Counting matching models…
Card Slinger 3.0 for MTG / ManaBox App- Easily scan in bulk quantities of cards by hand - Now for sleeved and un-sleeved cards You MUST print the base and insert in transparent or white filament, it will not work properly otherwise.…
V poslednej dobe ma fascinujú kĺby, ktoré sú potlačené s Tlač na mieste. I have had this model in my head for a long time, finally after several tests I managed to realize it. It is a round Clip with movable arms and diameters of 20, 25,…
Result of office Avocado seed floater challenge. Printed in ONE piece. Mechanical lock. It is easy to open when the roots come out. Before use, you cut out the 1 layer brim between the lock.
more recent version: https://www.printables.com/model/1083785-robot-hand-v2 A robot hand: print in place, but posable via the embedded tightening screws. Slice with standard Cura PLA 0.2 mm layer / 0.4 mm noozle. No brim, No support…
READ BEFORE PRINT PRINT FISH WITH 5% INFIL TO FLOAT PRINT HOOK WITH 100% INFIL TO SINK PRINT REEL WITH PETG TO AVOID BREAKAGE USE SUPPORTS ON POLE USE BRIM ON REEL HANDLE Reel snap fits into the attachment once on the pole. Be careful…
I've seen other Minecraft diamond ore lamps in various places by they all seem to lack the definitive pixelation that Minecraft embraces. By leveraging techniques used from 3D printed lithographs and some of the features of the latest…
This is a cookie cutter in the shape of a cannabis leaf. The shape isn't the most realistic because it's designed to make cookies that don't have any weak areas that would make them too fragile to be practical. Cookies made with this…
Create a Naboo Starfighter! If you like this model, please throw me a like. Designing the models is time, filament and coffee consuming. If you want to support my work bye me a coffee (PayPal). Thanks! Check out my other models.…
http://www.prusa3d.com/#a_aid=3090
Ayarlanır türk araba plakası. kullandığınız slicerdan (creality,orca,anycubic) .3mf dosyasını açtıktan sonra, objeler sekmesinden istediğiniz renkleri verebilirsiniz ve yazıyı ayarlayabilirsiniz. Araba plakalarında kullanılan font din…
Remix from: https://www.thingiverse.com/thing:4600435 Same seige tank, but you can move the turret now. Supports required. Print Settings Printer Brand: Creality Printer: Ender 3 Supports: Yes Infill: 20% Category: Vehicles
openable poke ball 3 files loaded upper part lower part stick you can use 1,5mm or 2mm long screw instead of stick original size 80mmx80mm
Since there are obstacles under my desk and the drawer size is limited, common drawers cannot be fully opened and are inconvenient to use. I designed this drawer that can be fully opened. There are 2 trays with a total of 5 parts that…
Dakshinabhimukhi Ganesha is the rare form of Lord Ganesha whose trunk curves to the right, symbolizing discipline, focus, and powerful spiritual energy. Associated with the solar (Pingala) energy, this form is believed to remove deep…
Lock up your stash! This is a remix, modified so I could attach a set of keys. I thickened it up and extended the stem, then made a hole thru it for a keychain.
Turnable Nespresso Tower in two versions: Standard Version to store 42 capsules Extended Version to store 60 capsules Optional Covers There are a few different covers you can choose: blank cover with text: Coffee Time with coffee cup 3…
Divine Beast Vah Naboris : Legend of Zelda Breath of the Wild
The painted stones, especially those heavy ones are usually arc shaped and common plate stands have no chance to hold it in position. This is the reason i made this positionable plate stand. I printed it from PETG and PLA. Both materials…
IKEA don't sell replacement glass lampshades for their common TÄRNABY table lamp, so this was my solution… Original single walled vase mode print worked well but was a little flimsy so I decided to use a lattice vase mode technique I've…
Just print it :)
Miniature of Real Madrid stadion Print Layer high: max 0.3 mm infill: 15% material: PETG, PLA
The amazing Voice Assistant finally has a vertical stand! In fact, now it has three : The original stand, which has no backing for the device. It's elegant (you can see it in the photo), but some have rightfully complained that they feel…
Two models included. Full build and 2 parts with an 8mm dowel. you can print one or use a wooden dowel. I recommend printing separately without supports.
One of several custom lamp shade designs for the ikea Tarnaby. This one has attractive vertical ridges for a retro look. Works best in slow hot printed transparent materials for that nice and clear look. I printed mine in transparent pla…
Note: This design is not mine. The original creator of these parts is pekcitron . The parts were reworked by jltx and uploaded here . Many of you will never find / have found these parts on Thingiverse, but since I think this upgrade…
I have an updated version at the following link https://www.printables.com/model/753753-3d-printed-marching-tenors-with-attachements Small tunable drums using standard drum heads and 10-32 x 1-1/2" screws. This was modeled in Fusion 360.…
Join the E-Nable association and offer a 3D printed hand to children! Rejoignez l'association E-Nable et offrez une main imprimée 3D aux enfants! https://e-nable.fr/…
Based on djkrice organizer for SO-DIMMs. Fits 10 DIMMs, can fit more if you edit the .scad (it also has the measurement for SO-DIMMs). Can be stacked. The honeycomb pattern on the bottom is to save filament without being detrimental to…
Info: well, I have jumped into the “remote holders contest” (for hiding them in a convenient way) too late, but I finished this model (and printed 😀) just on time design is parametric (see source file), so any book width/height is…
I originally made these doors for the Resident Evil 2 board game to integrate with the modular walls that I created, but then I got to thinking that someone might like to use the doors without the walls... so I made these! It's a real…
This is the Star Wars S5 Heavy Blaster that appeared in both Episode i and II I was surprised by the lack of models and pictures available for this model. While searching for reference material for this I did find out the original prop…
Eine Radnabenkappe mit Toyota Logo Wheel center cap with Toyota logo
Symbol cannabis for use ashtray or decor, very nice
Basics & Demo This display case tightly fits onto the Taurus cooling duct, version 2 and up. You can find this cooling duct here: https://www.printables.com/model/511962 If you're not already running a Taurus cooling duct that you are…
Please like before downloading the model . Thank you so much for your support ✌ relief set model the model is thicker, so the bottom part can be cut off as desired ZIP folder contains stored in STL/OBJ 1.STL/OBJ X205xY96xZ6 2.STL/OBJ…
A pokeball that opens and closes. Great for a costume prop. Printing Print as oriented. All parts need supports. The black rings should use “organic” or “tree” supports. Everything else can use “snug” or regular supports. Post Processing…
Hello, i always have trouble to create nice silicone joints and startet to look for some handy tools. I saw some good tools in wood, but they were very expensive (4€ each size). Good we have 3D printers, so i designed some and tested…
After printing the original model of the Runabout i wanted te build a bigger version. One that could have LED lights installed to make the model come to life. The model is 1/70 scale and so the total length of the model is 33 cm (13…
I have mirrored the model of the Y-Rod holder of the MK3s+, so that the upper part is removable and the axles can be taken out upwards. Compared to the original Y-Rod bracket you need a total of four additional square nuts and bolts. Make…
Are you a grow-er, not a show-er? It's a bit cold out there, huh? REAL cold, I hear. Well this is one giant collapsible beat-stick that WON'T leave you hanging. It can extend, collapse, uh... well that's about it, but it looks sick as…
Found it somewhere in the net some long time ago and I cannot find it anymore - maybe someone could use it. 4 perimeters, 0.15 layer height, paint support (check picture), use skirt when printing with ASA (I used 40 layers).
This is a project I put together as a gift for my niece. I've only made the one and I was super pleased at how well it came out! I used the existing (Totoro)[ https://www.thingiverse.com/thing:12146 ] model by (Joo)[…
[update 2024-01-01]: i have fully redesigned the joint, now it is easier to print, the connection to the ball is stronger, and the screw is better too. I have not updated this model with it yet, i plan to do it in the coming weeks (also…
quick and easy symmetric keycaps
I sketched up a replacement for a hub adapter for a Revox B77, based on an old model I reverse-engineered inside PrusaSlicer with the measure tool. So far it seems to be working fairly well, and I'm quite happy with how it looks beside an…
Tištěno z ABS bez podpor.
.3mf dosyasını slicer ile açın. (creality ve orca slicer için iki ayrı dosya mevcut.) objeyi seçtikten sonra nesneler sekmesine gelip metin elementine sağ tıklayıp "metni düzenle" diyerek istediğiniz fontu ve yazıyı yazabilirsiniz.
02.03.2022 Thicker case version added To be printed with flexible material. Layer height 0.2, 100% infill, 4 perimeters, you should consider using a brim for better adhesion to bed. No supports needed. Fusion 360 file is available at my…
I wanted to present and share with you a project I worked on for E-Nable community that aim to make free and low-cost prosthetic upper limb devices for children and adults I 3D printed using Prusament PLA on my Prusa MINI+ and assembled…
Der Brillenhalter kann ohne Stützmaterial gedruckt werden. Ich habe den Brillenhalter am Garderobenspiegel angebracht. Dafür gibt es lösbare aber gut haltende Klebehaken (mit Schrauben) an denen der Brillenhalter verschraubt werden kann.…
As part of our school main project I printed this e-Nable Hand Prosthesis. The model is reverse engineered from Thingiverse in SolidWorks 2019/2020 SE. Print instructions https://www.thingiverse.com/thing:1453190 If you want the…
5 different shapes of snowflakes which are easily joins together with or without glue. Print time is roughly 1 hour if you print it on a slow machine. No special tricks are needed, only a perfect bed adhesion, level, and proper retract.…
Download my others models here Cannabis leaf decorated coasters, files available for both MMU and single extruder with color change. For single extruder prints the color changes are: For coasters: start with green turn black on 1 mm. For…
I recreated some classic (JDM-)wheels. They're approximately 1:3 scale and have an diameter of around 13.5cm and a width of around 9cm. They're not a perfect copy as I drew them just after some pictures from the internet. Print them as…
Based on the original rod holder for the Y-axis I modified them to be openable without unmounting and calibrating the Y-carriga when for example bearings have to be changed. Only one screw is need for each holder. On the two holders for…
Support de smartphone créer suite a la formation en impression 3D “La biche renard”
This 3-gear extension designed specifically for the Chainable Gear Fidget Kit ! While the original kit focuses on single connections, this Tri-Gear Module introduces a compact 3-gear meshing arrangement that connects into the existing…
This print-in-place openable backpack will fit both “EASY 13” and “MINI 13” poseable jointed figures by soofazone , which have a slot for a rectangular pin on the backside of the chest piece - as opposed to “LUCKY 13” , for whom this…
A remix of Sven Brähmer ’s Telescope to Phone Adapter (Over-Engineered) . Sven's model is awesome, as it allows for fine tuning of each degree of freedom associated with attaching a phone to an eyepiece. I found that my phone shifted in…
Naběračka na psí krmení, granule , zrní , kukuřice atd... Scoop for dog food, granules, grain, corn ... Pokud se ti model líbil dej mu like, díkes. If you liked the model, give it a like, thanks.
1:24 Remix of my Miniwheel
100% Infill 0,10 Layer Make it in Geetech Glow in the Dark Green
Experience the thrill of piloting through the stars with this stunning 3D printable Naboo Starfighter STL model that brings the elegance of Naboo's royal fleet to your desk. This meticulously detailed starship figurine captures the sleek…
Hello 3d printers! I made a remix of a holder for Dolce Gusto cups which is also turnable/spinnable/rotable to get your favorite coffee cup within hand reach! It has storage for 3 x 6 (18) cups! Easy to get the cups out the dispenser and…
This is an easy turnable painting table and you only need one hand for it while you can paint with the other one! The small cubes are for holding the position for clueing it down or just hold the casing together which should no problem…
Edit : I resized the reinforcement to make them fit easier. The note range goes from C2 to C6 This will be a long......... journey to print, glue, paint, varnish etc.. Mine is almost done... It start to play for real. For the Print…
This is a version of the famous Gear Bearing by emmett - Thingiverse . I reduced the number of gears to 4 which lets you see the gears better. I also made it a bit smaller for a faster print. This is a great torture test for the MMU,…
Wenn man keine Radzierblenden verwendet sehen die Radnaben oft ziemlich hässlich aus. Die einfachste Option sind Abdeckkappen. Diese ist billig und einfach zu drucken. Ob die auch bei anderen Herstellern eingesetzt werden kann ist…
Hey Shaun was thinking of your awesome models and thought this would perhaps be a nice addtion, No pressure just a thought ; ) Cheers Jace Print instructions Category: 3D Printing
We have had this lamp proudly displayed in our home in our foyer for nearly a year now and we get lots of compliments on it! It is super easy to print. This lamp assembles from 12 sides all printed flat on the printer's bed, which then…
Beim LMC Vivo 530 K habe ich das Problem, dass die hintere Umrissleuchte im weg ist, wenn man die Dachstangen der Wigo abstützen möchte. Ich habe das Teil in PETG mit 25% Infill als Gyroid gedruckt. Das sollte ausreichen, muss aber jeder…
Instructions: Print both halves Clip them together (option) color the text with a marker or acrylic paint Cut a picture and put it inside (19x13 mm) This is a collection of all my valentines designs: ValentinesGifts Express your love in a…
Der Adapter für den Schlauchanschluss hat einen Außendurchmesser von 64 mm und auf der Zyklonabscheiderseite einen Innendurchmesser von 55 mm. Er ist geeignet für die Bajonettanschlüsse von Festool, Mafell, Metabo und Starmix. Der Adapter…
TL;DR Print your own socket covers. Motivation Needed some and didn't like the cheap looking white plastic trash optic while good looking ones are extraordinary expensive. I started with the dual one i needed and it was done in less than…
Nabeldecken für viele Serienfelgen der Marke Alfa Romeo mit 50mm Durchmesser. Original Artikelnummer: 60652886 Die Embleme gibt es sehr günstig aus China wie z.B AliExpress oder andere Gedruckt in massiv PETG. PLA ging bei mir nicht, da…
A compact and practical wind turbine designed for STEM projects, this model is easy to build using 3D-printed parts and recycled materials like a DC motor, bottles, and a broomstick. It does not include energy storage or electronic…
Device for supplying drip irrigation allowing to fill a set of bottles from any bottle of a circuit. Allows implantation away from the root system of plants and offers watering without going through the middle of the plantations…
Did you know 27 million business cards are printed every day - and 88% of those are thrown out within a week? That's 8 BILLION cards thrown out annually, or about 8,000,000 kg of waste. Business cards are still an essential part of…
Tunable torque wrench There are many good printable fixed torque wrench design for nozzle changing but most of them depend on the characteristics of the filament used to print the parts. This version is my attempt to solve that problem.…
Remix of https://www.thingiverse.com/thing:5128517 to allow printing TPU tyres on PLA rims. Also includes a 54mm diameter tyre to keep the same size as the original wheels. Print Settings Printer Brand: ELEGOO Printer: ELEGOO NEPTUNE 2S…
Authors: Anna King, Gregory Macke, Jackson Romelli, and Lillie Orians The body powered hook is a below the elbow prosthetic made to aid the user in pushing, pulling, grasping, and manipulating objects. The device was developed in response…
It's a copy of https://www.prusaprinters.org/prints/2128-mmu2s-ikea-samla-filament-spool but made to take up to 80mm wide spools (by request). The original is at https://a360.co/2w1B3e8 Change the parameter "Spool" to change the spacing.…
Mit dem Halter kann die Spülbeckenabdeckung im offenen Zustand arretiert werden, um ein versehentliches Zufallen zu verhindern. Der Halter besteht aus 3 Teilen. Das Unterteil wird mit einer kurzen Holzschraube an die Wand über dem…
A Ship of my own design based on the Naboo Starships in the Star Wars prequels. I've scaled it to be 1:1000 so its pretty big, but most of the details are ambiguous so scale as desired Below is how I created the model on Fusion360
As in the topic at the top. Key ring for keys or anything else. Key ring can be printed PLA, PET-G for sure as you can see in the pictures. The maximum reduction is 45 mm in height. The ones visible in the photos are 55 mm high. They are…
The broad dimensions of the roller blank are: 30mm diameter 60mm long 12.2mm square drive, 10mm deep. The roller has a 1mm fillet on the edges and 1mm chamfer on the drive. Using the circumference (PI x Diameter), I set out the repeating…
Doporučený materiál: PET-G Doporučená výška vrstvy: 0,2 mm Pro tisk nejsou potřeba podpěry. Pro zvýraznění textu je použita změna barvy vrsty. Pro montáž je potřeba šroub s válcovou hranou a vnitřním šestihranem M3 x 14 mm. Samojistná…
Es un soporte celular o porta celular reclinable, tiene un engranaje en la parte posterior que sirve para regular la inclinación del celular o tablet. Si se imprime en la posición que trae el .stl se imprime armado, no necesita soportes,…
Los módulos se sujetan de una guía, que debe fijarse a una superficie vertical. Pueden quitarse a mano simplemente subiéndolos, y pueden reordenarse a voluntad. Muy prácticos para tener relojes y anillos a mano y no sufrir intentando…
A refined version of the easter egg can be found here: https://www.printables.com/model/822685-openable-easter-egg-refined ------------------------------ I needed to create a "large" easter egg for my cousin's 2-year-old daughter. The egg…
The N-1 starfighter, also referred to as the Royal Naboo N-1 starfighter, Naboo N-1 starfighter,Naboo starfighter, N-1 fighter, or more simply, the N-1, was a single seat patrol craft developed by the Theed Palace Space Vessel Engineering…
Review pictures. Use the “wings” variant and zip ties to secure cables fixation.
Klasická originální nabíječka Oral , složená do obalu . Nikde neplandá kabel a je to vloženo přímo do zásuvky.Rozměry jsou pro českou zásuvku (220V - CZ). Složení dle přiložených fotek - nemělo by to být složité. Deska co je uvnitř patří…
If you want my Patreon exclusive models, any of above 3D models, new/upcoming models or need commercial license, please visit my Patreon . By joining, you'll gain permission to sell my models, exclusive designs and receive early access to…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Da gibts nicht viel zu sagen, einige der alten Radnabenabdeckungen waren hinüber, also musste Ersatz gedruckt werden (PLA). / Not much to tell about this, some of the old centerwheelcaps where broken down, so a replacement had to be…
Hallo alle zusammen , wer kennt es nicht ,man Hockt gemütlich beim Grillen zusammen, oder man Handwerkt draußen. und lässt seine offene Flasche Bier draußen stehen. Und bevor man es merkt hockt schon die erste Biene, Wespe oder ein…
