Tube Case for a Mousepad, Paper, etc
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This tube acts as a simple carry case for a mousepad, paper or other cylindrical or rollable objects.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 22
- Makes
- 0
- Views
- 94
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Share Alike
General info
This case is meant to store a mousepad, papers, cylindrical or rollable objects.
I was carrying around a mousepad for a laptop in my bag and got worried that it would be damaged, so I made this model put my worries to rest.
The case also perfectly fit rolled up A4 papers.
Potential issues
The model has a threaded lid that snaps on at its end position. The end position features some geometry that should allow the lid to snap in place to align the pattern on the outside perfectly. The geometry in the lid is tiny and may cause some issues if your printer is not tuned to very small tolerances. I however, did not have any issues with this.
Dimensions
The interior is designed to fit an object with the diameter of 35mm and a height of 230mm. Please view the image bellow for more detailed measurements.
Print settings
These are my recommendations but please try to experiment as you wish.
Nozzle | 0.4mm |
Filament | PETG |
Supports | None |
Infill | 20% |