27 models
Everyone claims the Williams and the Snapon are the exact same tool, well unfortunately the original model fit my williams driver perfectly but didn't fit the snap on at all. I added some reliefs so the bit holder can fit into the cap…
A simple stand I made for my Edifier MR4 studio monitors. Angles them up about 10 degrees which helps with the audio quality if you have them below head level. The filament I used in the pictures is Devil Design Galaxy Black
Stand for Edifier MR4 studio monitors. Had to make this model because I wanted the stand that will have better stability
This stand is designed to position your speakers at the ideal height for improving sound clarity. With a sleek and sturdy design, it's not just a stand, but a stylish addition to your desk. Key Features: Optimized height and angle for the…
Introducing a sleek desktop speaker stand, specifically crafted for the Edifier MR4 speakers (Affiliate Amazon Link), though it is versatile enough to accommodate various other models. Printing Specifications: This stand is 3D printed…
The stand fits around the feet of the MR4, I have not tried this stand with any other speakers. Dimmensions included in a screenshot to check fit for other speakers. Infill at or above 15% should be fine.
Speaker Grill for Edifier MR4 Studio Monitor Speakers, 4" I wanted to protect my new EDIFIER speakers but couldn't find a grill for them. As it could not find any other esthetically pleasing way to attach these I just super glued them on…
A simple horizontal Stand for the Edifier MR4 (https://amzn.to/4c5HkHZ). No supports, just simple PLA filament.
This Gridfinity bin is custom fit for the popular Snap-On SSDMR4B screwdriver. It features 8 slots for bit storage and a large finger hole.
Стойки для колонок, можно использовать как горизонтально так и классически вертикально, так же во избежание скольжения по столу, рекомендую к стойкам снизу приклеить силиконовые или резиновые ножки, для этого прилагаю длинные перемычки…
I can't believe nobody has made this yet. In an effort to go 2.5Gbe, I bought an MR46 used on eBay for about $270 (Dec 2023). Price was low due to not having a ceiling bracket. Problem solved. EDIT: Don't print in PLA. Fell off my ceiling…
Due to the short distance I am from my speakers I made an angled speaker stand. There were others who made the same but they didn't have the look I liked. It's on a 8 degree angle positioned at 90 cm from my seating position. I designed…
Hi, I made this stand to bring my Edifiers to the right height, since they’re nearfield, it’s quite important for them to be positioned correctly. The stands are designed in a space-age style to match the rest of my work-in-progress…
Uses 3 standard utility knife blades. Needs 2x M3x20 and 1x M3x25 screws and nuts. Stack the parts in order: a_cover, a, b, c, c_cover. Should be pretty straight forward. Cut the coax, push it in all the way, clamp down, and spin the…
I needed adapter for Merki MR46, had to make some adjustments to model from “ im.jackharvest” adjustments are: first I had extended whole project 1mm on length then added extra length on 2 notches (by adding 2 small blocks to existing…
This LMR400 10mm diameter coax clip is 25.4mm high by 63.5mm long. It allows someone to attach 1 circular piece of coax together with the main loop of a Magnetic Loop Antenna to lower the frequency of the loop. It's just a way to clamp…
A simple wall mount for a Thermacell MR4560.
Designed a dust cover for the front aux ports on the Edifier MR4's
This model is designed for the Edifier MR4 speakers. I wanted to mount them on my sim racing rig made from 40x40 mm and 80x40 mm Item (Type I) aluminum extrusion, but couldn’t find an appropriate solution. With this mount, you can use a…
Descrep supports for the Edifier MR4 speaker set that gives you the option to select from 7 different angles thanks to the little slots in the main support this way you can find the angle best for you.
This is for LMR400 or any Coax line that is 10mm diameter. This cable clip holds one loop of coax about 35mm (1.5 inches) from another loop of coax. It is for a Transmitting Loop Antenna, to add another full loop to lower the frequency of…
Couldn't find any good shelves for my speakers, so decided to design my own. To mount it to the Skadis itself you will need 10 clips in total, you can grab them here:…
This lets you use your existing switches as a mount for the Blindsmart/Zemismart ZMR4 scene controller. You will need to print with supports for the underside, but they come off very cleanly for me. I was going to add space for a command…
https://www.bel-shop.eu/mpps-regulator-pro-napajeni-boileru-z-fotovoltaickych-panelu-stavebnice/
The Blindsmart/Zemismart ZMR4 Zigbee scene controller comes with a mount that will work great if you want to use it as the only device in a single gang box, but if you want to use it with other equipment, in a double, triple or bigger…
Harness cover in the engine bay of some Classic Land Rovers. Hard to find at a reasonable price so just print it instead . I've printed it in PETG. But you could use ASA if you are worried about thermal deformation.
Description This stand is designed to position your speakers at the ideal height for improving sound clarity. With a sleek and sturdy design, it's not just a stand, but a stylish addition to your desk. Key Features: Optimized height and…
