131 models
Just a mirrored version of the original. I hope you like the model! If you want to support my work you can Buy me a Beer !
Print approx. €1.17–€1.43 excl. taxPreliminary estimate for PETGSource material: PET
Many thanks to @wuerfel for the original model!
Print approx. €1.15–€1.40 excl. taxPreliminary estimate for one variant
A mirrored version of the Fiesta Drawer with phone holder by Jacques Strauss for all people having the steering wheel on the left side of the car. Photos 2 and 4 show the version printed with a 0,3mm layer height almost without post…
The original MK3S+ Y-rod holder is quite impractical if you want to remove the rods from time to time for maintenance. This is a remix of the original .stl so the top can be taken off. On my printer I just replaced the front two holders…
A mirrored lotus ring gifted to Frieren by Himmel while adventuring. This is for people who want extra props while cosplaying Frieren or Himmel. Print with Resin and an advance warning that this print will be very delicate. The inner…
Fern's birthday present from Stark while the party is travelling. The mirrored lotus design is traditionally given to one's sweetheart…not that Stark knew of this at the time. This is for people who want extra props while cosplaying Fern…
Neptune 4 Pro extruder 90deg with chain female mirrored to connect your Extruder with the chain. Infill 100% No suppor
You'll need to go to the original storage system for the actual drawers. Find the original storage system here: https://www.printables.com/model/988687-stackable-shelf-organizer-drawer-system Find the Stackable Shelf Organizer here:…
I mirrored all the parts and saved them to separate files for easier printing. I recommend using the supportless versions and using generated supports instead. I'd like to create my own custom supports for the body sometime, but that's a…
Bracked mirrored. Remix from https://www.thingiverse.com/thing:4943241 Category: Electronics
This is a remix of the beautiful design by jreimers ( https://www.thingiverse.com/thing:2927535 ) and it addresses two issues: The original design portrayed a left hand. Scouts do their this gesture with the right hand (although they…
This remix was commissioned by a fellow V1E maker, Deadlystrike (username on Printables). Also, this listing's lid got remixed without the hold on top for TFT, as requested by a fellow V1E maker, @Mike_2205479 :…
Everyone I handed this toy too loved it, but always instinctively started operating it backwards, despite the arrow. It felt unnatural to insert the pull rod across the left hand, on the left hand side of the gear. I mirrored the design,…
Original Model by: @FafCerebrate_270347 A switch cart holder that as you spin it, the games will pop up to make it easier to read and pull them out. I recommend printing the base in 0.12 layer height so that the ramp is as smooth as…
I found it awkward to use the knife in my left hand, as the springs doesn't work correctly when you touch them. It is based on the "negative hook for better catch - guided" files. Basically just mirrored everything except for the makers…
Mirror version so it fits on the left side.
Poor cable management can lead to print issues quickly so fix it with these. Easy to print and you can just zip tie on!
This is MLampe's camera mount but mirrored so it fits better on the right side of the printer. With the original, I was having issues with the X carriage/my 5015 fan hitting the camera, so I mirrored it.
This is a remixed version of the "TOOL CUP FOR AD5X" designed for enhanced mounting flexibility and a cleaner aesthetic. This holder mounts directly onto the base of the spool holders, providing a convenient and accessible spot to keep…
Remix with gaps for all ports and a mirrored mounting plate option. See original model https://www.printables.com/model/705053-mountable-esp32-screen-cyd-case-with-pen-holder for instructions. All credit to @Sijeveenstra_996957 for the…
Indian Logo with a mirrored version.
I have a sheet holder on the right side and the LED stripe installed. Thus, created this remix which mounts on an additional vertical screw and is mirrored for left use. This remix is inspired by the LED stripe solution provided in this…
I often use Startrkfan2's numbers to mark my design iterations. Since i usually mark my models on the bottom layer i always needed to mirror the glyphs and reduce the height to 0.4mm (that way it's at least two layer high at my most…
This is a remix of the model on Thingiverse from JooztNL and a modification by @DirkHoefle (THX to both) This model combines the base with the closed design and the lettering on the top is rotated 180°. The original design has slight…
Mirrored Modern spiral planter
I moved the "arm" to the opposite side. The original is a left side clip and this one is a right side clip
My model was made four years ago, which I brought over from thingiverse. I don't know why Einsy's box opens inside. This makes it very difficult to access the wires. I flipped the original box and tweaked it slightly to cover more at the…
This short video explains things fairly well: Peter H's amazing design of “fenders” for the LowRider v3 … now remixed by both Peter and myself to fit various tall YZ Plates, as well as stock plates and tall YZ plates combined with my…
Due to having to change the right case to fit the shorter wires, a mirrored bracket made the model look better.
Update 18/07/2024 Added remixed bracket for attaching the cable chain and filament sensor I now use a reverse bowden to the printhead and a feedtube from the filament to the sensor They are both attached using PC4-M6 pneumatic fittings…
Top Mount Spool Holder for Kobra 2 and 2 Pro - Mirrored
Trashcan Mirrored for the left side. Gespiegelt für die Linke Seite. No need for Support.
The Ball of Mirrored Dodecahedra was created by combining mirrored dodecahedra into a rounded, intricate shape. Its interlocking facets make it visually striking, and offer a hands-on example for math enthusiasts exploring complex…
Mirrored version of @RedWish's EBB36 PG7 Mount behind NEMA14 stepper
REMIX of https://www.thingiverse.com/thing:4677192 I remixed the tiles that needed a mirror image. 3D models for Cities: Skylines - The Board game https://boardgamegeek.com/boardgame/267370/cities-skylines-board-game Board game published…
Allow the correct X-X1 and Y-Y1 belts routing for the BRS-AWD drives upgrade
This is a mod to mount mirrored orbiter 2.0 to Stealthburner but not it is not tested. If you make one please comment so others can see if there's anything that needs to be modified
Perfect for siblings or multiple Yoto's in the house and you need easily identifiable holders.
Pinecil insert with large bottom for large cable with mirrored Pinecil stand for the Rugged Multipart Pinecil case. I want to keep the case pointing away from the workspace so I mirrored the pinecil stand.
Night Owl Style OT mando helmet Untested. Category: 3D Printing
I liked the template design by Flashhawk (https://www.printables.com/model/160874-gaslands-32mm-width-moving-templates). This remix mirrors the templates for swerve and veer to handle left veers and left swerves. The original design is…
Mirrored fan duct for the dual fan mod. https://www.printables.com/model/601263-ender-3-neo-dual-fan
Today’s print is a variant of yesterday’s ornament , featuring the same open spiral pattern but mirrored for a fresh visual twist. The result is a subtle but elegant variation that pairs beautifully with the previous design, especially…
I would print it with the same parameters as the mk4 parts: Print settings: 0.20mm QUALITY Filament: PETG (tested on Prusament) 15% Grid infill You will also need for each holder: M3 x 10 screw - 1 piece Square nut M3nS - 1 piece
An artistic sculpture resembling a double helix could be a shelf sculpture, trophy, or award. This model was NOT created with any use of AI. Note: Nov 2024 - redid the entire thing - fixed geometry problem - with an FDM printer, print the…
This box fits the deburring tool from Meistergriff: https://www.amazon.de/MEISTERGRIFF-Entgrater-inkl-11-Klingen/dp/B093PQXJCS/ Printer: Prusa MK4 Filament: Bottom in Prusament PETG Galaxy Black, Top in Prusament PETG Mango Yellow
Thicker top for MK3S+ Y-rod holder mirrored. I made it to be able to print it with 0.6mm nozzle.
Just a mirrored version of the Mk3 extruder, but revision 6 I could not find one on printables so I grabbed the files from the original Mk3 extruder and mirrored them, so you don't have to. I also included a reversed filament lever…
If you use the crown on the left side of the device. Then, the text will be upside down on all other charger designs which rely on the crown being on the right side. This is a simple remix with the model being mirrored.
same as original but made it a bit shorter & mirrored
Remix of the back right leg(Mirrored). This model replaces the bottom back left leg of the enclosure and allows you to run your cables straight back and out through the rear left leg. Additional Related Models: Cable Holder/Bushing for…
I have designed the screw holes to fit a M3 woodscrew. The bracket/support is 100mm in length on both axis. Feel free to scale up for larger brackets! Happy Halloween (soon!)
Benchy but flipped for left handed people (JOKE)
Simple flip of the model https://www.prusaprinters.org/prints/31452-wyze-cam-prusa-mount-with-slide-in-connector so it works on the left side of the printer rather than the right. Print instructions printed with supports. 20% infill. 4…
A mirrored version of the 4 inch spiral gear included with Sam's Gears, so that the spiral goes the opposite direction. Print instructions Category: Mechanical Toys Instructions Print and use with Sam's Gears!…
For ender users use “Motor_PlateMirror_Ender_3” instead of “VORON_M4_Assembly parts - Motor Plate mirror” Manuals are from VORON Design
Really liked the size and makup of aroo 's chainlinks for the Ender-3. But I needed them to be miroored along the z-Axis to be mounted 90° rotated and open to the same side, so I tried my best to remix his design.
After installing the manta ray bed from hex-zero, I noticed that my slideswipe dock that attaches to the y extrusion won't fit anymore. To combat this issue I mirrored the entire assembly to allow mounting it towards the back of the…
Mirrored it to offset the fan to the opposite side to fit my dell 7050. Uses 40mm fans, for fan grill lock at original.
All holders mirrored so that the 'pins' of the SD cards are not exposed.
This model is a remix of "Maximally constrained Z-belt covers" (which is also a remix). It is just a mirrored model (for using it on the front-right & rear-left belts), in which the Voron logo appears with the right orientation instead of…
Now with MIRRORED orientation so the contacts of the battery are covered. See description.
Upgrade you Trinus with E3D's Mirrored Titan Aero ! Use the complete range of E3D Heater Blocks & Nozzles | http://e3d-online.com/ Print with your favourite thermoplastic | http://e3d-online.com/All-Filament You'll need to replace the…
Needed the phone charger on the other side due to where I sleep on the bed. Decided to remix the legs while I was at it. Uses 2 screw and I added little rubber cupboard door bumpers to the legs for traction. Requires: 2ea M4x12mm screws.
This is a mirrored version from the model from @m3_mantimaker_420166 model.
Rack Shelf for CRS305-1G-4S+IN but shortened to save fillament, and mirrored to show the status lights better.
Mirror version so fit on other side of impact properly. All credit goes towards Ira S for the great model.
This is a 3D model of the side brackets found on the official Creality Ender 3 light bar upgrade kit. I designed this for three reasons: The original plastic mounts are prone to cracking, especially under tight screw tension. The original…
A 10mm deep 40mm case fan to cool two slots on the TPi2 cluster board, for the non-micro SD side of the CM4 adapters.
Mirrored Buddha head. Scan from wooden statue
A simple, mirrored version of the original Firewall provided by Flitetest for people who don't know how or don't want to mirror the original STL in their slicer, Fusion 360 etc. Basically allows the wiring to come through on the opposite…
A detailed Tyrannosaurus rex skull, shrunk down to an earring charm with a jump-ring loop fused onto the top of the cranium above the centre of mass, so the skull hangs level with its profile facing forward. Ships as a mirrored pair so…
Right side filament guide for the Official Prusa Enclosure. Simply mirrored the existing parts in Fusion360 - nothing fancy!
My extruder crashes into the original model, so I mirrored it so the bracket holds the camera far enough away from the build zone to avoid said crashing. Nothin' crazy here. Hang the webcam upside down, zip-tie it so it doesn't unfold,…
Took Andrew's design for the Shark Rocket wall mount and mirrored it to better suit my mounting location
This prop wont break any flight time records, but it sure sounds AMAZING! This will only work with the mirrored handle print. Thanks to the original designer for this!
I needed a poop bucket that I could access from the left side, so I slightly modified this model. The screw mount doesn't align with anything correctly anymore, but I didn't need it to anyway, I glued it to the housing with some…
The internal Y rail mount by MishaT is great, but if you have a Lulzbot AO-10x series, the existing wiring for the motor is too short to run the motor on that side of the rail. So, this is simply a mirrored version. I claim no rights to…
As requested by @Mike_2205479 REMIX (lid solid, no TFT mount hole) of LowRider 3 CNC - control box case for Raspberry Pi 4b, BTT SKR Pro 1.2 board, and BTT TFT35 E3 touchscreen (v1.3.6) MIRRORED! Please note this is the mirrored version.…
THIS IS A WORK AND PROGRESS, FURTHER DOCUMENTATION WILL FOLLOW NEXT STEPS: 1. Find a new off-the-shelf potentiometer or design my own PCB to handle it. Background: I was quite impressed with the usability of the solder fume extractor by…
I needed a mirrored extruder for my redesigned printhead of the Kingroon KLP1 210. So, once found the Sherpa micro, i mirrored. Also, the arm used to break when installing the gear, so decided to modified to make it stronger and easy to…
Basically the same "Camera mount for Logitech C270 webcam by jclarkhughes published Jan 30, 2017". Just used a mirrored STL file. I just needed the camera on the opposite side, looking left on the right side of my Tevo Tornado because my…
Remixed version of Legend's Ender 3 Nozzle Wipe Attachment. Also modified so the brush should only protrude about 2mm above the build plate to minimize issues with nozzle offsets to probes during bed leveling and meshing. Print with PETG…
A mirrored version of my safer chamber heater, fan fits correctly. Allows side by side stacking. Perfect for DIY printer projects. Created per community request. Fully remapped back cover plate, half the original size. Printed with…
mirror the STL to get 7700848790
A simple design that is an optical illusion. Do you see a "W", "heart" or a "S"? Designed to print without supports. Please "like" this file if you collect or download it. Category: Sculptures
I find it easier to mount board on the other side of the axis that has X-axis motor – that gives more options for modding, so I designed holder for the PSU I have to be on the other side of the printer. Mirrored PSU cover for 24v 360W…
hole = 21,5mm and it is tall 25mm
V2! (V1 is still included as Mirror_Carriage_2) This is a mount for the Titan Aero extruder/hotend that fits the Plus. The mount can work with either the original motor or a small 26mm pancake stepper like this one. (Though you will lose…
Simple mirrowed PSU Holder, for my Fake PSU Electronics Housing
printed it in PTEG on Bambu P1S with 0.20/strength profile with PTEG support there are several parts. the side without and with cutout for the tiny cable canal with 90° angle which fits to a bigger canal on top of the big Hager piece
This remix is a work-in-progress.
I love the original make but ran into a few issues while printing it that frankly baffled me. First is the hollow pieces. After following the provided instructions with no infill for a test piece I decided to try printing with infill.…
Duender Front mounts for 4040 Extrusions (Mirrored Remix). My Linear Rails are on the outside of the 4040 Extrusion so i mirrored the original stl to accommodate for this.
"Just... stay there... perfect!" — Baermar Category: 3D Printing
For my FF Dreamer I needed a sock for the right and a sock for the left hotend which are mirrored. The wedged slots in the socks were not needed for my hotends. So I made a remix without the slots and with a mirrored version. The original…
This is a remix of the mirrored Paint Bottle Holder 32.6mm short version by DeGnoss The mirrored versions of the bottom parts were missing the ridge where the top part can slot in. For now I only fixed the 3x2 mirrored bottom model. Image…
Sometimes the claw push rod for the servo doesn't fully fit and it scrapes against the servo (in this case the MG90s servo). So I tested it with the pushrod mirrored and this worked. So it doesn't scrape anymore.
![[ REMIX ] Original Prusa Enclosure toolholder (LED stripe compatible, mirrored)](https://media.printables.com/media/prints/554974/images/4457989_f96586f8-1391-49f7-b657-7d8caab999ca/img_2848.jpg)
