Counting matching models…
Disclaimer: This is not a replacement for the original Pro Tank Ring from SW-MOTECH and should not be used on a motorcycle! The design is retraced from the original SW-MOTECH Pro Tank Ring . The screws for mounting the ring to a wall are…
Edit: 7th of August 2023 :BEWARE - bag comes loose in upwards twisting motion. Needs revision. This ring connects SW-Motech bags to Honda motorcycle fuel tanks. It's mechanically connected to the bag and does not contain a magnet. I've…
I printed mine using PETg material with changing the filament during printing without the use of supports (you need to rotate the model :) ) there are three versions: old VW GOLF R logo new VW GOLF R logo without any logo
Used to mount Motec C127 dash onto the car's interior
Holder with hole for screw or you can tape it. If you like it and want to donate (paypal): [email protected] :)
When I get off the motorcycle I, of course, carry the tank bag containing the wallet, phone, glasses,… with me. But it's incovenient to have to carry it in the hand when, e.g., going into a shop. So I designed an adapter to which a ring,…
For some reason every motorcycle manufacturer has different fuel tank covers, even changing them per model year, or - in this case - put plastics around the tank ring so that a special item needs to be bought. I have standardised on SW…
Thrust Tube to fit 50mm WeMoTec EDF unit Print Settings Printer Brand: Ultimaker Printer: Ultimaker 2 Rafts: No Supports: No Resolution: 0.4 Notes: Extruder Temp 205 Bed Temp 60 How I Designed This Category: Vehicles
Adapter for SW Motech PRO tank ring system to BMW S1000XR 2020+ top-case holder. You need to buy a BMW S1000XR SW-Motech tank ring separately, this is a top-case holder adapter only. Thread inserts are M5+M4 KVT Microbarb Print…
This is a clone of the MOLLE adapter for the SW-Motech T-Lock holder ( https://sw-motech.us/products/luggage/tank+bags/accessories/4052572185681.htm ). It will allow you to attach any MOLLE bag to the holder.
i had troble whit fitting en this was my solution raiser +13mm
This model is a replica of the upper part of the SW-MOTECH ION series tank bag mount. I designed it because I didn’t want to keep detaching the original mount from the bag every time. Since I occasionally film from my motorcycle using a…
I used support for the big hole on the bottom, but used a support blocker for the smaller hole, since removal would be very difficult. Printed in PC blend, probably PETG would be fine as well.
This is a stand for a remotecontrol from Telenet TVbox (Belgium). The same boxes are also used by other countries.
This key fits on the square of the water refill valve on a Vaillant gas boiler atmoTEC Plus. Makes opening and closing the refill valve easier without the need for pliers or wrenches. Print Settings Printer Brand: Prusa Printer: I3 MK3S…
i wanted to change my pro ring mount on my tenere 700 to an evo ring, since swmotech doesnt provide that for my bike. So i remixed this and it worked out great in ASA.
Print two normal and one locking pin per bag. Use the template to figure out where to mount them with countersunk screws. I printed all parts in PLA+ with 100% infill. So far they are holding up. Thanks to @Robin for the pins and spacing.
20mm spacer for wall mounting SW Motech Pro tank bags with a recess like the Pro City. I have not printed or tried this yet but I plan to update when I do.
10mm (parametric) more thickness for your tank wall holder!
PC-Fernbedienung / PC-Remote Diese Fernbedienung ist für alle gedacht, die Ihren Computer noch irgendwo unter dem Tich stehen haben. / For PC's under your Desk Funktion/Function: bringt den Power- & Resetschalter, PowerLED und HDD-LED in…
Tisknuto z PLA na artillery sidewinder x3 pro. Bez podpor. Použil jsem Brim 4mm
This tank ring adapter allows you to mount a tank bag (SW-MOTECH Pro ring) on the Yamaha XSR700. On this bike, the fuel cap sits very far forward, close to the handlebars, which makes the standard SW-MOTECH tank ring position problematic…
It is still an ongoing project.
model tisknut na tryska 0,4, vrstva 0,10 PETG 60% výplň odkaz na model
I wanted to tidy up the installation of my after market indivcators (M8 size). My new saddel bags came with a bracket to move the indicators but it wasnt pretty, so these fit in the yamaha indicator sized slots. Printing: Ideally ASA fort…
I needed a nice plate to cover my electrical outlet hole left after removing the default switch. Since the holes of the Remotec mount do not match, I needed a solution. So I quickly designed this really simple cover plate in Fusion360.…
Wall holder for the Novoferm 302/304 remote. Remote sits very secure. Filament: PLA Printer: Ender Creality 3 V3 SE
Wall plate to hang Sw Motech bag, can be mounted with 3 wood or wall screws Printed in PLA
It's a wallholder for 3 remotecontrolls. two bigger ones on the back side an on the front a smaller one for an AppleTV Siri Remote. Hole sizes: 52mm x 26mm 38mm x 12 mm
My Dad tipped his bike over and the original mounts for his top case broke, so I modeled up a replacement in Freecad. Will fit SW Motech Adventure Trax ADV hard case top box. I added the CAD model if anybody needs to modify it, although I…
Object in blue has been printed with PLA, the one mounted on motorbike is printed in ASA. You'll need 4x M3 spacers and 4x M3x10mm screws, 2 to replace the original philips, and 2 to complete the pattern (not mounted on the PLA model in…
Got this USB Microscope for Christmas. I tend to alway loose these kind of remote controls. So i designed a clip to attach it to the Monitor. Hopfully i won't loose this remote control now. Designed in OpenScad, file is included.
The feet of my Primotecq RAC4 (raclette oven) had started falling apart (cracks everywhere). Instead of buying a new raclette oven I decided to print new feet. The holes on the PiedFourRacletteBouton are for: for the temperature button…
I used OpenAI Codex to build a mounting plate in SCAD for a Wehooper4 SolarXiao and 2x2 4P 1S 21700 battery pack that fits in a 7.4" x 4.7" LeMotech Aluminum Junction Box. The mounting holes for the SolarXiao board were taken from an…
support mural pour télécommande wall mount for remote control
Keep CONTROL! Drink and Remote in the same place.
This is a simple and unadorned block and remote control holder for the wall. It was attached, using double-sided tape.
This 3D model represents a custom mounting bracket designed for use with a soft luggage setup on SW-Motech-style side carriers. The original bag model is unknown, and compatibility with specific bags is not guaranteed . The bracket has…
This is pretty niche but hope it helps someone: The SW Motech "Blaze" pannier brackets don't fit well on the 2024+ Street Triple 765 passenger brackets. These wedges improve the mount fit quite a bit so they don't shift around. Print in…
My Dad tipped his bike over and the original mounts for his top case broke, so I modeled up a replacement in Freecad. Will fit SW Motech Adventure Trax ADV hard case top box. I added the CAD model if anybody needs to modify it, although I…
I used OpenAI Codex to build a mounting plate in SCAD for a Wehooper4 SolarXiao and 2x2 4P 1S 21700 battery pack that fits in a 7.4" x 4.7" LeMotech Aluminum Junction Box. The mounting holes for the SolarXiao board were taken from an…
10mm (parametric) more thickness for your tank wall holder!
This 3D model represents a custom mounting bracket designed for use with a soft luggage setup on SW-Motech-style side carriers. The original bag model is unknown, and compatibility with specific bags is not guaranteed . The bracket has…
Needed a way to mount a Z-wave remote to a wall, used 3m strips. Category: DIY
This key fits on the square of the water refill valve ("KFE tap", pictures see on parent thing) on a Vaillant gas boiler atmoTEC Plus. Makes opening and closing the refill valve easier without the need for pliers or wrenches.
The sticky labels that came with the remote are: By far too small and the once you need are not there :-( …and I can not always remember which button does what :-) I could not find any other solution, so here is my idea. Prints with out…
Popis Žáci na základě probraných chemických prvků vytvoří destičku se značkou a názvem chemického prvků ve tvaru puzzle. Při tisku používáme oranžový filament - pro nekovy, Šedivý filament pro kovy.
Holder for a Remotec ZRC-90 Scene Master using two slots of a Feller EDIZIOdue style switch. Printed in PETG-V0 You need two screws M3*10 and two hot melt inset nuts The holder is very slim and doesn't need a hole in the wall. The one I…
