Counting matching models…
Designed for Printables Flash Contest #101, this finger skateboard I designed features real rolling wheels to give you that tactile feeling. Tried my best to design it without need for supports, but the wheels that do not contact the…
Print approx. €0.69–€0.84 excl. taxPreliminary estimate for one variant
EccentricToast's model is amazing, but it didn't have enough sections, so I simply added a divider down the middle. I also included the original .3mf's for convenience, and both a .3mf and a .stl for the bottom. Blank top with no logo…
This is a snap together, easy to print and customise moveable figure. A lot of time has gone into the design of the snap together joints and print orientation to make these files as easy to customise and print as possible. The goal of…
There's a few included files to let you print how you want to. The fenders should just snap on, although you can glue them to make them permanent. I used an M2 screw as the axle for the wheels, it needs to be at least 10mm long if memory…
Hi there, here is my design of a piston/connecting rod assembly based on a Subaru EJ20 STI motor. These parts were designed through the Onshape CAD software. Printing Instructions: 0.12/0.2mm layer height depending on your desired detail.…
You decide where to mount, bottom or top
I've having a hard time breaking free the removable command strip mounts from @Marcus_543412 (Can't break free at all even after completely destroying it). But I really need this design as it become impossible to remove the command strip…
Printing : Print 1x main body and left/right side. Print 2x side clip for each additional layer. Print 4x strap per layer (works for me) No supports. .2mm layer height Quality defaults How to use Determine how many levels you will need by…
Thanks to the Fairphone 3 Dummy of @Tig3rch3n I've made a bike mount. The upper part is removeable so maybe someone could adjust the clamp for other bikes or create a car mount or a desk stand. The lower part is fixable with cable ties,…
I made this for my CR6-SE so I could put all the skirts, purge lines and filament scraps in - so I don't have to go to a bin every time. The base slides into the 2 slots in the 40mm x 40mm extrusion on the base of the printer. 10 holes (5…
This is the second themed version of my original moveable figure . The figure reuses a lot of the parts from the original model with only the head and legs being different. To avoid duplicate models I have only included the different STLs…
A Playdate dummy used for prototyping accessories and mods, and to get a feel of the size of the console. The main idea was to have a 3D printed version as close to the real device as possible. It uses real M3x6mm fasteners (screws) to…
This is a simple circle planter that has a built-in water tray in case of overwatering. Customizing Instructions: I designed this planter to be customized, using Tinkercad. Below is a detailed guide to adding text if you don't know how…
Some removeable Containers for the Hsw. More are following.
This is a removeable wall shelf with no visible screws, You can Slide the entire shelf and remove it if not needed. only the attachments will be stuck on the wall which don't look so bad. (Working something else to attach to those) Use 4x…
Designed for the PVC base on the Uncommon Telescoping Flagpole: https://www.uncommonflagpoles.com/flagpoles/the-original-telescoping-flagpole/ Designed to be printed upside-down without needing supports. I recommend printing in PTEG or…
With this Container you can remove the silica gel very easy to dry it. You just need 2xM3 bolts that screw directly into the plastic. The length should be anywhere between 5 and 30mm i recommend 8mm.
I printed it in PETG-Lite and mounted it with Tesa Powerstripts. Provided models are for Elmex toothpaste (29mm for kids and adults toothpaste) and 60 and 70 mm diameter cups. Customizeable due to openscad. This one is "quick&dirty" so…
I wanted to have more dice types to fit in the trays, so I made it with hexagons
so i saw this thing on instagram about robotic eyes tracking motion and thought why not just figure out the mechanism myself from scratch. this is my take on it, basically you move the rod sticking out and the eyes do the opposite, push…
Hallo zusammen, heute gibt es einen beweglichen Winkel der in einem Stück gedruckt werden kann. Nach dem Druck etwas hin und her bewegen, danach ist er völlig freigängig. Keine Supports notwendig. Augenmerk lag hierbei das Teil in einem…
This sleeve was designed to fit 2- 80mm x 40mm x 15mm mini HEPA filters . The circular output is currently designed to go around a 120mm input. If needed a can adjust the output to fit any size. Model must use supports in the position…
It's an Adaptor for this A-Pillar-Mount: https://www.twizy-forum.de/3d-druck/82990-3d-druck-universal-halter-fuer-die-a-saeule?start=150#168884 I use it, to mount the display of the dashcam in my Twizy. TinkerCAD-Link:…
Meet the Shardscale Dragon, a beautifully detailed fantasy creature covered in countless shard-like scales and sculpted with great attention to detail. The layered scales, expressive eyes, and prominent spikes give the dragon a unique and…
With this Container you can remove the silica gel very easy to dry it. You just need 2xM3 bolts that screw directly into the plastic. The length should be anywhere between 5 and 30mm i recommend 8mm.
This is the first themed version of my original moveable figure that I hope reaches you in enough time to get printed for Halloween. The figure reuses a lot of the parts from the original model with only the body, hips and legs being…
FULLY MOVEABLE KUKA KR10 INDUSTRIAL ROBOT Consists of 7 separate parts. A great thing to understand the movements of the robotic arm. Each part contains holes for the protrusions of the adjacent part. this design was made by Yokata, the…
Dieses Modell ist über Gelenke beweglich und in einem zu drucken. This model is movable via joints and print in palce. Material: PLA+ Druckereinstellung: Layerhöhe 0,2 mm / Infill 10 % / Support No Kein zusätzliches Material erforderlich…
Roller skates with moveable wheels (Print In Place). Fun little toy that I made to give away to some roller derby friends of mine. Print upright with tree supports.
top mounted filament holder for flash forge AD5m PRO mounts to front right corner with lid down. Lay on side with flat bottom of roller use supports and paint in to the hexagons as well to the flat spot on the roller
Because of the strong winds during winter here, the cold air gets pushed to the inside of the QIDI Q1 Pro enclosure if I have the exhaust system (by Igor R.) attached. Since his duct adapter is removeable, I added this back cover port…
If you need to vary the size of the removable cups, you can print them out yourself. In the files you will find 3 different sizes. For each size there are variants of the division (horizontally or lengthwise, as well as halved or…
Uploading this at night but will have more pictures for it in the morning
I hate having doors open and in the way, this mod adds lower hinges that unlatch allowing doors to be removed. when installed simply lift the pin to remove the door!!! Print 1 hinge, 1 mirror of the hinge, and 2 pins. You will need 4 3mm…
Discover my innovative shopping trolley chip! This smart chip unlocks your trolley effortlessly and can be removed immediately after use. Practical and reusable, it significantly improves your shopping experience. Get this chip now and…
It's an Adaptor for this A-Pillar-Mount: https://www.twizy-forum.de/3d-druck/82990-3d-druck-universal-halter-fuer-die-a-saeule?start=150#168884 I use it, to mount the display of the dashcam in my Twizy. TinkerCAD-Link:…
*****Version 2 now ready.**** Redesigned to be stronger, uses nuts and bolts to join middle pieces. 8x m4 nuts 8x m4x12 screws Moved my CFS unit to underneath the printer, the printer is on top of the popular Ikea lack table. My…
This is a remix of the head of @CalsTechConcepts's Symbiote Moveable Figure designed for single-color printers. It is an alternative solution to the options presented for single-color printing in the description of the original file.…
:IMPORTANT THREAD / BOLT INFO: I had to scale the clamp bolts up in size about 1-2% and the bolts for the base about 3-5%. That's what worked for me and FOR MY LIKING - everybody's setup is different, your mileage will vary, everything…
This is a dice tower for all dice playing board games. The gate can be lifted up so the dices do not roll on the table. No support structure needed when printing, however, requires a calibrated printer. Update 25-09-2017: New version…
A stamp with moveable types with 3x10 spaces. PLA works ok with paint, for ink you may need to print the letters with a softer material like TPU instead of PLA. Depending on the printer resolution it may need scaling for the letters to be…
Moveable 3030b construction profile mount i build for my G1000 mounts on my desk. For stability i print it with 50% infill from PETG. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: Doesn't Matter Supports: Yes Resolution:…
this it is a moveable phone camera which can move in any direction you want it to move. can come in the iphone 20 maybe
SOVOL ZERO MOD 270° Hinge, easily removeable, no additional screws or supports required. Feedback would be appreciated. WHAT IS IT? I think ALL printers should have 270 degree hinges. Especially those with glass doors. If it isn't against…
Removed the logo from the v2 bottom bracket.
Remix of: https://www.thingiverse.com/thing:2808264
Stifte Box mit integriertem Scharnier. Bewegbar auf einmal gedruckt. Mit nicht zusammengebaut werden, beim ersten Bewegen vorsichtig drehen, danach einfach drehbar. keine Stützelemente zum Drucken notwendig
“Deluxe” Expansion for @CalsTechConcepts ' Symbiote moveable figure design consisting of a neck piece, arm holder, and four alien arms. Huge shoutout to them for their super fun, dynamic moveable figures that spark some serious joy - make…
Hey, due to quarantine I had time to start my first design in Fusion 360 and decided to design a botlle holder which can be printed supportless. The twist on it is, that you can simply print a bottle holder and a variety of different…
I have made yet another remix for the command strip + locking snap mount. This time for large 3M command strip. I have re-made this model from scratch using the original locking snap in the open-grid models. The large command strip is…
prints under 4 min. you can use PLA, PETG, ASA
Made this out of TPU so I didn't have to order a new mouthpiece. Fits perfectly and snug without any magnets. Printed with about 65% infill and 4-5 wall loops for rigidity.
The official assembly instructions make you solder the battery directly to the PCB. This wasn't ideal in my opinion so I designed a little thingamajig that lets you connect the battery via the original terminals. It also has the upside…
Meet the Shardscale Dragon, a beautifully detailed fantasy creature covered in countless shard-like scales and sculpted with great attention to detail. The layered scales, expressive eyes, and prominent spikes give the dragon a unique and…
Create your very own giant moveable LEGO style figure Each figure stands at approximately 16.5 cm, that's four times the size of a regular figure. All parts are designed to clip tightly together and we advise that you do not attempt to…
I re-designed this table in FreeCAD to have removable legs. This way you can print them separately with orientation and material optimized for strength. You can also replace one if it breaks. I also tapered the groves in the table top to…
This is a simple bracket designed to be removeable that has a working load of 20+lbs. I made this to use with another project i am working on and in testing it i found it to be quite strong so i figured i would upload it in hopes someone…
This model lets you reuse the LDO Voron 2.4 Kit Z-Endstop PCB. Because of the extra depth that the Stealtchanger Shuttle adds to the toolhead I decided to just use the Z-Stop when i need to and not loose any Y-travel. To fix it to the…
Hierbei geht es eigentlich weniger um ein 3D-Modell als vielmehr um ein kleines Projekt: Drucker-Gehäuse/-Schrank für MK3S (+) Das Gehäuse ist dafür ausgelegt, noch zusätzlich auch eine MMU installieren zu können. Maße des Schranks: ca.…
The original model was available thanks to the University of Dundee Museum Collections. Original scan available here with CC0 Public Domain license: https://sketchfab.com/3d-models/brown-bear-skull-e01dc94d20df4b888c7a6979bffb45a9 This…
Initially, I just wanted to upgrade my 40mm Fan + Fang Combo but it grew into a whole new X Carriage system for the FLSUN I3 Original. Hope you find it useful. You'll need to use supports and I recommend printing with PETG. Requirements…
I wanted to make a heart key chain for my wife which is moveable in itself. Now here he is Print Settings Printer Brand: RepRap Printer: RepRap Kossel XL Rafts: No Supports: No Resolution: 0,2 Infill: 15% Category: Keychains
The idea was to create a set of models which would make it easy for someone with zero woodworking skills to quickly, easily, and cheaply build a partition or even a full wall inside a room or apartment without drilling any holes in the…
Android "Droid" robot box with moveable arms Vers.2 now easier to print on 1 plate, plus updated the thickness of the lids shell to be a bit more resilient to last a bit o daily use Print Settings Printer Brand: Creality Printer: Ender 3…
No supports should be needed! This is a remix of this design over on thingiverse: https://www.thingiverse.com/thing:2542369 I added a spot on the back for an 18mm magnet. It's a tight squeeze so you probably won't even need glue. Any…
No supports needed! Trunk only moves a little bit and could drastically be improved but I'm still new at this design stuff so any advice on how to improve it would be awesome. This is a remix but I can't find the original design on…
This is a toothbrush holder that mounts to a wall or other surface.. It is removeable from its base so it can be cleaned.
Beweglicher Haken / moveable hook für verschiedene Dinge zu verwenden / to use for different things. Mein erster “Print in Place” / My first “print in place” The photos showing first draft print….
Customize it with openSCAD. Experimented with the awesome openSCAD lib Round-Anything from Kurt Hutten. Print it face down with manual color change.
Simple print to replace outdoor faucet tap handle. Fits square male end 8 x 8mm with 0.6mm tolerance added. Scale x/y to make the square smaller or bigger for your tap. Print Settings Setting Walls 4 Layer Height 0.2mm Nozzle 0.4mm…
mini LED twin spot suitable for LED 5 mm Reflektor
mini LED single spot suitable for LED 5 mm reflector
This file should print in place well if your settings are fine-tuned. Quarter file included for a 3d printed coin chip to play. Use supports and they should break away when the legs are turned. If supports are not used, the legs will be…
see also the singel and twin version
My version of R2D2 with moving legs, head, and retractable center leg. I may try to do more detail work on the skin in the future, but I'm not very good with that stuff yet. Inspired by someone's version with wheels and moving head, but I…
Model je remixovaný z https://www.thingiverse.com/thing:4662776 a inspirovaný tímto https://www.printables.com/cs/model/130479-kryten-2x4b-coin-bank Popis: Tisknuto na Prusa Mini - vrstva 0,15. Materiál Aurapol tělová barva. Kompletně bez…
Printquality dosn't really matter, stronger with thiner layer height.
Bonjour, Je vous propose des lettres mobiles Montessori avec la police de caractère Belle Allure de Jean Boyault https://www.jeanboyault.fr/belle-allure/ avec son autorisation et que je remercie pour son travail. Je l'ai fait à la demande…
Introducing the Ash Catcher, the ultimate solution for easy ash disposal after smoking. This ash catcher features a convenient unscrewable compartment, making cleaning quick and effortless. Its minimalist design makes it a stylish…
I really liked this spoon holder but found it a bit slippery on the worktop. I wanted to put self adhesive feet on it but realised that would cause an issue with washing it, so I made a tray to fit in the bed which could be removed for…
Moveable Joystick perfect to test your printer or just as a fidget on your desk. printed in two colors.
After changing to silicone spacers (instead of springs) my endstop was too high. So I made this part
The Yellow Jaw in the pictures is the Stock Jaw… The Green Jaw is the Printed replacement.
Looking online I found lots of Gloomhaven walls with removeable doors, but none for Frosthaven that model the “snow door” concept. I print this in white PLA with a 0.12mm layer height, 10% infill. Support should not be necessary. Both…
This is my first moveable print! Have fun with it. give the bug lots of attention and show it to your friends :)
removable e track end cap, locks in place with tab that can be pushed down to remove print in petg for flexibility
JUST A THOUGHT I HAD ABOUT HAVING TO HAVE A POUND COIN OR A CHARITY TOKEN EVERY TIME I WENT TO THE SUPERMARKET. NOW I DON'T, I HAVE THIS ON MY KEY RING & WHEN I'VE GOT THE TROLLEY I JUST TURN IT SLIGHTLY LEFT OR RIGHT & OUT IT COMES, THEN…
cheap lens: https://www.zennioptical.com/p/stainless-steel-round-eyeglass-frames-/5500?skuId=550021 Mark the top of the lens before removing it from the frame (CYL). If necessary, secure with instant adhesive against rotation. The glasses…
This is the first themed version of my original moveable figure that I hope reaches you in enough time to get printed for Halloween. The figure reuses a lot of the parts from the original model with only the body, hips and legs being…
this is Mk2 of my ash catcher design, now there's a 90degree & 45Degree models with 3 Different sizes for the ash compartment.
This is still a work in progress and the instructions and model uploads will be made clearer and easier to follow in the future. This is the third themed version of my original moveable figure for all you racing fans out there. The figure…
I made these for my magnets. Problems, yes, try to remove one tray and adjacent magnets want to come with it. The opening on the bottom helps to push the tray up by finger. This helps to better control the magnets with the other hand.…
Box exterior itself is approx 60mm x 60mm x 50mm without lid (approx 70 with lid) The bow and decoration are separate files just in case you only want the box. I deliberately made the lid not flush fitting to make it easier to open. All…
Refer to original model for printing recommendations, installation procedure, and version selection. I used Avery Mini Business Cards - 1 "x 3" 5329 (https://a.co/d/acuTRJT)
This is the fourth themed version of my original moveable figure . The figure reuses a lot of the parts from the original model. To avoid duplicate models I have only included the different STLs in the individual STLs section. I have…
This is the fifth themed version of my original moveable figure . The figure reuses a lot of the parts from the original model. To avoid duplicate models I have only included the different STLs in the individual STLs section. I have…
This is the sixth themed version of my original moveable figure . The figure reuses a lot of the parts from the original model. To avoid duplicate models I have only included the different STLs in the individual STLs section. I have…
