Counting matching models…
Perimeters: 3mm height, 15cm wide, 20cm height optimal print: no auto color change, manual color change to 2,20mm bottom half: TPU or Prusa Flex top half: any solid non flexible (can also be printed with flexible, depends on preference)…
🖱🔥 Upgrade your gaming setup with a mouse pad that looks like it came straight out of a high-end motherboard! This detailed two-color FDM model combines a technical motherboard layout, raised linework, a central ROG-inspired emblem, and a…
Mousepad with wrist rest This one is designed in FreeCAD and the spiders are added as SVG modifiers in PrusaSlicer. You can exchange them and create your own design. The infill is set to 5% gyroid to make the wrist rest comfortable.…
My goal was to create a mousepad that fully supported my arm while sitting on the couch. A shorter design would cut of circulation in the wrist or mid-forearm. It is 450 x 220mm or 17 3/4 x 8 5/8 inches. The joints are deliberately tight…
Its designed to be placed over a 4040 or 8040 extrusion and bolted on with 2 M8 screws. Feel free to ask any questions if theres something unclear.
I designed this mousepad mount to easily attach to my Monstertech frame, making my mouse accessible during VR flight sims. It mounts using two M8 30mm bolts and the self-aligning T-nuts from Monstertech. You can find the T-nuts here and…
Mousepad that fits the Playseat Trophy Gearshift and Handbrake extension. It is made for max stability and snuggles right under the extension plate. I made it so I can still fit a Fanatec Gearshifter and a Moza Handbrake, re-using the two…
Simple oblique 18x18 cm plate for a more relax mouse pad experience. Scalable, no supports needed. My desk has some problems so I designed and printed this and now I have a less fatiqued wrist. you can use it in any direction you need,…
Revolutionize Your Workspace with Our 3D-Printed Mousepad! ✨ Ergonomic Design Say goodbye to wrist strain! Our integrated hand/wrist rest is designed to support your wrist comfortably during long hours of work or gaming. 💼 Perfect for All…
Needing to work from the couch for a bit, I wanted to continue using a mouse instead of a trackpad. Should fit modern series 6 Lovesac standard sides and be relatively compatible with any generic mousepad around 20 cm x 23 cm. Uses about…
I have a cockpit, but no where to really use my mouse that is stable, thus using the mounting screws on the top of my bravo, I made this print. I opted to double stick tape a rigid mouse pad on top of this, since i had it, but it should…
Made a mousepad in the style of the smooth pei of the prusa core one, hope you like it. Print Settings: Layerheight: 0.2mm Layerheight Wallgenerator: Arachne Print on textured print sheet.
Having a monstertech mount and low funds, I decided to design my own mousepad mounts. It is made to be rigid and quickly disassembled to be stored away. The assembly is made, for each side, from 4 parts : A T slot rail, A “fixer” which…
El raton que sale en las imagenes es del que puedes imprimir directamente desde tu impresora, es este https://eu.store.bambulab.com/products/wireless-mouse-components-kit-002?_pos=1&_sid=21fb121ca&_ss=r&variant=53643355324764 Uso esta…
Printed on Biqu Glacier with Bambu H2D. — Print settings Infill: 100% rectilinear Infill direction: Check screenshots. I printed with the lines going 180 (left to right). Top to bottom should be fine. I don't think the default 45deg will…
material: TPU (transparent green) nozzle temp:235°c bed temp: 30°c infill: 15% infill type: Cubic
My Peloton Bike+ touchscreen is having issues, so I designed this small mousepad that attaches with zip ties. It works perfectly and is very secure. Printed on a Prusa Mini with only buildplate supports.
Simple, minimalist low profile (3mm) mouse pad that you can assemble using any fabric (I used an old bed sheet). Files includes a pad and mounting fasteners with several different fabric thickness tolerances (from 0.1mm to 0.6mm). I…
Habe das Mauspad gebaut das ich gerade keine Hangschaltung auf dem Halter habe und so kann man es gut dafür benutzen. Es hält direkt, muss nicht geklebt werden. Drucken geht easy natürlich ohne Supports.
Upside down drucken. Auf PEI unbedingt Klebestick drunter oder auf strukturiertem Metallblech dann wird es aber nicht so glatt. Mit Tempo 40 ca. 6h. Viel Spaß.
well it holds your folded mouse pad as i said some of you might want it idk
This is a simple but effective base extension for the Logitech PowerPlay 2 system, designed for users who use large mousepads and want a completely flat surface without the annoying step created by the original Logitech pad. I made this…
Mousepad with wrist rest This one is designed in FreeCAD and the spiders are added as SVG modifiers in PrusaSlicer. You can exchange them and create your own design. The infill is set to 5% gyroid to make the wrist rest comfortable.…
My goal was to create a mousepad that fully supported my arm while sitting on the couch. A shorter design would cut of circulation in the wrist or mid-forearm. It is 450 x 220mm or 17 3/4 x 8 5/8 inches. The joints are deliberately tight…
General info This case is meant to store a mousepad, papers, cylindrical or rollable objects. I was carrying around a mousepad for a laptop in my bag and got worried that it would be damaged, so I made this model put my worries to rest.…
Sturdy 8020 Sim Rig Mousepad Solid, stable mousepad. Can be used with or without a cloth mousepad. Print photo is using a Carbon Fiber effect plate, a textured plate may work but I have not tested. Recommend a smooth or mostly smooth…
I have a very slippery desk and my mousepads always move around. My mousepad is Steelseries QCK but it should work with most of the 2mm ones. Simply print in the color of your choice, clip them on, and use double-sided tape, or something…
This is my first Fusion 360 model: clips to connect my keyboard's braided USB-C cable to the top edge of my mousepad.
DIY RGB mousepad using WS2812B addressable LED strips and a microcontroller. It prints in two halves, you can use LePage Ultra Gel Control Super Glue to bond the two halves or just melt the joint together after aligning. I've also read…
This is a Mousepad version of the Bambulab X1 and P1P Printsheets. Prints within 1 hour and 6 minutes with a 0.4mm nozzle on the X1-Carbon You will have to print WITH AMS system bacause its 2 colored. You will have to DEACTIVATE…
I scaled up the original mousepad plate to the maximum possible size of BambuLab print plate. The other parts have the original size with a reduced z height, so that the top layers are closed with a single color. Print without filament…
A simple mousepad which can be attached to one of the arms of the IKEA Matchspel gaming chair. I use it when gaming in front of my TV where there's no desk available. The mousepad attachment simply slides over the arm of the chair. It can…
Print the three parts and superglue them. The lower base TPU prevents the mousepad from slipping, while the wristpad feels soft to support the wrist. I printed the mid-section in 2 different colors, but it is not necessary. Enjoy!
There are also DIY variants that place the Powerplay mouse pad on top. But with the Razer XXL mouse pad, the mouse in the lower area would not be charged. With the side arrangement, however, it always works. I actually wanted to add…
As a field technician, I spent a lot of time in my truck working on my computer and hated using the trackpad. When I grabbed a mouse, I would end up pulling my shoulder in to use the center console on my truck. This design allows you to…
I recently got a glass mousepad and would like to swap back and fourth between cloth and glass. My cloth pad is an XL artisan variant, and with it being long, i made an additional “balancing” ring so the rolled up mousepad dont fall out…
Its designed to be placed over a 4040 or 8040 extrusion and bolted on with 2 M8 screws. Feel free to ask any questions if theres something unclear.
I recommend printing 6 - 10 of them depending on the size of the mousepad.
Joey Mousepad from Futurama! If you guys enjoy the model please like and follow for more!
