Counting matching models…
In the mid-1950s, the United States had an unconditional superiority over the USSR in nuclear weapons, although thermonuclear charges had already been created in the USSR at this time. (WIKIPEDIA) also called Big Ivan , a Soviet…
This model is designed with inspiration from the Holy60 but for the Monsgeek FUN60 Pro . I don't know if the case will work with other PCBs. The case does not account for the battery, as I don't use the wireless functions. Printed on an…
This is my attempt to make a grip to make the win600 a little more comfortable and usable. Its not perfect by any means, and likely would be best used with stick covers, but it is a large improvement over stock. The fit is intentionally a…
The film door latch on the Nikon N6006, N5005, and N4004 (F-601, F-401X, F-401) is notorious for breaking. Replacements are often over $10 for a piece smaller than a fingernail, so I modeled one and want to release it for free! This…
Here's a GoPro chin mount I made for a friend. Please use cautiously and use strong adhesive/-tape!!! Suggested 100% infill and done in PETG, ASA or other strong materials.
I am using a cheap N600 generic flat burr grinder and the V2 is designed to slot the bottom side of the plate against the bottom bar
Fits the Nolan N60-6 helmet like a glove, you will need additional 3M VHB 4991 2.3 mm adhesive. For best results use PETG for added strenght and the following settings: 4 walls 45% Infill Enable support
Remixed some models so I could attach a Nexigo N60 to the x-axis gantry of a SV06. I printed mine in PLA 0.25mm layers, and it's been working great with the camera mounted.
This might not be the most beautiful reverse engineering but it saved my AKG headphones from the landfill. If the this piece of your AKG headphones has broken, this will fix it.
Rain pipe Adapter for Dn60 to DN53 rainpipe. print in PETG with 0.2 Layerheight. wall thickness is 1.8 mm
Keep your lens safe and dust-free with this 3D printable lens case. The case is designed for a Yongnuo YN60mm F2 MF macro lens and has a threaded lid design. Size: 15.7 x 9.7 cm (assembled) Weight: 50 - 150 grams Print time: 10 - 15 hours…
Wall mounted holder for the slicing disk and the drive arbor of a Ninja BN601 Food Processor. It should hold things pretty well, but I make no safety claims/guarantees.
Remixed the mounting part to allow this arm to attach to a SV06 frame. The pin is unmodified from SavageLau's original design, and the mount was modeled after his frame mount. Please check out their model and give it a like. Please get…
This is an adapter to connect a DN60 rainwater pipe to a DN50 HT pipe. I did not find such a product in the stores, so I decided to design one. There is 3 models available: dn60-dn50-symmetric.stl Standard adapter (centric and symmetric)…
A 2 part modular rack mount for the Asus Chromebox CN60 | CN62. Add this mini PC to your homelab with ease! If you wish to know how to remove Chrome OS on this device, please follow the steps here: https://docs.mrchromebox.tech/ This…
For my latest dust extraction cyclone project stage I chose to use DN60 sockets because I am using 60mm suctiion hoses in my workshop and the DN75 I used in stage1 of my project was too clumsy to design with. So here is my adapter for…
3D Model: DeepCool AN600 Adapter for AMD BC-250 This 3D-printable mounting solution allows the installation of a DeepCool AN600 cooler onto the AMD BC-250 motherboard. Installation Hardware: Bracket Requirement: This adapter is designed…
Uses 2x #6 screws. Print in anything rigid besides PLA, it will be too brittle and snap in a few months, if you need to bend it again I needed a mount to hold this old N600 wireless router I am now using as a switch. I plan to configure…
Couldn't find those anywhere so I made up something quickly, they work fine I printed mine in PETG, anything else should work too. To fit you slide the guard from the side, there is a stopper on the other end, with a well calibrated…
Die Gewinde sind nicht abdichtend, müssen es aber für diese Funktion auch nicht sein. Legen Sie den Behälter bei aufgeschraubtem Adapter nicht hin. Drucken Sie das Teil ohne Stützstruktur und orientieren Sie es mit der Sägezahn- Gewinde-…
Don't have a 3D printer? Email me at [email protected] and I'll print for $70+shipping Tested and confirmed working for LG 32GN600-B Works for 32GN500, 32GN500-B, 32GN50T, 32GN50R, 32GN600. Please read the instruction manual before…
Kabuflex connector DN60, two pieces. Glue them together and you have a one connector for DN60 hose.
Obudowa zasilacza do montażu wentylatora 60x60x15 12v. Montaż zasilacza z boku przy zabudowie dualZ
Fits the Nolan N60-6 helmet like a glove, you will need additional 3M VHB 4991 2.3 mm adhesive. For best results use PETG for added strenght and the following settings: 4 walls 45% Infill Enable support
A diffuser for a Yongnuo YN600EX-RT flash. This model was created from scratch, but inspired by this mode: Yongnuo 560 Diffuser by user @DigChaos_633 . There are 2 variants: big and small (in case you want a bit better portability).…
I purchased a Topton N6005 fanless mini PC, but it runs quite hot, when I have it hidden away in a cabinet. So I designed a very simple fan mount for a 120mm fan in Tinkercad - it is held in place with friction. Print two pieces, mount…
This is an extension for N60 Camera Mount Arm for SV06 with 34×37mm ⌀2mm screwholes. It fits into the slot fot the Camera and extends it outwards by about 100mm. I needed this to mount a camera with a broken base at a greater distance.…
This is so you can mount a laptop on the back of your 32" QHD LG monitor. This fits on the top of the monitor stand and will help stabilize your laptop on the back, but you may need some other parts depending on how you need to tilt it. I…
A 120mm fan mount for the “fanless” Topton N6005 router PC. It lets you securely mount a fan without case modification. Similar to https://www.printables.com/es/model/303732-fan-mount-for-topton-n6005-case but I designed it with holes to…
