modified or strengthened, but I just needed a quick fix for the kids to keep driving! Print…
Remixed doors for the MiDAS Mobile Paint Studio Print: 2 sets off latches from the original model Use snug supports with a 40 degree or less threshold to minimize waste Door-Split-Band-Latch-A.stl Door-Split-Band-Latch-B.stl For larger…
Removable trays for the MiDAS Mobile Art Studio. This framework will be allow for a number of alternative features but does reduce the overall total storage slightly. UpperFrame.stl was printed at .3mm Removable Tray.stl (x2) was printed…
Se imprime en PLA con la parte de los orificios apollada en la cama, con un 15% de relleno es suficiente.
Guida i rifili di carta all'interno della bobina di sfrido, va installato sulla sbarra sopra le lame
