25 models
EDIT ------------------------------------------------------- 2023.08.10. On request from Chris Ondrovic added frame parts without side ventilation (holes only on front side) 2023.03.26. Added STL for Alu profiles caps. Printed from…
Print it as you like. I printed it in Fiberlogy FibreFlex 40D light green as other flex parts for bambulab, because this filament is so nice...
EDIT ------------------------------------------------------- 2023.02.08. Added step files for both covers (side, front), without text, logo, motiv… Feel free and make some nice design for your self.…
FUTURE TASKS Specialized jaws for specific tasks Maybe some kind of fast exchangeable jaws or adapters ------------------------------------------------------- ADD-ONS Connectors jaws great for handling balbulab x1/c/p1p hotend connectors…
EDIT: ------------------------------------------------------- 2023.03.12. New base model for hotends with new silicon sock (sturdy one) ------------------------------------------------------- PRINTING No special requirements, except…
Information for printing and assembly is in my original model: https://www.printables.com/model/383738-parallel-jaw-pliers-sturdy-mrw I'ts great for removing / installing hotend connectors on bambulab printers…
PRINTING No special needs Material : PLA (shell), TPU (hard one like 40D) compartment Nozzle : 0.4 Layer : 0.2 layer Orientaion : shell printed verticaly with brim Supports : none -------------------------------------------------------…
I very much liked the riser design of Marwyn. I wanted some changes though. For instance, I wanted to use a 10mm LED strip instead of the LED ramps Marwyn designed. I also wanted to avoid soldering the strips when installing them. So I…
DESCRIPTION I printed some minuiatures, just for fun / testing 0.2 nozzle :) → and now i need something to help me paint them. I decide create this handle, as starting point of future accessories for painting minis. This have ratcheting…
3D printed part to attach the Rat Rig V-Core 4 IDEX Oozeguards to the MandalaRoseWorks Machined XY Joiners. Uses M3 Slim Nut OR M3 Heat Set Insert to hold the Oozeguards in place. NOTE: The Slim Nut version requires high printer tolerances!
Description Information for printing and assembly is in my original model: https://www.printables.com/model/383738-parallel-jaw-pliers-sturdy-mrw I'ts great for safe manipulating with magnetic base of my painting handle…
The .stl is a starting point , not a destination . Because the Ti tube inside dimensions vary so much, you will probably need to print one, then tune the scale in your slicer to get the outside dimensions to match the inside dimensions of…
Simple breadboard socket for my ESP-32 with Cover plate (bigger pin labels). There are 2 parts to print (i know, there are 3 parts…): Main body + bottom cover (print with 0.4 nozzle) Cover plate with pin labels (print with 0.2 nozzle)…
Snake: https://www.printables.com/model/1054719-oh-its-a-snake-mrweebl-weebls-stuff-badger-badger Mushroom: https://www.printables.com/model/1208960-mushroom-mushroom-mrweebl-weebls-stuff
For the LDO version, insert the print into the U-shaped cutouts on the back of the bed and screw an M3x8 SHCS up from the bottom of the bed. For the MRW version, insert an M3 heatset insert, then insert an M3x8 SHCS into the pictured…
Print Settings Nozzle: 0.4 mm Layer height: 0.15 mm Support: No Avoid crossing perimeters: Yes First layer speed: 10 mm/s Z-offset: −0.05 mm Bed sheet: textured (satin) recommended Notes For Casio MRW-200H . Removing or installing the…
Badger: https://www.printables.com/model/1054537-badger-badger-badger-mrweebl-weebls-stuff Mushroom: https://www.printables.com/model/1208960-mushroom-mushroom-mrweebl-weebls-stuff
Badger: https://www.printables.com/model/1054537-badger-badger-badger-mrweebl-weebls-stuff Snake: https://www.printables.com/model/1054719-oh-its-a-snake-mrweebl-weebls-stuff-badger-badger
FYI - This was only tested on a 300, for 400/500 the position for the hole feeding cables would have to move down with relation to the electronics bay as it stays in the same position on all models. Drag chain used was a 10x15mm.…
Voron Z_endstop when using Mandala Rose Works kinematic bed mounts and UnKlicky
Distance between wheel and chain mount increased to stop it from making contact.
FYI, I do not run IDEX so not sure if this will interfere. Bracket to hold 3x 5015 fans with repurposed splitter from original electronic enclosure. Assembly: M3 screws to bottom of arm, short enough to not interfere with opposing screws.…
This is a remix of Leftcetio's design for mounting the BTT HDMI7 touchscreen on a RatRig V-Core 4. I redesigned the mount to fit on a VCore 4 500 using MRW panels. (50mmx50mm hole pattern) The redesign allows the model the ability to be…
I made a retainer sleeve that slides on the front spindles and seals off the inside of the front wheel bearings from contamination. Since hub seals are not possible one these machines due to factory welds that are typically around the…
Print Settings Nozzle: 0.4 mm Layer height: 0.15 mm Support: No Avoid crossing perimeters: Yes First layer speed: 10 mm/s Z-offset: −0.05 mm Bed sheet: textured (satin) recommended Notes For Casio MRW-200H . Removing or installing the…
